I have a hp7250 all in one printer and it just stopped printing hp printer says radio not working

i have a hp 7250 all in one printer it just stopped printing my compute says its offline but when i go to pinter and try set up it says cannoct connect then review says raido not working

If that reset did not resolve the issue, and the printout indicates that the wireless radio is not working then there are a few options that we can go through. 
First, make sure that through the Setup Menu that the wireless has been enabled and turned on. If these options are not available, you may have to try a differnet reset that I will PM to you. 
Also, if the wireless radio is not functional then you might consider connecting the printer directly to the router using an Ethernet cord and reinstalling the printer on your computer using that method of communication. 
Let me know! Happy holiday! 

Similar Messages

  • HT201257 I just bought an imac in september 2012.  And i just find out that my microphone is not working.  So i did an apple hardware test and with no problems found?  I have sound but no one can hear me, not even the computer.  Should i bring it back to

    I just bought an imac in september 2012.  And i just find out that my microphone is not working.  So i did an apple hardware test and with no problems found?  I have sound but no one can hear me, not even the computer.  Should i bring it back to the store

    Before you go through that trouble open About this Mac > More Info... > System Report > Audio and see if the system actually knows it has a microphone.  Then you can look into Applications > Utilities >  Audio MIDI Setup and see if the microphone is there, select it and make sure the sliders are set to full. Then in System Preferences look for Sound > Input and make sure it shows up there and the sliders are at least half way up. If none of that works do a
    SMC RESET
    http://support.apple.com/kb/HT3964
    Shut down the computer.
    Unplug the computer's power cord and ALL peripherals.
    Wait 15 seconds.
    Attach the computers power cable.
    Wait another 5 seconds and press the power button to turn on the computer.
    It is the 5 second timing that initiates the reset.
    then go through the process of looking for the microphone again as the reset may reenable the mic.

  • Keep receiving "USB Over Current Notices" since updating to OSX 10.6.8. I have no devices plugged into my Imac and running everything wireless. SMB/PRAM resetting did not work. Does anyone have some advice or can help?

    Keep receiving "USB Over Current Notices" since updating to OSX 10.6.8. I have no devices plugged into my Imac and running everything wireless. SMC/PRAM resetting did not work. Does anyone have some advice or can help?

    Hi Melissa,
    Pretty strange, but...
    Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, does it happen in Safe Mode? Reboot when it completes.
    (Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)

  • I have a new all in one computor and I can't open E mails once I save them to Documents file.

    I have a new all in one HP computor which has windows 7. When I save a E mail to Documents I cand open it back up.I have charter internet and the E mails are HTML>

    Typically this is a problem when the sender creates the file with an extension that you, as the recipient, can not open.    What is the file extension?  
    Is it .docx?  If so, that requires MS Office Word 2010 or newer.  MS Office Word versons circa 1997-2003 used .doc as the file extension. The default in 2010 is .docx  There is an option within the save-as to select the older .doc extension.
    I am a volunteer. I am not an HP employee.
    To say THANK YOU, press the "thumbs up symbol" to render a KUDO. Please click Accept as Solution, if your problem is solved. You can render both Solution and KUDO.
    The Law of Effect states that positive reinforcement increases the probability of a behavior being repeated. (B.F.Skinner). You toss me KUDO and/or Solution, and I perform better.
    (2) HP DV7t i7 3160QM 2.3Ghz 8GB
    HP m9200t E8400,Win7 Pro 32 bit. 4GB RAM, ASUS 550Ti 2GB, Rosewill 630W. 1T HD SATA 3Gb/s
    Custom Asus P8P67, I7-2600k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX660 2GB, 750W OCZ, 1T HD SATA 6Gb/s
    Custom Asus P8Z77, I7-3770k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX670 2GB, 750W OCZ, 1T HD SATA 6Gb/s
    Both Customs use Rosewill Blackhawk case.
    Printer -- HP OfficeJet Pro 8600 Plus

  • HT2638 since updating iPhoto it has ceased to open.  i have tried to Hold down the Command and Option keys on the keyboard but it does not work.  iPhoto still does not open

    Since updating iPhoto it has ceased to open.  I have tried to Hold down the Command and Option keys on the keyboard which is the suggested solution to then open a suggested solution to rebuild the library,  but it does not work.  iPhoto still does not open.  can someone please help?
    thank you

    Try the following:
    1 - delete the iPhoto preference file, com.apple.iPhoto.plist, that resides in your
        Home/Library/ Preferences folder.
    2 - delete iPhoto's cache folder(s):
    Home/Library/Containers/com.apple.iPhoto
    and, if there is one, the
    Home/Library/Caches/com.apple.iPhoto folder
    3 - reboot, launch iPhoto and try again.
    NOTE: For Mavericks, 10.9,  go to your Home folder and use the View ➙ Show View Options menu to bring the this window:
    Happy Holidays

  • I have an envy all in one, how do i flip the image to print on a transfer.

