I have a hp photosmart D110 printer and I can't get it to print. It will not connect to my wireless
please help me get my printer to print and connectto my wireless
Wnat router?
What operating system?
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP
Similar Messages
-
I have a go daddy email account and I can't get it to work on my iPad
I have a go daddy email account and I can't get it to work on my iPad
Try turning the email account off and then turn it on again. Settings>Mail, Contacts, Calendars>select your gmail account>Off. Go to the mail app and then come back to the account in the settings and turn it on again.
If you can't find any other way for the iPad to accept the password, delete the email account and then add it back onto the iPad. -
My touch screen is not responding, I have reset the phone, plugged into different charger and tried to update it to itunes but they will not connect because I cannot put my passcode in, HELP please!
ME TOO. NOW MY IPHONE 6 PLUS IS SAME LIKE YOU.
iphone is diabled- connect to iTunes because i forget passcode.
i cannot connect iTunes because it's always asking to enter passcode on iphone.
So, i cannot make restore my iphone 6+. And then, I cann't erase "device" in icloud.
My iphone is new. No icloud. didn't connect to itune backage.
That's why I try to connect iTunes but it need to enter passcode.
So, my iphone just keep "iphone is disbled-connect to iTunes".
IPHONE 6 PLUS -
I have just got a iPhone 4s and I can't get the iCloud to work, everytime I turn on auto downloads it defaults back to off, can anyone help?
Welcome to the Apple Community.
Check you are logged into your store account properly (settings > store). Also check there are no restrictions set that might be causing this (settings > general > restrictions) -
Does anyone know the best (or acceptable) outputs (v and mA) for AC-USB chargers? I have a few post-market choices, and I can't get the specs for the bona fide Apple $29 charger. Thanks; no hurry.
Does anyone know the best (or acceptable) outputs (v and mA) for AC-USB chargers? I have a few post-market choices, and I can't get the specs for the bona fide Apple $29 charger. Thanks; no hurry.
-
HT201412 I have tried all of the above and still can't get my ipad to respond
I have tried all of the above and still can't get my ipad to respond
Everything? Did you see the very last part about restoring the iPad and did you notice that there is another link in that step in case you cannot restore the iPad?
Symptoms
Your iPhone, iPad, or iPod touch may occasionally stop responding to buttons, switches, or touchscreen input and may exhibit one or more of the symptoms listed below.
Resolution
If any of these symptoms occurs, follow the steps in this article to resolve the issue. The device:
Does not return to the Home screen after pressing the Home button
Does not wake from sleep after pressing the Sleep/Wake button
Does not turn on (or power on) when pressing any button
Appears frozen or unresponsive
Is unable to "Slide to Unlock" or "Slide to Power Off"
If a single application is not responding or freezes when it opens, you can force it to close
Press and hold the Sleep/Wake button until the red slider appears. When the red slider appears, release the Sleep/Wake button.
Instead of dragging the red slider, press and hold the Home button for six seconds.
If the device does not return to the Home screen, see the steps below to restart.
If the device is unresponsive or certain controls aren't working as expected, try restarting
To turn off the device, press and hold the Sleep/Wake button until the red slider appears.
Slide your finger across the slider to turn off the device.
To turn on the device, press and hold the Sleep/Wake button until the Apple logo appears.
If the device remains unresponsive or does not turn on (or power on), try resetting
Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds.
If there is no video, verify that the device has enough charge to turn on
If you are using an iPad, ensure that it's connected to the 10W USB Power Adapter.
Let charge for at least twenty minutes, then see if it starts normally.
If there is no image on the screen, press the Home button to attempt to wake the device.
If the screen displays a red battery icon, let the device to continue to charge until it turns on.
If the above steps do not resolve the issue, or the if the screen remains black or shows a persistent Apple logo, try restoring with iTunes
Connect the device to your computer and open iTunes.
If the device appears in iTunes, select and click Restore on the Summary pane.
If the device doesn't appear in iTunes, try using the steps in this article to force the device into recovery mode.
