I have a hp psc750 works great but like to upgrade can i and if so where

I have a hp psc750 works great and i have a hp photosmart 240 both works great like to upgrade can I and if so where thank you  Hope

Hi,
Please check page #1 of the following book. It has a list of supported CPU's from day 1.
  h10032.www1.hp.com/ctg/Manual/c01550108.pdf
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Similar Messages

  • Have a G3 pismo, works great, but when I plug in the power cord, the light won't come on to indicate its charging. It is charging, and the battery is good, its just that the light won't come on. Could it be something with the backup battery?

    I have a G3 bronze keyboard that works, with a good battery, but when the power supply is plugged in, the charging light on the back of the laptop
    will not come on. It is charging however, and have two different apple power adapters and both will charge the main battery, it's just that the light won't come on.
    Did a reset of the pmu, but no changes. The date stays current, but wondering if the backup battery could be getting weak and affecting it , or is something else going on?

    The power connector in the G3 PowerBook is a weak link.  Removed, it looks like this:
    [image from http://microdocusa.com/specials.html ]
    The connector probably hasn't failed, but the solder joints where "legs" on  the connector  attached to the logic/power board are under a lot of stress after 10 years of use. Little bumps and tugs on the power cord eventually degrade the connection. You can check for looseness easily---see if the connector feels loose when you GENTLY wiggle it with a fingertip. It should have zero play if it's still firmly attached. You can also plug in the power adaptor and see if slight movements if the plug make the light turn on. Pretty diagnostic of a loose connector.
    The date stays current,
    Make sure you are doing this check correctly. If you have an always-on internet connection, the date/time are fed froma  network time server and will always read properly unless you test with the internet connect turned off or disconnected.

  • I cannot send an email from my iPad 2? No problem receiving, why does this happen? Have tried the suggestions for setting up email and after doing the sync mail through iTunes receiving worked great but still cannot send? Any help would be great

    I cannot send an email from my iPad 2? No problem receiving, why does this happen? Have tried the suggestions for setting up email and after doing the sync mail through iTunes receiving worked great but still cannot send? Any help would be great!

    The fact that you can receive means you have a valid e mail address, and have established the connection to the incoming server, so all of that works.  Since the send does not work, that means your outgoing server is rejecting whatever settings you used formthe outgoing set up.  Try them again. 
    Google your particular isp, and ipad and many times you will find the exact settings needed for your isp.  Or tell us here, and soneone else may be on the same isp.  Some mail services need you to change a port, or have a unique name for the outgoing server.  
    Kep trying.

  • HT201272 I have tried several ways to transfer my itunes library and Playlists to a new computer. I get the music library but not the playlists. Can you advise? 2nd I purchased 21 new tunes yesterday on the new computer worked great but when I made a disc

    I have tried several ways to transfer my itunes library and Playlists to a new computer. I get the music library but not the playlists. Can you advise?
    2nd > I purchased 21 new tunes yesterday on the new computer> worked great> but when I made a disc to transfer the playlist. I get the music but no album info just 1,2,3,etc. So I have signup both computers to share thinking that would work. But no to that also.
    Please advise.
    Thanks,
    Bob

    Copy the entire /Music/iTunes/ folder from old computer to new computer.
    See this -> http://support.apple.com/kb/HT4527

  • My Touch ID works great, but because I have been using it, I now can't remember my password

    My Touch ID works great, but because I have been using it, I now can't remember my password.
    How can I reset my password?

    Hi Each day when you power up your iphone you have to use the 4 number passcode. How can you forget this in 1 day? Cheers brian

  • I have a Mac Book and purchased a Bose system that uses an antenna to play music from the the laptop - it works great, but the computer times out and shuts down - Help

    have a Mac Book and purchased a Bose system that uses an antenna to play music from the the laptop - it works great, but the computer times out and shuts down - Help

    Check in "System Preferences">"Energy Saver" to see if you have the "Computer Sleep" bar set too low.

  • I have a 2011 gen 2 iPad that works great but is it time to replace it?

    I have a 2011 gen 2 iPad that works great but is it time to replace it? 

    Ditto with my iPad 2 - have used it heavily since the day I bought it and it works great.  I've noticed the battery doesn't hold a charge as well and it takes quite a bit longer to recharge.  If everything keeps working I don't plan on replacing it until it can't be updated with the latest IOS version - the situation the iPad 1 is in.

