I have a internet problem- after updating to v.40 ...

hello guys,
yesterday i update my phone to version 40, and i have a critical problem..
when i open an application or "opera mini" for example, it doesnt ask for internet connections (WIFI, WAP, 3G INTERNET). in version 30,31 it was automatic ask me. i dont know what to do, cause all the applications with internet doesnt work for me,
*when i have a WIFI connection in the erea, its automatic connecting to this one.
whats weird? with the original explorer on the phone- it works! all is fine, no problems.
i didnt change any settings at all, i tried to reinstall things same in C device and i have this problem too, so i dont thing its a problem of the memory card.
i need help, its importent for me..
sorry for the poor english.
good day !

Goto-- Settings-- Connectivity-- Destinations--- remove default & set default as Always Ask option..
-Sam
Hit Kudos to show your appreciation.

Similar Messages

Yet another internet problem after updating to Leopard

After 3 attempts, I've finally got Leopard installed on my Macbook Pro (just over 18 months old, was running Tiger perfectly well) and i STILL can't get internet access.
The Airport says its connected but nothing loads at all - it won't send/receive messages, it won't load webpages, it just sits there doing nothing until eventually (often after half an hour or more) it'll tell me that the connection has timed out.
I've done the following changes as suggested elsewhere on the internet -
1. Changed IPv4 settings to manual and doublechecked these are correct - they weren't the first time round, it was inventing phantom numbers and confusing my router for the actual interwebs. So changed that.
2. Turned IPv6 to Off on both airport and ethernet
3. corrected DNS entries for the Airport - again left to its own devices it thinks the router's IP address is the DNS address. So I added the correct 2 plus the two from Open DNS for good measure. I've tried different combinations of all 4, only the router two, only the open DNS 2 and so on and so forth and it still won't work!
4. tried restarting several times after each change.
5. double checked i don't have any of the .plist files from Tiger that might be interfering.
6. checked for a trojan horse
7. checked my router is working (it is).
And, nothing worked. It's still rubbish and does nothing. I wish I had never spent the money on the stupid upgrade and am never going to do it again!
Can anyone help?!
I've got 10.5.4 and then I patched it with the 10.5.5 Combo update too. I went for an Erase and Install option too. I'm not the most mac savvy person around, so please be gentle!
TIA.

I've checked, double checked, triple checked, tested, quadruple checked... My router is working perfectly, it works with my blackberry, friends laptops, my PC... just not my Mac. All the addresses are correct - left to its own devices the laptop with Leopard on it will NOT use the correct info for the DHCP or any other address. It uses incorrect information, confusing the Router itself with the actual internet (basically all the address fields that are meant to point you at, like, "the internet" will instead just point you to the router and the router of course replies with Hey man, whaddya want? I'm just a router... so nothing happens). Changing that gave me some internet access where previously it wasn't getting any. But all webpages take forever to load - often not loading at all - and after about 10 minutes of occasionally working the whole thing will pack up.
I flat out refuse to fork out £300 for a new router just because Apple decided to make their new OS incompatible with anything but Time Capsule (as I suspect is probably the case given loads of people are having the same problems and there's been a noticeable silence on the subject from Apple). So I guess I'll be wiping the macbook AGAIN and reinstalling Tiger from the recovery disc.
Next computer - back to a windows PC! I'm sure Microsoft are loving Leopard.

Apple cinema Display problem after update

I had a similar problem to lain Maclreud
Immediately after updating to 10.4.11 and rebooting the toparea on my cinema display went dim and I saw the 2 short, one lon blinks on my power display LED
I didn't try it on another computer yet or try to change my power source but I may need a new backlight card as well. Please post if you have had similar problems after updating and suggest possible solutions.

Have you tried the Command-Option-P-R keys to reset the PRAM? (Maybe the upgrade has messed up the display settings?)
http://docs.info.apple.com/article.html?artnum=2238

My itunes opens after 2-3 hrs after doubleclicking it to open;it happened once or twice with itunes 11.x , but its a constant problem after updating itunes to 12.x ....my operating system win7;processor i5 intel haswell and 4gb ram...i hav no issue

My itunes opens 2-3 hrs after doubleclicking it to open;it happened once or twice with itunes 11.x , but its a constant problem after updating itunes to the latest 12.0.1....my operating system windows7;processor i5 intel haswell and 4gb ram...i have no issue with opening other big programs....i tried uninstalling completely the itunes and reinstalling it as i thought at first it is not opening (because it takes really long time) and i followed the following support pages
1)iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
2)iTunes for Windows doesn't open after upgrading in Windows Vista, Windows 7, or Windows 8
but my problem doesnot get solved even after trying all the methods in the above pages...
now i realized,it opens after 2-3 hrs and at will...after opening it keeps hanging.finally it doesnot again open immediately after closing...kindly help me out as soon as possible

My itunes opens 2-3 hrs after doubleclicking it to open;it happened once or twice with itunes 11.x , but its a constant problem after updating itunes to the latest 12.0.1....my operating system windows7;processor i5 intel haswell and 4gb ram...i have no issue with opening other big programs....i tried uninstalling completely the itunes and reinstalling it as i thought at first it is not opening (because it takes really long time) and i followed the following support pages
1)iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
2)iTunes for Windows doesn't open after upgrading in Windows Vista, Windows 7, or Windows 8
but my problem doesnot get solved even after trying all the methods in the above pages...
now i realized,it opens after 2-3 hrs and at will...after opening it keeps hanging.finally it doesnot again open immediately after closing...kindly help me out as soon as possible

I have a problem after update version 6.0.1, the call not smoothly. how is your ideas?

i have a problem after update version 6.0.1, the call not smoothly. how is your ideas?

