I have a items in a pallet or in a box can I de kiiting directly this box
I have a items in a pallet or in a box can I de kiiting directly this box
Example I have an items with unit of measure each
I have a box 10 has 10 each
also I have a pallet with 100 box of 10
Can I di kiting the pallet directly from pallet to each ?
What means for you "de-kiting" a pallet ? What is the purpose?
Do you use Oracle mobile applications ?
If yes, GTIN functionality could be the response to your request.
Please review explanation in
Unable To Enter The Uom In The Item Cross References Form. (Doc ID 422553.1)
Similar Messages
-
I have some items in my download queue which apparently I can't remove.
I have some items in my download queue which apparently I can’t remove. The items are large (several gigs in total) and I’d prefer to not have to download them, but am annoyed by the fact that it keeps wanting to resume downloading whenever I start iTunes. I’m surprised there’s no way for me to delete it from the queue. I’d appreciate if you would remove these from my download queue.
Once you have them on you Mac disk drag them onto the iPhoto icon in the Dock. Or onto the open iPhoto window. Or in iPhoto file menu ==> import
LN -
I have an I phone 3g and I downloaded the newest software and I can't get any music to play. I can't change my playlists and the songs I have on the phone just get skipped over. What can I do to correct this?
it recognizes the iPOD but I can't get any of the new songs to import to the iPOD
are you getting an error message, Odessa? if so, what does it say? include error message numbers if you're getting any.
if you're not getting an error message, describe what happens when you try to transfer songs to the ipod as best you can. -
My airport turns off by itself and I have to restart the computer for it to work again and it only turns off again. I have Mac OS X version 10.6.8. What can I do to solve this problem?
Usually the HDD is the frist place to look. Use the original install disk and start up the MBP with the C key down. Go through the installation process until you see on the display a menu bar on top.
Click on UTILITIES.
From the drop down menu select Disk Utility.
Open Disk Utility>First Aid and run Verify and Repair.
What are the results?
Also look at these articles:
https://discussions.apple.com/docs/DOC-3521
http://www.thesafemac.com/mpg/
Ciao. -
When I start Firefox, about 15 seconds after I start it, my Firefox freezes for about 1 minute. I found out that it is my Hotmail that makes Firefox freeze.
First I thought it was my computer, but I have 2 other girls in my class that use Hotmail and Firefox and their computer also freezes for 1 full minute.
This is very annoying, what can I do to change this?
xxx ellen
p.s. I am from the Netherlands, maybe that has something to do with it?Try deleting cookies and cache:
1. Tools| Clear recent history
2. Time range to clear: Everything
3. If it isn't already selected, select '''Cookies''' and '''Cache'''
4. '''Clear now'''
'''Check cookie exceptions'''
1. Tools | Options | Privacy Panel
2. Set '''Firefox will: Use custom settings for history.''' '''Insure Accept cookies for sites and accept third-party cookies''' is selected
3. Click '''Exceptions'''. If the misbehaving site is in that list, select it and click '''Remove site'''
'''Safe Mode'''
Add-ons can cause problems with not being able to log into certain websites. To see if this is the case with your issue, run [[Safe mode]]. When you get to the safe mode window, select Continue in Safe Mode. If this resolves your problem, see [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]
Also see [[Updating Firefox]] and [[Cannot log in to websites]] -
Since installing 10.7.3 my downloads say that I do not have enough space on my computer for the download. These downloads are never more that 200 megs or so and I have 270 gigs left on my hard drive. Somehow the remaining space on my hard drive is not being correctly read. What can I do to fix this? I have run permissions repair several times, but to no avail.
Th downloads do not finish. I am dowloading to a file on my desktop called MUSIC, but it first starts to download to my desktop and then I move it to the MUSIC file also on my desktop and I have been doing this without incident using 10.7.2 as well as 10.7.1 and 10.7.
-
Can anyone please help me????.......I want to delete music which I bought a while ago.I tried to delete on my laptop,my laptop refused to sync my ipad then it went red on the screen.I rebooted and nothing no power on the laptop nothing.can I delete music another way on my ipad or am I stuck with the music I have on my ipad....please please help me :(
No, at the moment you can only delete music when connected to your computer's iTunes, you can't delete it directly on the iPad.
-
Hi there!
