I have a iPad Keyboard Dock for the iPad 1. I purchase an iPad 2 and the dock worked fine for a week no fit problem none worked. I received a tiny message about  iPad Keyboard Dock it stop working immediately after dismissing message.

I have a iPad Keyboard Dock for the iPad 1. I purchase an iPad 2 and the dock worked fine for a week no fit problem none worked. I received a tiny message about  iPad Keyboard Dock it stop working immediately after dismissing message.

Hi and welcome..
Connect your iPad to your computer. Launch iTunes. Make sure your iPad is recognized in iTunes under Devices on the left.
Select the Summary tab then click Update.
Just to make sure your iPad software is up to date.
Carolyn

Similar Messages

  • HT201412 I have an iPad 2 that just stopped working...no display...won't turn on...tried all steps in above article.

    I have an iPad 2 that just stopped working...no display...won't turn on...tried to sync to iTunes and couldn't because I need to put in my passcode. There is no display, so can't do this. Am dead in the water. Does anyone have ideas to solve this issue?

    Try force iPad into Recovery Mode. Follow step 1 to 6 very closely.
    http://support.apple.com/kb/HT1808
    Note: You may have to repeat the above a few times.

  • HT4623 I updated my ipad to iOS 6 yesterday and it worked immediately after update.  I left home for about 4 hours and when I returned I was uable to get my ipad to come up. I only have a black screen.  When I press the on off button nothing happens.

    I updated my ipad to iOS 6 yesterday and it worked immediately after updating my ipad worked as it should.  I left and came back in about 4 hours and have a black screen.  When I press the on off button nothing happens.  Help.

    Assuming that the battery isn't empty (and it can take up to 15 minutes of charging before it will respond), then have you tried a reset ? Press and hold both the sleep/on/off and home buttons for about 10 to 15 seconds, after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

  • I have had apple products now for apron 7 years BUT have never been able to make the bluetooth work , not even when 2 products i.e. : phone and iPod are in the same room. So i stopped trying but would like to set it up between my iMac and i

    hi can anyone help please ? i have had apple products now for apron 7 years BUT have never been able to make the bluetooth work , not even when 2 products i.e. : phone and iPod are in the same room. So i stopped trying but would like to set it up between my iMac and iphone / ipad but can't get it to work, they say discoverable but just will not connect to one another. I also tried the connection code and tried without one ... NO JOY ... Is this common or am i a twit ?

    You can't connect an iPhone or iPad to a Mac via Bluetooth, except for Internet tethering.
    You're not doing anything wrong - it just isn't a feature of iOS devices.
    What were you hoping a Bluetooth connection would allow you to do?

  • I have 2 apps that have been waiting to update for a week.  I don't really care about the update, I would just like to use them, but the are stuck waiting.  I have tried powering down, syncing with my computer...all fails.  Any ideas?

    I have 2 apps that have been waiting to update for a week.  I don't really care about the update, I would just like to use them, but the are stuck waiting.  I have tried powering down, syncing with my computer...all fails.  Any ideas?

    At this point you have no choice but to update the or delete them and reinstall them since you wont be able to use them until they update - or come out of the "waiting" loop.
    Make sure that you do not have a stalled download in iTunes - a song or podcast .... if you have a download in there that did not finish, complete that one first. Only one thing can download at a time on the iPad so that could be what is causing the problem.
    If that doesn't work - sign out of your account, restart the iPad and then sign in again.
    Settings>Store>Apple ID. Tap your ID and sign out. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
    Go back to Settings>Store>Sign in and then try to update again. Tap one waiting icon only if necessary to start the download stream.
    You can also try deleting the waiting icons - tap and hold down on an icon until it wiggles - the tap the X on the icon to delete it. Then try to download again.
    You can try resetting all settings. Settings>General>Reset>Reset All Settings. You will have to enter all of your app preferences and device settings again.

