I have a ipad mini 16GB and i was trying to update it to the latest version of ios7 when it went into recovery mode how do you get it out using a windows 8 computer?
I have a ipad mini 16GB and i was trying to update it to the latest version of ios7 but it went into recovery mode how do i get this recovery mode away without eraseing any data using a windows 8 computer?
Plug it into iTunes and restore it with your backup. You should have a backup in iTunes or iCloud.
http://support.apple.com/kb/HT1414
Similar Messages
-
hey my iphone was having some glitches with it so went into recovery mode and i didnt have my songs backed up becoz i didnt have a computer to hook it up with, but i do now just wondering how can i get my songs back i have receipts for all the songs aswell
You buy one and only one download. It is your responsibility to move/copy/backup your music.
You can try contacting itunes support and asking for an exception, but they are under no obligation to allow.
http://www.apple.com/support/itunes -
My ipod is disabled and the message requests to try again in 223004 minutes. I think it might have something to do with the date being set wrong before it went into disabled mode. Can you assist in enabling.
You'll need to connect it to the iTunes library you normally sync it with and restore it. If iTunes asks you for this passcode before it will let you proceed, connect the iPod to iTunes in recovery mode instead using the instructions in this Apple support document.
iOS: Unable to update or restore
B-rock -
i tried to resore my ipod 5 and the cable disconected and now its in recovery mode, how do i get it out?
If not successful try the remaining items of:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
hi, please help i have just tried updating the software on my phone and it says it has gone into recovery mode and it wants to reset it - how do i get it out of this without losing everything?
If the iPhone is in recovery mode, everything is already gone. Restore from
iCloud or your back up. -
I can't get my phone out of recovery mode. Even if I restart it, all it says is that it needs to be plugged into iTunes. But when I do that, it tries to restore it again and it fails. How do I fix this?
i have this problem too! have you fixed yours yet?
-
I'm trying to update itunes but not very successful and im not making much progress. Im currently getting a message on the screen from Window Installer quoting configuration data for this product is corrupt while trying
The path 'C:\Documents and Settings\HP_Administrator\Local Settings\Application Data\Apple\Apple Software Update\iTunes.msi' cannot be found. Verify that you have access to this location and try again, or try to find the installation package 'iTunes.msi' in a folder from which you can install the product iTunes.
Unfortunately, this sort of trouble has gotten more complicated to deal with ever since Microsoft pulled the Windows Installer CleanUp utility from their Download Center on June 25. First we have to find a copy of the utility.
Let's try Googling. (Best not to use Bing, I think.) Look for a working download site for at least version 3.0 of the Windows Installer CleanUp utility. After downloading the utility installer file (msicuu2.exe), scan the file for malware, just in case. (I use the free version of Malwarebytes AntiMalware to do single-file scans for that.)
If the file is clean, to install the utility, doubleclick the msicuu2.exe file you've downloaded.
Now run the utility ("Start > All Programs > Windows Install Clean Up"). In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove".
Quit out of CleanUp, restart the PC and try installing iTunes again. Does the install go through properly now?
(If you do find a clean download site for the correct version of CleanUp, please don't tell me where it is. Without wishing to sound paranoid (although I grant it does sound paranoid), there is a non-zero chance that posting links to download locations for the utility here at Discussions leads to that download location being shut down.) -
iphone 3g not working because of uncompatible update, what should i do?
There is no way to update a 3G to iOS 4.3.x using approved Apple procedures (meaning using iTunes), so presumably you used a non-approved procedure to do it. You may now have an iBrick, but you can try to restore it to a supported version using iTunes and DFU mode. See: http://support.apple.com/kb/HT1808. If this fails there may still be a way, but you won't find it in this forum. You need to try some iPhone hacking sites.
-
My iPhone 4S is stuck in recovery after performing an upgrade. I just returned from Italy and have hundreds of photos, how can I recover them?
Thanks!Follow this
http://support.apple.com/kb/HT1808
your data is already gone ,no backups ? -
My iphone 4 wont update and is stuck in recovery mode how do i get it out of it?
