I have a key figure in my master data table i want to display the key figur

Hi All,
I have a key figure in my master data table i want to display the keyfigure in my report how can i display it can somebody help me in this scenario
Regards
Kiran Kumar

Hi Kiran,
Assume that Material master data table material has price as an attribute. To get this price as key fig in query, get material number in rows and in columns create new formula with replacement path to get material price as key figure.
Note: Without taking material number into rows, we can't get the price into columns.
Hope this helps u..
Cheers......
Sk babu

Similar Messages

I have a numbers spreadsheet for tracking company data. I want to copy the format of the spreadsheet (rows, columns,and formulas) but have all of the data fields be blank for the new year. How do I do that?

I have a numbers spreadsheet for tracking company data. I want to copy the format of the spreadsheet (rows, columns,and formulas) but have all of the data fields be blank for the new year. How do I do that?

click and hold on one cell, then drag to select the range, then release, then type the delete key. Only inlude cells in the range you do not want to keey the contents of the cell. You can remove one-off cells by holding the command key and clicking cells to add or remove as needed.
You can download the Numbers users guide here:
http://support.apple.com/manuals/#productivitysoftware

How can i make indexes on the Master data table

Hi Gurus,
I got a query, in this one i have an Infoobject with many values, like to say invoice number, and i filter and need a lot of Nav Attr of this IO, for this reason the query performance its really bad but i dont know what to do, some friend advice me this : So I would suggest some indexes on the Master data table of your IO for the navigationnal attributer you want to use.
what else can you tell me? if i put this IO in Line item dimension? , or just with flag high cardinality ? help guys.....

Hi Jorge.....
Look.........Line item dimension and High Cardinality r related to each other..............Characteristic which has High Cardinality..we will use it as Line item dimension..........But........A dimension marked as a line item cannot subsequently include additional characteristics.......... This is only possible with normal dimensions...........If u r very sure.............then u can go for Line item dimension............no issues........
U can also try to Create index..............
Check this...........
Re: Indexes on Master Data tables
Regards,
Debjani..........

CVC creation - Strange issue with Master data table of 9AMATNR

Hi Experts,
We have encountered a strange issue with Master data table (/BI0/9APMATNR) of info object 9AMATNR.
We have a BADI implemented for checking the valid Characteristic before creation of the CVC using transaction /SAPAPO/MC62. This BADI puts a select on master data tab of material /BI0/9APMATNR and returns no value. But the material actually exists in the table (checked through SE16).
Now we go inside the info object 9AMATNR and go to the Master data Tab. There we go inside the master table
/BI0/9APMATNR and activate that. After activating the table it is read by the select statement inside BADI (Strange) and allows the CVC to be created.
Ideally it should not allow us to activate the SAP standard table /BI0/9APMATNR. I observed that in technical settings of this table it has single record buffering as switched on. (But as per my knowledge buffer gets refreshed every 2 to 4 mins and not in 2 days or something).
Your expert comment is valuable to us. Thanks.
Best Regards,
Chandan Dubey

Hi Chandan,
Try to use a WAIT statment with 5 seconds before your select statment.
I'm not sure whether this will work. Anyway check it and let me know the result.
Regards,
Siva.

M or P master data table to be used in routine read statement

Hi
I update of a DSO i had a requirment for a routine to get the Attribute of a Infoobject.
So which master data table M or P table i need to use in my read statement and why
Thanks

Use M table as it it the view on time dependent(P table) and time independent(Q table) tables.
M table is view on time dependent and time independent attributes, you can see characteristic values and all the attributes for the Characteristic.
The tables that go in the view are the Master Data Table and the Time-Dependent Master Data Table. If the characteristic only has time-dependent attributes, only the time-dependent master data table goes in. If the characteristic has only non-time-dependent attributes, only the master data table goes in.

Field not being updated in Master Data table

Hi guys,
I'm pulling data from master data in BW... specifically 0ven_compc. I haven't added any new fields to this maser data table, and one field that I'm trying to pull is not being populated. In the master data table this field is blank, but in the PSA there are values. Somehow the values are not being loaded into the master data table. I've checked the transfer rules and communication structure and everything looks fine. Why is this happening?
Thanks,
Anthony

Hi Anthony,
The problem may be that there is an inconsistency with the target master data infoobject. Please make a dummy change to the target infoobject (i.e you can change the description), save this change and then click on the activate icon. Please then check if the field is filled with the next load.
If the problem still exists please let us know your BI version and support package level.
Best Regards,
Des.

What's the purchase order agreement master data table name?

hi experts
what's the the purchase order agreement master data table name? and by the way tell me some relative table about agreement.
thanks a lot and hunger for ur advice.

Hi,
EKKO is the purchase order master table. EKPO is the item table. EKBE is purchase order history table. EBAN is purchase requisition table. EBKN is purchase requisition account assignment table.
Reward.