Additional Information
Ensuring that your iOS device is kept updated to the latest software should minimize the occurrence of these issues. -
My hp c4599 printer will not connect to my wireless network
My hp c4599 printer will not connect to my wireless network or show up on my computer during the installation even though it is usb connected. But it managed to create its own network where i can print wirelessly by selecting it sort of like bluetooth… I have installed different softwares from the hp website and looked at so many different forums but i cant find the answer. I have reset the printer and wireless network and god knows whatelse. I can also print fine through the usb cable, it just will not connect to my wireless network. I am going crazy P.S. once upon a time it was connected to my wireless network but i cant remember what happened.
So can someone please help and please dont be too technicalHi ..
Try these support articles ..
OS X: Connecting a Wi-Fi printer to your Wi-Fi network
Mac Basics: Printing in OS X -
My ipod (version 6.1.3) was connectiong to my home wi-fi just fine until I uploaded new music from my itunes via my laptop. Now my ipod and my iphone will not connect to my wireless network. I've uplugged my wireless network and reset my network settings etc... nothing seems to work. Please help!
Does the iOS devices connect to other networks?
Does the iOS devices see the network?
Any error messages?
Do other devices now connect?
Did the iOS device connect before?
Try the following to rule out a software problem:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on the router
- Reset network settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- Wi-Fi: Unable to connect to an 802.11n Wi-Fi network
- iOS: Recommended settings for Wi-Fi routers and access points
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar
Since both iPhone and iPod stopped connecting I suspect a problem with your network. -
Have a 802.11n time capsule, the range of the wireless network has shrunk down to nothing over last few days. Used to be able to use wireless network anywhere in house, but now can only use in my office. Will not connect to iphones, ipad, itouch, or notebook. Worked fine last week, but over weekend just started having issues.
It is very possible that you may have some form of Wi-Fi interference that has appeared recently that is preventing your Time Capsule (TC) from providing a clean RF signal.
I suggest you perform a simple site survey, using utilities like iStumbler, or AirRadar to determine potential areas of interference, and then, try to either eliminate or significantly reduce them where possible. Look for other Wi-Fis that may be operating nearby. Note those with the strongest signals and which channels they are operating on ... then change the channel used by the TC to be at least 3-5 channels away. -
My print apps will not connect to the internet ENVY 100 e-All-in-One Printer series - D410 (CN517A)
The printer is connected and all other functions are working, it is just the apps get a connection error when I try to connect.Check out this document. It's about this specific error. I had the same error message and downloaded all the updates. Now the web apps are working.
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02855106&cc=us&dlc=en&lang=en&lc=en&product=407... -
Hi can anyone help me, my daughters macbook will not pick up the wireless signal in her bedroom when me and my wifes iphone picks it up easy. any ideas to help please.Andy
P.S i;ve heard a comment about the G5 case not being
great for wireless so the cards come with a plastic
antena that connects to the back of the machine - i
never recieved one of these - could that be the
problem?
Newer G5 PowerMacs don't require the external t-shaped aerial, earlier models do and that is probably the cause of the problem.
iFelix -
I have just upgraded to the 7 and I can't get my iMessages or FaceTime to activate
I have just upgraded to iOS 7 and I can't activate my iMessages or FaceTime. Pls help
Hello Dani1970,
Thanks for using Apple Support Communities.
For more information on this, take a look at:
iOS: Troubleshooting FaceTime and iMessage activation
http://support.apple.com/kb/ts4268
Best of luck,
Mario -
7th Gen Non and iMac appear on each others device list but will not connect
My new 7th Gen nano and imac appear in each others blue tooth devices list but will not connect. I've tried several time and have reset the nano twice. All suggestions greatfully received.
AlHey Al,
I read that your iPod nano is compatible with the following Bluetooth items: headsets, speakers, and hands-free systems in some automobiles. These are the profiles it supports:
Advanced Audio Distribution Profile (A2DP)
With the Advanced Audio Distribution Profile, you can stream high-quality audio (stereo or mono) from one device to another over a Bluetooth connection. Use it to play music wirelessly from iPod nano to a wireless headset or a compatible car audio system.
