I have a HP printer I am trying to scan a report into my computer how do I do that

I have a HP printer can someone tell me the steps to do to scan a report to my computer so I can email it to someone
Thank You

Hey @calsax,
Scan settings may have been adjusted and are now causing you not to be able to scan multiple pages into 1 file.
As stated in the support document:
Scan from Windows 7 With the Full Feature HP Software for HP Multifunction Printers
Click Scan. A preview of the scan displays (by default).
Important: The Scan Preview feature must be enabled in order to scan multi-page documents into a single file. Additional pages from the original are added to the single file in the Scan Preview window.
When the scan preview displays, perform one of the following actions:
Click the Plus sign () on the left side of the window to scan additional pages. If you are not using an ADF, you will need to load the next page of the document onto the scanner glass to add each additional page.
NOTEcanning additional pages is supported at 300 dpi or lower.
If you are not satisfied with the scan, click the X icon () to delete the scanned file, and then click Back to scan a new file.
Click Save to capture the scanned file but leave HP Scan open.
Click Done to capture the scanned file and close HP Scan.
Please make sure that your scan DPI is set to 300 or lower. You will need to launch the HP Scan software on your computer in order to locate these options. They are normally located on the right hand side of the main HP Scan screen.
If everything is set as it should be and you're still not getting the option to scan multiple pages into 1 single file, please run an uninstall and reinstall of your software and drivers from your computer.
Uninstalling the Printer Software
Installing the Printer Software for a Wireless Network Connection
Please let me know how this goes!
X-23
I work on behalf of HP
Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
Click the "Kudos, Thumbs Up" on the right to say "Thanks" for helping!

Similar Messages

I'm trying to scan a document into my computer from an printers\hpf7a4f8 (hp photosmart plus b210.

I'm trying to schan a doc into my computer from a Printers\HPF7A4F8 (HP Photosmart Plus B210 series). I'm using windows 7. All other funtions seem to work but when I try to scan the doc, the HP message says it doesn't find the printer (yes, the printer it brought up to ask what I wanted to do).

DAReese13 wrote:
I can't believe that iTunes doesn't have this feature, as even the most basic music players always have this.
It does have that feature. Why would you assume that it doesn't?
DAReese13 wrote:
I'm trying to find an easy way to import my MP3 collection into iTunes without moving, copying or changing it.
Okay, no problem.
If the top bar menu is not displayed in top left of your iTunes Library, use the CTRL+B keys to turn it on:
On that menu, use File/Add Folder to Library and navigate to the folder you wish to add:
If you wish to add just one song, notice the File/Add File to Library command on that menu as well.
Alternatively, you can drag-and-drop from the file's location into your iTunes Library.
That's all there is to it.
By the way, it is possible to have Amazon MP3s downloaded to your computer and then automatically added to the iTunes Library by the Amazon downloader. I do it all the time.
Message was edited by: the fiend

I have 67 email addresses I want to add to address book into a group, how do I do that

I have 67 email addresses I want to add to address book into a group, how do I do that

What version of the Mac OS are you running?

I have a mx860 printer scanner. All my scans are coming up photos. How do I scan documents

I have a MX 860 printer scanner. All of my scans are coming up as photos. How can I make it scan documents

