I have a friend in a different country, but everytime I try to message her from my IMessage (my number) it doesn't work. Can someone please help me here?
Basically. I have a friend from Australia, while I am from America. I met her on Twitter, blah, blah, blah. I'm trying to figure out how to message her with IMessage without using email. Because, I'm connected to my dad's ITunes account, so therefore, if I sent a message to her that way, my dad would get the too. MY number is hooked to IMessage, I checked. But, I just can't seem to message her from my phone, with my number with IMessage. It just sends as Text Message.
She must have an idevice. Her iMessage has to be on and connected to a source of data such as cellular data or wifi.
You would be fine as long as you use your number even on your dad apple account. Just as long as your dad uses his respective number or the account email as his iMessage then he won't be able to receive iMessages sent or receive from your number.
You must have cellular data or connected to wifi and iMessage has to be on in order for it to work as well.
Similar Messages
-
Hi, I am wondering why my iphone won't send pictures through messages, I have MMS on and I have tried sending it with 3G on aswell and still doesn't work. Someone please help me :)
Hey lozza567,
Thanks for the question. I understand that you are experiencing issues sending MMS messages. The following resource may provide a solution:
iOS: Troubleshooting Messages
http://support.apple.com/kb/ts2755
Issues with sending and receiving MMS
You will need these to send and receive MMS:
- An iPhone 3G or later.
- iOS 3.1 or later.
- A cellular data connection. MMS isn't available if you are using only Wi-Fi.
- A domestic MMS plan from your cellular provider. You may need an international messaging plan to send MMS to an international contact. Contact your carrier for more information.
- A roaming MMS when using a cellular provider's network different from your billing cellular provider's network. Learn more about roaming and contact your carrier for more information.
To resolve issues with sending and receiving MMS, follow these steps first
1. Go to Settings and turn airplane mode off.
2. Go to Settings > Messages and turn MMS Messaging on.
3. Go to Settings > Cellular and turn Cellular Data on.
4. Go to Settings > Cellular and turn Data Roaming on if you are roaming on a cellular provider network different from your billing provider's network.
5. Verify that you have a cellular data connection in the status bar at the top left of your iPhone.
6. Go to Settings and turn Wi-Fi off. Open Safari and navigate to www.apple.com to verify that you have a data connection. Turn Wi-Fi back on to continue using Wi-Fi for other features. If your cellular data connection isn't available, follow these steps.
7. Verify that you can send and receive SMS. If you are unable to send and receive SMS, see the "Issues with sending and receiving SMS" section, above.
8. MMS may not be available while on a call. Only 3G and faster GSM networks support simultaneous data and voice calls. Learn more about which network your phone supports.
9. Restart your iPhone.
10. Tap Settings > General > Reset > Reset Network Settings on your iPhone.
11. Reseat your SIM card.
If you are still unable to send or receive MMS, follow these steps
1. Make sure that the contact trying to message you isn't blocked in Settings > Messages > Blocked.
2. Go to Settings > Messages and turn on group messaging if you are sending a group message.
3. Make sure that you are using the area code with the contact's phone number. When sending messages internationally, you also need the contact's international code.
4. Verify a "Pay as you go" MMS plan has enough available balance. Contact your carrier if unsure of your MMS plan or available balance.
5. If the issue occurs with a specific contact or contacts, back up or forward important messages and delete your current messaging threads with the contact. Create a new message to the contact and try again.
6. If the issue occurs with a specific contact or contacts, delete and re-create the contact from the Contacts application. Create a new message to the newly created contact and try again.
7. Back up and restore your iPhone as new.
8. If your carrier has recently ported your phone number, the porting process may not be complete. Contact your carrier to confirm that the porting process is complete.
9. Contact your carrier to verify that you are provisioned to send SMS and are in an area with cellular coverage.
10. Contact your carrier to verify that there are no blocks or filters placed on your wireless account preventing you from sending SMS.
11. Your carrier may require APN settings to be modified to use MMS. Learn more about when you should adjust APN settings.
Thanks,
Matt M. -
I recently downloaded iMovie on my iPhone 5 and it is telling me to connect to wifi or use itunes to download iMovie well I have done both and it is still not working can someone please help me?
Hi troy157,
I'm sorry you are having issues with the iMovie app you purchased for your iPhone5.
