I have a HP 8150n I keep getting a paper jam 13.20.12 Printer could not automatically eject paper

I have a hp 8150n I get a paper jam 13.20.12 printer could not automatically eject paper- 13.3.12 papr feed 2.paper late jam

This seems to be a commercial product. For the best chance at finding a solution I would suggest posting in the forum for HP Business Support!
You can find the Commercial Laserjet board here:
http://h30499.www3.hp.com/t5/Printers-LaserJet/bd-p/bsc-413
Best of Luck!
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

Similar Messages

I try to download the OS X Mountain Lion, and I keep getting an error saying, "The product distribution file could not be verified. It may be damaged or was not signed." Please Help!

I try to download the OS X Mountain Lion, and I keep getting an error saying, "The product distribution file could not be verified. It may be damaged or was not signed." Please Help!

If you have Intego VirusBarrier X6 installed
1. Open /Applications/VirusBarrier X6.
2. Click on the "Surf" button.
3. Click on the "Ad Banner Filter" tab.
4. Click "OFF" next to "Banner advertisement filter".
5. Start the computer in Safe Boot, then restart the computer into normal mode.
If don't not have Intego Virus Barrier installed
1. Verify that the date and time is correct on the computer.
2. Safe Boot once, then restart normally, then try downloading again.
3. Try with a different user account if the issue persists
If the issue persists
Install Lion onto an empty partition (internal or external).
Note: You can Use Disk Utility to live partition the internal drive and create a second partition large enough to install Lion.
Start from the clean installation of Lion.
Download Mountain Lion from the Mac App Store. Note that the original startup disk can be set as the destination for Mountain Lion during the installation process.

When I click on a song in my iTunes library I keep getting a message telling me that the song could not be located. What is going on?

When I click on a song in iTunes Library I keep getting a prompt that says the selected song could not be located. What is going on?

iTunes can't find your media files, which are normally located in ~/Music/iTunes. Try a Spotlight search on your computer for your media files, and move them back into that location. If you can't find your files, then try going to your backup drive, if you have one.

I cannot play music from my itunes library. I keep getting an itunes message that says, "The song could not be used because the original file could not be found." Is there a fix for this? Thank you.

I cannot play music from my itunes library. I keep getting an itunes message that says, “The song could not be used because the original file could not be found.” Is there a fix for this? Has this happened to anyone else? Is there a fix for this? Thank you.

Hello Turintest2,
I am having a similar problem. I have over 4000 songs giving me this error. I certainily don't want to go in one by one and find them. I know you wrote a script for Windows but I am a Mac user. Is there a fix for me? Here is the info on where the song is currently (used by doing the get info)
Here's a shot of my preferences:
Just FYI, I know that apparently iTunes is looking for this music in the trash. However, if I go here:
Then I find the music there as well. (Which is where it is in my preferences.)
Please help! I don't want to have to go through over 4000 songs and update them one by one.

Keep getting message when trying to sync my ipod (could not synced because the sync session failed to start) how do i resolve this

Keep getting message when trying to sync my ipod (could not synced because the sync session failed to start)

Have you seen this Apple support document?
http://support.apple.com/kb/TS3221
B-rock

Since iTunes update my PC will not see other devices keep getting message The procedure entry point sqlite 3_wal_checkpoint could not be located in the dynamic link library SQLite 3.dll, how do I get my other devices to be found?

Since iTunes updated my PC my other devices are not seen and I keep getting message "The procedure entry point sqlite 3_wal_checkpoint could not be located in the dynamic link library SQLite 3.dll", how do I get my other devices to be found? or do I have to remove all Apple software.

