I have a Iphone 5c and the screen light open when I press a button but nothing appears on the screen and I can't do anything

I have a brand new Iphone 5c since like 2 weeks ans just today this happened, Cell is full charge everything is good i'm using it and then put it in my pocket for about 1hour and when I pick it out it don't work anymore !! the screen doesn't work like it lights up when I press on any button but I can't see nothing the screen stay black and I can't do my code to unlock it or even answer a phone call !!

You have voiceover on. First try tapping the home button three times fast to turn it off.
If it is still on the gestures are different. You tap once to choose an item then double tap the item to activate it. Remember everything that was one tap is now tap then double tap. Start with the lock screen. Tap, then double tap your code. Swipe with two fingers to open, if the screen doesn't slide with two fingers try using three.
Tap then double tap each of the following. Settings> general> accessibility> voiceover > off.
Good luck.
Edit. I'm not sure if you need two fingers to slide to unlock. Try with one finger. If that doesn't work try two.

Similar Messages

Computer turns on but nothing appears on the screen

Hi,
I have had this desktop computer for about 2 years. I usually use it almost daily and turn it off at the end of the day. Every few months or so the computer would turn on but nothing would appear on the screen. I would have to hold the power button to turn it off then turn in on a couple times or wait until the next day and the computer would turn on and everything would appear on the screen and work perfectly. Last week, the computer once again turned on but nothing appeared on the screen, except this time, after a week, the computer will now turn on except there is still nothing appearing on the screen. I no longer hear the fans running, however, I hear everything else running as normal. I have unplugged and re-plugged in all the cords multiple times and still, nothing.
Please help! Thank you.

Kelly, welcome to the forum.
When requesting help you should always include the make/model (i.e. p6-xxxx) of the computer and/or monitor. This information is necessary for us to review the specifications of them.
Signature:
HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
HP Photosmart 7520 AIO
++++++++++++++++++
**Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
Intelligence is God given; Wisdom is the sum of our mistakes!
I am not an HP employee.

My mum has an iPad 1, the email programme will not open properly. If you click on the icon it opens only for a few seconds but then shuts. In that few seconds you cant select anything that you see on screen. Any ideas? Thanks

My mum has an iPad 1, the email programme will not open properly. If you click on the icon it opens only for a few seconds but then shuts. In that few seconds you cant select anything that you see on screen. Any ideas? Thanks

If the Reset Ian mentioned doesn't work...
Shut down and restart the Mail app...
- From any Home Screen, double tap the home button to bring up the Recents List
- Tap and hold any icon in this list until they wiggle
- Press the red to delete the Mail app from this list.
- Press the home button twice when done.
- Restart the Mail app

Icloud cpanel for outlook starts, but nothing appears on the monitor. The process is running in the background.

The process is running in the background. However nothing appears on the screen for you to alter your settings.
I have windows 7 64-bit and outlook 2010.
It was working, but just stopped after several months. I have un-installed and re-installed several times, to no avail.
Please help.

I have sorted it now, thank you.
Re-installed older version of icloud, and then updated the software throught the apple software updater.
This re-solved the issue.

TS1717 Apps store updates badge shows 3 updates but nothing appears in the window...??

Apps store udates badge on my iPhone indicates 3 updates available but nothing shows in the window......anyone had this issue and what is the fix..?

I have the same issue start yesterday. I called Apple as I believed the issue was with the App Store app update server. An Apple support rep confirmed I was correct. The issue now seems to have been resolved.
I told Apple support rep that they should have issued an email to their App Store customers or placed a note on there website so the customers wouldn't waste their time trying to figure out what happened and/or waste time trying to fix an issue that they could never fix.

I dropped my iphone 4s on the floor and now my screen wont turn on. it isnt cracked or anything. also when someone rings me my ringtone plays but nothing appears on the screen

Hi. So I dropped my iPhone 4s on the floor, and now my screen won't display anything, but it still plays sounds, for example when someone rings or text me.
Please help me ASAp, and I will be grateful for any help

Try a reboot, hold both the power and home buttons until the apple logo appears and it restarts, if it doesn't "appear" but does restart, does it then turn on?
If not, time to visit an Apple store genius bar and have the techs run some tests to see what is wrong.

