I have a iq820 uk touch smart is it possable to upgrade the processor
is it possable to upgrade my processor if so what will i need please
No is is soldered to the main boad.
Similar Messages
-
I have a CQ60-214dx laptop. I would like to upgrade the processor in it to something else. I have read on the Internet that it is possible to swap out the processor as long as you find the right socket, wattage, etc. processor. Is there a list out there of what is compatible with the laptop I have? I was hoping to find a processor that would take it from a dual core machine to a core2duo machine. Thanks for any info you can give me!
This question was solved.
View Solution.Hi:
According to the specs page for your notebook it comes with a Pentium T3400 processor.
According to the service manual, link below, in Chapter 1, on page 1-1, it lists all supported processors that can be installed in your machine.
http://h10032.www1.hp.com/ctg/Manual/c02985882.pdf
That means you can go from your little ol' T3400 processor, all the way up to the mighty T9600 if you want to.
You are 100% correct about needing to know the particulars about the processor's FSB speed, L2 cache, lithography, etc.
Apparently notebook PC's have a much wider range of processors one can install. In a desktop for example, rarely do you get such latitude.
In any event, the only thing you need to check for you PC, is the BIOS release notes to see if any are required to support a faster or newer processor.
I've taken the liberty of doing that for you and note that no BIOS updates are necessary to install any of the supported Intel processors listed for you notebook.
There is one other tool I like to use and that is the Intel Processor Comparison tool.
Here is a sample of comparisons for you to review for proessors that would work in your notebook.
http://ark.intel.com/compare/35581,35568,35563,35583
I am surprised that your notebook can handle processors from 2 different code names.
I also don't like that the sockets supported are not named exactly the same. I googled the difference and it doesn't appear to matter.
However, it should have either the GM or PM 45 chipset which supports any of those Pentium processors listed in the manual.
http://ark.intel.com/products/chipsets/35509#compatibility
I believe the GL40 chipset is for celeron processors only.
So, that is basically it in a nutshell. You should be able to upgrade to any of the Pentium processors listed.
Paul -
I have a late 2009 Macbook Unibody and was curious about upgrading the processor. I just installed 8gigs of ram and was thinking about just trying to make it really fast. I am always in Adobe CS5.5 for my job and want my computer to be as fast as I can make it. Is it possible to install a new processor and is it worth it??
ThanksNo, the processor and the video card are integrated into the logic board.
-
I have an older iPod Touch, I bought a new one and the Itunes on my computer is too old to recognize my new iPod Touch and Itunes cannot be updated. Is there a creditable software program I can use to get all my old music from my old iPod Touch to the new one? It is my understanding that the music cannot be saved onto my new iTunes, b/c I did not have iCloud. I have over 2,000 songs I just cannot part with. PLEASE PLEASE PLEASE help some how!! THANKS!
I had the same problem with my iPad, i couldn't get the newer version of itunes because the computer was too old and my iPad couldnt sync with the old itunes. I got a PC from school a few months later so that solved the problem for me. Unfortunately i don't think there would be a program to put your music on your iPod, iTunes should be the only way to transfer files to Apple devices. What operating system are you running and what version of it is it?
-
i have a mac mini mid 2011, this device have; 2,3GHz and 2 Gb Memmory.I want to upgrade the memory and i need the list of supported memory modules. i am from turkey.
Welcome to Apple Support Communities
The Mid 2011 Mac mini supports 8 GB of memory officially, but you can install up to 16 GB of RAM, so you can use 2, 4 and 8 GB modules. You can buy more RAM from OWC or Crucial.
If you are looking for memory at a local shop, make sure you buy 1333 MHz DDR3 memory. See > http://support.apple.com/kb/HT4432?viewlocale=en_US&locale=en_US -
I have an older Airport Extreme (disc shaped) that we use with my wife's PowerBook (OS 10.5.8) and my MacBook Pro (OS 10.9.4). We currently only have Airport Utility on her Mac, but I want to upgrade the utility so I can use it on mine. Which version of the utility will work on my MacBook, and still control the older Airport Extreme?
if I update the Airport to the latest version, and "control" it with my MacBook Pro, will the older G4 still be able to use the signal from the new Airport?
Yes. Your G4 shouldn't have any difficulty connecting to a Wi-Fi network provided by the latest 802.11ac AirPorts as they support the earlier radio modes that the G4 uses. -
I have Photoshop CC, but I'm getting daily reminders to upgrade the software. This can't be right... Plus, I get reminders to upgrade Photoshop CS6, but I deleted CS6 a while back. Any help would be great...
Sign in or activation errors
Mylenium -
I have had an iPod Touch 3rd Gen for two years pretty much and the apps have worked fine. Suddenly when I go on an app it appears to launch then just exits. I tried turning the iPod off and on again, but that made all my apps behave like that. Settings and those things work fine still. Should this suddenly happen? I dont want to lose all 204 apps.
- First try resetting the iPod. Nothing will be lost.
Reset iPod touch: Press and hold the On/Off Sleep/Wake button and the Home
button at the same time for at least ten seconds, until the Apple logo appears.
- Next try downloading/installing a new app
- Restore from backup
- Last, resore to factory defaults/new iPod. this is last result since you will lose app data. -
I have a Compaq Mini CQ10-400CA and I want to upgrade the RAM - which can I use?