Hi all
Like to share that my AV Adapter problem is solved ... brought it to Apple Service Center as a last resort after the new iOS v5.1 did not solve mine like some others have theirs solved.
In fact, the Apple Service Center tried my AV Adapter and find that it does not work with their iphone and ipad too and flagged for a replacement.
Just this week collected the replacement and tested that the replaced adapter works !
So this "unsupported device" error msg could also be due to faulty adapter .... although it is unbelievable that a "simple" wired connector could so easily breakdown after 1 time use ! I never did believe that it can be broken so easily as we hardly used it after the first testing with our TV on HDMI.
Closing this chapter of mine finally.

HT201210 I have 4s facing hang problem after updating when i dicline the call the keypad geting locked ,touch stop working unable to unlock the phone .then what i can do i restart the phone with pressing home key & power key together then i am able to ace

I have 4s with 16GB storage capacity using IOS 7.1.2.
Facing hang problem after updating when i decline the call the keypad getting locked ,touch stop working unable to unlock the phone .
Then what i can do i restart the phone with pressing home key & power key together then i am able to access it.
Kindly resolve the issue as soon as possible
Ashish
[email protected]

Did you already try to set it up as a new device, as explained in this article?
iOS: How to back up your data and set up your device as a new device

White screen problem after updating to 1.1 firmware

My 2G iPod Nano worked fine with 1.0.1 and 1.0.2 firmware but after updating to 1.1 I get white screen everytime I turn it on after longer period of time. Turning the iPod off and then right back on makes it work again. I have done restore 3 times without effect. I even removed the firmware files so that iTunes downloads them again when doing the restore but that didn't work either.
Should I return it or wait for new firmware? Has anyone else had this problem after updating to 1.1?

Disconnect iPod and close iTunes.
Firmware files are in "Documents and Settings\username\Application Data\Apple Computer\iTunes\iPod Software Updates" folder.
You should still have the 1.0.2 files named "iPod_19.1.0.2.ipsw" and "iPod_19.1.0.2.ipsw.signature" in there if have you upgraded from 1.0.1 version.
Remove 1.1 files from the folder so that only those to files are in there.
Disconnect from network (I switched off my wlan) so that iTunes can't download the new version. Connect your iPod and do Restore, iTunes will now use the old firmware files because it can't connect to the internet.
Fujitsu Siemens Amilo M3438G Windows XP

Photoshop CS2 problems after updating to 10.4.5.?

Anybody notice Photoshop CS problems after updating to 10.4.5.?

Hello I had the same problem
I found the following information that helped me.....
Program errors occur when software conflicts arise due to an updated operating system. You can resolve these errors when you also update the driver software that causes the conflict or when you update the operating system. Program errors can also occur because of a damaged Photoshop preference file, or if there is a problem with a phone or internet connection. The Apple Disk Utility fixes file system errors that can also cause program errors.
Error "Could not complete your request..." or "Could not create a new document..." (Photoshop CS2 on Mac OS X v10.4)
Issue
Adobe Photoshop CS2 returns one of the following error messages:
"Could not complete your request because of a program error" when you try to open a file.
"Could not create a new document because of a program error" when you try to create a new file.
Solution 1:
Install the most recent update to Mac OS.
Solution 2:
Re-create your preferences files.
1. Hold CommandOptionShift when you start Photoshop.
2. Click Yes to the message, "Delete the Adobe Photoshop Settings file?"
Solution 3:
Disconnect your Internet connection.
To disconnect your Internet connection, do one of the following:
If you are connected to the Internet via a telephone modem, then disconnect from the modem.
If you are connected to the Internet via cable modem or DSL, then disconnect the ethernet cable from your computer.
Solution 4:
Use a disk repair utility.
Restart your Mac in Single User mode and run fsck -fy . For more information about the fsck command, please visit the Apple website at http:/docs.info.apple.comarticle.html?artnum=106214 .
Solution 5:
Ensure that all your drivers are compatible with Mac OS X v10.4.
Determine if your printer and video card (and any other peripherals you might have) are compatible with Mac OS X v10.4, and visit the manufacturers' websites to update the drivers.
Solution 6:
Re-create your printers in Mac OS X.
To re-create your printers, first delete them and then add them again.
To delete your printers:
1. Open System Preferences from the Apple menu.
2. Select Print & Fax, and click Printing.
3. Select each printer in the list and click the delete key (the minus key).
For instructions on how to add your printers again, see "Setting up to print to a printer" in Mac Help or search Help using the phrase "add a printer."
The one that fixed it for me was solution 6 -- re-creating my printers
I don't know why but it could be worth a try
Good luck
ADAM
17" Powerbook G3 iMac Mac OS X (10.4.3)
17" Powerbook G3 iMac Mac OS X (10.4.3)
17" Powerbook + G3 iMac Mac OS X (10.4.5)

Problems after updating from Mavericks to Yosemite.

