I have a good connection thru both wifi and ethernet but cannot get to the internet

I have a good connection thru both wifi and ethernet but cannot get to the internet

Which model iMac do you have? Which OS system is currently installed on your comp? 

Similar Messages

  • Visual internet connection, but cannot get on the internet? Help:(

    Hi people.
    My wife bought me an Ipod touch. This is a long time ago, because I cannot use it with my wi-fi connection home. I took it with me to my parents, and it worked without any problems there. I took it with me to my place, and I got the same problems.
    It says that I got connection and I have the Wi-fi connection icon, but I'm not connected to the net.
    I've tried to connect many times. I've deleted and restarted the thing. I've looked at the IP adress, and it started with 169. I've tried to look at this discussion board, but haven't found any help.
    I'm getting quite desperate, and I would like to get some help. Since I am quite a beginner, I would like a simple answer:) But any help will do great.
    Thank you

    I've looked at the IP adress, and it started with 169.
    This means you aren't actually connected to the Internet; only to your router.
    An easy first attempt at a fix is to turn your router off and then on again.

  • Connected to router but cannot get on the internet

    Hi,
    I have connected my sons laptop to home hub 3 and it is showing connected to router but when we try to connect toonternet we get error message,have tried connecting to lots of different web pages without any joy.
    Laptop will connectto other wireless when we are not at home. Really not sure where we are going wrong.
    Can anyone help?
    Thanks

    Couple of things to check:
    1) Are you using the wireless passkey that is on the Homehub label to log on with?
    2) It could be that your computer has IPv6 selected. Try disconnecting it as follows:
    Select Start
    In the search field type.ncpa.cpl and press enter.
    In the new window right click on your wireless network connection and select properties
    In “This connection uses the following items” section remove the tick beside Internet Protocol Version 6 (TCP/IPv6) then press OK
    Left click on Internet Protocol IPv4, click properties . Check the options to obtain IP addres and DNS server address automatically.
    Once done try and connect to internet.

  • Lost the ability to connect to both WiFi and Bluetooth on my iPhone 4S.  Any suggestions on how to fix this?

    Lost the ability to connect to both WiFi and Bluetooth on my iPhone 4S.  Any suggestions on how to fix the problem?

    Have you followed http://support.apple.com/kb/TS1559 ?
    Also try settings>general>reset>reset all settings
    If you have followed that article and restored your phone and set it up as new and you're still having that issue you may call and explain you followed the article and are still having the problem. Most likely they will either set up a replacement for you. If they ask you to set up the one time phone support agreement, and they assist you with a restore again, they won't bill you if they end up having to repair it.

  • Have one WiFi signal into the apartment for my Air, and another wifi signal for my 5c phone plan. Both from the same provider. Expensive. Is there a way to 'combine' WiFi signals so I pay only for one, but can get on the Internet with my Air?

    Have one WiFi signal into the apartment for my Air, and another wifi signal for my 5c phone plan. Both from the same provider. Expensive. Is there a way to 'combine' WiFi signals so I pay only for one, but can get on the Internet with my Air?

    Roamingnome, thanks for your response. Although I have been a Bell (Canada) customer for my WiFi signal for years, the 5c and its necessary mobility plan, is very recent. Some years ago, Bell supplied its own ‘router’ for my computer, and claimed that it was possible to get their WiFi signal only with the router they supplied. When I recently received the 5c, I wondered if the plan it requires, which is within the much wider, overall Bell zone, could be used somehow to get my Air online - some sort of tethering? - that allows me to give up the Air WiFi service and router all together, but still get the Air connected. Here in Canada, Bell Mobility and other Bell services are very separate. Any suggestions appreciated.

  • I use an Epson Stylus Office BX320FW printer with my IMac.  Since upgrading OSX, I have lost the ability to print and scan.  I have downloaded printer drivers from both Epson and Apple.  I am using the printer in wifi mode but can not get it print or scan

    Hi Everybody,
    I use an Epson Stylus Office BX320FW printer with my IMac.  Since upgrading OSX, I have lost the ability to print and scan.  I have downloaded printer drivers from both Epson and Apple.  I am using the printer in wifi mode but can not get it print or scan.  How do I uninstall the Epson software and start all over again?
    nickel_man_65

    Not using any mouse pad, I have a very smooth desktop. But I just tried to use a sheet of A4 printing paper, but no result, the problem persisted.
    Someone on this forum suggested, that USB3 may interfere with the magic mouse.
    I have 2 LaCie HDD's about 70 cm away from the mouse, I use them on Thunderbolt. But in operation or not - the result is the same, the mouse plays up! Just now I was clicking the desktop and the mouse created a new folder!!
    Thanks for the advice, Bee
    Cheers, Gerd

  • I cannot sign into my apple id on my iphone 5, im trying to activate imessage.. im connected to both wifi and my mobile data is on- however it is still saying network connection error!? help?!

    i cannot sign into my apple id on my iphone 5, im trying to activate imessage.. im connected to both wifi and my mobile data is on- however it is still saying network connection error!? help?!

    Try this but you need a current email address:
    http://support.apple.com/kb/HE34

  • I have reset my iPod because it had been locked out and I couldn't get back in, but it will only reset once it connects to a WiFi source. I cannot get onto my iPod to connect it to a WiFi source. How am I meant to reset/erase it?

    I have reset my iPod because it had been locked out and I couldn't get back in, but it will only reset once it connects to a WiFi source. I cannot get onto my iPod to connect it to a WiFi source. How am I meant to reset/erase it?

