I have a iPod classic 80GB (2008) which no longer plays or connects to iTunes

My iPod worked faultlessly until recently when it suddenly began having difficulties connecting to iTunes and the wall charger. I managed to reset the iPod and it worked as usual for 2 days but then it decided to revert back to not working. When connected to the computer, the screen flickers with an Apple logo every 2 seconds but there is no other connectivity. Pressing the iPod central button and Menu together brings up the logo for a few seconds but makes no difference. I have changed connectors with no difference.
Now it is completely dead unless i connect it to a radio with an iPod dock. Then it works as normal and states it is fully charged! I can navigate the Menu and select songs. However, as I can't connect to iTunes I can't add any new songs and I can't take it anywhere with me.
It has been well taken care of since new and lives in a protected cover. What is wrong and How do I fix?

Hi Luckytimmytot,
Thanks for your reply and letting me know it did not work. It sounds like a different direction may be warranted here. Due to the nature of your issue you may find more information by using another one of Apple's support resources:
http://www.apple.com/support/contact/
Take care,
- Ari

Similar Messages

  • Please tell me which Ipod dock adapter is compatible with the Ipod Classic 80GB?  They no longer make this particular Ipod and I need the right dock adapter for my Panasonic SC-HC25 stereo system I recently purchased.

    Please tell me which Ipod dock adapter is compatible with the Ipod Classic 80GB?  They no longer make this particular Ipod and I need the right dock adapter for my Panasonic SC-HC25 stereo system with universal dock for Ipod/Iphone I recently purchased.
    You can also send my answer to [email protected]
    Thanks in advance for all who will help.
    slovebk

    refer to this Apple support Article, on Universal Dock which retail at $59 at Apple store.
    http://support.apple.com/kb/HT1380
    Look through the compatible list chart and see which 80GB model are you using, either ID 9 or 10. you can order through Apple Online Store.
    Have a nice day!

  • I have a ipod classic 80Gb version 1.1.1 pc , but I can't sync with iTunes . Please give a solution.

    Dear sir,
                    I have a ipod classic 80Gb version 1.1.1 pc , but I can't sync with iTunes . Please give a solution
    Yours faithfully
    Vineesh

    Hello Vineesh
    Try out the troubleshooting assisting below to get your iPod Classic to start syncing again properly.
    iPod classic Troubleshooting Assistant
    https://www.apple.com/support/ipod/five_rs/classic/
    Regards,
    -Norm G.

  • I have an ipod classic 6th generation which has a 160gb MK1626GCB HDD in it. This drive has failed so I bought a new one. I don't know how I've managed it but I've ended up with a 160gb MK1634GAL. Can I just get a different ribbon so it fits?

    Hello I hope somebody can help. I have an ipod classic 6th generation which has a 160gb MK1626GCB HDD in it. This drive has failed so I bought a new one. I don't know how I've managed it but I've ended up with a 160gb MK1634GAL. The connectors on the hdds are different on the hdd end but look the same on the mb end. Can I just get a different ribbon so it fits? Ive looked for one and have found a couple of different ones and the seem to be specific to the ipod although I cannot find one specific for the 160g. Can anyone shed some light onto this?

    Your computer is called an iMac.
    Did you turn proxies on?  If so, you should turn them off.

  • I have a iPod 2nd generation and it will not charge or connect to itunes

    I have a iPod 2nd generation and it will not charge or connect to itunes, I have tried pressing the power button and home botton together and nothing happened.

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       
    Also:
    - See:
    iPod touch: Hardware troubleshooting
    - Try another cable
    - Try another charging source
    - Look at the dock connector on the iPod. Look for abnormalities like bent or corroded contacts, cracked or broken plastic.

  • I have a Ipod touch that don't turn on and when connect to itunes, it's recognize

    I need Help!!!
    I have a Ipod touch that don't turn on and when connect to itunes, it's recognize

    I tryed but it isn't work, it like death, but when I connect to Itunes it is recognize like a Iphone, but without more information, just the name= Iphone and the other thinks are capacity software serial number N/A.
    And when i try to rest isn't Work
    (Thank for your help)

  • I have an iPod classic 80gb, I have fully charged it. The apple comes up on the screen, and it repeatedly makes a clicking noise, switching on and off. I really would like to know what's wrong with it and would like it fixed.

