I have a hp photosmart c4795 all in one printer and i need the driver and software for vista os.

install is for a gateway laptop NV5214U. I did asearch on hp website but it responded the it could not find any drivers for the hp photosmart C4795 series all-in one printer.HELP

Ok from here: http://support.hp.com/us-en/product/HP-Photosmart-​C4700-All-in-One-Printer-series/3794613/model/3940​...
First, select your operating system Microsoft Windows Vista (64-bit).
Click Submit.
Click the blue Download button.
Click Next, then follow the prompts for the HP Download and Install Assistant.
Let me know if you need any more help or if this solves your problem!
Thanks,
-hjs_19 *I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution. Click the “Kudos Thumbs Up" on the bottom right of this post to say "Thanks" for helping!

Similar Messages

  • I have a HP Photosmart C7280 All-in-One Printer and want to print from my ipad

    I have a HP Photosmart C7280 All-in-One Printer and want to print from my ipad's and my iphones at home...  My printer is set up to print wirlessly on my Network.  I need to know is there a firm wear update i can get or a good app to install so i can print?? 

    hi there, 
    This article should have everything you need to get started . Check it out and let us know if it helps.
    Best of Luck! 
    You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

  • I have an HP Photosmart C4180 all in one printer scanner and copier, I can't figure out how to scan more than one page at a time and then send as a PDF file via email

    I have an HP Photosmart C4180 all-in-one, printer, scanner and copier.  I can't figure out how to scan more than one page?  It will only let me do one page at a time and then I have difficulty sending pages 1, 2 and 3 as one docuement.  Any ideas??
    Thank you, Jetteski

    Hello Jetteski,
    Hello Jetteski, Thanks for the post.
    Since you are running a MAC, check the below links for some excellent information on scanning.  Good Luck!
    http://goo.gl/M8Cl2
    http://goo.gl/cufK6
    http://goo.gl/OTQoR
    I work for HP but my posts and replies are my own....Thank you!

  • Since I installed Mountain Lion operating system, I cannot print.  I have a HP Photosmart C7280 All-in-one printer.  I get a message when I try to update the software "Server not available  The software update service is currently not available."

    After installing Mountain Lion, my printer doesn't work.  I know it is connected as it shows up,  The message is:
    "The printer software was installed incorrectly.  Please reinstall the software for this printer or conact the anufacturer for assistance."
    I used the disk that came with the printer as when I go to the HP site, it tells me that Apple has the drivers needed.  I unistalled the printer and reistalled.  Previously, I just went to the HP website an everything worked fine for drivers, program, etc.  I never had to use the CD that came with the printer.  My printer is:  HP Photosmart C7280 All-in-one, it is wireless, but I even took the computer and plugged it into the printer to make sure that everything was connected.  Can someone please help me to get this working,
    Thank you,
    Cheryl Paul

    Here:
    http://support.apple.com/kb/DL907?viewlocale=en_US&locale=en_US

  • I have a C309g Photosmart Premium All-in-One printer that the paper transport mechanism rumbles

    My computer operating system is Windows XP
    An error message "Remove Paper Jam" occurs when I am trying to print even when there is no paper in the printer. It also rumbles as it scans a document to the computer but it takes almost 3 times longer than normal to scan. I have checked the printer and duplexer for a paper and they are clean.
    Nothing was changed to the computer, printer or operating system.
    It sounds to me like the gear bearings need lubricating.

    Hi,
    HP has an HP Hardware Diagnostic Utility that might help resolve the issue you are having.  Here is the link to download the utility.
    HP Hardware Diagnostic Utility
    Say Thanks by clicking the Kudos Star in the post that helped you. Please mark the post that solves your problem as Accepted Solution.
    I am employed by HP

  • Purchased an HP Photosmart 5520 all in one printer last year and a Macbook Pro in Jan. They worked together up to June. In Sept. when I tried to print wirelessly, it would not print. The laptop had been updated. Tried to update the printer via HP,couldn't

    I have an HP Photosmart 5520 all in one printer and a MacBook Pro. Bought the MacBook Pro in Jan 2013 and the printer in Dec 2012. I was able to print to the wireless printer up until June 2013. In September, when I tried to use them together, I could not print. During the period between June and Sept., my laptop software was updated. I have tried to update the HP software on my laptop, but could not. What can I do to use this printer with my MacBook Pro? Please help!

    The MacBook Pro is running at least 10.7.

  • "ink system failure" error with code oxc19e0023 on a HP Photosmart Premium All-in-One Printer - C309

    "ink system failure" error with code oxc19e0023 on have a HP Photosmart Premium All-in-One Printer - C309g  - Have done all the resets and reseated the ink also tried replacing ink with new HP carts..getting frustrated please help
    This question was solved.
    View Solution.