The first thing I would suggest is to log out of your iTunes Account on your iPhone, turn the iPhone off and then on again, and see if app finishes downloading/updating.
Settings > iTunes & App Stores > Tap on your Apple ID account > Tap Sign Out
If the issues persists, the article below will give you a few more troubleshooting steps:
iOS: Troubleshooting applications purchased from the App Store
Try the following steps to resolve your issue, testing the app after each step.
1. Update your device software
Update your device to the latest version of iOS.
2. Check for app updates
Ensure that your apps are up to date:
Open the App Store and tap Updates. If updates are available, tap Update All.
When prompted, enter your iTunes Store account information. App Store will then download and install the application updates.
Note: Some applications may require a Wi-Fi connection to update.3. Install another app from the App Store
4. Restart the application
If the issue affects only a single app, try closing just that app:
Press the Home button to return to the Home screen.
Double-tap the Home button to display recent apps.
Tap and hold the affected app until the red minus appears.
Tap the red minus to quit the app.
Press the Home button, then restart the app.
5. Restart your device
Hold the Sleep/Wake button until "slide to power off" appears. Slide to power off your device. When it is off, press the Sleep/Wake button to turn it back on.6. Reinstall the affected application
Remove the application from your device and reinstall it.
Touch and hold any application icon on the Home Screen until the icons start to wiggle.
Tap the "x" in the corner of the application you want to delete.
Tap Delete to remove the application and all of its data from your device.
Press the Home button.
Go to the App Store.
Search for the application and then download it again.
Note: If it is a paid app, ensure you are using the iTunes account you purchased the app with originally. If it is not, you will be charged for the app again. For more information regarding downloading previously purchased items, see this article.
I hope this information helps ....
Have a great day!
- Judy -
i have been trying to download the newest itunes to my windows 7 computer wit the last 2 wks now... im at the stage where iv tried everting from uninstalling itunes to installing it again... can someone please help before i throw the computer out the window!
Here is what worked for me:
My usb hub, being usb2, was too fast. I moved the wire to a usb port directory on my pc. That is a usb1 port which is slow enough to run your snyc. -
I have the iphone 4 and I have tried to upgrade to iOS 7 and it says that the software upgrade is unavailable at this time. But it says that the Apple Inc. is downloaded. Can someone please tell me why this is so?
Well, yes. With millions and millions of users trying to download, the Apple servers are under stress. Wait until tomorrow.
-
I have recently just paid £2.99 to update my ipod touch 1st generation. and it still wont connect can someone help?
See
iOS: Device not recognized in iTunes for Windows
- I would start with the following unless you revoed and reinstall all Apple software, not just iTunes:
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
or
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
However, after your remove the Apple software components also remove the iCloud Control Panel via Windows Programs and Features app in the Window Control Panel. Then reinstall all the Apple software components
- New cable and different USB port
- Run this and see if the results help with determine the cause
iTunes for Windows: Device Sync Tests
Also see:
iPod not recognised by windows iTunes
Troubleshooting issues with iTunes for Windows updates
- Try on another computer to help determine if computer or iPod problem
Next try posting in the iTunes for Windows forum is still problem with iTunes -
I have an ipod touch 4g. I did not have wifi for three days and when I came home my friends said they texted me when i didnt have signal. The messages i received when i did not have signal are not showing up. Can someone please help me?
You said "The messages i received when i did not have signal are not showing up."
How do you know received them?
If the sender got a message that the Messagers were not delivered than they were never delivered and the only way for you to get them is for the sender to resent them -
Dear Friends, I am trying to draw a structure in Adobe Illustrator with 3D effect. But I am unable to give it proper shape. Can someone please help me for drawing the similar structure as showed below. I have facing problems in giving 3D effect.
Thanks a lot for your great help...i made a quick example:
and what it's made of:
just shapes and gradients. used a combination of pathfinder and shape builder to get the shapes exact. -
hi... can someone please help me.. i want to download the latest ios, but do not have the software update option in the general settings....
Connect it to iTunes on a computer and update it from there.
(73609) -
Can someone please help me re-install my Creative Design 5.5 on my Mac? My MacBook Pro recently crashed and had to have the hard drive replaced. The back up from Time Machine is not reinstalling the program. Since I have the download paid, and codes, I need direction on how to reinstall -- HELP?
