I have a LAbview 8.6, and i can´t open a file from a Labview 5.1.1

             Hi,
             When i try to open a file(a driver to an OSA from Agilent) appears a error message, saying that the source´s version is too old(5.1.1), when my labview is 8.6.
             Anybody knows something about it?
             Thanks a lot.
Solved!
Go to Solution.
Attachments:
ag8614x.zip ‏2795 KB

carlosmayer wrote:
By the way, I am with the same problem again. If anybody has time and a version of Labview able to do this, I would be very grateful. The link is below.
The manufacturer's web site has a newer version of the driver for that instrument. It's not written all that well, but at least it uses VISA, unlike the VI you uploaded, which uses old GPIB functions. The library the manufacturer provides is in 5.1, which unfortunately you still cannot open in 8.6. Attached is the library in 8.2. For what it's worth, the VI you uploaded in 8.2 is also attached.
Attachments:
tslv01ae.vi ‏89 KB
Tsl-210.zip ‏197 KB

Similar Messages

I have a brand new MacBookProo and I can not open PDF files from my desktop. Can anyone help me with this please?

I have a brand new MacBookProo and I can not open PDF files from my desktop. Can anyone help me with this please?

A new Mac comes with 90 days of free tech support from AppleCare.
AppleCare: 1-800-275-2273

My new computer does not have iWeb and I can't open the files from the old computer. What can I do???

I'm really desperate. I used to publish to a blog directly from iWeb, then I discontinued it. When I made the switch to iCloud, I wasn't worried because I knew my files would always be there. However, once I got a new computer, I transferred all the old files to an external hard drive and I thought everything would work just fine. Well, it didn't Neither can I open iWeb nor can I find my files.
Can anyone help me please?

New Macs have not shipped with iWeb for over 2 years and Apple has not sold or supported iWeb for at least 2 years now - Apple stopped selling it and dropped support for it when MobileMe was ditched in favour of iCloud which does not offer hosting.
If you want iWeb, then you will need to have a look at your old installation CD's for your old Mac and see if iWeb is on these and you can then install it from there or if you don't have these CD's any longer, then you'll have no option but to purchase a copy of either iLife 09 or iLife 11 from Amazon - these boxed sets both contain iWeb 09, which is the latest version of iWeb.
Other than this and as you have not done your blog for sometime, perhaps you should consider re-creating it from scratch with a software that is actively supported and updated - that is NOT iWeb any longer.
You could try using WordPress, either .com or .org - .org is good if you already have hosting and you can install WordPress directly onto your server. If you want something free, then you could use WordPress.com which is then published on the WordPress servers.
You could also take a look at EverWeb from Rage Software, which is very new and is very like iWeb with all the extras, such as drop down menus etc. Take a look at http://www.everwebapp.com.
As for your files, it sounds that when you say files, these might be the published files for your site, if you went into iWeb and published them to a local folder? This is not a backup and even if you could find these files, then iWeb will not be able to open them because it has no import facility, so cannot open an already published site - html and css files.
What you need is your domain.sites files which can be found under your User Library/Application Support/iWeb/domain.sites.
I would cut your losses and if you don't have iWeb, then don't bother paying for software that is now outdated and unsupported - move onto to something new and re-create everything in either WordPress or EverWeb.

Hi. I have a Dell PC running Windows 7 64 bit. I have the latest version of Adobe Reader, It worked yesterday. Today I have job training to do that is due tomorrow morning and I can't open PDF files. I have to open a guide and read it and take a test

Hi. I have a Dell PC running Windows 7 64 bit. I have the latest version of Adobe Reader, It worked yesterday. Today I have job training to do that is due tomorrow morning and I can't open PDF files. I have to open a guide and read it and take a test tomorrow. I have deleted and reinstalled the application. I have rebooted. I have made sure my PDF's are associated with the program. Every PDF on my computer won't open and I get the same error message. It simply says Attempt to access invalid address. How can I fix this? Thanks.