Hello everyone.I have noticed some battery problems after updating from Mavericks to Yosemite like no charging at all (but the orange led was on )and not able to fully charged.I solve them with SMC reset and PRAM reset.Furthermore, battery discharges faster than before and its really annoying.Now I have notice that the upper right corner of my mac is getting hot.I'll appreciate any help
MacBook Pro (Retina, 13-inch, Late 2013

Try these in order testing your system after each to see if it's back to normal:
1. a. Resetting your Mac's PRAM and NVRAM
    b. Intel-based Macs: Resetting the System Management Controller (SMC)
2. Restart the computer in Safe Mode, then restart again, normally. If this doesn't help, then:
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the Utilities menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
3. Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the Utilities menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu. Select Restart from the Apple menu.
4. Reinstall Yosemite: Reboot from the Recovery HD. Select Reinstall OS X from the Utilities menu, and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible
            because it is three times faster than wireless.
5. Reinstall Yosemite from Scratch:
Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
How to Clean Install OS X Yosemite
Note: You will need an active Internet connection. I suggest using Ethernet if possible
            because it is three times faster than wireless.

Iphone 5 back camera problem after update to IOS 8. Focus doesn't work on back camera!

My device is Iphone 5 64gb IOS 8.
I have problem after update to IOS 8. When i run camera.. I hear some scratch inside my phone. And focus of back camera doesn't work.
1. How can i fix it?
2. Or how to rollback to IOS 7+ ?
3. Should i come to app store with this problem?

I'm having this same problem too. Worked fine prior to iOS update. I contacted Verizon this morning who advised that this is a known issue. They suggested I backup my device, and perform a factory data reset. When prompted to update to iOS 8 again, re-installation has been known to resolve the issue. With all the problems with iOS 8, camera, and overall device slowing, I might just wait for a follow on SW turn.

Hello, I have a big problem after a big bug on my iphone 5

hello, I have a big problem after a big bug on my iphone 5 it asks me to restore only impossible but it gives me error 27, 47, 4013 I do not understand all my iphone is not jailbroken but for some time the screen is full of stripes do all colors and off. Sorry for the mistakes, I m french. Thank you.

Hi there Julienx76,
You may find the troubleshooting steps in the article below helpful.
iTunes: Specific update-and-restore error messages and advanced troubleshooting
http://support.apple.com/kb/ts3694
-Griff W.

What cause searching network problem after updating iphone 6 from iOS 8.1.2 TO iOS 8.1.3?

what cause searching network problem after updating iphone 6 from iOS 8.1.2 TO iOS 8.1.3?

SSince Apple does not support downgrading the iOS I suggest you start a new question that gives a good title to a specific problem. Then in the body of the thread describe the problem in detail, tell us what steps you have tried so far to correct the problem, what happened, and what error messages you received.

HT4623 problem after update

i have iphone 3gs gsm after updating it from 4.3.3 to 6.1.3 give this msg
"your iphone could not activated becuause the activation server is temporarily unavailable".
My iphone is unlocked this is IMEI "012162007569977".
Can u solive the problem?

https://discussions.apple.com/message/21189708#21189708

Anyone has any problem after updating to iSO 4.3.1 ?

anyone has any problem after updating to iSO 4.3.1 ?
I would like to know before updating mine.

My 3G kept freezing after iSO 4.2.. and after reading the forums I updated both my Itunes and software to iOS 4.3.1, now I've lost my notes, contacts, calender entries and so far in the last ten minutes it's turned off and restarted itself and sync'd continually about 5 times.
So basically I'm still where I was before only more cranky. In addition, I live in Australia and there are no Genius places here, there is no support from Apple unless you pay for it even by an email, you basically end up fending for yourself under a supposed warranty that isn't worth the paper its printed on.
It you haven't already guessed, I'm more than a little ****** off.
If I'd known how much trouble this was going to be, I don't think I would have spent the $400 odd dollars to buy it.
If its not right by the weekend I'm taking it back to the shop I bought it.

Microsoft Office 2011 no longer opens because "there is a problem" after updating mountain lion when the app store said there was an update available this morning. Reinstalling did not work. What's the problem?

Microsoft Office 2011 no longer opens because "there is a problem" after updating mountain lion when the app store said there was an update available this morning. Reinstalling did not work. What's the problem?

Has your problem been solved by the updates??
Have a similar problem. This MacBook opened all MS Office programs in Dec2012 but no longer does in Feb2013. Went to Microsoft/mac/downloads but none of the three updates would run citing a problem "version of software needed to run this update was not found on this volume".
MacBook: 7.1, Intel Core 2 Duo, 2.4 GHz
Microsoft Office 2011: version 14.2.3
Mountain Lion: 10.8.2 (12C60)

I have a internet problem- after updating to v.40 ...

Similar Messages

Maybe you are looking for