With Windows Explorer, navigate to your C:\Program Files\Common Files\Apple\Apple Application Support folder.
Copy the SQLite3.dll that you should find there, navigate to the nearby Mobile Device Support folder, and Paste it in there also.
Restart the programme all should be well
In case that your OS is (64 bit)
1. Open windows explorer, go to location C:\Program Files (x86)\Common Files\Apple\Apple Application Support
2. Copy file "SQLite3.dll"
3. Now paste it in the folder C:\Program Files (x86)\Common Files\Apple\Mobile Device Support
4. Restart the programme, it should not display that message, it should be clear.
Good Luck

Trying to make a bootable disc but i keep getting this message as a failure notice. "Could not find any scan information. The source image needs to be imagescanned before it can be restored.", what can I do?

Trying to make a bootable disc but i keep getting this message as a failure notice. "Could not find any scan information. The source image needs to be imagescanned before it can be restored.", what can I do? Any help at all would be appreciated.

Have you tried scanning the source image? Disk Utility > Images menu > Scan Image for Restore…

Ipod sync problems ipod 2.2.1 touch OS10.6.8 itunes 10.6.1 The photos sync but the calendars and contents will not. I keep getting this error message... «iTunes could not sync information to the iPod «name of iPod» because a sync session could not be sta

ipod sync problems
ipod 2.2.1 touch OS10.6.8 itunes 10.6.1
The photos sync but the calendars and contents will not. I keep getting this error message...
«iTunes could not sync information to the iPod «name of iPod» because a sync session could not be started.»

Greetings,
See this post: https://discussions.apple.com/message/12799057#12799057
Cheers.

I'm trying to set up my new iPhone 5s from a backup of my previous iPhone, when trying to enter my Facebook login info in settings I keep getting the following error message : error signing in could not communicate with server, please help !

I'm trying to set up my new iPhone 5s from a backup of my previous iPhone, when trying to enter my Facebook login info in settings I keep getting the following error message : error signing in could not communicate with server, please help !

Can you access other apps? Can you acess the internet? Can you access applications that use internet besides facebook?
If answer is yes to all of these; contact Facebook.

I cannot play music from my library on either my external drive or my laptop - keep getting same message "___ song (all of them) could not be used because the original file could not be found. I have tried changing the path in prefernces many times.

I cannot play music from my libray on either my external drive or my laptop. I keep getting the same message - "___ song (all of them) could not be used because the original file could not be found. Would you like to locate it?" I have changed the path several times under preferences and it still won't recognize any songs from either my laptop hard drive or my external drive. I can't play any music at all.

I think I've fixed this on my machine. If you look in the ITunes folder there is a subfolder called Previous iTunes Libraries. In my case for some reason this contained the one which had always worked and a new one was in the main folder. I closed iTunes, deleted the new one, and moved the old one back to the main folder, then opened iTunes. It then rebuilt the library and it plays correctly. Hope it works for you.

What does it mean when I keep getting the following message: Cannot open Page: Safari could not open the page because the server stopped responding" I have it connected to my wifi, have 3 strong bars,but the circle just keeps going around.

What does it mean when I keep getting the following message on my IPad2:

Usually it's because you are not making internet connection via wifi.
Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Change the channel on your wireless router. Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
 Cheers, Tom

I keep getting the message, "the file is damaged and could not be repaired"