Hi Don,
I have seen this issue fixed for some users by modifying the following registry key:
The key is "HKLM\System\CurrentControlSet\Control\Session Manager\Memory Management" MoveImages
Set the key to 1 instead of 0 then reboot the machine.
In case you still face the issue try the following registry key change:
The only thing you have to do is rename the following key at the REGEDIT, and everything will be fine !!
BEFORE:
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Image File Execution Options\iexplore.exe
AFTER:
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Image File Execution Options\iexplore.old
Note: Please take a backup of the registry before attempting this change.
Regards,
Rave

The photos in my IPhoto have all become mini-thumbnails and I can't open or edit them. When I print the image it comes out normal size. How do I get the thumbnails back to the standard size and be able to work with them?

The photos in my IPhoto have all become mini-thumbnails and I can't open or edit them. When I print the image it comes out normal size. How do I get the thumbnails back to the standard size and be able to work with the photo files?

What version of iPhoto and system are you running? On the guess that you're running the latest iPhoto, 9.4.2, Try the following:
1 - launch iPhoto with the Command+Option keys held down and rebuild the thumnails, Option #2.
2 - It may take 2-3 attempts so don't give up after only one attempt.
OT

I have a new Mark3 D 5, I can't open Raw files

I have a new Mark3 D 5, I can't open Raw files I've shot in LR 3, I read I would be able to in LR 4 or 5. Because my mac is 10.6.8 I prefer to get LR 4 so I don't have to also update my operating system. Will LR 4 open my rw files in Mark3 D5. What about my older files in LR 3 will I loose the catalogs when I do this?

Thanks John, I ordered the software from Adorama and I'm expecting it today. I did use a DNG converger, I found it kind of slow, maybe thats because of the file size.
I'm curious to see if the conversion files will look the same as the direct raw files I'm used to seeing in Lightroom. It'll be good to compare. While waiting I looked at the files in Digital Photo Professional and the files looked incredible. I was able to open one at a time in PS but in TIFF format. Not the most practical but impressive. I'm loving the D5 Mark 111
after one go at it.

I can't open pages files from USB and iCloud due to : "The necessary file index.xml is missing".

I can't open pages files from USB and iCloud due to : "The necessary file index.xml is missing". Original file is written on iMac (2014) and saved to an USB stick and then transferred till macBook Pro (2009, Yosemite) for editing. Then I shared the files by iCloud but I am not able to open them on iMac again. Niether can I use the USB stick to transfer the edited files back. I'm running Pages '09 4,1 (923) on the macBook and Pges 5.5.2 (2120) on the iMac.
Håkan

Pages 5.5.2 is extremely incompatible with even other Macs let alone the vast majority of PC and MsWord users out there, so not a good idea to leap into the fire with both eyes shut.
After having done that to the first Pages 5 files, Apple has repeatedly done it to even the most minor point updates. Apple can't even anticipate its own erratic changes let alone what everyone else needs doing.
Peter

I'm going back to cs4 after using cs6 and I can't open nef files in camera raw.

I'm going back to cs4 after using cs6 and I can't open nef files in camera raw.

Each camera needs a specific camera raw version (ACR). And each ACR is tied to a specific version of PS. See this list http://helpx.adobe.com/creative-suite/kb/camera-raw-plug-supported-cameras.html

I'm using iphone 4S, and I can not open PDF file only from my husband email that using Mic outlook. It was very weird because I can received other email with pdf file from other people. can someone help.

I'm using iphone 4S and ipad mini, and I can not open PDF file only from my husband email that using Mic outlook. It was very weird because I can received other email with pdf file from other people. Can someone help...
Thanks in advance

Hi Eidda,
This may because the attachment is a winmail.dat file. I would recommend taking a look at the article below for more information. Note: the article is written for OS X mail, but does also apply to this situation.
Mac OS X Mail: What is a winmail.dat attachment?
http://support.apple.com/kb/HT2614
-Griff W.