    Have you tried the steps outlined in this article:
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03081973&cc=us&dlc=en&lc=en
    If not give the steps a try and let us know if it helps.
    Best of Luck!
    You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

  • HP Photosmart C7280 All In One printer not campatible with windows 8.1

    I have an old Photosmart c7280 all in one printer.  I bought a new computer that has windows 8.1.  HP doesn't
    have software or drivers that can make this printer compatible with my new computer.  What can I do besides buy a new prfnter?

    Hi,
    Please download the following Software and Derivers and install on your new Windows 8.1 machine:
        http://ftp.hp.com/pub/softlib/software12/COL30662/mp-110038-1/PS_AIO_02_Net_Full_Win_WW_140_408.exe
      Regards,
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • I have an HP Photosmart C7250 All-in-one - Test Report - The wireless radio is not functioning

    I have an HP Photosmart C7250 All-in-one and the wireless feature does not work.  When I try to go through the Wireless Setup WIzard, the Test Report indicates the following - "The wireless radio is not functioning.  Contact HP Support".  Can you help me?

    Let's reset the printer.  Turn it off, hold the # and 6 keys while turning it back on.  Go to Setup > Network > Wireless Network Test afterward to see if it worked.
    Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
    I am employed by HP

  • I have an hp photosmart c7250 all-in-one the wireless radio is not functioning

    I have an HP Photosmart C7250 All-in-one and the wireless feature does not work.  When I try to go through the Wireless Setup WIzard, the Test Report indicates the following - "The wireless radio is not functioning.  Contact HP Support".  Can you help me?
    This question was solved.
    View Solution.

    Let's reset the printer.  Turn it off, hold the # and 6 keys while turning it back on.  Go to Setup > Network > Wireless Network Test afterward to see if it worked.
    Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
    I am employed by HP

  • I have a hp photosmart c7280 all in one and i get a message that says "pump motor stalled.

    I have an HP photosmart C7280 All in One and I get a message that says pump motor stalled.  I have done everything from resetting and turning it off.  I have checked to make sure that there is not any paper jam.  It makes a clicking sound after it has been reset and then the message "pump motor stalled" pops up.  Any suggestions or should I just toss and buy new???  It is only three years old but it is out of warranty.

    You might try the suggestions in this post.  There is also a post here that reports success.
    Bob Headrick,  HP Expert
    I am not an employee of HP, I am a volunteer posting here on my own time.
    If your problem is solved please click the "Accept as Solution" button ------------V
    If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

  • I have aHP Photosmart C8180 All-in-One Printer that won't stay on

    I  have aHP Photosmart C8180 All-in-One Printer that when I turn it on it looks like it is going to start, then the light on the light scribe door goes on and off, it makes a clicking noise then the printer shuts off, then comes back on and does the same thing over and over.

    Hello Gr8fulbuck, I see you are having an issue with your printer and I would like to help.
    I just need some information from you first. Do you have your printer plugged directly into a wall outlet? Have you power reset your printer? Have you tried to plug it in to a different wall outlet? Have you tried using a different power cable?
    Which model of printer do you have?
    http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&dlc=en&docname=c01887241
    Power reset - http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&dlc=en&docname=c03177455
    Please respond with this information, I would be happy to help you.
    R a i n b o w 7000I work on behalf of HP
    Click the “Kudos Thumbs Up" at the bottom of this post to say
    “Thanks” for helping!
    Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

  • Problem with installing Solution Center for a HP Photosmart Premium All-in-One Printer - C309g

    Hi folks,
    I've searched many threads and found some directions to remedy this, tried them and have had no luck.
    I'm running Windows 7.  All updates are current.  When I bought the printer I installed the software (on Windows 7 OS) from the disc and everything was fine.  Fast forward a year and Solution Center stopped working.
    Uninstalled all HP software to reinstall.  I was only able to reinstall HP Update.  I was able to load the basic drivers for print and scan, but not the entire software suite including Solution Center.  The installation stops abruptly after "installing updates".
    I even downloaded and tried "PS_AIO_06_C309g-m_USW_Full_Win_enu_140_175" and got the same result as the original installation disc.
    What can I do with my printer (HP Photosmart Premium All-in-One Printer - C309g)???
    Thanks,
    Alex
    This question was solved.
    View Solution.

