I have a huge amount of "documents & data" in memory after I synced. What is this?

What makes up the "documents & data" part on my phone memory?

This phone is not using the cloud. The usage shows messages is using the biggest chunk. I have delegated all messages, but it is still there.

Similar Messages

I have 5.22 Gb of other data on my iPhone 5. What is this?

Hi
I have a 16GB iphone 5. Currently it shows 5.22 Gb of other data. If I look at the usage stats on the phone it totals about 3gb? How do I get rid of this 'other ' data or is this the OS???
Cheers

The "other" data normally includes the iOS, messages, email, and app data, and usually doesn't exceed 1-2 GB unless you have many tens of thousands of messages or lots of photos and videos attached to those messages.
Over-sized "other" often contains corrupted data or metadata and can be removed by restoring the phone with iTunes, first also restoring a backup but usually requires restoring as new, without restoring a backup (the backup usually contains the corrupted data).
Use iTunes to restore your iOS device to factory settings

I have a huge amount of my memory used by 'other' than photos and music - to my knowledge, there is nothing there apart from a few songs and photos and 5 podcasts. What could it be? How could I get rid of this 'other' stuff and get the memory back?

I have a huge amount of my memory used by 'other' than photos and music - to my knowledge, there is nothing there apart from a few songs and photos and 5 podcasts. What could it be? How could I get rid of this 'other' stuff and get the memory back?

See -> What is "Other" and what can I do about it? by Kappy.
Clinton

I have a dollar amount balance on my itunes account... can i use this to purchase apps for my MacBook Pro?

I have a dollar amount balance on my itunes account... can i use this to purchase apps for my MacBook Pro?

You should be able to. As long as you are signed in to the same AppleID that has an available balance. The services are linked.

Have 18g of other on 3gs after ios5 update. what is this and how do you get rid of it?

have 18g of other on 3gs after ios5 update. what is this and how do you get rid of it?

\Based on other forum users' posts, it seems like all you need to do is Restore the phone from your latest backup, and that should "refresh" your phone's appraisal of its data storage.

I have an error message ox61011bed on my hp photosmart plus b209a-m. what does this mean?

i have an error message ox61011bed on my hp photosmart plus b209a-m. what does this mean?
The printer was working fine last night but this morning does not want to print.

Please try turning your printer Off ant then On,
If the power button is not responding, remove and replug the power cord.
The ox61011bed error code indicates a carriage stall error, if the same error appears after power cycling your device, follow the steps provided below:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01768897&cc=us&dlc=en&lc=en&product=3777182&tmp...
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

I have frequent instances of my Macbook Pro beeping 3 times and then I have to forcefully shut it down by pressing the power button. What is this all about? Please help. Thank you.

I have frequent instances of my Macbook Pro beeping 3 times and then I have to forcefully shut it down by pressing the power button. What is this all about? Please help. Thank you.
I saw this report being sent to Apple:
Interval Since Last Panic Report: 581719 sec
Panics Since Last Report: 10
Anonymous UUID: F4CF708D-D85C-4EC5-8047-4FC22C6B03AF
Fri Mar 7 13:00:14 2014
panic(cpu 0 caller 0xffffff80002d1208): Kernel trap at 0xffffff800020c590, type 14=page fault, registers:
CR0: 0x0000000080010033, CR2: 0x0000000000000000, CR3: 0x0000000007541000, CR4: 0x0000000000040660
RAX: 0xffffff8000000000, RBX: 0xffffff800d35a870, RCX: 0xffffff800cf55cd8, RDX: 0xffffff80008a8fcc
RSP: 0xffffff805e5f3d60, RBP: 0xffffff805e5f3da0, RSI: 0x000000001dcd6500, RDI: 0xffffff800d168778
R8: 0x0000000000000001, R9: 0xffffff805e5f3e88, R10: 0x0000000000000011, R11: 0x0000000000000000
R12: 0x0000000000000000, R13: 0xffffff800d168770, R14: 0xffffff800d168778, R15: 0x0000000000000000
RFL: 0x0000000000010082, RIP: 0xffffff800020c590, CS: 0x0000000000000008, SS: 0x0000000000000010
Error code: 0x0000000000000000
Backtrace (CPU 0), Frame : Return Address
0xffffff805e5f3a00 : 0xffffff8000204d15
0xffffff805e5f3b00 : 0xffffff80002d1208
0xffffff805e5f3c50 :
Model: MacBookPro8,1, BootROM MBP81.0047.B27, 2 processors, Intel Core i5, 2.3 GHz, 4 GB, SMC 1.68f99
Graphics: Intel HD Graphics 3000, Intel HD Graphics 3000, Built-In, 384 MB
Memory Module: global_name
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0xD6), Broadcom BCM43xx 1.0 5.100.198.104.5)
Bluetooth: Version 2.4.5f3, 2 service, 12 devices, 1 incoming serial ports
Serial ATA Device: Hitachi HTS545032B9A302, 298.09 GB
Serial ATA Device: OPTIARC DVD RW AD-5970H
USB Device: FaceTime HD Camera (Built-in), 0x05ac (Apple Inc.), 0x8509, 0xfa200000 / 3
USB Device: Hub, 0x0424 (SMSC), 0x2513, 0xfa100000 / 2
USB Device: BRCM2070 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0xfa110000 / 5
USB Device: Bluetooth USB Host Controller, 0x05ac (Apple Inc.), 0x821a, 0xfa113000 / 8
USB Device: Apple Internal Keyboard / Trackpad, 0x05ac (Apple Inc.), 0x0245, 0xfa120000 / 4
USB Device: Hub, 0x0424 (SMSC), 0x2513, 0xfd100000 / 2
USB Device: IR Receiver, 0x05ac (Apple Inc.), 0x8242, 0xfd110000 / 3