    Just what do you mean by " but it will only reset once it connects to a WiFi source."?
    If it it says turn off FIndMyiPhone then:
    Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
    iOS: Wrong passcode results in red disabled screen                         
    If recovery mode does not work try DFU mode.                        
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings        
    For how to restore:
    iTunes: Restoring iOS software

  • My airport extreme (generation 5) was set up using wifi and has worked flawlessly (on macbook pro 2 iphones and window 7 HP pc)until recently. I have reset to factory defaults over and over but still cannot get on the internet. Any suggestions?

    My airport extreme (generation 5) was set up using wifi and has worked flawlessly (on macbook pro 2 iphones and window 7 HP pc)until recently. I have reset to factory defaults over and over but still cannot get on the internet. However I can then take my DSL cord and insert it in a different Ethernet port other than the WAN port and I can get internet on my Mac and iphones but only wifi on my husband's PC.  I hate to spend another $179 if this is just something I'm doing wrong. Please help

    I'm having a bit of trouble confirming that the ZyXEL is a combination modem & wireless-N router. If it is, then you really won't get any advantages of using the 802.11g AirPort.
    If the range of your ZyXEL is limited, you may find that doing either or both of the following will help: 1) Move the ZyXEL so that it is higher vs. lower in the room, that is away from any closed areas or placed in a metal cabinet, and 2) Changing radio channels. The latter is especially important in you live in an area where there are a number of competing Wi-Fi.
    A good utility to find out, is iStumbler. You would use this to find these other Wi-Fi and find which have the strongest signal value. Those that do, you would also want to note which channel they are operating on, and then, change yours to one that is at least 3-5 channels away. So, for example, if you find strong ones on channels 1 & 6, change yours to 11.

  • I tried updating iphone 6 to 8.1.3 But the phone went dead. I have tried using restore options - both update and erase, but the process stops when it tries to update Iphone firmware.

    I tried updating iphone 6 to 8.1.3 But the phone went dead. I have tried using restore options - both update and erase, but the process stops when it tries to update Iphone firmware.

    Put your phone in DFU mode,
    Hold the Power Button (3 secs)
    Continue holding the power button and also hold the home button (15 secs)
    Release the power button while continuing to hold the home button (10 secs)
    Your device should prompt with the "Connect to iTunes Screen"
    Restore.

  • HT4519 I switched to a Cisco Router model EA6500, in now periodically receive a message on both of my email accounts "cannot get email" the connection to the server failed"  it's happening on both by iPad and iPhone.  I've talked to Cisco and they couldn'

    I switched to a Cisco Router model EA6500, in now periodically receive a message on both of my email accounts "cannot get email" the connection to the server failed"  it's happening on both by iPad and iPhone.  I've talked to Cisco and they couldn't help

    Start by working throudh the Troubleshooting iOS and WiFi knowledge base article and see if that helps the situation.  When you get to shutting down the router, be sure to disconnect power as shutdown on some is really just standby mode.

  • I have a  ipad 64GB Wifi 3G and i can not get onto the internet, i have  set up wifi but it wont get on the net

    i have a  ipad 64GB Wifi 3G and i can not get onto the internet, i dont have a data plan yet & i have  set up wifi but it wont conect to the internet

    From your description above I conclude that the WiFi transmitter and receiver of your iPad appear to be working, but I abviously cannot tell how well they are working.
    Have you reset your iPad already?
    Press the Home and sleep/wake buttons simultaneously until only the white Apple logo appears on the screen - usually 10 to 15 seconds - ignore anything else.
    Genius Bar: http://www.apple.com/retail/geniusbar/

  • Hi! I've got CS3 Design Standard - the actual disks and Software License certificate. It was installed on my laptop which crashed and could therefore not be uninstalled. I have now installed it on my new MacBook Pro, but cannot get it registered with the

    Hi! I've got CS3 Design Standard - the actual disks and Software License certificate. It was installed on my laptop which crashed and could therefore not be uninstalled. I have now installed it on my new MacBook Pro, but cannot get it registered with the serial number. Is it because it wasn't uninstalled on the previous laptop? What to do now?? Thx!

    Maybe this can help someone else...  I simply had to properly uninstall CS3 and reinstall it again after that.  I think that sorted it!  I also remember having a similar issue with Macs at work a couple of years back.  Not sure whether the same applies to CS5/CS6.  Here's a link on how to properly uninstall CS3 on Windows XP, Windows Vista and Mac OS.  I'm on OS X 10.9.2 but it worked just fine.  Remove Creative Suite 3 and CS3 products

  • Firefox will not start. Have error message "Failed (unknown reason)". Now I cannot get to the Internet

    I was browsing and was asked if I wanted to update Firefox. I clicked yes. Thought it loaded, but now I cannot get to the internet at all. Now when I attempt to open Firefox and click on HELP, it gives me a Downloading Firefox 3.6.7 - but it will not connect.
    == This happened ==
    Just once or twice
    == I was attempting to load upgrades to 3.6.7 ==
    == User Agent ==
    Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 5.1; .NET CLR 1.1.4322; .NET CLR 2.0.50727; InfoPath.1; .NET CLR 3.0.4506.2152; .NET CLR 3.5.30729)

    You can find the connection settings in Tools > Options > Advanced : Network : Connection
    If you do not need to use a proxy to connect to internet then select "No Proxy" if the default "Use the system proxy settings" setting doesn't work.
    See "Firefox connection settings":
    * https://support.mozilla.com/kb/Firefox+cannot+load+websites+but+other+programs+can

  • Hi my trackpad is frozen and I also could not get force quit to work, I closed the top down and now I cannot get past the login and the cursor will not move, does anyone have any ideas

    Hi my trackpad is frozen and I also could not get force quit to work, I closed the top down and now I cannot get past the login and the cursor will not move, does anyone have any ideas

    Try these two steps:
    Intel-based Macs: Resetting the System Management Controller (SMC)
    Resetting your Mac's PRAM and NVRAM

Maybe you are looking for