  • When I pre ordered my iphone 6 i was told I was going to get an additional 1 gig of data per month for a year.  It even shows it on the receipt i received with the phone.  When will I see that reflected on my account.  I have had my new phone for a week a

    When I pre ordered my iphone 6 i was told I was going to get an additional 1 gig of data per month for a year.  It even shows it on the receipt i received with the phone.  When will I see that reflected on my account.  I have had my new phone for a week and used tons more data than usual and am hoping that will save me this month.

    concretedonkey, I'm glad you were able to take advantage of this offer when you ordered your new iPhone 6. I can certainly review your account to ensure this was added for you. Please reply to the direct message I have sent you.
    AndreaS_VZW
    Follow us on Twitter @VZWSupport

  • Since updating to LR5.5 it crashes about every 5-10 images while working in the development module. Computer is PC Windows 7 Home Premium. I have been using this computer for several years with zero problems. Is this related to the updating? What is the f

    Since updating to LR5.5 it crashes about every 5-10 images while working in the development module. Computer is PC Windows 7 Home Premium. I have been using this computer for several years with zero problems. Is this related to the updating? What is the fix?

    Do you get an error message? If so, what does it say?
    Do you get a Blue Screen?
    Does something else happen?

  • My husband made the mistake of "upgrading" to IOS 7 last night.  Now he is receiving every text message that I send or receive.  How do I make this stop?

    My husband made the mistake of "upgrading" to IOS 7 last night.  Now he is receiving every text message that I send or receive.  How do I make this stop.  We have always shared the same Apple ID in the past and never had any problems.  I've seen posts where they say to create separate Apple ID's, but that means that whichever one of us does that, is gonna lose access to everything that is in our current ITunes account, correct? 

    My husband made the mistake of "upgrading" to IOS 7 last night.  Now he is receiving every text message that I send or receive.  How do I make this stop.  We have always shared the same Apple ID in the past and never had any problems.  I've seen posts where they say to create separate Apple ID's, but that means that whichever one of us does that, is gonna lose access to everything that is in our current ITunes account, correct? 

  • CC 2014 nik efex - My Nik Efex filters are not working in Photoshop CC 2014 - they appear under plug-ins and seem to work, but after running and clicking okay, no new layer appears - seems to have no effect.  The separate menu panel does not appear either

    My Nik Efex filters are not working in Photoshop CC 2014 - they appear under plug-ins and seem to work, but after running and clicking okay, no new layer appears - seems to have no effect.  The separate menu panel does not appear either.  Help with this?

    BINGO !!!!
    Thanks so much Woodsroad. I had the exact same problem with my Dell Windows 7 64 bit with AMD Radeon 6700 Video card.
    All the video tests passed with flying colors.
    The sniffer rename trick fixed the problem.
    Thank goodness for the internet!

  • I have had an EE account for 3 weeks now and still can't text or receive calls

    I have had an EE account for 3 weeks now and still can't text or receive calls

    What did your carrier say when you reported the problem to them?
    Who is your carrier? Are they on this list? http://support.apple.com/kb/HT1937?viewlocale=en_US&locale=en_US

  • HT1595 I have 2 Apple TV's one the oldest works fine the 2nd one refuses to recognise the MacBook Pro its connected to but I can play media from the MacBook on the Apple TV from iTunes, help?

    I have 2 Apple TV's one the oldest works fine the 2nd one refuses to recognise the MacBook Pro its connected to but I can play media from the MacBook on the Apple TV from iTunes, help?

    Sorry, content bought with one Apple ID cannot be merged or transferred to another Apple ID.

  • I have windows 7 and my speakers worked then after update my speakers do not work and everything checked out and says they are working and that soundcard is working but no sound now.

    I have windows 7 and my speakers worked then after update my speakers do not work and everything checked out and says they are working and that soundcard is working but no sound now.
    I have tried everything and nothing works.

    sound problems:
    #Restore speaker icon to System Task bar, right-click on clock or tray > Properties > Volume: On
    #Click on the Sound icon in System tray then on Mixer, make sure Firefox is not muted [http://dmcritchie.mvps.org/icons/fx_sound.png picture]
    <p>Additional references
    * [https://support.mozilla.com/en-US/kb/No%20sound%20in%20Firefox No sound in Firefox | Troubleshooting | Firefox Help]
    * [http://support.mozilla.com/en-US/kb/Video%20or%20audio%20does%20not%20play Video or audio does not play | Troubleshooting | Firefox Help]
    * [http://kb.mozillazine.org/Video_or_audio_does_not_play Video or audio does not play - MozillaZine Knowledge Base]

  • ITunes stops responding immediately after opening

    My iTunes stops responding immediately after opening and even force-quit doesn't do.
    Baically it freezes between pressing it and opening the window. In my large library, I can see that it loads it and then nothing more. The menu appears and then the wheel. Force quitting doesn't shut the program, no matter how I do it. It leaves the arrow and the only way is to restart the computer and start again.
    I tried using another account, and it does the same. I tried with a new library. I tried with new prefs folder both on the user and on the Mac HD. I tried reinstalling iTunes. I even tried reinstalling the whole OS X - but nothing. The only thing is that after zapping PRAM it might work once or twice, but no more.
    This is with iTunes 7.0.2, QuickTime 7.1.3 and OS 10.4.8
    I don't know what else to do.
    Any ideas?