Hmm. The problem still may be the RAM - Apple buys the RAM it puts in its machines from third-party vendors (usually Hynix) so it could be a RAM problem.
There are a couple of things that you can do yourself before taking your machine into an Apple Store or an AASP... download and run an application named Rember that will run a RAM test for you - let it run for a couple of hours or even overnight. If it turns out that your RAM is faulty, Rember will let you know. If it is faulty, then you have a couple of options - replace the RAM yourself or (particularly if you're under warranty still) take the machine to an Apple Store or AASP and have them replace the RAM.
If Rember finds no fault with the RAM, then you'll need to take it into an Apple Store/AASP and get a free diagnosis on the machine. Three beeps do usually indicate faulty RAM, but if it tests good with Rember you likely have another problem - it could be something as simple as the RAM, somehow, not seated correctly or signs of another hardware problem.
Run Rember first... call back with results.
Good luck,
Clinton

HT3228 I have one of the origin iPads. Suddenly when I receive an email only the headings are shown - the body of the text is blank. Also previously received emails have also had the text body removed. Any suggestions as to what caused this?

I have one of the original iPads. Suddenly (from yesterday) when I receive an email only the headings are shown - the body of the text is blank. Also previously received emails have also had the text body removed. Any suggestions as to what caused this?

Try this.
Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.

I have a small apple watermark over my mail icon on my dashboard, what does this mean?

I have a small apple watermark over my mail icon on my dashboard, what does this mean?

Hello From Cupertino CA

Calendar app in iPhone use relatively huge amount of cellular data

I'm using a 500MB plan, so my cellular data is very limited. Each month I will check which app on my iPhone used most of the cellular usage, and the built-in Calendar always used the highest amount of cellular data.
I already set the Calendar to sync to "Events 2 Weeks Back" only, and I installed Sunrise calendar and only use it to create new task, edit task, etc. So far Sunrise calendar is the only calendar app that directly access my iCloud calendar. So I can make a comparsion between the two.
I reset the cellular statistics a week ago. Today, the usage of Calendar and Sunrise are as follows:
Calendar: 23.9 MB
Sunrise: 581 KB
They are displaying the same amount of information, the only difference I think is Calendar use Push to keep updating itself, so it consumes this relatively huge amount of data. (>90MB each month!)
I tried disable the cellular usage of Calendar in the past, but then I cannot see the most up-to-date information in the Notification Center. So at last I have to re-enable it again.
Does anyone have similar problem? Is there any solution? Thank you!!!

