I have a ipod touch 1g touch and lcd screen if some buddy wants to buy it
ipod touch 1g battery touch and lcd screen for sale
Sorry, this is not a place to sell your devices, only for technical problems and questions about Apple products.
Similar Messages
-
Hello,
My Ipod nano 5th Generation has gone to a white screen. I shows absolutely nothing. When I charge it it does not show the battery charge status. When I reset it I never see the apple logo. When it is on though I can still listen to music and it scrolls through the menus. Can you tell me what is wrong and how do I fix it?If you have not taken the iPod apart, Apple will exchange it for a refurbished one for $99. You can do it an an Apple store
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar
Or sent it to Apple -
i have the ipod touch 4th generation and the screen is white, i was going to charge it and it turned white. I have tried to reset it but the apple logo will not show up and it will not turn on! i just got it for christmas... can you please help?
The way I did it was I got the free app sync:stream from the App Store and then added my ipod to my ps3's Bluetooth devices. Then went to audio settings and set output and input to 'Skaggs iPod' you then open the app and it will be listed under music as a media service. You then go to all tracks and click copy (press triangle) it will then begin to copy all of your songs onto your ps3 via Bluetooth. I haven't tried but I assume the same can be done with photos. I hope this was helpful reply if you have any questions :) good luck
-
I have an iPod touch 4th gen. and the screen went yellow. The battery wasnt low when it happened. It has been like this all day. What can I do to fix this?? PLEASE HELP!
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
HT4859 we have a iPod touch 4th gen and the screen is locked and it will let us restore it what now
we have an ipod touch 4th gen and the screen is locked up and it will not back up or restore. I have removed iTunes and reloaded also iCloud the same we are needing help
A reset may help. Tap and hold the Home button and the On/Off button at the same time for approximately 10-15 seconds, until the Apple logo reappears. When the logo appears, release both buttons and await restart. No content will be affected.
-
hi
not even 20 minutes ago i accidentally dropped my iPod touch generation 5. and the screen wasn't responding. it went dark blue/ black color. when you press the on/off button or the home button, all that happens is that the screen light up but not eh background,time and etc. its just a simple black screen with a glow. my iPod has already being cracked before. and i haven't fixed it.
please tell me what i can do. should i reset it or what? my iPod is honestly my life. i backed it up and everything yesterday. im so glad i did that. please helpTry
- Restore from backup. See:
iOS: Back up and restore your iOS device with iCloud or iTunes
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar
Unless you purchased the option AppleCare+ extended warranty
Apple will exchange your iPod for a refurbished one for $99 for 16 GB 5G and $149 for the other 5Gs. They do not fix yours.
Apple - iPod Repair price
A third-party place like the following may be able to fix it for less less. Google for more.
iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens
Fix it yourself if you are up to it. However, it is hard since yo do not know what is wrong
iPod Touch Repair – iFixit -
I have an iPod Nano generation six, and since I had to get a new hard drive on my Macbook pro, the nano no longer registers in iTunes. My other devices show up fine. I have followed all the trouble shooting advice,and nothing works.
This is the ipod touch forum
-
I have put Ipod in restore mode and about 1/2 way through download it goes back to message "disabled type in passcode" ?? I have turned off all security and tried all trouble shooting ideas, any suggestions?? besides paying $$$$ to apple tech support
What appears to be happensin is that before the actual download finishes/restore starts. the recovery mode is timing out. I would do a manual download using the instructions here:
iDevice Troubleshooting 101 :: iPhone, iPad, iPod touch
Then place the iPod in Recovery mode and restore using the instructions in the link. -
I have an ipod that is disabled and i dont have access to a computer
i have an ipod thta is disabled and i dont have acces to a computer any help?
The you ned either an iPhone, iPad or iPod touch with the FindMNyiPhone app and your iPod has to be connected to the interent
If you previously turned on FIndMyiPod on the iPod in Settings>iCloud and wifi is on and connected go to iCloud: Find My iPhone, sign in and go to FIndMyiPhone and use Remote Wipe to erase the contents of your device. If you have been using iCloud to back up, you may be able to restore the most recent backup to reset the passcode after the device has been erased.