I have a newer Gateway PC equipped with Windows Vista Ultimate, and recently downloaded the free Adobe Reader 8.1.1 version to it.
I'm not very computer literate, so I'm not sure which terminology to use all the time...sorry.
When I attempt to open (view, read, download?) a pdf file, it starts the download process, showing the progress at the bottom of the page....for example, it might say, "downloading (16.2kb out of 543.5kb)"
Usually, about a minute or so into the download, the word "downloading" changes to "downloaded", the action stops, and shortly after (on the window with the gray Adobe Reader background), a smaller message window pops up, declaring, "the file is damaged and could not be repaired".
A friend suggested that there was probably a problem with the original downloading of Reader and recommended that I completely remove it from my system, then re-install it. Reluctantly, with a very slow dial-up connection network, I did as he suggested, then painfully sat through about a two-hour download AGAIN of Reader 8.1.1
After the download was completed again, I successfully opened a few of the pdf files which I was previously having the problems with. Problem solved??? NOT QUITE!!! After about three or four successful file downloads (openings/readings of the files), it again started to do the same thing, where it would not complete the downloading/opening process and again leaving the message, "the file is damaged and could not be repaired."
I am very confident that the files are not the problem, as many of my friends have viewed/opened those same pdf files repeatedly with no issues, BUT WHAT IS CAUSING THIS??? As I said before, I'm not very computer savvy as it is, and adding the newer Windows Vista Ultimate OS probably hasn't helped any.
1. Is the problem with Windows Vista?
2. Is the problem with Adobe Reader 8.1.1 (or the downloading of it)?
3. Is the problem related to the security settings of my computer?
4. Is the problem likely virus related (I use the purchased McAfee protection)?
I just don't know where or how to start looking for the solution, other than thru this forum, and I simply can't afford the time to remove and re-install Adobe Reader 8.1.1 each time I need the use of my computer.
Any assistance would be greatly appreciated, and you can e-mail me with suggestions to [email protected], or else call me on my cell
THANK YOU,
Don Maycumber
Republic, WA
509-570-8114 Verizon mobile

I'm having the same problem but with high speed access.
Anyone know the answer?
~Chris

Trying to update keep getting a message "the ipod software update server could not be contacted Network connection could not be established" using mac OSX. done this with 2 ipod touches??

trying to update 2 ipods but when I go through the process it says "The ipod software update server could not be contacted" "Network connection could not be established". One of the ipods is locked and I don't remember password.

Here's what you can do in case of the forgotten password:
Connect in recovery mode and restore, you'll get the option to rest the passcode during this process:
iOS: Unable to update or restore and iPhone and iPod touch: Wrong passcode results in red disabled screen
If you cannot remember the passcode, you will need to restore your device using the computer with which you last synced it. This allows you to reset your passcode and resync the data from the device (or restore from a backup). If you restore on a different computer that was never synced with the device, you will be able to unlock the device for use and remove the passcode, but your data will not be present. Refer to Updating and restoring iPhone, iPad and iPod touch software.
Check this post for the network problem:
https://discussions.apple.com/message/17855328?ac_cid=142432#17855328

Keep getting error message: the procedure entry point RtlCaptureContext could not be located in the dynamic link library KERNEL32.dll

The message above keeps popping up on the desktop. Sometimes I have 5 or 6 of those boxes on the screen. It happens all the time and it is when I am not on the web.

Looks that RtlCaptureContext is not supported on the Windows 2000 platform, so you may have installed software that requires Windows XP as a minimum.
See:
* [[Troubleshooting extensions and themes]]
* [[Troubleshooting plugins]]

I keep getting error: "Some items for the following product could not be installed successfully" when trying to install the CS6 product.

