I have a G5 imac that is using Disk Warrior as the start up disk and can't change back.

I am using a G5 imac (OS 10.4.8 I think the last update is) and I was attempting to use Disk Warrior to recover a lost file. On my other Macs you made Disk Warrior the start up disk to use it, which I did here but I think that was a mistake. Now I can't change back to the regular start up disk.
I tried starting in safe mode but I think I'm getting kernel panic because it goes to a gray screen and tells me to restart.

I don't think Disk Warrior does file recovery. See:
Basics of File Recovery
Files in Trash
If you simply put files in the Trash you can restore them by opening the Trash (left-click on the Trash icon) and drag the files from the Trash to your Desktop or other desired location. OS X also provides a short-cut to undo the last item moved to the Trash -press COMMAND-Z.
If you empty the Trash the files are gone. If a program does an immediate delete rather than moving files to the Trash, then the files are gone. Recovery is possible but you must not allow any additional writes to the hard drive - shut it down. When files are deleted only the directory entries, not the files themselves, is modified. The space occupied by the files has been returned to the system as available for storage, but the files are still on the drive. Writing to the drive will then eventually overwrite the space once occupied by the deleted files in which case the files are lost permanently. Also if you save a file over an existing file of the same name, then the old file is overwritten and cannot be recovered.
General File Recovery
If you stop using the drive it's possible to recover deleted files that have not been overwritten by using recovery software such as Data Rescue II, File Salvage or TechTool Pro. Each of the preceding come on bootable CDs to enable usage without risk of writing more data to the hard drive. Two free alternatives are Disk Drill and TestDisk. Look for them and demos at MacUpdate or CNET Downloads.
The longer the hard drive remains in use and data are written to it, the greater the risk your deleted files will be overwritten.
Also visit The XLab FAQs and read the FAQ on Data Recovery.

Similar Messages

Imac have black screen. Start Computer sound come on, no picture. The last time I used the computer I put it to sleep, it never came back. i tried everything that was suggested including puting in the start up disk. The disk would not eject. Some one

Imac have black screen. Start Computer sound come on, no picture. The last time I used the computer I put it to sleep, it never came back. i tried everything that was suggested including puting in the start up disk. The disk would not eject. Some one suggested how to remove it and that did work. Computer going to Apple hospital Tues. July 3, thank you for all the suggestions.
Phyllis33

There is nothing wrong with the OS update.
Delete ALL your email accounts.
Restart Playbook
Put the accounts back and ensure they are all set with PUSH ON. Manual (push off) will burn battery.
Similarly delete your wifi connections and add back when required.
Turn off wifi is not connected to wifi.
Any "hunting for connection" in email or wifi will burn up battery.

Greetings, I have an iPod Touch, that I recently tried to access the apps store. I can't enter my password, due to not being able to switch the keyboard to lower case letters. I tapped on the arrow up button, and it makes a click sound, but the letters do

Greetings, I have an iPod Touch, that I recently tried to access the apps store. I can't enter my password, due to not being able to switch the keyboard to lower case letters. I tapped on the arrow up button, and it makes a click sound, but the letters do not change. Am I doing something wrong?

Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.

TS1365 I have a mac pro that when i turn it on the sleep light blinks and makes a beeping sound but my screen is black. Any idea's as to why this is happening and how do i fix it?

I have a mac pro that when i turn it on i get a black screen and the "sleep light" is on but i also get a beeping sound. How do i fix this? I have powered off turned it back on and tried the command, option, P, and R and still nothing

Welcome to the Apple Support Communities
How many beeps do you hear?

Using a garmin sat nav device, when planning a route on the mac it always defaults to the same far away location as the starting point. How can I change this?

Whenever I start route planning using Garmin Connect, the map opens at the same distant location every time, by default. How can I change this and make it open at my own location?