Hi Robert,
Thank you for the comments but I somehow think we are miscommunicating.
1) I have no problem backing up the phone locally (or to icloud if I wanted to)
2) I have no problem turning on or off cellular data usage for any app on the phone
3) I have no problem seeing what apps are enabled or how much cellular data they use
My problem is the following
APPLE's Notes app used 2.7 GIGABYTES of cellular data (before I disabled cellular data for this app) despite the fact I wasn't even using the app. I didn't change any setting for Notes, I didn't do anything with it except create one note on October 15. It would seem to me that this excessive usage is a bug or oversight in Apple's design of the app.
The purpose of this post is to warn others of the potential issue and to see if this issue has been observed by anyone else and if there are any actual fixes. Disabling cellular data for the app is a work-around ... but will the problem begin again if cellular data is re-enabled?
Your suggestion of erasing all content and settings and then restoring the phone from the backup sounds extreme but would it solve the specific problem of excessive cellular data usage and if so .. why?

Open items yet to be cleared which have 2-3 years old document date

Sap Experts,
This is my first post and would like to ask for a help .
I would like to clear all the open items which have Zero balance and belongs to Fiscal year 2007, 2008, 2009, 2010.
In F-04 T.code, When I put the document date, it does not allow me to clear it.
Please give me the best solution you think of any other alternative which is right or please provide me with steps to clear by using F-04
Your help will be greatly appreciated.
Kind regards
LSD

Thanks Atif & Sanil for your quick reply,
But the problem is when I enter the GL account, it is giving me error, stating that "there are no open items managed in Account XXXXXXXXXX". I have checked the control data in FS00 and only Line item Display is ticked.
I have recently joined this place, and the items are open from the day SAP was implemented. So they do not use Auto clearing.
Some points I am thinking below,
Q1. Does it mean that the control data must have open item to be "ticked"?
Q2. The A/c i am trying to clear is Non-current Trade receivables, so can we clear such accounts.
In terms of Clearing the data from 2007 till date,
Q3. Do I have to open the old periods or can I clear in current period.
Further info will be very helpful.
Cheers

I have a large amount of "Other" data on my iPhone 5 after the last 2 updates. Why and how do I get rid of it?

After I sync my phone, it has a large amount of data under the category-"other". About 11gigs. This is an issue. Does anyone know why and how I can delete it? I think it's from iMessage, email, etc..., but I have deleted lots of it with no result.

You might look at PhoneClean
<http://www.imobie.com/phoneclean/download.htm>

Performance: reading huge amount of master data in end routine

In our 7.0 system, each day a full load runs from DSO X to DSO Y in which from six characteristics from DSO X master data is read to about 15 fields in DSO Y contains about 2mln. records, which are all transferred each day. The master data tables all contain between 2mln. and 4mln. records. Before this load starts, DSO Y is emptied. DSO Y is write optimized.
At first, we designed this with the standard "master data reads", but this resulted in load times of 4 hours, because all master data is read with single lookups. We redesigned and fill all master data attributes in the end routine, after fillilng internal tables with the master data values corresponding to the data package:
*   Read 0UCPREMISE into temp table
    SELECT ucpremise ucpremisty ucdele_ind
      FROM /BI0/PUCPREMISE
      INTO CORRESPONDING FIELDS OF TABLE lt_0ucpremise
      FOR ALL ENTRIES IN RESULT_PACKAGE
      WHERE ucpremise EQ RESULT_PACKAGE-ucpremise.
And when we loop over the data package, we write someting like:
    LOOP AT RESULT_PACKAGE ASSIGNING <fs_rp>.
      READ TABLE lt_0ucpremise INTO ls_0ucpremise
        WITH KEY ucpremise = <fs_rp>-ucpremise
        BINARY SEARCH.
      IF sy-subrc EQ 0.
        <fs_rp>-ucpremisty = ls_0ucpremise-ucpremisty.
        <fs_rp>-ucdele_ind = ls_0ucpremise-ucdele_ind.
      ENDIF.
*all other MD reads
ENDLOOP.
So the above statement is repeated for all master data we need to read from. Now this method is quite faster (1,5 hr). But we want to make it faster. We noticed that reading in the master data in the internal tables still takes a long time, and this has to be repeated for each data package. We want to change this. We have now tried a similar method, but now load all master data in internal tables, without filtering on the data package, and we do this only once.
*   Read 0UCPREMISE into temp table
    SELECT ucpremise ucpremisty ucdele_ind
      FROM /BI0/PUCPREMISE
      INTO CORRESPONDING FIELDS OF TABLE lt_0ucpremise.
So when the first data package starts, it fills all master data values, which 95% of them we would need anyway. To accomplish that the following data packages can use the same table and don't need to fill them again, we placed the definition of the internal tables in the global part of the end routine. In the global we also write:
DATA: lv_data_loaded TYPE C LENGTH 1.
And in the method we write:
IF lv_data_loaded IS INITIAL.
lv_0bpartner_loaded = 'X'.
* load all internal tables
lv_data_loaded = 'Y'.
WHILE lv_0bpartner_loaded NE 'Y'.
Call FUNCTION 'ENQUEUE_SLEEP'
EXPORTING
     seconds = 1.
ENDWHILE.
LOOP AT RESULT_PACKAGE
* assign all data
ENDLOOP.
This makes sure that another data package that already started, "sleeps" until the first data package is done with filling the internal tables.
Well this all seems to work: it takes now 10 minutes to load everything to DSO Y. But I'm wondering if I'm missing anything. The system seems to work fine loading all these records in internal tables. But any improvements or critic remarks are very welcome.