  • Could you help me with an app situation? We purchased several codes for Splashtop to install on our iPad 2's. It was working great but now that we upgraded the OS they have disappeared. The codes that we purchased are giving us an error that they have alr

    Could you help me with an app situation? We purchased several codes for Splashtop to install on our iPad 2's. It was working great but now that we upgraded the OS they have disappeared. The codes that we purchased are giving us an error that they have already been used. So far it has only been 2 iPads. 
    Any solutions?

    The compiler is highlighting the areas you got wrong, although the error messages are somewhat confusing.
    Error 1: NSLog is a function and needs to be called as such, see e.g. the circleArea call on the line above. Functions are called using the function-name with its arguments in paratheses e.g. foo(12, 13).
    Error 2: looks like a typo, defining a function is done as function-name(... <arguments> ...) { ... <body> ...}. In your code there is a ";" between the arguments and the body that should not be there, you probably copy pasted it from the forward declaration at the top of the source codde file.

  • I have new iPhone 6 all working great but problem is no any bar on signal can help me

    Hi ggot my iPhone 6 all working great but problem is no any bar on signal 02 try new sim card same problem any can help me

    Greetings andyirons,
    Welcome to the Apple Support Communities!
    I understand that you are receiving low signal strength on your iPhone. In this situation, even though the attached article was written for situations with no signal, I would still suggest working through these same steps to troubleshoot. 
    If you see No Service in the status bar of your iPhone or iPad - Apple Support
    Cheers,
    Joe

  • Phone works great but when on a call proximity sensor kicks in turns off the screen. When I pull the phone away from my head screen is still blank. The force hangup/lock is the only way to bring the screen back on

    hi,
    phone works great but when on a call proximity sensor kicks in turns off the screen. When I pull the phone away from my head screen is still blank. The force hangup/lock is the only way to bring the screen back on.
    I purchaged it before one month onl. So i wont understand how it comes. Please help me. I am waiting for you reply.

    "Your face is so ugly, it broke your phone!" Ha ha. Get it? How I was joking there? About your iPhone not working correctly after... <sigh>
    But seriously, you said the situation only happens when you have been on a long call, so maybe the iPhone is just autolockng?

  • My CS2 was working great but now error that my name, org and serial number are mussing and must close

    my photo shop 9 CS2 was working great but now error that my name, organization and serial number are mussing or invalid and must close>how do  I fix this I was given a download file and do no have cd to reload it??

    Does this apply?
    Error: Activation Server Unavailable | CS2, Acrobat 7, Audition 3

  • I bought a iphone 4s of ebay it works great but i want to use the passcode but can't because he can't remember what he put it as

    i bought an iphone 4s of ebay and it works great but i went to set up a passcode but the person who had it before has put one on there and he can't remember what it is, is there anyway of resetting it