Hello Cgifford,
Welcome to National Instruments Forums.
To output your signal to the PFI lines,
you can use external connectios between OUT0 and PFI lines. You can also use
the backplane to do so by routing into the same RTSI line.
1)
On the SCOPE and FGEN, the name of the
terminals are actually “PXI Trigger Line x/RTSIx” but on the 6602 you might
need to route the signal using the property:
You can also use the DAQmx route signal which perform the same opperation.
2)
This will depend on the frequency of
your pulse train. If this is lower than about 10 ms, then you can probably
place this on a loop and start and stop the acquisition every time. If the
frequency is higher than this, you will have to use:
- Scripting on the FGEN side (read more)
- MultiRecord Fetch (more information in the scope help file
section “Acquisition Functions Reading versus Fetching”).
3)
The short answer is yes. The longer one
might depend on how tight you need the synchronization to be (us, ns, ps). For
very tight synchronization, you should look into here.
Message Edited by Yardov on 06-18-2007 03:14 PM
Gerardo O.
RF Systems Engineering
National Instruments
Attachments:
property.JPG ‏7 KB

I have $0.36 left from a US gift card and can not change back to my home country's region until I spend it. How can I spend 36 cents?

I recieved a US iTunes gift card for christmas and could not use it with my Canadian account, so I changed the region to US in order to use the points. Now I've used up everything I can except the $0.36, and I'd like to enter my Canadian address and credit card back in, but it won't let me until I use up the US amount. What can I do? I'm trying to spend my money in the apple store!

Click here and request assistance.
(77983)

My granddaughter put the Start Up Disk in the drive inadvertently and now the drive will not eject it or start up using the HD. I have tried all of the suggestions for opening it that appear in the manual. Help?

My granddaughter put the Start Up Disk in the drive inadvertently and now the drive will not eject it or start up using the HD. I have tried all of the suggestions for opening it that appear in the manual. Help? It is her computer, a iMac G3 or G4 with superdrive, the one with the ball shaped base. Thank you.

It's a tray loading drive, there should be a little hole next to it, just large enough for a paper clip. Stick the end of the paper clip in it and the tray should open.
Miriam

I have a 21" iMac that only boots as far as a folder icon with a question mark in it. Anyone know what this means and how to fix it?

I have a 21" iMac that only boots as far as a folder icon with a question mark in it. Anyone know what this means and how to fix it?

It usually means your OS has corrupted files. You need to reinstall OS X.
If you are using Snow Leopard:
Reinstall OS X without erasing the drive
Do the following:
1. Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Reinstall Snow Leopard
If the drive is OK then quit DU and return to the installer. Proceed with reinstalling OS X. Note that the Snow Leopard installer will not erase your drive or disturb your files. After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
Download and install the Combo Updater for the version you prefer from support.apple.com/downloads/.
If you are using Lion:
Reinstalling Lion Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall Lion: Select Reinstall Lion and click on the Continue button.

I have an older iMAC that once burned CD's with no issues. Now I get an error message saying "The attempt to burn a disc failed. The device is not accessible, probably because it was removed". I have never had it touched so the device was not removed.Help

I have an olde iMac that once I have an older iMAC that once burned CD's with no issues. Now I get an error message saying "The attempt to burn a disc failed. The device is not accessible, probably because it was removed". I have never had it touched so the device was not removed. Please advise as to what could be the problem. How to fix. Thanks

Try resetting the SMC and PRAM first, if that doesn't help try a cleaning disc.....and then buy an inexpensive external burner. Slimline super drive failures are all too common.
To reset the SMC
Shut down the computer.
Unplug the computer's power cord.
Wait fifteen seconds.
Attach the computer's power cord.
Wait five seconds, then press the power button to turn on the computer.
Resetting NVRAM / PRAM
Shut down your Mac.
Locate the following keys on the keyboard: Command (⌘), Option, P, and R. You will need to hold these keys down simultaneously in step 4.
Turn on the computer.
Press and hold the Command-Option-P-R keys before the gray screen appears.
Hold the keys down until the computer restarts and you hear the startup sound for the second time.
Release the keys.