Hi WSF,
To scan in documents as PDF files, please follow the steps below:
1. Start MP Navigator EX.
     1-1. If on a Windows computer: Go to your START MENU, then ALL PROGRAMS, then CANON UTILITIES, then CANON MP NAVIGATOR EX (folder), then CANON MP NAVIGATOR EX (application). There may also be an MP Navigator icon on your computer desktop; if so, you can just double-click on that to open the application.
     1-2. If on a Mac: From your GO menu, select APPLICATIONS and then CANON UTILITIES. In the CANON UTILITIES folder, locate the MP NAVIGATOR EX program and open it.
2. When MP Navigator opens, click on the SCAN/IMPORT option at the top left of the window, then click the STACK OF DOCUMENTS (ADF) option.
3. Place the documents you want to scan in the automatic document feeder on the top of the printer, then select your Document Type (either Color or Black and White Photo or Document).
     3-1. Please note: When you select Magazine(Color), the Descreen function will be enabled and scanning takes longer than usual. To disable the Descreen function, deselect the Descreen checkbox in the Scan Settings dialog box.
     3-2. Select Text(OCR) to extract the text in the image and convert to editable text data using MP Navigator EX. This setting is not available when the Compress scanned images when transferring checkbox is selected on the General tab of the Preferences dialog box.
     3-3. Color scanning is not available for Text(OCR). To scan in color, use OCR in One-click and scan with Color Mode set to Color.
4. Click SPECIFY... to modify the document size and resolution as required, then click OK. By default, the document size selected is 'Auto Detect', and the Resolution selected is '300 dpi'. Both of these settings are usually satisfactory if you want to scan a document in as-is. If you need to specify a higher resolution scan or specific document size, please click on the 'SPECIFY' button.
5. Click the green SCAN button on the screen. Scanning starts. When scanning is completed, the Scan Complete dialog box opens.
6. Select SCAN or EXIT. You will select 'Scan' to scan the next document if there is one, or select 'Exit' to end scanning.
7. The scanned images appear in the Thumbnail window. To save a multi-page document, you will want to ensure that you put a checkmark under each of the scanned thumbnail images that you want to save. If only one thumbnail image is selected, it will only be a one page document.
8. Save the scanned images by selecting 'SAVE AS PDF' option on the bottom left-hand corner of the window. Selecting the 'SAVE AS PDF' option will save your file in a PDF format. This is good for saving documents, letters, etc. When you select this option and have multiple thumbnail images selected, the window that will appear will be a multi-page PDF save window.
9. Once you make a selection in Step 8 above, a window will appear giving you additional options for the file you are trying to save.
     9-1. The 'SAVE IN' section will show you where the document is going to be saved. By default, the files are saved in the Pictures folder in a folder labeled 'MP Navigator EX'. If you would like to specify a different location to save the files to, please click on the 'BROWSE..' button and select the location where you want to save the file, the press the 'OK' button to return to the save window.
     9-2. The 'FILE NAME' section will let you name the file you are saving. By default, the file name will be 'IMG'; you can delete that out and name the file whatever you like.
     9-3. The 'SAVE AS TYPE' section will allow you to choose the file output type. If you selected an image file, you will have the option of JPEG/EXIF, BMP or TIFF; if you selected the 'Save as PDF' option, you will be able to save the file as a single or multi-page PDF file.
     9-4. The 'SAVE TO A SUBFOLDER WITH THE CURRENT DATE' option will let you save the file in a subfolder with the current date inside of the folder location you selected in step 9-1 above. If do not want a subfolder created with the current date inside of the folder you selected in step 9-1 above, please uncheck the 'Save to a Subfolder with Current Date' option.
10. Click the SAVE button. The scanned images will be saved according to the settings you selected above.
11. Once the file is saved, you will be given the option to 'OPEN SAVE LOCATION' or 'CLOSE'. I would suggest selecting 'Close', and then going directly to the location where you specified the file be saved to. From there, you should be able to double-click on the file to open it.
Hope this helps!
This didn't answer your question or issue? Find more help at Contact Us.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

I have purchased lightroom and need to down load it onto a different new computer-- how do I access that??

I just purchased a new computer. I have lightroom installed on my other computers- how do install it on my new computer.

What version do you need? Download Lightroom 5.6
For Windows : Adobe Photoshop Lightroom 5.6
For Macintosh : Adobe Photoshop Lightroom 5.6

HT201342 i have a 10.6.8 mac os x system in a intel processor computer. how can I addressbook contacts to icloud. I tried exporting my import my addressbook and failed, then exportind a vcard from all contacts and failed and finale only one vcadr and fai

i have a 10.6.8 mac os x system in a intel processor computer. how can I addressbook contacts to icloud. I tried exporting my import my addressbook and failed, then exportind a vcard from all contacts and failed and finale only one vcadr and failed. Something might i doing wrong