Phone just died, will not turn on or accept charge. i asked a friend to ring me , the said it rang but nothing appeared on my screen, help?

iphone 4 has died, will not restart or accept charge, screen stays black. asked a freind to ring, they said it was ringing but nothing was appearing on my phone. help anyone?

Press & hold the Sleep/wake Button & the Home Button at the same time for about 10 seconds or until you see the Apple logo on the screen ,, ignore the Slide to Switch Off message >>>

Just installed DVD Studio Pro 2 in Power Book G4 Lap but I cant view Subtitles in the grew square while typing the text. I see the text in the Inspector but nothing appears in the grew square. Once finished the subtitle I run the sceen and see the subtitl

I just installed DVD Studio Pro 2 in a Power Book G4 Lap but I cant see subtitle text typing after doble click a new subtitle. I see the text that I am typing in the Inspector Window but the grew square in the Monitor Window seemes empty. Once I finished the subtitle I can run the video and the subtitle appears in color, font and size chosen. Creating the next subtitle I can even go to the one before click once over the subtitle, then click above to get the videoline tool over the subtitle and I will see the subtitle in the Monitor and editing the text in the Inspector I can see the changes in the Monitor. But as soon as I doble click the grew square appears and the text dissapears. Sin doubt the text is there because I can select the invisible text with "Apple"+"A", and then change fonts and sizes and it works. In Color settings I tried every posible combination of Mapping types, color and opacity. In DVD Preference I checked the subtitle settings. The monitor text defaults work perfectly and double clicking texts in the Monitor window where a grew sqaure appears and the text is visible just works correctly. Somebody can help? Do I need to change some configuration in the LAP?

I just installed DVD Studio Pro 2 in a Power Book G4 Lap but I cant see subtitle text typing after doble click a new subtitle. I see the text that I am typing in the Inspector Window but the grew square in the Monitor Window seemes empty. Once I finished the subtitle I can run the video and the subtitle appears in color, font and size chosen. Creating the next subtitle I can even go to the one before click once over the subtitle, then click above to get the videoline tool over the subtitle and I will see the subtitle in the Monitor and editing the text in the Inspector I can see the changes in the Monitor. But as soon as I doble click the grew square appears and the text dissapears. Sin doubt the text is there because I can select the invisible text with "Apple"+"A", and then change fonts and sizes and it works. In Color settings I tried every posible combination of Mapping types, color and opacity. In DVD Preference I checked the subtitle settings. The monitor text defaults work perfectly and double clicking texts in the Monitor window where a grew sqaure appears and the text is visible just works correctly. Somebody can help? Do I need to change some configuration in the LAP?

IPhone 5 some times Doesn't respond when i press home button or sleep/awake button

hi all i am having one issue with my iphone 5 16gb white, some times when i press home screen or sleep button to check my phone, nothing happens, it shows nothing like not responding, but after approx 1 mint i press again it shows lock screen and i can use this iphone like normal.
daily 2-3 times it happens with me. same thing with my friend also.
i tried reseting , restoring, and all other tricks, but couldnt able to resolve this issue.
Please help..

Hello ikashwin,
Thanks for using Apple Support Communities.
I'm sorry to hear about the difficulties you're experiencing with your iPhone. Please follow the troubleshooting steps below:
Buttons and Switches
Sleep/Wake button won't lock or unlock iPhone
To lock the phone, press the Sleep/Wake button. Note: By default, if you don't touch the screen for a minute, iPhone locks automatically.
To unlock iPhone, press the Home button or the Sleep/Wake button, then slide the slider.
If either of the above steps don't work, try turning iPhone off and then on again.
If the iPhone will not power off, reset it.
Try to lock or unlock the phone.
iPhone: Hardware troubleshooting
http://support.apple.com/kb/ts2802
Issue not resolved
My issue is still not resolved. What do I do next?
Contact Apple Support.
Take care,
Alex H.

I cannot type anything into the Google search field; each character typed brings up a list of suggestions below the search field, but nothing appears in the search field itself.

When in Mozilla and I bring up Google, the search field appears but the cursor does not blink as it ordinarily would do. When I try to type a search string it doesn't appear in the search field, instead a list of suggestions appear depending on the character(s)

Solved: This was caused by replacing the SegoeUI (Regular) true-type font. I have no idea what process or why that font was deleted, but finding the segoeui.ttf file on another Windows machine, emailing it to myself, saving it to disk, then right-clicking and choosing "Install" fixed this problem.