I have an iphone 4 that i use as an iPod. it is not connected to a telephone company. I updated to ios7 and now it won't sync with my computer

I have an iphone 4 that I use as an iPod. It is not connected to a wireless network. I have updated to the IOS 7 and now it won't sync with my computer. Does anyone know what could possibly be the problem?

Contacts are designed to be synced to a supported application on the computer or a cloud service.
Pictures taken with the device are designed to regularly be copied off the device to a computer as would be done with any digital camera.
If you have failed to use the device as designed it may be too late to recovery anything.
Is the device regularly backed up to a computer via iTunes? If so, the most recent backup (when restored to a replacement iOS device) should contain all contacts and pictures as of when the backup was created.

I have a Macbook Air that had some coffee spilled on the keyboard and as a result the plus/equals key is no longer functioning. Can I use a program like Ukelele to reprogram a different key to be my plus/equals key? Can I program a function key? key

I have a Macbook Air that had some coffee spilled on the keyboard and as a result the plus/equals key is no longer functioning. Can I use a program like Ukelele to re-program another key to do that function? Can I re-program a function key to do this function?

Water + electronics do not mix. Something was damaged insode, and the logic board may be corroding as is.
Take it to a Genius Bar for an evaluation and repair estimate.
This is accidental damage and not covered by warranty.

I have moved from the US to Norway, and want to change my apple ID to the Norwegian appstore. However, I am not allowed ot change from the US store before I use up my balance, which is 0.17 dollar. The problem is that nothing costs 0.17 dollar.Please help

I have moved from the US to Norway, and want to change my apple ID to the Norwegian appstore. However, I am not allowed ot change from the US store before I use up my balance, which is 0.17 dollar. The problem is that nothing costs 0.17 dollar and I do no longer have an american visa card, only Norwegian. Is there any way I can erase the credit on my account so I can change the appstore country? Or osmething I can use this credit on? Thank you very much

Try contacting the store support staff at: http://www.apple.com/emea/support/itunes/contact.html they are usually pretty good at sorting out these issues.

How can i get option to approve or reject an emial in outlook in mac such that once i click on approve, the email is sent and if i click on reject it goes to sender (within our workgroup), i used to have it in windows

how can i get option to approve or reject an emial in outlook in mac such that once i click on approve, the email is sent and if i click on reject it goes to sender (within our workgroup), i used to have it in windows

Better ask on the Microsoft forums where the Office experts hang out as it's Microsofts product you're have questions about
http://answers.microsoft.com/en-us/mac

I have an Ipod touch that was used on one computer but the computer got a virus and crashed and got rid of everything. I have a new computer now so how do I transfer the music from the Ipod touch to the itunes on the new computer without losing the music

I have an Ipod touch that was recognized as its host on one computer but the computer got a viruse and crashed and got rid of everying. I have a new computer with itunes now, so how do I have the ipod touch recognize this computer as its host computer without losing all of the music I have on the ipod touch?

I have an Ipod touch that was used on one computer but the computer got a virus and crashed and got rid of everything. I have a new computer now so how do I transfer the music from the Ipod touch to the itunes on the new computer without losing the music

HT1631 I don't have an encrypted code, I didn't use my vault file upon starting my computer and I didn't associate it to my apple ID. I bought a refurbished macbook pro (10.7.4), and now I forgot the administrator password. how can I reset that?

I don't have an encrypted code, I didn't use my vault file upon starting my computer and I didn't associate it to my apple ID. I bought a refurbished macbook pro (10.7.4), and now I forgot the administrator password. how can I reset that?

A bug has been filed: https://bugzilla.mozilla.org/show_bug.cgi?id=644566 .

I have a G5 imac that is using Disk Warrior as the start up disk and can't change back.

Similar Messages

Maybe you are looking for