    Hi jerseyal,
    I hate to hear you are having issues.  What suggestions have you tried?  Did you get an error when installing?  How are you connecting the device?  Before completing the below steps run the print and scan doctor to see what it indicates and if the issue is resolvable through that tool(click + beside utility diagnostic tools, then download beside print and scan doctor). Click Here
    If you are still experiencing the issue the steps below may help resolve it. 
    Try using the scrubber built into the software, then reinstalling from the current download available on the website. 
    From original printer installation CD:
    1. Insert CD into drive, and then cancel the installer
    2. Open My Computer, and then right click on the CD drive and chose open
    3. Open folder Util
    4. Open folder CCC
    5. Run the uninstall_ L4.bat for non-HP computers only.    For HP computers run the Uninstall_L3.bat NOTE: Performing level 4 uninstall on HP computer will negatively affect operating system functionality-HP and I are not responsible for damages or loss of data caused
    6. When the uninstall has completed restart the computer
    7. Run Disk cleanup from Accessories\ System Tools
    8. Download and install the latest version of Adobe flash player
    http://www.adobe.com/support/flashplayer/downloads.html
    9. Use the following tool to clean the registry.  Note: This utility is not HP sponsored or approved.  HP and I are not responsible for damages or loss of data caused by the utility.  This step is optional.   You can skip it if you want.
    http://download.cnet.com/Advanced-SystemCare/3000-2086_4-10407614.html?part=dl-6271865&subj=dl&tag=b...
    10. Download the full feature software and drivers Driver Link
    11. Run the download to reinstall the printer
    From a download:
    1. Run disk cleanup on your computer
    2. Download and run the software and drivers below.
    3. Once the download is done extracting, cancel the download. Driver Link
    4.. Press the Windows key + R on the keyboard to bring up the run menu.
    5. Type %temp% in the run field and click OK.
    6. Look for, and open the folder starting with 7z (Example: 7zS2356)
    7. Open folder Util
    8. Open folder CCC
    9. Run the uninstall_ L4.bat for non-HP computers only.    For HP computers run the Uninstall_L3.bat NOTE: Performing level 4 uninstall on HP computer will negatively affect operating system functionality-HP and I are not responsible for damages or loss of data caused.
    10. When the uninstall has completed restart the computer
    11. Run Disk cleanup from Accessories\ System Tools
    12. Download and install the latest version of Adobe flash player
    http://www.adobe.com/support/flashplayer/downloads.html
    13. Use the following tool to clean the system and registry.  Note: This utility is not HP sponsored or approved.  HP and I are not responsible for damages or loss of data caused by the utility.  This step is optional.   You can skip it if you want.
    http://download.cnet.com/Advanced-SystemCare/3000-2086_4-10407614.html?part=dl-6271865&subj=dl&tag=b...
    14. Download the full feature software and drivers Driver link
    15. Run the download to reinstall the printer
    Note: Depending on type of security software it may need to be disabled when re-installing unit. Also make sure the Adobe flash player is up to date.
    Hope this helps!
    Also, remember a click on the Kudos star to the left is a quick "Thanks" for a helpful post.
    Please select the "Accept as Solution" button on the post that best answers your question.
    I appreciate your input !
    Thank You,
    I work for HP.

  • Looking for Print Server for HP Photosmart C4483 All-in-One Printer

    I am looking for Print Servers that I can use with 'HP Photosmart C4483 All-in-One Printer' for both 'Printing and Scanning'. I'm not sure if this Printer is Network Ready or Network Capable, kindly advice.

    Hello Merole
    As I understand it you can print color everywhere but from MS Word 2013? If this is the case try the steps I have outlined below to see if they resolve your issue:
    On the View tab, in the Color/Grayscale group, click Black and White.
    On the Black and White tab, in the Change Selected Object group, click the settings that you want.
    I hope this helps resolve your printing issue. Thank you for posting on the HP Forums. Have a great day!
    Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
    Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
    Dunidar
    I work on behalf of HP
    Find out a bit more about me by checking out my profile!
    "Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

  • Infor regarding HP Photosmart Premium All-in-One Printer - C309g

    HI i have a question.
    I intend to buy HP Photosmart Premium All-in-One Printer - C309g for my home use.
    I want to know whether i need a wireless connection forthis printer or i can use with without a wireless connection.
    I have a PC with DSL but with no wireless connection.
    Umer

    The C309g has an Ethernet port so you can wire it to your DSL router/modem (if there are ports open in the back).
    Read more here.
    Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
    I am employed by HP

Maybe you are looking for

  • How to determine the system color and set them for my app?

    Hi, I'd like to set the colors of my application to the system's colors. Especially the backgrounds of my JPanels, JButtons and so on should look like in the operating system. If you change the systems color scheme, my application looks really wierd

  • How to setup the complex ownership relationship in SAP BPC

    Hi Buddies, I am new to SAP BPC. For legal consolidation, I am confused how to setup the ownership in BPC. The senario is following:     P is the parent company, S1 and S2 are subsidiaries.     1) P owned S1 80%, ownded S2 90%, meanwhile S1 owned P 2

  • Nano doesn't display artworks

    Hi, u lot, i'm new in here and I have recently purchased a iPod Nano, and have tested it. Now, I'm trouble shooting with a problem, when in the iTunes I put to use a artwork, it appears, then I activate as told to do so in the User's manual, and I tr

  • Forwarding rejected mail to internal recipient?

    I would like to forward all mail that is normally rejected by the mail gateway to a "junk" mail folder on the internal mail server. How would I acchieve this? Is this done by using a wildcard in the transport map or is there another method preferrabl

  • ITunes Library wiped out after software update - Pls help !

    I set my iMac periodically runs auto software update, and after I run iTunes 6.0.5 (20) software update, I opened iTunes and a warning message says, "Files moved to iTunes Library Damaged 1", and the library is empty !! On further search, when I go i