My iphone4 tried updating iso7 it then told me to plug it into itunes ( it wont go off it so i cant use my phone at all) and says it needs to recover but it says error so i can what do i do
this may help. http://support.apple.com/kb/HT1808
-
I was updating from 6 to 6.1.2 and my phone went into recovery mode. I usually get a 3014 error but sometimes it gets past the USB screen and goes about halfway through the apple screen and gets a -1 error. I don't have firewalls, no antivirus, the only thing I have is a mandatory college internet connection program that I don't think I can get rid of. What should I do
Also, I already tried to "Hold both home and power button, let go of the home button at the apple screen" but it didn't work.That is usually a result of an iPhone that at one time has been hacked, jailbroken, or rolled back. Try it on a different computer.
-
I tried to update iTunes with the latest version and I got a message saying that - MSVCR80.dll was not installed. I think I successfully installed that through an online help website but I now get R6034 - C\Program Files(x86)\iTunes\iTunes.exe
Hello Bignige52,
The following article provides steps and information that can help get iTunes updated and working.
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
Cheers,
Allen -
i have just got an ipad mini 2 and i am trying to back it up however it gets to step 4 then keeps saying syncing ipad but now wont change, what shall i do?
Hi Gavinchick,
Thanks for visiting Apple Support Communities.
Start with these tips if your iPad mini is stuck on "syncing" when you try to back it up:
Update to the latest version of iTunes.
Plug the device directly into a high-power USB 2.0 port on the computer. If possible, use a USB port on the back of the computer.
Avoid plugging the device into a keyboard, display, or standalone hub. The USB ports on these accessories may be low-power or only offer USB 1.x connections.
If you are using an accessory, remove the accessory and connect the device to the computer using only the Apple 30-pin to USB Cable or Lightning to USB Cable.
If you have access to additional Apple 30-pin to USB Cable or Lightning to USB Cables, try testing with another if the first one doesn't work.
Restart your computer and device. To restart your device:
Hold the power button until "slide to power off" appears. Slide to power off your device. When it is off, press the Sleep/Wake button to turn it back on.
Disconnect all USB devices from your computer, except for your keyboard and mouse. Then reconnect the iOS device. If the issue is resolved, reconnect other USB devices, testing after each connection.
You can find these steps and more information here:
iOS: Troubleshooting USB connection
http://support.apple.com/kb/TS1286
Cheers,
Jeremy -
I have an iPad mini, but it will not let me update. It is saying that I do not have an internet connection, but I am connected to the wifi. I have tried on 2 different wifi networks and I do not have internet service-it's wifi only. How do I update?
Please download iTunes from Apple.com and then sync your ipad.After which your ipad will appear on the right hand side upper corner of iTunes.Select your ipad and click check for update,once update has been found click update and follow the steps after that.
-
I have an ipad 2 16GB and I'm almost out of storage. To get more, can I put more storage onto it or will I need a new iPad?
You cannot expand the iPad's memory. You delete stuff off, or make sure the next one you buy is larger.
Maybe you are looking for
-
[Solved] (Partial) Loss of vid acceleration with xorg 1.7 & nvidia 190
I've noticed people having a lot of problems with the new xorg server crashing, but my problem appears to be different: Xorg is stable, hasn't crashed yet: but games (and steam) fail to load. However, video acceleration works just fine for compiz a
-
How to compare user entered date with current date
Hi all my requirement is, user allowed select one date, in code i have compare this date with current day date. it should be 15days gap other wise display error message. I am worried about how to get current date in code. Is there any code to get cur
-
Migration from Win/bootcamp to OSX Lion
I'm trying to migrate from a Windows installation running in BootCamp on an iMac (old) to a new iMac running Lion. NO - I'm not trying to migrate BootCamp -> BootCamp, but from Windows to OSX. The old iMac is running WinXP SP3. The Migration Assistan
-
Location of MTA and POA config files:
Hello. I'm reading an article from cool tools by Kiril Stankov regarding moving a groupwise database to a new volume or server. In step 4 he says if you are moving data between servers make sure to copy the POA, MTA, WAA and GWIA config files. The on
-
Bridge CS4- Cannot get vertical filmstrip
Hi, Even though I select the vertical filmstrip option, I only get the images at the bottom, horizontal display, not vertical on the side as in Bridge CS3. What am I missing?