    Need help, want my iPod classic to work!! Question above!!

    Hi Kjcruci,
    If you are having issues with you iPod Classic, you may want to go through the following Troubleshooting Assistant to help narrow down the issue. If you are unable to identify or resolve the issue, there should be a Service link at the end of the Assistant that will have additional options.
    Apple Support: iPod classic Troubleshooting Assistant
    http://www.apple.com/support/ipod/five_rs/classic/
    Regards,
    - Brenden

  • IPod Classic 160GB - Lost Of Music & Video Files When Connected To iTunes

    I currently have the latest model of the Apple iPod Classic. It's been working great until I decided to connect it to my laptop, to use iTunes. I've done this so many times before without having any problems. Until recently that is.
    My laptop and iTunes are able to read my iPod, but when it shows up on iTunes the music and video section disappears. Only 'Other' and 'Free' shows on the ipod's GB stats, with only 148 GB left to use. Before this happened, I had only 110 GB or so to use, maybe even less, since I had tons of music and video files stored. Also downloaded games, which also disappeared.
    I thought iTunes was the problem, but when I disconnected my iPod, I searched through it manually, and found that all of music, videos, and games are gone, it's like I didn't put anything in it. The only thing that stayed, was the notes, other than that everything vanished. Is there a way to retrieve my old music, video, and game files back? I tried looking into the hidden files of the ipod itself, and went into 'ipod_control' then to music, but every single folder was empty, all 'F' folders.
    I am deeply frustrated about this. I really hope there are solutions out there to help me, without having to re do everything.
    Forgot to add, don't know if this will help but, when I connected the iPod to iTunes, there was a pop up message saying something like 'CheeziPuffs cannot be found or played on your iPod' I have never had this pop up message before when the ipod worked perfectly on iTunes.
    Message was edited by: classic160

    I am having the same problem. Sometimes I get an error code and sometimes I don't. I tried to get apple to do something about it however mine is also out of warranty so no luck. I have read about a lot a people having syncing issues like this with their ipod classic and I am kind of amazed that apple is not willing to fix this issue. If I get it fixed or have any luck with apple I will post here. Good Luck.

  • I have original ipod touch. Screen wont open and when I connect to itunes, i get message that it wont open without passcode.How can I get anywhere?

    My ipod touch screen is frozen. Screen reads " ipod in disabled. Connect to itunes"We have powered down several times.  When I hook to itunes I get message that it wont open without passcode being intered on ipod touch. I can't enter anything on touch. Any solutions?

    Place the iPod in Recovery Mode and restore via iTunes.
    If not successful, try DFU mode.
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings

  • HT5262 hello i have a ipod 2g and it has been stuck on the connect to itunes for 3 days straight now what should i do

    I need help on my ipod touch 2g it has been frozen the last two days it froze on the connect to itunes logo

    Try a restart (I've had to do this myself, yesterday).
    If that doesn't work, try connecting it to iTunes (as it suggests).
    If that doesn't work, you could try waiting for the battery to drain and then the iPod will turn off. Then put it on charge as see if that sorts it out. (It should).

  • My iPod classic 80GB is recognised by my computer, but not by itunes.

    I cant sync my iPod so cant update the music on it and dont know what to do. I've tried all the troubleshooting suggestions and nothing has worked. I miss my iPod and dont really want to have to buy a new one. Any help would be much appreciated. Thank so much!

    Your "music list" in iTunes is in your iTunes library, not your iPod, so I don't understand what you are describing.
    In iTunes, select Music under LIBRARY in the iTunes sidebar.
    NOTE:  If the iTunes sidebar (along left side of window) is not visible, from the iTunes menu bar, under View, select Show Sidebar.
    That is your list of songs in iTunes, and it is there whether your iPod is connected or not. 
    When you connect the iPod, it should appear under DEVICES in the sidebar.  Click the small triangle to the left of the iPod name, to drop down the iPod's content list (indented below the iPod).  Click on Music there.  To the right, the list of songs on the iPod is shown.  That list is separate from your iTunes library music list.
    Can you describe the problem in your problem in more detail?

  • Ipod classic 80GB 6th Gen Alarm not playing a Playlist

    Is this a software bug? my old iPod Video (5th Gen 30GB, software version 1.3) alarm plays a playlist with no problems.