    Trying to print on a t-shirt transfer and i need to flip the image.  I don't seem to find the right setting.

    Hi,
    Normally you can flip from application(s) before send to the printer. Please also check this:
       http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&dlc=en&docname=bpu02032&lc=en&product=61561
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • I have a 7510 all in one fax and can't get it on line. Can you help?

    I can't get my 7510 on line to enable fax. I tried logging ing with the fax number and pin but can't get it to work.

    Hey Mhlogging,
    Thank you for your question! I understand you're having a hard time setting up your fax. If eFax is having a hard time verifying your PIN and eFax number, try logging into into your eFax account (www.efax.com) and review your account information. It's possible that the account information is not verified on the printer. 
    If you continue to have problems, please let me know. Otherwise, feel free to mark the solution as solved.
    Thanks!
    I am an HP employee.

  • I have itunes 10.5.2 or whatever the newest one is. A few days ago my itunes says its not working im getting really upset i tried unistalling and reinstalling. please if anyone can help me id greatly appreciate it im tired of not using my itunes. please 3

    please help
    me

    If you want/need help, help yourself by posting the exact error message or specific details of the issue.  Alternatively, search the forums for the error or issue, it's probably been discussed before.

  • I have OS X version 10.9.2 and I updated Adobe Reader but now it does not work.

    I have tried to uninstall and reinstall but it cant even finish doing that. HELP. I need it back working ASAP
    This is the message I get: "Before viewing PDF documents in this browser you must launch Adobe Reader and accept the End User License Agreement, then Quit and relaunch the browser"

    Have you done what the message told you to do?
    Go to your applications, find Reader, open it, agee to the EULA.

  • I have a C4240 All-In-One printer and i am getting an error message Carriage Jam. i hardly use the

    I have a C4240 All-in-One printer and am getting an error message on the display panel "carriage Jam".  I have not given this printer any kind of abuse.  I do leave it turned on but hardly ever print to it.  I have replace the cartridges probably twice since i have owned it.  Can you help me out  as to what I should do with the printer

    Can't really help with your Internet issues, but I can put you on the path to leaning more about Macs.
    If you're a former Windows user, there many resources on Apple's web site to get yourself familiar with how Macs and OS X work.
    Here ard a few areas to spend time with
    http://www.apple.com/support/macbasics/
    http://www.apple.com/support/imac/intel/
    http://support.apple.com/videos/
    http://www.apple.com/support/lion/
    http://www.apple.com/support/osx/
    For the video tutorials, in the video search box, just type in OS X. You'll get a list of OS X video tutorials to watch  as you learn to use your iMac.
    Start with the Anatomy of a Mac video first, Then the Finder Basics video second. After you have watched and put to use these two videos, you can watch any other OS X video you want in any order.
    Here is a free eBook download of David Pogue's OS X Snow Leopard The Missing Manual here. While OS X 10.7 LIon and OS X 10.8 Mountain Lion work a bit differently than OS X 10.6 Snow Leopard, there are many things that still apply.
    http://it-ebooks.info/book/337/
    Good Luck!

  • I have HP J3640 all in one. The printer is printing extremely slow

    I have HP J3640 all in one.  The printer is printing extremely slow.

    Hi,
    Please use the following instructions to check and fix:
      http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01080660&cc=us&dlc=en&lc=en&jumpid=reg_R1002_US...
    I would check ink level first and reseat (not reset) the cartridges.
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • I have the f4500 all in one printer need to know how to mirror my image

    i have the f4500 all in one printer need to know how to mirror the image in easy terms

    Hi bbfoot,
    If you are having issues setting up your HP printer on your Mavericks machine, you may find the following article helpful:
    OS X Mavericks: Solve printing problems
    http://support.apple.com/kb/PH14142
    Regards,
    - Brenden

  • Hi I have a Lexmark all in one printer how do I get it to work with my ipad mini

    Hi I have a Lexmark all in one printer how do I  get it to work  with my  mini ipad

    It depends upon the model. It's wifi-enabled ? And is it listed on this page as supporting AirPrint : http://support.apple.com/kb/HT4356 ?
    If not then do Lexmark have their own app in your country's store that supports that model ? If they don't then there are a number of third-party printer apps such as Print n Share and PrintCentral Pro which might work with it.

  • Have Photosmart Premium All-in-one, model c309a. Will not print a test page as the default printer.

    Have gone through all diagnostics offered online by HP, but to no avail.  Am hooked up wirelessly and all connections say OK.  The print queue just keeps building up until i clear it.  Have checked ink cartridges, power reset procedure and also the Embedded Web server, print driver and port,verified that is not paused or offline, restarted the print spooler, checked the software program and removed and reinstalled the HP software.  It just will not print.  Will copy but not print.  Help!!

