I have a gray globe and its says choose network what should i do
I have a globe showing and it says pick network what should i do
Hold down option key as you startup the computer.
When you see the the available startup disks, select Macintosh HD.
Reset PRAM. http://support.apple.com/kb/PH4405
Best.
Similar Messages
-
i have an iphone 3gs it has been dropped i have connected it charge and its saying reactivation requiered then asks to connect to itunes when i connect it to the laptop it will not connect to itunes but i dont no why can anyone help plz
Sounds like you broke it.
-
product name - iPhone 4s
memory - 64 GB
storage capacity - 56.6 GB
version nos - 8.1.1(12B435)
the WiFi on my iPhone 4s is not working, i have gone to the settings and tried to switch it on but it shows the gray slide and refuse to turn on, what should i do about this.iOS: Wi-Fi settings grayed out or dim - Apple Support
-
To dear apple FaceTime users
I'm having troubles logging on to FaceTime I typed in my correct details and its saying check network connection. I did that and every things fine. Any ideas?Hello...i'm new to forums....was there ever a solution to this problem please?
-
Hi i cant access to my house wifi but to all the others wifiS I can connect. I have restarted my iPhone and my home wifi. What should I do?
What make, model, and version WiFi router do you have?
Is the router firmware up to date?
What type of security is it running? WEP, WPA, WPA2 (WPA2 is recommended, WEP is completely insecure)
Do you have MAC address filtering turned ON? If so, have you added your iPhone MAC address to the permitted list in your router? -
Dont have a rescue email and forgot my security questions , what should i do , need help!
You will need to contact Support in your country to get the questions reset.
Contacting Apple about account security : http://support.apple.com/kb/HT5699
When they've been reset you can then use the steps half-way down this page to add a rescue email address for potential future use : http://support.apple.com/kb/HT5312 -
HI i am downloading a movie in my itunes account and its stuck mid download. what should i do pls?
Take the ATV to a friends house and restore via iTunes on their computer.
Take the ATV to an Apple store and restore via iTunes on a computer there. -
HI i am downloading a movie in my itunes account and its stuck mid download. what should i do pls?
Take the ATV to a friends house and restore via iTunes on their computer.
Take the ATV to an Apple store and restore via iTunes on a computer there. -
I have an iPhone 4 on contract and its not working correctly , what should I do ?
I have an iPhone 4 on contract , I only have this 5 and a half months and the iPhone is not working correctly and i do not have insurance .. What should I do ??
It sounds like you did not purchase it at the Apple store? That doesn't matter - you can still take it to Apple to troubleshoot it.
You can also try to troubleshoot it with the help of the folks here - if you want to do that, let me know and I'll ask that your post be moved to the iPhone forum where you're more likely to get knowledgeable answers, ok. -
help pls
Hi Friend,
In iTunes, you need to pay attention to mark/unmark the fields properly to everything runs well.
Syncing your device with iTunes, open your device. In the Resume Tab, if you have marked "Just sync Music and Videos selected" and/or have unmarked "Manage Music and Videos manually", they mean you need manage which music/videos you want in your device.
Go to Videos Tab, check if the video is there, but probably it is unmarked or something like this. Mark the blanked field and sync with your device again to see what happen.
If sitll not working out, check how iTunes Match works. You maybe need to have an account in iTunes Match to share the video with other devices you have.
Hope it will be helpful -
i bought a second hand iphone 3g last week and it wont let me get my apps cause it says that i need IOS 5. on my itunes it say that the IOs 4.2.1 is current and that no update is needed. i stil tried to download fb but it wont let me cause i dont have the IOS 5. please help me.
The Facebook app now requires iOS 5.0 or later. I believe that 4.2.1 was the last version that Apple released for the 3G. And with the rapid approach of the iPhone 5S and possibly 6 they are no longer supporting the 3G. I would not be surprised to see them stop offering support for the 3GS this time around.
-
after there being an error in trying to update the software it said i have to restore my phone which i have done but says time remaining is about 24 hours . can you please help ? i just want to switch my phone on again .
Hello lyndsey1430,
From what I can gather, it sounds like you're having issues restoring your device. After reviewing your post, I have located an article that can help in this situation. It contains helpful advice concerning recovery mode:
If you can't update or restore your iPhone, iPad, or iPod touch
Use recovery mode
You might need to use recovery mode to restore your device in these cases:
iTunes doesn't recognize your device or says it's in recovery mode.