    So what seems to be the problem then?  Does iTunes still see the device?  If so, just go ahead and sync it as you normally would.
    B-rock

  • When I clicked on the Newest version of itunes something happened and now when I try to access the itunes store I get an error (-32-12) and it says to check my conectivity.  I have three ipods and the problem is with the on line connection with itunes.

    After I clicked and downloaded the newest version of itunes I no longer am able to connect with the store. I get an error (-32-12) and it says to check the connectivity. The problem is with the on line connection. I attempted to reload itunes , still the same problem exists.

    ... and that's a new one that I wasn't expecting ...
    Okay ... lets try a complete uninstall/reinstall as per the following document:
    Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7

  • Which generation iPod Classic 80GB do I have?

    I have an iPod Classic 80GB however I don't know which generation it is, could somebody please let me know?
    The specifics from the back of the iPod are as follows;
    iPod 80BGB
    Serial No:  8K******YMV
    Firmware Version:  1.62
    <Edited By Host>

    Try Here...
    Identify iPod Models  >  http://support.apple.com/kb/ht1353

  • Why does my ipod classic (80gb) connect for a few seconds then disconnect?

    I have a ipod classic 80gb, granted its old, but it has a big memory so I can store my whole collection. Anyway, when I connect it to my PC (with windows 8.1) it will connect for a few seconds then disconnect. It will sometimes start to sync, but then disconnect after a few seconds. My computer is pretty new, Acer Aspire V5. I have tried reinstalling itunes, a new cable to connect it, different usb ports(2) and with and without the pc plugged into the mains, which is when it starts to sync for a brief second. Has anyone else had the same problem??

    The S.I. prefix Giga is used to mean both 1000x1000x1000 and 1024x1024x1024. Computer software typically uses the second version, but using the first number makes the same number of bytes appear bigger when expressed as Gb, so is favoured by hard drive manufactures.
    80Gb10 = 74.3Gb2
    It's a bit like specifying a quantity in gallons without saying whether they are US or Imperial gallons - everybody gets the same volume but one number will be bigger than the other. I could offer you a tank with 10 Imperial gallons of fuel in it - but if I tell you it's 12 US gallons it sounds like you're getting more for your money.
    Once the total size of your library exceeds the capacity of your device all you need to do is create some size limited playlists to determine what goes on the device. Don't sync all movies, sync one or two that you plan to watch soon. Likewise with TV Shows. Limit podcasts to unplayed episodes and finally create a music subset. What worked for me for some time was a smart playlist called Steve's Tunes defined as Playlist is Music and Playlist is not Exclude where Exclude was regular playlist that I would manually add to until Steve's Tunes was small enough to fit. These days I run an iPhone and have a number of smart playlists with ? Gb of most played, ? Gb of highly rated, ? Gb of recently added, ? Gb of essentials, ? Gb of unplayed etc. Each time I sync I get slightly updated selection without having to put any extra effort in.
    tt2

Maybe you are looking for

  • Correct ITunes version for Windows 2000 and Nano

    My daughter just got a Nano for x-mas and is not recognized by old I-tunes software. I assume I need a newer version. However, 8.x that is advertised as latest version does not mention Windows 2000. I can't find any info on what version of ITunes I n

  • Fox Code:Inclusion of field which cant be used as field to be changed or in conditions

    Hi Folks, I have a field and value for that field is made by user selection. Now, i want to include that field in filter used by the planning function. But my question is could i include that field directly in filter using the same variable thats use

  • HT1338 I'm trying to update to ios 7 and it sends me an error message that says

    I'm trying to update to ios 7 and it sends me an error message that says "Software update not available at this time please try again later."

  • Family Sharing on iPad

    Hi this may seem like a silly question.  I've set up my 8 year old with her own apple id, and have activated family sharing.  do I now need to remove my Apple ID from her iPad for the "ask to buy" facility to work properly?  Ive tried a dummy purchas

  • JDBC Installation for BOE

    Post Author: yeungca2 CA Forum: Deployment Hi all I had created a crystal report on my local machine, which using yolus JDBC driver to connect to yolus server. It works fine on my pc. But once I put it into BOE (linux platform) . It doesn't work and