    I have exactly the same problem here.
    The printer is connected wirelessly to my router, which is connected with cable to my WinXP computer.
    I can see the web server, all pages report everything is normal and ready. 
    I can ping from my computer to the printer.
    I had no success getting the HP software on the CD to install, but the ~ 200 MB download version installed at least. However when the software probes to see what printers are available, it just doesn't see the printer (even though I can access its web server).
    I finally got my wife's computer (Win 7 64 bit) to connect, but don't know exactly what I did to make that happen.
    I noted that HP has a new version of firmware for the printer, so that will be tomorrow's project.

  • I have hp laptop dv9009us one day all the USB ports and webcam camera stopped working

    I have hp laptop dv9009us one day all the USB ports and webcam camera stopped working, I had windows XP and tried all solutions posted on online forums didn’t work, I upgraded to windows 7 and still not working, please note that the USB is detected in device manger and it says working properly but he webcam is not detected at all, also when I connect any device to USB it gives it power and I even can charge my cell phone but it doesn’t detect any device. Is there any genius out there that can help me?
    Also after I installed windows 7 I went o system information----software environment--- system drivers, and I found all USB drivers stopped by the way this was the case in windows XP as well
    usbccgp            Microsoft USB Generic Parent Driver   c:\windows\system32\drivers\usbccgp.sys         Kernel Driver   No            Manual Stopped           OK      Normal No       No
    usbcir   eHome Infrared Receiver (USBCIR)    c:\windows\system32\drivers\usbcir.sys Kernel Driver   No       Manual            Stopped           OK      Normal No       No
    usbehci Microsoft USB 2.0 Enhanced Host Controller Miniport Driver  c:\windows\system32\drivers\usbehci.sys            Kernel Driver   No       Manual Stopped           OK      Normal No       No
    usbfilter            AMD USB Filter Driver           c:\windows\system32\drivers\usbfilter.sys          Kernel Driver   No            Manual Stopped           OK      Normal No       No
    usbfltr   Razer Copperhead Driver         c:\windows\system32\drivers\copperhd.sys       Kernel Driver   No       Manual            Stopped           OK      Ignore  No       No
    usbhub Microsoft USB Standard Hub Driver    c:\windows\system32\drivers\usbhub.sys           Kernel Driver   No            Manual Stopped           OK      Normal No       No
    usbohci Microsoft USB Open Host Controller Miniport Driver  c:\windows\system32\drivers\usbohci.sys          Kernel Driver   No       Manual Stopped           OK      Normal No       No
    usbprint            Microsoft USB PRINTER Class           c:\windows\system32\drivers\usbprint.sys          Kernel Driver   No            Manual Stopped           OK      Normal No       No
    usbstor USB Mass Storage Driver        c:\windows\system32\drivers\usbstor.sys           Kernel Driver   No       Manual            Stopped           OK      Normal No       No
    usbuhci Microsoft USB Universal Host Controller Miniport Driver         c:\windows\system32\drivers\usbuhci.sys            Kernel Driver   No       Manual Stopped           OK      Normal No       No
    uwbusb            UWB Bus Control USB-Miniport Driver          c:\windows\system32\drivers\usbuwbmini.sys    Kernel Driver   No       Manual Stopped           OK      Normal No       No

    Did you ever get this resolved? I am having the same problem and have tried just about everything for my dv9000.

Maybe you are looking for

  • What's new in the next version of Premiere Pro?  Check it out!

    Here's some of what's coming up in the next version of Premiere Pro and AE.  Can't want to play with this! http://wwwimages.adobe.com/www.adobe.com/content/dam/Adobe/en/products/creativecloud/cc/pd fs/nab2014-reveal-whats-new-for-pre-release-20140321

  • Unable to select IS from the drop down list in message mapping

    Hi, i  know that we can monitor 'Integration server' in message monitoring rather than choosing integration engine or adapter engine. But in our existing land scapes i am unable to select IS from the drop down list in message mapping. using PI 7.1 SP

  • Doubt regarding Multiple recervers without using BPM

    Hi Experts, Our  RFC<->XI<->SOAP asynchronous scenario is working fine,  in this case RFC is sender, SOAP is Receiver,  i want to send some fields form the response of SOAP to be send it as mail using Mail adapter. My existing asynchronous scenario i

  • Iphone doesnt sync with Itunes correctly

    Need seriously help. My new Iphone 5S does not sync with Itunes correctly. All movies i bought won´t get on the Iphone,altough i´ve acitvated all the sync options in itunes. Music Sync ist activated, Movie Sync and Pic Sync also is correctly activate

  • Wierd menu option in itunes 7.1.1 preferences

    i have a checkbox under my itunes general preferences that says "motheroad's **** sounds". also above that the "show links to the itunes store" checkbox has a long space between "links" and "to". i am running itunes 7.1.1 (5). my hard drive is named