    If You Are Locked Out Or Have Forgotten Your Passcode
    iTunes 10 for Mac- Update and restore software on iPod, iPhone, or iPad
    iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
    iOS- Understanding passcodes
    A Complete Guide to Recover Your iDevice if You Forget Your Passcode
    If you cannot remember the passcode, you will need to restore your device using the computer with which you last synced it. This allows you to reset your passcode and resync the data from the device (or restore from a backup). If you restore on a different computer that was never synced with the device, you will be able to unlock the device for use and remove the passcode, but your data will not be present. Refer to Updating and restoring iPhone, iPad and iPod touch software.
    Try restoring the iOS device if backing up and erasing all content and settings doesn't resolve the issue. Using iTunes to restore iOS devices is part of standard isolation troubleshooting. Restoring your device will delete all data and content, including songs, videos, contacts, photos, and calendar information, and will restore all settings to their factory condition.
    Before restoring your iOS device, Apple recommends that you either sync with iTunes to transfer any purchases you have made, or back up new data (data acquired after your last sync). If you have movie rentals on the device, see iTunes Store movie rental usage rights in the United States before restoring.
    Follow these steps to restore your device:
         1. Verify that you are using the latest version of iTunes before attempting to update.
         2. Connect your device to your computer.
         3. Select your iPhone, iPad, or iPod touch when it appears in iTunes under Devices.
         4. Select the Summary tab.
         5. Select the Restore option.
         6. When prompted to back up your settings before restoring, select the Back Up
             option (see in the image below). If you have just backed up the device, it is not
             necessary to create another.
         7. Select the Restore option when iTunes prompts you (as long as you've backed up,
             you should not have to worry about restoring your iOS device).
         8. When the restore process has completed, the device restarts and displays the Apple
             logo while starting up:
               After a restore, the iOS device displays the "Connect to iTunes" screen. For updating
              to iOS 5 or later, follow the steps in the iOS Setup Assistant. For earlier versions of
              iOS, keep your device connected until the "Connect to iTunes" screen goes away or
              you see "iPhone is activated."
         9. The final step is to restore your device from a previous backup.
    If you can not restore your device then you will need to go to recovery mode.
    Placing your device into recovery mode:
    Follow these steps to place your iOS device into recovery mode. If your iOS device is already in recovery mode, you can proceed immediately to step 6.
         1. Disconnect the USB cable from the iPhone, iPad, or iPod touch, but leave the other end
             of the cable connected to your computer's USB port.
         2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the
             red slider appears, then slide the slider. Wait for the device to turn off.
              If you cannot turn off the device using the slider, press and hold the Sleep/Wake
              and Home buttons at the same time. When the device turns off, release the Sleep/Wake
              and Home buttons.
         3. While pressing and holding the Home button, reconnect the USB cable to the device.
             The device should turn on. Note: If you see the screen pictured below, let the device
             charge for at least ten minutes to ensure that the battery has some charge, and then
             start with step 2 again.
         4. Continue holding the Home button until you see the "Connect to iTunes" screen.
             When this screen appears you can release the Home button.
         5. If necessary, open iTunes. You should see the following "recovery mode" alert:
         6. Use iTunes to restore the device.
    If you don't see the "Connect to iTunes" screen, try these steps again. If you see the "Connect to iTunes" screen but the device does not appear in iTunes, see this article and its related links.
    Additional Information:
    Note: When using recovery mode, you can only restore the device. All user content on the device will be erased, but if you had previously synced with iTunes on this computer, you can restore from a previous backup. See this article for more information.

  • How do I stop kitkat! It trashed my razrm they replaced it, new one is working great but now 4 days later kitkat is trying to get on my new phone

    Kitkat trashed my razrm they replaced it new is working great but kitkat is trying to get on it how do I stop it? Why are they still putting it out?

        gpjfh84,
    Thanks for reaching out to us. I'm glad that you were able to get the phone replaced. There is not a way to block the Kit Kat up date from coming through. You can always reject the option to update. If you have any further questions or concerns please feel free to reach out to us at anytime.
    KevinR_VZW
    Please follow us on Twitter @VZWSupport

  • Recently started using "Remote" works great, but shows the entire library instead of only the checked songs

    Hello,
    In my itunes libraryI've got about 3000 songs, I only play 500 at a time. For my iphone I just Check the songs I want to sync, as well with Logitech SqueezBox.
    Recently I've started using the iTunes Remote, that works great, but it shows all the songs. is there any way to fix that?
    Any way to change the setting in which it will only show the Checked songs?
    Thank you very much

    Make sure you don't have the Manually manage music and videos box check on the Summary tab

  • Hi. I have set up the trial versions of Photoshop CC 2014 and Lightroom 5.6 (ie the Photography plan) on a desktop that I have added a new drive to with Windows 7. Everything works fine BUT it is an old computer and I'm thinking that it may pack up unexpe

    Hi. I have set up the trial versions of Photoshop CC 2014 and Lightroom 5.6 (ie the Photography plan) on a desktop that I have added a new drive to with Windows 7. Everything works fine BUT it is an old computer and I'm thinking that it may pack up unexpectedly. These things happen. I want to sign up for the Photography plan but I also have a Windows Vista laptop, and that is old too so I may want to put the apps on a new desktop and a new laptop, having already installed on my desktop. That makes three activations. Am I allowed to do this? Cheers. Paul

    You cannot have three activations. It's simply not technically possible. If and when the time comes, you simply deactivate/ sign out on one of the old systems and install on the new one. If the system goes belly up, you contact support to reset your account. No need to make it more complicated than that and overthink it.
    Mylenium

Maybe you are looking for