This is a great question, and you've clearly done a good job of investigating this, but there are some additional things you should look at and perhaps a few things you have missed.
Zephania Wilder wrote:
At first, we designed this with the standard "master data reads", but this resulted in load times of 4 hours, because all master data is read with single lookups.
This is not accurate. After SP14, BW does a prefetch and buffers the master data values used in the lookup. Note [1092539|https://service.sap.com/sap/support/notes/1092539] discusses this in detail. The important thing, and most likely the reason you are probably seeing individual master data lookups on the DB, is that you must manually maintain the MD_LOOKUP_MAX_BUFFER_SIZE parameter to be larger than the number of lines of master data (from all characteristics used in lookups) that will be read. If you are seeing one select statement per line, then something is going wrong.
You might want to go back and test with master data lookups using this setting and see how fast it goes. If memory serves, the BW master data lookup uses an approach very similar to your second example (1,5 hrs), though I think that it first loops through the source package and extracts the lists of required master data keys, which is probably faster than your statement "FOR ALL ENTRIES IN RESULT_PACKAGE" if RESULT_PACKAGE contains very many duplicate keys.
I'm guessing you'll get down to at least the 1,5 hrs that you saw in your second example, but it is possible that it will get down quite a bit further.
Zephania Wilder wrote:
This makes sure that another data package that already started, "sleeps" until the first data package is done with filling the internal tables.
This sleeping approach is not necessary as only one data package will be running at a time in any given process. I believe that the "global" internal table is not be shared between parallel processes, so if your DTP is running with three parallel processes, then this table will just get filled three times. Within a process, all data packages are processed serially, so all you need to do is check whether or not it has already been filled. Or are you are doing something additional to export the filled lookup table into a shared memory location?
Actually, you have your global data defined with the statement "DATA: lv_data_loaded TYPE C LENGTH 1.". I'm not completely sure, but I don't think that this data will persist from one data package to the next. Data defined in the global section using "DATA" is global to the package start, end, and field routines, but I believe it is discarded between packages. I think you need to use "CLASS-DATA: lv_data_loaded TYPE C LENGTH 1." to get the variables to persist between packages. Have you checked in the debugger that you are really only filling the table once per request and not once per package in your current setup? << This is incorrect - see next posting for correction.
Otherwise the third approach is fine as long as you are comfortable managing your process memory allocations and you know the maximum size that your master data tables can have. On the other hand, if your master data tables grow regularly, then you are eventually going to run out of memory and start seeing dumps.
Hopefully that helps out a little bit. This was a great question. If I'm off-base with my assumptions above and you can provide more information, I would be really interested in looking at it further.
Edited by: Ethan Jewett on Feb 13, 2011 1:47 PM

Date & Time Wrong after iTunes Sync

I could swear I saw something about this in a thread, but couldn't find it after searching.
I don't recall this happening before today (might have and I just didn't notice) but when I sync with iTunes now, it changes the date and time on the touch to some date/time in 2005.

Happened again tonight. Each time I pulled the USB and reconnected, it synced to a different date and time. What appeared to work (although this is based on a sample size of 1) was to exit iTunes, then disconnect/reconnect the touch, then relaunch iTunes. Date/Time corrected on subsequent sync.

I have an iphone and have a 1 in a red circle on my photos app. What does this mean?

I have a 1 in a red circle over my photos icon on my iphone. What does this mean?

FAQ apple id http://support.apple.com/kb/HT5622?viewlocale=en_US
http://support.apple.com/kb/HT1311

I have a huge amount of "documents & data" in memory after I synced. What is this?

Similar Messages

Maybe you are looking for