Hi bodegakc,
If you have the serial number then please use the below mentioned link to download the product you are looking for .
CS5.5
Also before installing Please go to Applications-->Utilities--> Adobe installers and if there is any uninstaller for CS5.5 , you can remove it and do a fresh install.
You can also use creative cloud cleaner tool before installing.
Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6
Thanks
Nikhil Gupta -
can someone please help me as its not letting me turn it on. i have tried to start it up pressing both buttons connecting to itunes and its not working still., it wont even charge or show apple icon anymore,
You may not get a response as you are shouting at everyone.
All caps indicates shouting, is considered rude, and is difficult to read.
Many will not read such posts.
Try turning off you caps lock and asking again. -
Hi,
My iphone 4 won't connect to my mac book, it says that I need to install to latest version of itunes 11.1. When I go to itunes and try to update, it says that I have the latest version (10.6.3). Can someone please help me!
thanksYou are probably running OS 10.4 or 10.5 on a PPC Mac. No version of iTunes higher than 10.6.3 is available for these older Macs. I have the same problem, and while I can still use the PPC to sync my iPod, it can't be used to sync an iPhone 4 or higher. The only solution, as I discovered after upgrading to the iPhone 4, is to buy a newer Mac. I was able to get a 2006 MacBook running Lion for under $300, and that has been a lifesaver.
-
My safari keeps closing unexpectedly and when it does it tells me that it quite while using the .GameHouseBeachParty.so plugin. I have no idea what this means! Can someone please help me fix this?
You have the Flashback trojan.
Check out the replies in this thread for what to do;
https://discussions.apple.com/message/18114958#18114958 -
I imported all my pics to Iphoto and I can't open/edit them now. When I double click on them, I only get an exclamation mark. Please help me I don't have copies. I tried burning them to a cd but it didn't work. Can someone please help me?
The ! turns up when iPhoto loses the connection between the thumbnail in the iPhoto Window and the file it represents.
What version of iPhoto? Assuming 09 or later...
Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Rebuild iPhoto Library Database from automatic backup.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one. .
Regards
TD -
I updated my iPad mini to ios 7.0.2 couple days ago. Everything was fine until yesterday. I noticed that it seemed to have a mind of its own. It kept opening and closing app. I'm not sure what to don to fix this problem. I've tried restoring my iPad mini but that didn't help. Can someone please help me?
Try This...
Close All Open Apps... Sign Out of your Account... Perform a Reset... Try again...
Reset ( No Data will be Lost )
Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
Wait for the Apple logo to Appear...
Usually takes about 15 - 20 Seconds... ( But can take Longer...)
Release the Buttons...
If no joy...
Reset all settings
Settings > General > Reset > Reset all Settings.
This will return all iDevice settings to factory defaults... you will not lose any data.... But you will have to re-enter all of the device settings.
If the issue persists...
Connect to iTunes on the computer you usually Sync with and Restore
http://support.apple.com/kb/HT1414
Make sure you have the Latest Version of iTunes (v11) Installed on your computer
iTunes free download from www.itunes.com/download
Maybe you are looking for
-
(Eng/Esp) Problem with .SWF in DW/Problema con .SWF en DW.
Hello, Sorry for my English, im learning, but im not yet a expert. I have problem with my Dreamwaver, when I put a .swf (I've done my web with Flash) and press F12 i cant see my SWF. And the error mensager is the follow: Could u help me, plz? Thnx.
-
Odd behaivior of javaMail in OC4J
Hi Thank you for reading my post I have a web application which uses java mail to send some emails to its user , the application users a 3rd party email address and server to send emails. when i test the application on my local computer it works fine
-
Adding different device to bbid
I have a blackberry id that I set up for my previous blackberry bold 9650. However, this device was liquid damaged and my brother has lent me his blackberry tour 9630. He never activated the blackberry service on this device and I would like to know
-
IPhoto quits unexpectedly constantly
iPhoto 6.0.5 quits after a period of time, after attempting to select music from iTunes for a slideshow, etc. I have done a complete rebuild (using command+option at iPhoto startup) and a manual rebuild but nothing has changed. I recently (August 200
-
How to kill back ground processes?
I had installed Amonitor app and it shows there are these 3 processes, poc-bbot, bash, cp running. It was never there. can anyone tell me how to kill it?