    I'm having the same problem. It started recently - maybe about two weeks ago - and occasionally when I launch iTunes it just freezes. I can't force quit it completely - it still shows in the Dock as though it's running, though it's not present in Activity Monitor.
    Curiously, I've also had a couple of kernel panics when clicking iTunes buttons in the past week. I don't recall any system update that might have affected either iTunes or QuickTime, so I'm stumped... The only way to get iTunes back is to log out or restart.
    Kirk

  • I want to turn my macbook air off. the shut down button already appeared but the mouse/cursor just hang and won't work. even after pressing the enter button to shut my mac off won't work. what will i do?

    i want to turn my macbook air off. the shut down button already appeared but the mouse/cursor just hang and won't work. even after pressing the enter button to shut my mac off won't work. what will i do?

    This is not a reply. I just want to elaborate on this problem.
    My computer freezes occasionally when it is used after being sleep for a while. The spinning ball appears and everything is totally disabled. Nothing on the keyboard works.
    The mouse moves, but does not work.
    The only solution is to turn the power off and on (losing all data in open applications.)
    I kept the System monitor running on the side to find out which program was running when the computer froze. The Monitor as well as all other applications froze, but the data showed:
    Firefox 18.4%
    Activity Monitor 0.9%
    Firefox Plugin 0.2%
    This is all the information I have. By the way, I am using iMac with OS 10.6.

  • Error:"non-MTOM endpoint received a MTOM message"

    Hello,
    Appreciate someone could show right points toward below issue:
    Enviornment: Oracle Weblogic Server /portal10.3.0
    1) We are using Invoking a webservice which is sending some binary content in SOAP 1.2 MTOM
    2) On the basis of published wsdl , I built a own Weblogic ServiceControl (com.bea.controls.ServiceControl) class ...
    3) I could print the response from the web service but when the actual message is decoded to response object...i thinks it's failing...
    weblogic.wsee.codec.CodecException: non-MTOM endpoint received a MTOM message"
    at weblogic.wsee.codec.soap11.SoapCodec.decode (SoapCodec.java:170)
    at weblogic.wsee.ws.dispatch.client.CodecHandler.decodeOutput(CodecHandler.java:127)
    Regards

    Can you test back-end MTOM end point through a route node and see if its working? I doubt the issue has nothing to do with SC but with the MTOM end-point implementation.
    non-MTOM endpoint received a MTOM message") error: hints that the service call out is sending a mtom message but the end-point is not accepting the message
    Manoj
    Edited by: mneelapu on Jun 8, 2009 11:25 AM

Maybe you are looking for

  • AppleTV not syncing with Itunes 9.0.1

    Hi there, Since upgrading to Itunes 9 I have had endless bother trying to get ITunes to talk to my AppleTV. I keep getting an error saying that I need to check my firewall settings and when I click on the more info button, it takes me to an Apple hel

  • UserInteraction = NO does not appear to be working for my app

    if I do this: self.view.userInteractionEnabled = NO; [progressView startAnimating]; BOOL status = [call a function here]; [progressView stopAnimating]; self.view.userInteractionEnabled = YES; The progressView does work as expected, but the user can c

  • My uploads to Facebook fail with Unknown Error

    Every attempt to upload my projects to Facebook fail with the message "Error, Unknown Error" message. I have tried projects from 15 down to just 5 minutes. I have tried projects with 6 down to just 1 clip. I have tried wireless and wired connections.

  • IMac PC does not support latest Adobe FP/can't watch Youtube/Only solution=new computer??

    I can no longer watch You Tube because the latest version of Adobe Flash Player will not download to a PPC. I run Tiger 10.4.11 (I know that's ancient but it works very well!) Does this mean the only way to view You Tube would be to buy a new compute

  • SUNIDM Form and JSP

    Hi, How an association is made between a form and a JSP in SUN IDM? eg("Tabbed User form" linked to "account/modify.jsp). Do we always have to attach a form to an existing JSP provided by Sun, or can custom JSPs be built and included in the idm.war?