I have a HP Touchsmart 300-1020 that powers up but the screen stays black. help!

I've been experiencing problems intermittently after shutting my TouchSmart 300 PC down. For the past few days when trying to turn it on ; the screen stayed black! I could hear the fan start rapid then slow down, I can see the green internal light blinking inside and lights on the outside of the computer but still nothing on the screen! I've tried plugging it into different outlets around the house was successful with one, but then, came the error message;
Page fault in nonpaged area. Today I tried to turn it on and I got the same thing described above. The computer's operating system is Windows 7 64-bit, purchased Feb. of last year and is refurbished.

Hi
You have a couple of options as I see it please run the Hard drive and Memory test check if both off then passes if any fails then you need to replace the part. If test passes you could try The F11 option to do system restore Or to do a recovery on the unit before doing recovery kindly back up data as it will be lost web link given below this will help you to let you know how to do the steps.
Troubleshooting Error Messages on a Black Screen that may Occur During Startup or Boot
Testing a Hard Disk using the Built in Self Test
Restore the PC to its original condition using the f11 key
Let us know how it goes!
*Although I am an HP employee, I am speaking for myself and not for HP.
****Click the White Kudos star to say thanks****
****Please mark Accept As Solution if it solves your problem****
Regards
Manjunath
Let us know how it goes!
"I work for HP."
****Click the (purple thumbs up icon in the lower right corner of a post) to say thanks****
****Please mark Accept As Solution if it solves your problem****
Regards
Manjunath

Similar Messages

When i try to wake my macbook after sleep the keypad lights up but the screen stays black. I have to switch off and restart. How do I fix this?

After my Macbook goes into sleep mode it sometimes won't wake. The keypad lights up but the screen stays black. This problem has only occured after updating to OSX 10.7.2.
All I can do is switch off and restart. Then any programs I have not 'quit' all open.

OK, I have a fix.
After spending about an hour online with Apple Care without success, I did a reinstall of the Lion OS. It fixed the problem. I was concerned that I would lose data or settings, but the reinstall was seemless and everything was the way it was before the reinstall except that the "black screen on wake" problem was fixed.
I started the reinstall before I went to bed and it was waiting for me the next morning.
Here is a link to the page on how to do the reinstall:
http://support.apple.com/kb/HT4718?viewlocale=en_US&locale=en_US
Hope this helps.

I have a mac which plays the boot sound but the screen stays black. Recovery mode does not work, as the keyboard is wireless. What do I do?

What it says in the title.
I have an older mac and it worked perfectly until about an hour ago when I shut it down because we needed the room dark for a presentation and the screen saver was putting out light.
Now it won't turn back on. It plays the start up music but the screen stays blank.
The CMD+OPT+R for recovery mode doesn't do anything, the keyboard is wireless so the command doesn't get to the computer and that's the only keyboard I have since that's the one it came with.
I'm looking at making a USB recovery disk but it says that I should click on "Options" in the Disk Utility but there is no options button or menu to click.
From here: OS X: About Recovery Disk Assistant in step 3 I get stuck.
Also it says that if I make a drive on this computer which has an older OS it might not work on the broken machine with Mavericks.
This machine literally worked and I turned it off and now it does not work and there seems to be nothing I can do... ***...

kodemage wrote:
well, then recovery mode does not work. I've tried all the key combinations I've seen on line. Command+R, Command+Option+R, Command+Option+P+R, none of these work.
I don't believe there is anything we can do on a forum to help then, you need to take it into a AASP and have it professionaly diagnosed. If you don't know how to locate an AASP in your area you can begin by using Contact Apple for support and service
Good luck.

The screen to my iPhone 4 went completely black. Ive tried turning it on and off, plugging it in, restoring it from my iTunes but the screen stays black. It connects to iTunes and when i plug it in, it vibrates like I have a text.

Why does the screen turn black? I was using it normally and it all of a sudden faded to black and hasnt come back on since yesterday. You can see the back light but no image on the screen. Ive plugged it in and it vibrates that its connected but still the screen stays black. I left it alone while I slept and tried again in the morning but still nothing.

So weird mine is doing the same thing. I didnt drop it or anything. I was texting and it suddenly went white and then turned black. It says its plugged into itunes but the screen comntinues to stay black.

I have an iphone 4s that is having display issues. If I turn the phone on, it vibrates to acknowledge it successfully turned on but the screen stays solid black. I can plug the phone into my computer and itunes will recognize the phone as well.

I have an iphone 4s that is having display issues. If I turn the phone on, it vibrates to acknowledge it successfully turned on but the screen stays solid black. I can plug the phone into my computer and itunes will recognize the phone as well. However, itunes can not do anything with the phone because the phone is locked and I can not unlock the phone because the screen is black.
>CURVEBALL!!!<
The screen does work though! Through trial and error along side a little troubleshooting, I was able to figure out that the screen will cut on after the phone dies completely. The phone has to die completely with no battery power left. Then if I plug the phone into a charge and wait a while for it to charge, the phone will turn on like nothing was ever even wrong with it. I charge the phone up to like 30% and turn it off then bam the phone turns on but the screen is solid black again.
I am currently in the process of waiting for the phone to die and when I turn the phone back on I am going to completely remove the auto-lock and lock code off of the phone for the time being.
Any other suggestions? Please help!

Sounds like the device was dropped at some point and damaged as a result.
Take it to Apple for evaluation and a replacement.

I've got a mac that powers up but just show a black screen? Any ideas?

I've got a mac that powers up but just show a black screen? Any ideas?

Try booting into Safe Mode , if it works then you know its a software issue. If not then you will have to take it in for service.