HT1296 I'm trying to sync a new iPhone 5 on a laptop using Windows 8 and iTunes. It says it is syncing my calendar using Outlook but nothing appears on the iPhone. The "sync" just takes a second or two.

What do I need to do to make this work?

The iphone is not a backup device.
You need to copy everything from your old computer, or your backup copy of your old computer to your new one.

Firefox crashes when I pressing Browse button to upload files. The crash-ID is :bp-fcb99cd3-dbc3-4bab-ab00-49b632130409 and bp-b39ac817-7d8f-4f1b-a9e5-9f96e212

when I want to attach a file in gmail or yahoo mail, firefox crashes with the crash-IDs of bp-fcb99cd3-dbc3-4bab-ab00-49b632130409 and bp-b39ac817-7d8f-4f1b-a9e5-9f96e212
my windows is 7.

Hello,
Unfortunately, I am not able to pull up the crash reports but try safe mode:
'''Try Firefox Safe Mode''' to see if the problem goes away. Safe Mode is a troubleshooting mode, which disables most add-ons.
''(If you're not using it, switch to the Default theme.)''
* On Windows you can open Firefox 4.0+ in Safe Mode by holding the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
* On Mac you can open Firefox 4.0+ in Safe Mode by holding the '''option''' key while starting Firefox.
* On Linux you can open Firefox 4.0+ in Safe Mode by quitting Firefox and then going to your Terminal and running: firefox -safe-mode (you may need to specify the Firefox installation path e.g. /usr/lib/firefox)
* Or open the Help menu and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
[[Image:FirefoxSafeMode|width=520]]
''Once you get the pop-up, just select "'Start in Safe Mode"''
[[Image:Safe Mode Fx 15 - Win]]
'''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshooting extensions and themes]] article for that.
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
''When you figure out what's causing your issues, please let us know. It might help other users who have the same problem.''
Thank you.

How do you get a cd out of the imac g5 drive if the computer doesn't know it's in there. I've tried shutting it off and holding the mouse button, but nothing works because the computer can't eject what it isn't registering to be there in the first place.

I can't get access to the cd that is probably slid past where it is supposed to go. The computer doesn't note it is in there. This happened once before and I used another cd to tap it into place, and then I could eject the cd. It's a library music cd and nothing I've done to eject it, works. The dvd drive is empty to the computer, even though I've tried to trick it by getting it to burn a cd or dvd. It says insert disc. Hope someone knows how to pop it into place or open the thing up to get access to the drive. That cd is due!

power off your machine. hold down your left mouse button. power on your machine. This should eject the cd.
Eject cd
Here is a web page on twelve ways to eject the cd.
http://www.osxfaq.com/dailytips/01-2003/01-16.ws
You indicate you are running on a g5, but 10.6 doesn't run on on a G5.
On a PowerPC-based Macintosh (but not an Intel-based Macintosh), you may use Open Firmware to eject a CD or DVD disc when normal methods for ejecting it have not succeeded.
Immediately after the startup sound, press and hold the key combination Command-Option-o-f. Enter commands:
eject cd
mac-boot
http://docs.info.apple.com/article.html?artnum=106752

I just added LG GP 60 Dvd writer to my mac and it will not open when I press the button to release the dv

I just added an LG GP60 DVD writer to my Macbook Pro and the the drive will not release the disk when I try to ejecct it...any one can help?

I only got a disc for windows and I have read that for mac it is a plug and play. It works fine when I put the disc in but when I go to remove it I have to unplug it from the USB connection and replug and then the light comes on and I can hit the release button. I want to be able to hit the release button and the drive door just pops out so I can remove my CD.

Brand new mac air and can't get beyond the voice over at the very start ... Clicked on Ireland but nothing happening please help...also can I use my existing wifi modem or do I need apple export ??? Help help !!!!

Just got the macair it wouldn't all me to do anything but listen to the voice control demo ???? What am I doing wrong guyz

1. Hard press the trackpad to register the click until "Tap to Click" is enabled.
2. You can return a new Mac within 14 days of purchase.
A new Mac comes with 90 days of free tech support from AppleCare.
Call AppleCare.
Best.

I have a Iphone 5c and the screen light open when I press a button but nothing appears on the screen and I can't do anything

Similar Messages

Maybe you are looking for