I've forgotten the restrictions passcode that I set up. I've failed on 5 attempts. What can I do to get rid of it and access safari again?! I've restored original settings (which happily updated my software), but then restored the last phone back up which I made & so, of course, still have restrictions set as on. Any help would be greatly appreciated!!! Thanks.To remove the Restrictions passcode you will need to Restore the Device as New...
You will not be able to perform a backup as this would include the Restrictions passcode... which is what you have to remove...
https://discussions.apple.com/message/16804924#16804924 -
For some reason my Quicktime will not play a mpg file. It says that my computer does't have the proper codec to support the file.
The info in this thread should help you - https://discussions.apple.com/thread/3648239?start=0&tstart=0
-
Purchased and installed Contribute CS5 after changing computer/Windows 7. Have valid serial number which is accepted onthe activation screen, however it says it cannot find CS5 on my computer and lists CS3 and CS4. The Trial version works and I have been going this route however now I am out of trial usages...help please! Going through another marathon phone session with Adobe to sort out another installation/serial number issue is not in my workday plans. BTW, this is only installed on this one computer.
Perfect! Thank you! I did purchase/install as an upgrade. Did not notice the black space to the right was to input the previous version serial number...fixed!
-
Windows XP on Dell Dimension 4600. Updated Firefox to 4.0.1 successfully but Roboform didn't transfer. Help told me I needed to update Roboform. I did and paid for a new version(7.?)which was $9.95. Roboform wants more details but I can't tell what they want. I'm baffled and frustrated since all my passwords are hidden somewhere. Wish I'd never upgraded FF.
Nothing is working and I can't find the Roboform toolbar. Your lack of direct support is really irritating- a live chat at least would be helpful.
-
I have a problem licensing premiere pro after downloading the trial can someone help me fix this
Everytime I launch my premiere pro I did a message saying a problem occurred while licensing Your product restart your computer and relaunch the product And when I do this it doesn't change I get the message again can someone help me please
Chat http://www.adobe.com/support/download-install/supportinfo/
-
The file in question was saved in AI CC2014 the night before. I checked all other cc2014 files and they are the same problem.
Thank goodness they open in AI CC.
Any help is appreciated.
On a MBP Latest Mavericks OS.YThom,
This should help to revert to the earlier CC version:
http://prodesigntools.com/adobe-cc-version-control.html -
When I try and print an "Approach Plate, or Departure" from ForeFlight to my Epson Stylus NX430 using AirPrint the image is resized. How can I print without it resizing. I want to have the plate print in the original size so I can use it. Is this an Apple, Epson, or Foreflight Issue? I just purchased the printer so I can return it and get a different model or brand. I spoke to Epson and the suggestions given did not resolve the issue. I have cut the paper down to the size of the plate roughly 5.5x8 and it still try's to print at 8.5x11. I have also requested help through ForeFlights Tech help but have yet to receive an answer.
Please help!It varies based on what you ordered and whether it is in stock or has to be assenbled and shipped from China. Your email conformation should give an estimate of when the items are expected to be shipped or available for pick up if you are having it sent to a local Apple Store.
-
I am having trouble connecting my bluetooth headset on the ipad 1. I have now been told that Apple is only allowing several headsets to be used with Ipad. Is this correct? I have a grundig headset and a plantronics headset but these can both not be found
Check this out....
http://support.apple.com/kb/HT1664
Maybe you are looking for
-
Satellite A200-1AE - Is it possible to upgrade the graphic card?
Could you please tell me what model of graphics card or chipset could be used to upgrade this laptop? Will it be possible to with "CUDA"? If can I change the processor to a higher, without cooling, to do other?
-
I was typing a paper and the entire doc. turned to asterisks. Then I panicked and hit save thinking that would be beneficial. Now I only have a doc. with symbols. Is there a way to find an earlier version of the paper? I have saved it at least a doze
-
i want develop a dental software ..it is RIA web application...how can develop using java(swing,applets,jsp,servlets),java script..please help me..
-
CS3 / javascript / Creating anchor frame and placing xml element
Hi All, I have a problem with creating anchor frame, that is Actually i have created anchor frame, but it is not allowing to place the xml element, it shows "inline frame xml elements not allowed" some thing like this. I have handled anchor frame typ
-
How to Move a field from Header Screen to Overview Screen in SRM 7.0
Hi, I have a requirement to move a Standard field Service Date from Heder Screen to Overview Screen in Invoice in SRM 7.0. Please let me know how to do it. Both screens are Standard Web Dynpro Components. I appreciate your help!! Thanks, Monica