My iphone doesn't ring when it's unlocked .. i have calls but the screen still black and when i slide to unlock the screen i found i had missed calls

My iphone doesn't ring when it's unlocked .. i have calls but the screen still black and when i slide to unlock the screen i found i had missed calls
i have tried manythings but it doesn't work
i put it in silent mode and i found my calls comes normaly and it works good but when i turn on ring mode it's back as it how can i fix that ?!

Basic troubleshooting steps outlined in the user guide are restart, reset, restore from backup, restore as new device. Try each of these steps until your problem is solved. If these steps fail to solve your issue, then you'll need to bring your phone into Apple (or an authorized service provider in your area) for evaluation.

I turn on my macpro and the screen is black. I get the My new MacBook pro chime when turning it on but the screen is black and stays that way ??????

I turn on my macbook pro retina display and the screen is black.
I get the chime when turning it on but the screen is black and stays that way ??????
macbook pro is new..28 days old...
please help.

Maybe:
http://osxdaily.com/2014/11/22/fix-macbook-pro-booting-black-screen/
You also have 90 days of free telephone support
Complimentary Support (USA)
BTW, this is the Mac Pro desktop forum

IPhone black screen does not show anything, but I can hear that the device works. I hear the lock open the screen and hear the iPod but the screen remains black

IPhone black screen does not show anything, but I can hear that the device works. I hear the lock open the screen and hear the iPod but the screen remains black!!

It's happened to me before as well. Try holding both lock(top right) and home buttons simultaneously until u see a slight flash of wight then just reboot it normally. If that doesn't work try restoring your device from itunes

I accidentally dropped macbook air that was in a book bag. The keyboard is working because I can see the light but the screen is black and it won't turn off. How should I fix this? Please Help ME!!

I accidentally dropped my friend's macbook air that was in a book bag. The keyboard is working because I can see the light but the screen is black and it won't turn off. How should I fix this? Please Help ME!!
I tried to turn it off and it didn't work... and I held on to the shift key too and it still doesn't work..
Please help me..

Accidental damage is not covered under Apple warranty. And it seems there is much accidental damage. Only a Genius Bar tech looking at it can tell how much it will cost to repair.
Cost to repair will be high, I suspect (though Genius Bar will confirm/deny.
There is no gentle way to say this sir/ma'am ... someone will need to pay for your friend's MBA repairs.

My iMac will not turn on, the screen stays black, makes a whistling sound 3 short, 3 long, 3 short, well maintained while keeping on, what solution do you have?

My iMac will not turn on, the screen stays black, makes a whistling sound 3 short, 3 long, 3 short, well maintained while keeping on, what solution do you have?

For some reason its firmware seems to have been corrupted. Read:
About the Firmware Restoration CD (Intel-based Macs)
iMac (Mid 2007) and later models: About startup tones

I'm trying to install a new samsung 27" series 7 750 monitor. I have a macmini. when i plug the cord in between the computer and the mknitor, the screen goes white, but no display. When not plugged into the computer the screen stays black and cycles

I'm trying to install a samsung series 7 750 monitor for use with my mini mac. When I plug the computer to the monitor I get a blank screen, no picture. When not plugged in to the computer the screen is black and a square displAys that says analog, HDMI 1, HDMI 2. Any ideas?

Hey there saraszeg,
It sounds like you are trying to use an external monitor with your Mac Mini but cannot get more than a gray screen. You can use the following steps to help troubleshoot the Mac side of things here:
Apple computers: Troubleshooting issues with video on internal or external displays
http://support.apple.com/kb/HT1573
Remove all display cable extenders, KVM switches, or other like devices and retest to determine if the issue is resolved.
Try unplugging the video adapter or cable and then plug it back in.
If more than one video adapter is in use (or "daisy-chained"), troubleshoot by using only one adapter.
Example: A mini DisplayPort to DVI adapter connected to a DVI to HDMI adapter is an unsupported configuration because there is a series of adapters in use.
If available, try using a different display and or adapter (or use a different connector by using DVI instead of VGA, for instance).
Reset the system
You can reset the Mac's parameter RAM and SMC.
Reset the resolution
Start by resetting the Mac's parameter RAM. If the display does not come up, was previously set to an unsupported resolution, and still results in no video:
Start up in Safe Mode.
From the Apple () menu, choose System Preferences.
Choose Displays from the View menu to open the preferences pane.
Select any resolution and refresh rate that your display supports.
Restart your computer.
Thank you for using Apple Support Communities.
Take care,
Sterling

Have trouble with apple tv i rest it more than 4 times and the screen stays black plz help

I don't know what genl it is too? help srtarted working then stoped tried to watch something and told me could not find content tried to restoring and didn't work screen stays black

I am not sure. I have it since last November and I am using it so comfortably. I also have Installus and I am downloading every thing without any problem.

I have only had my iphone for about six weeks and today it will not turn on, nothing happened to it but the screen is black.

I have only had my iphone for about six weeks, and today it just died. Nothing happened to it, but I went to call someone and the screen was black, now it won't turn on or charge!????

Standard troubleshooting...
Try a reset by pressing the home and sleep buttons until you see the Apple logo, ignoring the slider. Takes about 5-15 secs of button holding and you won't lose any data or settings.
If still a problem restore with your backup.
If still a problem restore as new, i.e. without your backup. See how it runs with nothing synced to it.
If still a problem, it's likely a hardware issue.

I have a new iPhone 6 and when on a call the screen stays on so that buttons are knocked such as the numbers or mute.

I have an iPhone 6 and occasionally the screen will not go black while I am talking, This causes numbers to be hit or the mute to go on. What can I do?

Start by resetting
then restore with back up and if necessary restore as new
This will sort any software issues ,if iPhone is still not functioning correctly,take to an Apple store genius bar .make an appointment first to avoid a long wait

I have a HP Touchsmart 300-1020 that powers up but the screen stays black. help!

Similar Messages

Maybe you are looking for