Master data table locked

Hi All,
I am doing Master Data loads, Longtime back we scheduled Infopackage Group IPAKGRP is having 3 Infopacks(ATTR,TEXT,IDATTR) are running as full loads in BW-DEV.
Today , for testing purpose I created to new Infopackage for ATTR only , and scheduled immedialtly,data comes in RSA3,PSA but not into Infoobjects i.e master tables:
it shows :
Master data table locked to processing
Diagnosis
The master data table is currently being processed. It is therefore locked and no other update processing can be carried out.
System Response
Update has been terminated.
Procedure
You can delete the lock if it is a leftover setting from a canceled load process.
Check the master data lock.
Procedure for System Administration
I checked in SM12, I am the only user using this Infoobject. When I open Infopak it shown in SM12 myname and this Master Infoobject. When comeout from Infopak under that Infoobjects infosorce it shows no entries in SM12.
1)What is reason for getting locks?
2)How to solve this to get data into INFO OBJECT?
3)What mistakes I had done? Shall i run Infopak group? Please tell steps how to run that.
Please Give Helpful Tips.
Cheers,
Murali.

Hi dear,
the temporary lock you see when you are in the infopackage doesn't cause any problem...it's normal and avoid that any other user access into the same IP...
No matter with your issue during dataloading...
Try to re-run the extraction and look if your problem is still there...then check in SM21 to verify WHERE is your problem...
Hope it helps!
Bye,
ROberto

Changing Master data table keys

Hello,
I have a custom extractor (built by someone else)on R/3 that gets data from table HRP1001. This extractor contains data I need to implement "job relationships" for HR in BW.
I am trying to extract the data into a master data object on BW. One job in the HRP1001 table (OBJID on R/3) can have multiple relationships (or object types, OTYPE on R/3). However, since the key of the master data for 0JOB is just JOB, OBJVERS, and DATETO (and does not include OTYPE), the load fails due to duplicate records.
Since to modify the master data table for 0JOB would be an SAP mod, I created my own "Z" object from 0JOB. I have been manipulating the /BIC/M, /BIC/P and BIC/Q tables to try to adjust the key to include at least the OTYPE. I can successfully change the key of the Z object's master data to appear as I want it, but the new objects I added as keys are "flagged" after the load fails due to duplicate records. (Checks of each /BIC table are okay and activated changes. Also performed SE14 adjustment of each table)
So my questions are 1) does anyone know of a business content item that for storing this type of data that I have missed? and 2) If not, can anyone recommend how I can correctly modify the key fields of a master data object?
Any assistance is greatly appreciated.
Thank you,
Kelley

Hello Kelley,
If you want to enhance the key of your master data table, include the infoobject in compounding. All the infoobjects included in compounding will be included in the key of master data table.
Hope it helps.
Regards,
Praveen

Default Results Analysis Key in Internal Order Master Data

Hi Expert,
I would like to default specific Results Analysis Key in Internal Order Master Data.
Please advice is the any configuration can perform that?
Results Analysis Key is under Period-End Closing tab (Internal Order Master Data)
Thanks
regards,
ng chong chuan

HI
1. Go to T code KOM1 > Order Type would $$
2. CReate an Order and maintain default values in it like Comp code, etc and also the RA key
3. Now, maintain this model order in your Order Type in KOT2_OPA
4. Transport this customizing request across to all clients
BR,Ajay M

I have a problem in iPhone . When you receive a contact and press the key at the top to cancel the contact screen stopped working .ataml times after the last restart device

I have a problem in iPhone . When you receive a contact and press the key at the top to cancel the contact screen stopped working .ataml times after the last restart device

Since restarting did not help, reset your iPhone, see: Turn your iOS device off and on (restart) and reset http://support.apple.com/kb/ht1430
If that still does not solve it, check, if the contact you are trying to add is problematic. Try to save a different contact. Does that work?
If not, reinstall the Contacts app. This is only possible by restoring your iPhone, unfortunately.
See: Use iTunes to restore your iOS device to factory settings http://support.apple.com/kb/HT1414

Ovherhead key in cost center master data

Hi Friends
I am facing the issue on keeping overhead key in cost center master data. Is there any way to controll the screen of cost center master data? How do I assign a field on the screen of the cost center master data which is there in the cost center table (CSKS)
Thanks in advance

Hi,
You may be able to use:
Program Enhancements for Cost Center Master Data
    You can add own fields to the cost center master data. The following SAP
    enhancement is available for this purpose:
    COOMKS01 Cost Center: customer-specific additional fields in the master
    record
    This enhancement includes the following enhancement components:
    o   EXIT_SAPLKMA1_001
        CO-OM customer exit for PBO of customer-specific subscreen "0399" in
        SAPLKMA1.
    o   EXIT_SAPLKMA1_002
        CO-OM customer exit for PAI of customer-specific subscreen "0399" in
        SAPLKMA1.
Also see OSS notes:
379464
206306
Hope this helps
Siva

