I HAVE A HP PHOTOSMART C4700 AND I CANNOT CONNECT IT WITH MY IPAD 2 TO PRINT

I have Photosmart C4700 and want to print from IPad Air 2. Is my printer airprint? If not, is there a way to print from the Ipad or will I need to get a new printer? If I need a new printer...do you have a list of suggested printers that would be similar to the one I have that IS airprint. This printer is used in a cabin seasonally and the cost of replacing cartridges is a factor as we never use one up, but it dries out as the printer is off 8 mos of the year in cold climate. Thanks.

Hi,
Your printer is not airprint enabled but you should be able to use the HP ePrint app on it.
The most straight forwad way to print wirelessly using the eprint app is to make sure that both the ipad and the printer are connected to the same wifi network.
Once this is complete, download the HP eprint app and print from within the app. Once everything is connected to the same network, you'll see your printer from within the app and be able to print to it.
"Although I work for HP, I'm speaking for myself and not on behalf of HP"
"Say "Thanks" by clicking the Kudos Star in the post that helped you.
--Please mark the post that solves your problem as "Accepted Solution"

Similar Messages

  • HT3529 I have a message domain error1032 and I cannot receive messages on my iPad any ideas?

    I have just had a box come up in the middle of screen for yahoo password it does not recognise my password and therefore I can't receive emails any a
    Ideas.

    It's not that you can't use the subject field, but it is very unreliable when I try to use it. Sometimes the message send button will work and sometimes it won't.
    But the biggest reason to turn it off is so that you do not accidentally type your message in the subject field. You can type a subject in that field, but you still have to type the actual message in the space below the subject field.

  • I have a hp photosmart B110 and a macbook air how do i print double sided? i have gone into system preferences but there is no option to change the printer preferences to double sided and i have printed double sided before with my old dell laptop

    I have a HP photosmart B110 and Macbook Air I need to print double sided but there doesn't seem to be any options on the system preferences to change to double sided, I was able to print double sided with my old laptop which was Dell and allowed me the option under printer preferences but there is no option for that either i use pages for my documents and download documents through my university andy help appreciated

    My HP Officejet Pro 8600 plus has dual sided printing
    HP 5550dn Lost double sided printing with Mavericks driver

  • I have a HP Photosmart CN733A, and it recently stopped printing. Help?

    Like I said, I have a HP Photosmart CN733A, and it recently stopped printing. I've always printed from this computer here at college with this same printer, and one day, it stopped. It's not a problem with the printer cartridge, I've checked. When I go to print something, the printer appears to be in working order, but nothing ever prints. What can I do?

    Hi sydnoid_615 
    Sorry to hear that you are having this issue and I hope you are otherwise doing well;
    What Operating System?
    If windows Xp or later try this  HP Hardware Diagnostic Utility
    Veriify the printer firware and software up to date  Go Here select your OS and verify 
    How your printer is connected to your computer USB, Wireless, Ethernet ,ETC)
    if networked check the firware of the printer is the latest as well
    Hope it hepls;
    RobertoR
    You can say THANKS by clicking the KUDOS STAR. If my suggestion resolves your issue Mark as a "SOLUTION" this way others can benefit Thanks in Advance!

  • I have an HP Photosmart Premium C410. It worked great with Mountain Lion, but it doesn't with Mavericks. Can't install any printing s/w even though it's on the network. Anyone know why????

    i have an HP Photosmart Premium C410. It worked great with Mountain Lion, but it doesn't with Mavericks. Can't install any printing s/w even though it's on the network. Anyone know why????

    So, this post, as well written as it is, went totally ignored by the HP personnel that are supposedto be "helping" us poor novices? WOW! No wonder this crap gets thrown out of the house so often.
    I have two HP network printers. An HP Officejet 4500 G510g-m, and a HP Photosmart Premium C410a, and they are the most unreliable pieces of "equipment" that I have in my network. This is absolutely trhe crappiest bunch of junk on the market. The only thing worse than these "devices" is the support from HP for them.
    I also have a HP Photosmart C5280 AIO, and a Deskjet D2345 Printer. I have little, to no, problems with these two. The "flagships" of my network imaging are the worst, of the worst.