I just had the same problem, I've updated to 10.6.8 yesterday, and since then the browsing are very slow, no matter what broswer I am using, the upload download speed are still the same. But browsing just take forever, It takes for example google.com 30 seconds to load. I have Extream high speed internet connection, 3 other computers, and the only one is having this problem is the Mac after the update.
Something in this update screwed my browsing capabitilties, I tried downloading Crome browser, same issue.
I hope there is a way beside TimeMachine to revert the latest update. I don't want to reformat as I am sure as soon as I am going to do the update it will cause the same problem.
Model Name:    iMac
Model Identifier:    iMac11,3
Processor Name:    Intel Core i7
Processor Speed:    2.93 GHz
Number Of Processors:    1
Total Number Of Cores:    4
L2 Cache (per core):    256 KB
L3 Cache:    8 MB
Memory:    12 GB
Processor Interconnect Speed:    4.8 GT/s
Boot ROM Version:    IM112.0057.B00

I am trying to watch a video and it says I might have to copy link directly into QuickTime. How do I do that?

I can't get a video to play. It says I have to copy link into QuickTime. How do I do that?

Quicktime does not run on iPhones.

Trying to discard an app into TRASH and I receive a message that "app cannot be removed because it is locked." How can I unlock an app???

Trying to discard an app into TRASH and I receive a message that "app cannot be removed because it is locked." How can I unlock an app???

Something may have corrupted your User account permissions. Whatever it was that did that is likely to do it again, and will require further investigation.
To reset your User account permissions perform the following. It may not fix the problem but it will not make it any worse:
Boot OS X Recovery by holding ⌘ and r (two fingers) while you start your Mac.
When the Mac OS X Utilities screen appears, select Utilities > Terminal.
In the Terminal window type resetpassword and press Enter. A window will open behind Terminal that looks like this:
Do not enter a new password.
Select your startup volume at the top. From the dropdown below it, select the user account with the problem.
At the bottom of the window, you will see Reset Home Directory Permissions and ACLs.
Click the Reset button.
Quit Reset Password
Quit Terminal
Quit OS X Utilities and restart your Mac.
Back up your system before doing anything else because disk corruption is another possibility that has to be considered.

I am a new ipod touch user; have gone through all the dowload/install stuff, plugged the device into my computer but ipod screen still shows plug in to tunes. I am totally computer useless - how can I get my ipod to work, please? Charles Jones.

I am a new ipod touch user; have gone through all the dowload/install stuff, plugged the device into my computer but ipod screen still shows plug in to tunes. I am totally computer useless - how can I get my ipod to work, please? Charles Jones.

You did install the latest iTunes (10.5) right? If the problem was that iTunes does not see the iPod try:
iPhone, iPad, or iPod touch: Device not recognized in iTunes for Windows
or
iPhone, iPad, iPod touch: Device not recognized in iTunes for Mac OS X

HT201365 I don't like the iOS 7 upgrade. Do I have to upgrade or can I go back to the way it was? How would I do that?

I don't like the iOS 7 upgrade. Do I have to upgrade or can I go back to the way it was? How would I do that?

Unfortunately, reverting to an earlier version of iOS is not supported.

I am trying to save one picture in different versions- How do I do that- there is nothing that allows me to save as

I am trying to save one picture in different versions- How do I do that- there is nothing that allows me to save as- How do I do that??

http://www.apple.com/aperture/
Regards
TD

Hi everyone, can you guy help me? I'm trying to update my iPhone to iOS 5 how would I do that?

Hi everyone, can you guy help me? I'm trying to update my iPhone to iOS 5 how would I do that?

sync your phone to itunes, then it should say update available. I suggest doing a backup of your phone first prior to updating your phone.

I am trying to scan a document into PDF format but PDF is not coming up as an option. What can I do?

I am trying to scan a document into PDF format but PDF is not coming up as an option. What can I do?

Can your scanner software create PDF documents?

HT2305 i have windows 8 i want to down load i tunes to my new computer.How do I get the update for my itune windows 8

I have windows 8 and want to to down load itunes to my new computer how do i do it

You do not. There is currently no publicly available version of iTunes for Windows 8.

I don't have back up since last august but I accidentally delete the message recently. How can I undo that mess back ?

I don't have back up since last august but I accidentally delete the message recently. How can I undo that message back ?

If you haven't backed up to either your computer or iCloud, you can't get the message back. Let this be a lesson to either back your phone up to your computer or to iCloud (or both) regularly.

I have a HP printer I am trying to scan a report into my computer how do I do that

Similar Messages

Maybe you are looking for