You can also wipe the iOS device by installing the FindMyiPhone app on another iOS device and using that app to wipe the device.
You can go to a friend's place or an Apple store -
I have 2 ipods,one for music and the other for old time radio shows.Each had their own file.My computer crashed and I had to buy a new one.Now both ipod files are merged into one.How do I seperate them on the computer?
Hi Craig
Unfortunately, in your case, there isn't really a way to separate them as far as I can think.
You could try restoring from a backup, and choosing an older backup perhaps
Cheers -
I have an iPod nano 6th generation and I downloaded 3 music videos but they won't play on my iPod. They only play on my laptop/iTunes. How can I get it to work? I know that my iPod should take music videos because there is a pre-made playlist called "Music videos". Can anyone help me please????
You can sync the music videos, but they won't play on your 6G Nano, because it does not support video playback. Sorry.
B-rock -
I have an ipod nano 7th generation and can not get it recognised by my Windows 8.1 laptop (it appears briefly on My computer, then disappears). This happened after I updated iTunes to the latest version. Does that have something to do with it?
Hello there, kiwilucea.
The following Knowledge Base article offers up some in-depth steps for troubleshooting your issue:
iPod not recognized in My Computer and in iTunes for Windows
http://support.apple.com/kb/ts1369
Keep in mind if you get to Step 12 Reinstall iTunes, those steps need to be followed exactly as outlined for the reinstall to be effective.
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro. -
I have an ipod nano 7th generation and can't download music from itunes onmy windows vista computer?
iPod not recognized in 'My Computer' and in iTunes for Windows
-
I have my ipod nano 5th generation and when i plugged to my computer it is recognized but i cant do anything. On the ipod all i can see is a blackscreen with the apple sign! How can i fix this?
Howdy Lumagofe,
I was thinking that you may need to reset the iPod Nano, outlined here How to reset iPod http://support.apple.com/kb/ht1320.
Press and hold the Sleep/Wake button and Volume Down button simultaneously for at least eight seconds or until the Apple logo appears. You may need to repeat this step.
If the above step did not work, try connecting iPod to a power adapter and plug the power adapter into an electrical outlet, or connect iPod to your computer. Make sure the computer is turned on and isn't set to go to sleep. Try resetting the iPod while it is connected to power.
If that doesn't quite get the iPod going again, then it will need to be restored. Use this article to help with that Restoring iPod to factory settings http://support.apple.com/kb/ht1339.
All the very best,
Sterling -
Hello. I have an ipod classic generation 4 and I want to add some more music to it however my computer and itunes do not recognise the device when I try to connect it. Is it incompatible with windows 7 or current version of itunes?
It should still be compatible. Have you tried plugging it into a different USB port using a different cable to see if that helps? Perhaps, try it another computer as well to see if it's recognized there.
Otherwise, start by checking to see if it's even recognized in Device Manager. See this article for details.
http://support.apple.com/kb/ts1496
B-rock
Maybe you are looking for
-
Getting ORA-00904 whle running a procedure!
hi , the following procedure is meant for getting the details which has name of the user tables alone along with number of columns,but am getting -ERROR IN BLOCK:::ORA-00904: "tablename": invalid identifier. DECLARE v_cols NUMBER:=0; cursor c is SELE
-
I have a requirement where users need to be created into OIM bu running a one time Trusted Source Recon. Once the users are created on OIM we want to link the account on OID with the user account created on OIM. When we run a Target Recon for these u
-
I lost my contact information once and I have stored it in the I cloud. How do I access it now that it is stored. I have an IBM Lenovo computer. This also applies to my photos and other data.
-
Hi, I have an issue in Project Server PWA 2010, if i click on any of the views in any page like Project Center or Build Team page the views are not displaying( i mean if i click View button the drop down list not working) I could not see the below pa
-
Need so somehow come back from reading a port to do other things.
I got a class that runs a GUI to open a user's webcam and display the view. Then the class goes over to another class that reads from a serial port to display the speed frmo a GPS receiver on the port and display it on the GUI. Then I need the GUI to