  • I just got this HP Photosmart Plus and I am very frustrated with it as it is not printing well.

    I just got this new HP Photosmart Plus and I cannot get to print out a photo from my computer. My computer is also HP. When it prints a photo it is pale and in black and white. Why?

    Hi, within the driver, what options are you choosing for your print? Ensure you are choosing full colour and not grayscale.
    Have the supplies/printhead been exposed to the air for an extended period since removing the packaging? You might want to open up your HP Printing software and utilise the toolbox to carryout some printhead cleaning and get some diagnostic prints - not only will this help if it is a print quality issue but it will also save wasting valuable photo media.
    I am an HP employee.
    Feel free to provide Kudos if I have helped you!

  • I have updated to snow leopard and I cannot get iPhoto to work or find anywhere to download the appropriate  version.  I have 8.1.2 but it will not open

    I have updated to snow leopard and I cannot get iPhoto to work or find anywhere to download the appropriate  version.  I have 8.1.2 but it will not open.  What do I need to do?

    Back up your iPhoto library, Depress and hold the option (alt) and command keys and launch iPhoto - rebuild your iPhoto library database
    LN

  • We have two iPads. mine is the first one purchased. I opened iTunes to put some photos from the Mac to my wife's iPad. I plugged in my wife's iPad.  Both ipads have the same apple id and password. iTunes synced everything from my iPad to my wife's iPad. N

    We have two iPads. mine is the first one purchased. I opened iTunes to put some photos from the Mac to my wife's iPad. I plugged in my wife's iPad.  Both ipads have the same apple id and password. iTunes synced everything from my iPad to my wife's iPad. Now we have two identical iPads looking like mine. Everything on her ipad seems gone and replaced with mine, all her recent holiday photos, emails, settings, etc etc seem gone. 
    I'm toast!
    Help!!
    LJ

    How to use multiple iPods, iPads, or iPhones with one computer
    http://support.apple.com/kb/HT1495
    How to Share a Family iPad
    http://www.macworld.com/article/1163347/how_to_share_a_family_ipad.html
    Using iPhone, iPad, or iPod with multiple computers
    http://support.apple.com/kb/ht1202
    iOS & iCloud Tips: Sharing an Apple ID With Your Family
    http://www.macstories.net/stories/ios-5-icloud-tips-sharing-an-apple-id-with-you r-family/
    How To Best Use and Share Apple IDs across iPhones, iPads and iPods
    http://www.nerdsonsite.com/blog/2012/06/07/help-im-appleid-confused/
     Cheers, Tom

  • How do I get rid of the iCloud Backup alert message?  I cannot do anything with my iPad and cannot get rid of the alert. I have plugged in the iPad with Wifi on, but it won't reset.  Thanks

    How do I get rid of the iCloud Backup alert message?  I cannot do anything with my iPad and cannot get rid of the alert. I have plugged in the iPad with Wifi on, but it won't reset.  Thanks

    Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

  • I have a new iPod touch and when I connect it to my pc and itunes, a window says "this ipod cannot be used because the Apple Mobile Device Service is not started."

    I have a new iPod touch and when I connect it to my pc and itunes, a window says "this ipod cannot be used because the Apple Mobile Device Service is not started."

    This might help restart it http://support.apple.com/kb/TS1567

  • I used my ipad to transfer music to my wife's pc, now I have reconnected to my mac and itunes is not recognsing it - the ipad is not showing in the sidebar

    I used my ipad to transfer music to my wife's pc, now I have reconnected to my mac and itunes is not recognsing it - the ipad is not showing in the sidebar and syncing not happening. I have tried resetting ipad and restarting etc but still no joy. Anyone had a similar experience?