You see the Apple logo onscreen for several minutes with no progress bar.
You see the Connect to iTunes screen.
Learn what to do if you see the progress bar onscreen for several minutes.
To put your device into recovery mode, follow these steps:
Turn off your device and leave it off.
Plug in your device's USB cable to a computer with iTunes.
Hold down the Home button on your device as you connect the USB cable. Keep holding down the Home button until you see the Connect to iTunes screen.
When you see this screen, release the Home button. If you don't see this screen, try steps 1 through 3 again.
When your device is connected, iTunes will open. You'll see a message saying that iTunes has detected an iPhone, iPad, or iPod touch in recovery mode.
Use iTunes to restore your device. Restoring in recovery mode will erase your device. If you previously synced with iTunes or iCloud, you might be able to restore from your backup.
Get more help
Learn what to do if you don't see your device in iTunes for OS X, or in iTunes for Windows.
If you put your device into recovery mode by mistake, restart it. Or you can wait 15 minutes and your device will exit recovery mode by itself.
Thank you for contributing to Apple Support Communities.
Cheers,
BobbyD -
What do u think that i need to do stay with windows, if its your answer, tell me how to make the wireless work
If your anwers is install mac again tell me how can i install it again i dont have the installation disk
Help Me PlzGo to the Windows Control Panel and select Boot Camp applet. In that applet there is a Boot Drive option. Select Mac OS X.
Or restart the system and hold down the Option key for a few second. A Boot Menu screen will come up. Select Macintosh HD.
Once in OS X go to the Sys Prefences, Startup Disk and select Macintosh HD Mt Lion 10.8.2 and click Restart then Restart again. the system will now restart in Mac OS X.
To boot back to Windows do the same, Startup Disk, and select Windows then Restart and Restart again. -
I have a Macbook Pro 2010 I think and its not powering on what should I do?
I have a Macbook pro 2010 I think. When I plug it in the little light on the charge cable goes green but when I press the power button nothing happen no fans no noises nothing someone please help.
Welcome to the Apple Community.
Unfortunately, it sounds like you can't but you may be able to use a 3rd party solution.
AirPlay Mirroring requires a second-generation Apple TV or later, OS X 10.8 or better and is supported on the following Mac models: iMac (Mid 2011 or newer), Mac mini (Mid 2011 or newer), MacBook Air (Mid 2011 or newer), and MacBook Pro (Early 2011 or newer). You can see which Mac you have and which operating system you are using by selecting 'About this Mac' from the Apple menu in the top left corner of your Mac and selecting the 'More Info' button. -
Question above says it all.
Jleedirector9 did the installation finish? If not what specific error messages did you receive? Also which operating system are you using?
Maybe you are looking for
-
Can i build an application with Labview 2009 for Windows 7?
Hello i use Labview 2009 SP1 and the application builder 2009 SP1. If i install the application on win7 this message is display: Labview Run Time Engine depends on pruduct with upgrade code (...) version 9.0.301, language {} which is not in distribut
-
hi, I'm try to make a new renderer for dataTable tag. the dataTable must have header fixed and rows scrolable. We have a lot of rows in the table so we want to show 10 rows (for examples) and scroll to see the other. But the header must stay visible.
-
Selected Keywords do NOT all get written to selected files. bug
have discovered and confirmed with adobe tech support a bug with adobe bridge cs4 not writing keyword metadata tags to multiple selected files.. PSD files and raw,jpegs when selected with PSDs fail to write metadata keywords to file. If you select a
-
Modifying the Standard Report template
Hi I have a report with 10 columns and 2 of them are wb_id, pa_id. Depending on the search critiria either wb_id or pa_id will be null. I want to highlight the row with some color when I select any row and I am modifying the standard template and col
-
Cannot sign up for .Mac or acces Yahoo! Mail with Firefox unless...
I cannot access my Yahoo! mail account or sign up for .Mac via Firefox 1.5 browser. At the office I have no problem accessing via cable modem. At home via dsl I cannot. Funny thing though, I am able at home via dsl to access these problem sites if I