Audio/Video Remote Control Profile (AVRCP)
With this profile, you can remotely control playback functions on the iPod nano from compatible devices (commonly Bluetooth devices that use the A2DP profile). iPod nano works with the pause, play, stop, next track, and previous track commands.
Bluetooth Low Energy (BT LE)
Use low-powered Bluetooth accessories with the Bluetooth Low Energy profile. iPod nano works with Bluetooth Smart Heart Rate Monitors.
via: iPod nano (7th generation): Supported Bluetooth profiles
http://support.apple.com/kb/HT5479
That sounds like it might be why you're having difficulty connecting. If you want to sync your iPod nano with iTunes, I'd read through this document:
iTunes: Syncing media content to iPod
http://support.apple.com/kb/HT1386
Welcome to Apple Support Communities!
Take care,
Delgadoh -
My MacBook Pro persistently will not connect to my MiFi Verizon wireless router. The message "connection timeout" appears. What is a connection timeout and how can I fix?
Hi there terri900!
You may want to try configuring your router settings to match the recommended settings for iOS and OS X devices, which can be found here:
iOS and OS X: Recommended settings for Wi-Fi routers and access points
http://support.apple.com/kb/ht4199
You may also find some helpful information for troubleshooting this issue in this article, which can help you with any manner of issues with Wi-Fi connections:
Wi-Fi Quick Assist
http://support.apple.com/kb/HT1145
Take care, and thanks for visiting the Apple Support Communities.
-Braden -
I have windows 7 on my laptop and i can't get my songs to work.
I have windows 7 on my laptop and the current version of iTunes. For the past two days I cannot play songs from my music or purchased list. I can't even play the sample of a song in the iTunes store. I click on play on it does nothing. What's wrong?
Another standard diagnostic step is to try Firefox's Safe Mode to see whether it is caused by a custom setting or add-on.
First, I recommend backing up your Firefox settings in case something goes wrong. See [https://support.mozilla.com/en-US/kb/Backing+up+your+information Backing up your information]. (You can copy your entire Firefox profile folder somewhere outside of the Mozilla folder.)
Next, restart Firefox in [http://support.mozilla.org/kb/Safe+Mode Safe Mode] using
Help > Restart with Add-ons Disabled
In the Safe Mode dialog, do not check any boxes, just click "Continue in Safe Mode."
Does Firefox behave any better? -
I have changed my password 4 times and still can"t get it to work work
i have changed my password 4 iimes and it still won"t work
'tis not your Adobe® password that you need... but your Operating System Adminsitrator password.
Maybe you are looking for
-
Hi Experts, Iam uploading data for the tcode f-02. My flat file is having more than 1500 line items. But it is throwing a message "Item 1000 should be created, a maximum of 999 items are allowed" Could you please telll me the reason........ Regards
-
I have xml file in which i want to edit or add or delete the contents..
Hi I need your help, How to remove some contents and modify some contents from xml file... <book> <peson> <name> AAA</name> <age>12 </age> </person> <peson> <name> DAA</name> <age>21 </age> </person> <peson> <name> CAA</name> <age>32 </age> </person>
-
Dev Webdynpros/BSPS on WAS640 for a R/3 46c backend.
Hi, As mentioned, either a webdynpro or a BSP application needs to be developed on WAS 640 for an R/3 46C residing in the backend. The problem: We need to access a transaction (VA21 in SD R/3 4.6C)over WebDynpro/BSP. I have earlier come across access
-
I can't install any apps from the AppStore on my MacBook, why?
I can't install any apps from the AppStore on my MacBook, why?
-
Safari wants login everytime it's launched since upgrading to beta 4
I received the UNLOCK KEYCHAIN dialogue box saying: Please Enter Your Keychain Password; Safari wants to use your keychain "login". This seems to happen every time I open Safari or select an additional tab. Help me figure out how to turn this off! It