Join between fact table and master data table

Is it posible to join a Cube with a Characteristic? This is exactly what i need:
- In my cube i have date (0CALDAY) and (among others) a characteristic (ZCHAR) and a key figure (ZKEYF).
- I added a key figure (ZKFAT) as an attribute to ZCHAR. So the tables look something like this:
Fact table:
0CALDAY | ZCHAR | ZKEYF
12.10.2006 | CHAR1 | 10
12.10.2006 | CHAR2 | 20
12.10.2006 | CHAR3 | 30
Master data table for ZCHAR:
ZCHAR | ZKFAT
CHAR1 | 1000
CHAR2 | 2000
CHAR3 | 1500
I need to make a query with a table that looks like this:
0CALDAY | ZCHAR | ZKEYF | ZKFAT
12.10.2006 | CHAR1 | 10 | 1000
12.10.2006 | CHAR2 | 20 | 2000
12.10.2006 | CHAR3 | 30 | 1500
Finally, the query should result in something like this:
0CALDAY | ZKEYF | ZKFAT
12.10.2006 | 10 | 1000
12.10.2006 | 20 | 2000
12.10.2006 | 30 | 1500
Adding KFAT to the fact table is not an option, i need to read this information directly from ZCHAR.
I've tried using MultiProviders but didn't get the result i need.
Is there any way to achieve this? Please advice.
Thank you,

Thank you Ram C. i've tried your solution and it may be it, but i'm having one problem:
Since i'm reporting in web, i used the second solution you offered and almost got the desiered result. The problem is that some entries are correct but others ar duplicated! Using same example, my result table looks something like this:
0CALDAY | ZKEYF | Calculated KF (from ZKFAT)
12.10.2006 | 10 | 1000
12.10.2006 | 20 | 4000
12.10.2006 | 30 | 1500
Second row should be 2000, but instead it shows 4000. I added ZCHAR's attribute ZKFAT as a display attribute in order to compare the results. I found that the display attribute is correct (2000) but the Calculated KF still showed duplicated data (4000).
By the way, when i execute the query, i get this warning message:
"Calculated key figure ZRT_C02_2_CKF004 is not defined correctly"
Any ideas why this could be happening?
Thank you for your help.
Message was edited by: Gerardo Gaona

How are attribute and text master data tables linked in SAP R/3?

Hello,
how are attribute and text master data tables linked in SAP R/3?
Most tables with attribute master data like T001 for company codes,
have a text master data table T001T (add "T" to table name).
When looking at the content of table T001 via transaction se11,
the text are automatically joined.
But for some tables there is no "T"-table (e.g. table TVBUR for sales offices
has no text table TVBURT), but in se11 you get texts. There is an address
link in TVBUR, but the Name1, etc. are empty.
a) Where are the text stored?
b) How does the system know of the link?
Hope someone can help!
Best regards
Thomas

Hi Thomas
The master and text table are not linked by name, of course, if you see the text table, it has the same key fields of master table, only it has the field key spras and the field for description.
The link beetween the tables is done by foreign key: if you check the text table TVKBT u need to see how the foreign key for field VKBUR is done:
-> Foreing key with table TVBUR
-> Foreing key field type -> KEY FIELD FOR A TEXT TABLE
->Cardinality-> 1-:CN
It's very important the attribute sets for Foreing key field type, if it's KEY FIELD FOR A TEXT TABLE, it'll mean the table is a text table: i.e. that mean the master table is a check table for the text table, where the foreign key type is for text table.
U can find out the text table of master table by SE11: GoTo->Text Table
U can fined some information in table DD08L.
Max

Mismatch between Master data table /BIC/P and SID table /BIC/S

Hello All,
in our master data table we have logsys in key
after a system copy we had a problem with logsys name, when we have copied our bw prod system in test system we find prod logsys like value, the BDLS doesn't change all values for all structures and some master data table still have prod logsys instead of test logsys but some records have test logsys values
for example:
our production logsys is: BIP300 and our test logsys is BIT300
in our master data test table we find had some records logsys value like BIP300 and others with BIT300
all our ODS and CUBE have the right logsys value in test "BIT300"
we have developed an ABAP report to execute on selected tables to change logsys from BIP300 to BIT300
we execute the report on only P master data table like /BIC/PZCOOR and it's work fine and has changed all the records values
from BIP300 to BIT300 and this program has eliminated all duplicate records
the problem is when on our master data try to view data we find that bw return data from SID table /BIC/SZCOOR
in fact if we go to control data on /BIC/SZCOOR table we find that there still are records with logsys BIP300 and BIT300
and the same if we execute our query on ZCOOR we have values with BIP300 and BIT300
how should we fix this problem?
if we execute our ABAP report on /BIC/SZCOOR to change logsysname we can fix that or we could have problem?
please can give me some useful help
thanks a lot
Bilal

Hi ,
Follow the sequence of deletion .
1.Delete data from cube YMM_*
2.Delete data from 0pur_c*
3.Delete data from 0material .
4.Delete data from info_rec .
Best option would be do selective deletion for these four materials and run a repair request then after to update into data target.
Hope that helps.
Regards
Mr Kapadia

I have a key figure in my master data table i want to display the key figur

Similar Messages

Maybe you are looking for