    Take it to the Apple Store for evaluation.
    Try this.
    Restart the iPad by holding down on the Sleep button until the red slider appears and then slide to shut Off. To power up hold the Sleep button until the Apple logo appears and let go of the button.
    Reset the iPad by holding down on the Sleep and Home buttons at the same time (for about 10-15 seconds) until the Apple logo appears (ignore the red slider), then let go of the buttons.
     Cheers, Tom

  • I have Adobe Photoshop Elements 10 and I wish to upgrade with Adobe Creative Suite 3 but the option is not coming up on the drop down menu

    I have Adobe Photoshop Elements 10 and I wish to upgrade with Adobe Creative Suite 3 but the option is not coming up on the drop down menu

    The first two issues sound like a video driver problem.
    What is the make/model of your video card/chip?
    What is the installed video driver number and date?
    For the last issue, it could be many things, including the video driver. I'd look over this ARTICLE, and if there is nothing in the first part, then move on to tuning up the OS an computer in the second part. That would probably be a good time to post the full specs. of your computer, and also both your Project and Source footage. Finally, part three covers many troubleshooting tips, and furnishes many links.
    Good luck,
    Hunt

  • I have recently upgraded to mavericks and I cannot get my scanner to work.  I tried deleting the printer and reinstalled it but no luck

    I have recently upgraded to mavericks and I cannot get my scanner to work.  I tried deleting the printer and reinstalled it but no luck

    Canon does not support the MP530 on Mavericks, they have not produced drivers and apparently do not intend to,

  • I have a new ipad mini and I want to sync with my ipad, but I don't want to sync photos or music as it takes up all my memory.

    I have a new ipad mini and I want to sync with my ipad, but I don't want to sync photos or music as it takes up all my memory. How can I do this?

    I'm not understanding what you're wanting. You don't sync ipad to iPad. You can sync both devices to the same iTunes account or same computer.
    And you can choose the content on each device. I have an iPod and iPad and maintain separate content on each one.

  • We have just installed  Lion  and now cannot connect to MyExpat

    we have just installed OS X Lion, v10.7.2  and now cannot connect to MyExpatNetwork on my Macbook pro. Any suggestions?

    yeah-find out where you're downloading stuff to, and stick with it. I'm using FireFox and tell it to save the driver and stuff on the desktop, and when I quit FireFox, there it is on the desktop. you'll also need your admin password. It should show up as a .dmg file, then double-click on it to open it. You should see "Brother.pkg" . start up brother.pkg (double click??) and folow the instructions that ought to appear to install the printer driver.  If the .dmg file doesn't mount, use Disk Utility** to mount it and get it working. Then you should see the package.  and then you can install it.
    ** you may have to click on the .dmg file and choose "Get Info" then Open with, then choose disk utility, and then open with then change all. then close it. Hopefully that ought to work. If you cannot remember your admin password, I can't help you right now. Looks like you'd need it, to let Brother install that printer driver.
    well, enough for tonight
    if this didn't help you, then ask me again tomorrow
    John b

Maybe you are looking for

  • Failed to execute with the error Error occurred when starting the parser: t

    Dear All I am getting this error ""A database error occurred. The database error text is: The MDX query SELECT  { [DASKA1EDEL2DMLXTQ62S595QV].[DB7BP4A8AMQTUD3DPEEPS4J87] }  ON COLUMNS , NON EMPTY CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN(

  • E-recruitment problem --- URGENT

    Hi Gurus, I have an issue with one of my client who have implemented E-recrutment portal. The client wants to change the factory calender to drop down list box in HRRCF_PROFILE BSP application. I have copied to ZZHHRCF_PROFILE, but now I'm not able t

  • How to get domain under wi-fi choices

    Brought my new Razr to work and I can't log into companies Wi-Fi because there is no choice for domain name.  Any idea's?

  • Student with MX7 questions

    I am a student web designer that is working on my high school's website. I have many ideas that I want to implement on said site, but I don't know exactly how. 1.) When you scroll over the links, I want the picture in the center to swap. It should al

  • Validate a value against table validation value set within PL/SQL

    Hi, I am trying to import price list lines along with Pricing attribute values. I have to validate the uploaded values against the pricing attribute value set, before I import them into base tables. Value set defined is of type table validation. I wa