-------------------------------------- Summary --------------------------------------
- 0 fatal error(s), 18 error(s), 6 warning(s)
----------- Payload: {0C4E7429-E920-4125-980E-029A87AE0A4D} AdobeColorCommonSetCMYK CS6 4.0.0.0 -----------
WARNING: DS012: LocalizeFile: Localized string not found for locale 'en_GB' try fetching for en_US(Seq 21)
WARNING: DS012: LocalizeFile: Localized string not found for locale 'en_GB' try fetching for en_US(Seq 22)
----------- Payload: {C7B1C1B3-368D-4C32-A818-83F1554EB398} AdobeColorCommonSetRGB CS6 4.0.0.0 -----------
WARNING: DS012: LocalizeFile: Localized string not found for locale 'en_GB' try fetching for en_US(Seq 11)
WARNING: DS012: LocalizeFile: Localized string not found for locale 'en_GB' try fetching for en_US(Seq 12)
----------- Payload: {48623899-C152-457D-9B30-1F957332AC2F} AdobeColorPhotoshop CS6 4.0.0.0 -----------
WARNING: DS012: LocalizeFile: Localized string not found for locale 'en_GB' try fetching for en_US(Seq 3)
----------- Payload: {78E38D75-4D92-4F6E-B631-17A436BED680} AdobeColorVideoProfilesCS CS6 4.0.0.0 -----------
WARNING: DS012: LocalizeFile: Localized string not found for locale 'en_GB' try fetching for en_US(Seq 5)
----------- Payload: {8ACD4814-788B-11E1-AC70-A860A781E0D9} Adobe Dreamweaver CS6 12.0.0.0 -----------
ERROR: DF015: Unable to delete symlink "/Applications/Adobe Dreamweaver CS6/Adobe Dreamweaver CS6.app/Contents/Frameworks/amtlib.framework/Resources"(Seq 418)
ERROR: DW063: Command ARKDeleteSymlinkCommand failed.(Seq 418)
----------- Payload: {AAF0D225-F129-40F2-916E-12E28DBD19ED} Adobe Illustrator CS6 Core 16.0.0.0 -----------
ERROR: DF015: Unable to delete symlink "/Applications/Adobe Illustrator CS6/Adobe Illustrator.app/Contents/Frameworks/amtlib.framework/Resources"(Seq 2135)
ERROR: DW063: Command ARKDeleteSymlinkCommand failed.(Seq 2135)
----------- Payload: {9124DF4E-617D-486B-A970-8FA632244F24} Adobe Photoshop CS6 Core 13.0.0.0 -----------
ERROR: DF015: Unable to delete symlink "/Applications/Adobe Photoshop CS6/Adobe Photoshop CS6.app/Contents/Frameworks/amtlib.framework/Resources"(Seq 524)
ERROR: DW063: Command ARKDeleteSymlinkCommand failed.(Seq 524)
----------- Payload: {327492D4-78EB-11E1-8ABE-84C55623D190} Adobe InDesign CS6 Application Base Files 8.0.0.0 -----------
ERROR: DF015: Unable to delete symlink "/Applications/Adobe InDesign CS6/Adobe InDesign CS6.app/Contents/Frameworks/amtlib.framework/Resources"(Seq 1051)
ERROR: DW063: Command ARKDeleteSymlinkCommand failed.(Seq 1051)
ERROR: DW050: The following payload errors were found during install:
ERROR: DW050: - Adobe InDesign CS6 Common Language Files_AdobeInDesign8CommonLang-en_GB: Install failed
ERROR: DW050: - Adobe Illustrator CS6 Core_AdobeIllustrator16en_GBLanguagePack: Install failed
ERROR: DW050: - Adobe InDesign CS6 Application Base Files: Failed due to Language Pack installation failure
ERROR: DW050: - Adobe InDesign CS6 Common Language Files_AdobeInDesign8CommonLang-en_US: Install failed
ERROR: DW050: - Adobe Dreamweaver CS6_AdobeDreamweaver12en_USLanguagePack: Install failed
ERROR: DW050: - Adobe Dreamweaver CS6: Failed due to Language Pack installation failure
ERROR: DW050: - Adobe Photoshop CS6 Core: Failed due to Language Pack installation failure
ERROR: DW050: - Adobe Illustrator CS6 Core: Failed due to Language Pack installation failure
ERROR: DW050: - Adobe InDesign CS6 Application Language Files_AdobeInDesign8AppLang-en_GB: Install failed
ERROR: DW050: - Adobe Photoshop CS6 International English Language Pack_AdobePhotoshop13-en_GB: Install failed

Bespokeclo according to ERROR: DF015: Unable to delete symlink "/Applications/Adobe Dreamweaver CS6/Adobe Dreamweaver CS6.app/ it would appear you already have an existing installation of Dreamweaver CS6 installed. Please make sure to use the uninstaller located in the Applications/Utilities/Adobe Installers folder prior to reinstalling. If you continue to face difficulties then utilize the CC Cleaner Tool to ensure full removal. You can find details of the use of the CC Cleaner tool at Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6 - http://helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems.html.

I have a HP 8150n I keep getting a paper jam 13.20.12 Printer could not automatically eject paper

Similar Messages

Maybe you are looking for