I want to upgrade the RAM from 1 gig to 2gig on my Compaq Mini CQ10-400CA - the question is which ram can I use? I was told my HP the ram was DDR2 800mhz. Now I have seen this :
http://www.newegg.ca/Product/Product.aspx?Item=N82E16820148162
At Newegg in Canada. This looks like it fits the bill, but I don't want to buy it and have it shipped and find out differently. Anyone know if this is a good route to go? It is cheap and it is Crucial, so at least it is reliable.
Thanks in advance.Yes, that is the correct information you have...You will need DDR2 800 MHz PC2-6400 Memory...I have never used or heard about Crucial, I would suggest going for kingstron or corair and I am kind of 50/50 when it comes to A-DATA...This based on listed on newegg.ca
Although I am an HP employee, I am speaking for myself and not for HP.
Make it easier for other people to find solutions, by marking my answer with 'Accept as Solution', if it solves your problem.
Click on the BLUE KUDOS button on the left to say "Thanks" -
I have a second generation Ipod and it was delivered to me without an operating system how do I download one on it
Hello Michael.Suarez,
Thanks for using Apple Support Communities.
If the iPod touch is showing an iTunes logo with a cable, then it is in recovery mode and will need to be restored to the factory settings. To get step-by-step instructions on how to do this, please follow the article below.
Use iTunes to restore your iOS device to factory settings
Cheers,
Alex H. -
I have bought a apple pod touch 3rd generation and my old itunes won't work with it when i download the newer version 10.6 which is what it tells me to do it comes up with i am not high enough or logged on as an administrator this is not true as i am logged on as an administrator and do not understand why this keeps happening
i download the newer version 10.6 which is what it tells me to do it comes up with i am not high enough or logged on as an administrator
What's the precise text of the message, please? (There's a couple of different ones I can think of that you might be getting.) -
The screen just cracked, practically shattered after 5 minutes outside and safely in my coat pocket. There was no bump or drop, absolutely nothing. Is this common? How can I get this taken care of? I got this for my son, it is his second IPOD. After 2 weeks,it's destroyed without anyone doing anything.
It would appear the someting in your pocket broke the screen. A broken screen is not covered by warranty. However, sometimes if you make an appontment at the Genius Bar of an Apple store, the Genius will replace the iPod at no cost. If you have the pay. Apple will exchange yours for $99, $149 or $199 depending upon the capacity.
-
i tried to sign in several times but i keep getting this message.
I also encountered the same problem. Try using a different email address or try signing in later.
-
this happens to me a lot and what i would usually do is to turn off the unit and back on.. what to do to prevent this from happening again?
You can try the standard fixes:
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar -
I would like to get a link to the complete repair manual if possible also.
I have 4 gb of memory can i upgrade this also?
Thanks in advance for help!
cpuz screenstechnolow wrote:
I have HP DV6-2155dx.
Intel Core i3-330M 2.13Ghz
4GB Elpida RAM
500GB 7200rpm Hard drive
I see a long list of AMD and Intel processors in the manual/guide link (pdf manual) for this thread.
Are those all compatible with my HP DV6-2155DX motherboard?
Is there a website/page where I can find specs on the motherboards from HP?
I am considering Intel Core i7-2820QM for my motherboard, is it compatible with my motherboard?
It is hard to find help for this laptop model.
I would like to think it is because this is a great laptop with minimal problems.
Thank you HP.
Hi,
That manual is for a different Dv6 series (Sandy Bridge - Dv6-6000). The laptop has a shared graphics Intel chip so it might not be possible to upgrade to Core i7-720/820QM but should be possible to upgrade up to Core i5-580M as it takes 35W (use the same fan/heat sink) as the original CPU. The RAM can be upgraded up to 8GB of DDR3 - 1066MHz memory. 1333MHz DDR3 modules might work too but will downclock to 1066Mhz so no need to buy them anyway.
Dv6-7000 /Full HD/Core i5-3360M/GF 650M/Corsair 8GB/Intel 7260AC/Samsung Pro 256GB
Testing - HP 15-p000
HP Touchpad provided by HP
Currently on Debian Wheeze
*Please, help other users with the same issue by marking your solved topics as "Accept as Solution"*
Maybe you are looking for
-
How can i add a picture/logo in my email signature?
Hello. I need to add a logo in my signature. How can I do this? I tried to upload but just get a red cross... Thank you
-
Moved my files to external hard drive, now files not found. Help?
My Itunes folder having outgrown my memory, I moved all the files to my external hard drive, following the directions in Itunes. I was able to play the songs as long as the hard drive was connected. However, I opened Itunes mistakenly without the E:
-
How to access a virtual function in a static library?
Hi, everyone, I've the following .C and .h to compile to linktest.a: //linktest.h class linktest{ public: virtual void printinfo(); //linktest.C #include <stdio.h> #include "linktest.h" void linktest::printinfo() { printf("this is a test\r\n"); retur
-
Site Not Appearing When I Open iWeb 09
When I open iWeb 09 my web site usually appears. Now the application opens but the site does not. The inspector apears but nothing else. Under File I cannot open a new page or new site. Under library/application support/iweb the file named Domain is
-
Designer Control automaticaly opens its Preview Window
Hey Guys I am having a problem and hope you can help to fix it up Here is the code i use to open a new Report Using RDC XI with VB6 Set m_Report = Nothing Set m_Report = m_Application.NewReport CRDesignerCtrl1.ReportObject = m_Report The Above Statem