Do any of you experience Im having with my ipad? I can't make a comment in Facebook for older posts and I can't open numerous comments from old posts of my friends. but everything works perfectly when I use laptop. is there problem between apple and FB?

do any of you experience Im having with my ipad? I can't make a comment in Facebook for older posts and I can't open numerous comments from old posts of my friends. but everything works perfectly when I use my laptop(non-apple). is there problem between apple and FB?

Facebook apparently has their site coded poorly for tablets with touch screens. Try using the Facebook app. It is not perfect either but it is better than view in a browser lately.

InDesign Crashed and Now Can't Open the File It Crashed On

I had a file open from a G4 server. I left and came back and my computer had gone to sleep losing the connection to the server. InDesign crashed with that file open and now I can't open the file at all I keep getting this error message:
Cannot open the document [document name]. You may not have permission or the document may be open already. For multi-user access, close the file and then lock it using the File > Get Info command in the Finder.
The document is not open, on the server I forced the permissions to be all read and write for everyone, I dumped my InDesign preferences. What else can I do? Has anyone had this problem before? (I am connected to the server now that I'm trying to reopen it.)
When I started InDesign after it crashed, it asked me to recover the file and I tried to but it didn't open anything (I was not connected to the server at that point which may have screwed things up) There are two files in the InDesign Recovery folder one called 'RecoveryData' and one called 'DBTmp239689402256' both of which don't open in indesign.

You may want to back up your work on a regular basis. Check out Retrospect or Retrospect Light. Lots of computers come with the light version so you may already have it.

I worked on a trial of LR 5 on a catalog and now can't open my files in my LR4 after the trial has expired. How do I access my catalog now?

I upgraded my LR4 catalog for a trial LR5 and now can't open my original LR4 catalog. What do I do to open my files?

It sounds as if you are using the Lightroom 5 version from the creative cloud, and you don't have a subscription. The Lightroom behavior you are describing is what happens when you don't have an active creative cloud subscription. Upgrading catalogs from Lightroom 4 to Lightroom 5 does not do anything to the original catalog if you can find and start Lightroom 4, you should be able to start right where you left off. But any new files that you imported into Lightroom 5 will not be there. They will be on your hard drive and you can import them again. But you are going back to a catalog that was used up until you installed Lightroom 5. Hopefully, you didn't uninstall Lightroom 4.

IPhoto updated and I can't open the files on my old computer

I tried to have all my information flow from my old computer to the new computer. Somewhere in the move my IPhoto program was updated and now I can't open that file on my old computer. I have deleted my old IPhoto preference pane under user, but I am unable to even find what update is now on my old computer. I found the preference pane had gone into a file folder for another program. I need to get the IPhoto folder corrected because I need to completely clear the info on the new computer, reload the original bundle and then try to move everything again. I hate to do all of this if I can't get the pictures moved somewhere that I can find them. ALSO - I can't find the photos on my new computer.

Librarian
Welcome to the Apple user to user assistance forums
You should have an iPhoto program in the applications folder of your old computer and one in the applications folder of your new computer - please select each of those and report what version they are
And you should have an iPhoto library in the pictures folder of each computer - do you?
When you launch iPhoto on the old computer what does it say?
When you launch iPhoto on the new computer what does it say?
I need to completely clear the info on the new computer, reload the original bundle and then try to move everything again
Why do you need to do this?
LN
Message was edited by: LarryHN

I have 37.0.2 verssion and still can't open links from my gmail. Please help.

After upgrading Firefox to the latest version 37.0.2 I can't open any hyperlinks neither from my gmail or other websites. Could you help me please?

'''Try Firefox Safe Mode''' to see if the problem goes away. [[Troubleshoot Firefox issues using Safe Mode|Firefox Safe Mode]] is a troubleshooting mode that temporarily turns off hardware acceleration, resets some settings, and disables add-ons (extensions and themes).
'''If Firefox is open,''' you can restart in Firefox Safe Mode from the Help menu:
* Click the menu button [[Image:New Fx Menu]], click Help [[Image:Help-29]] and select ''Restart with Add-ons Disabled''.
'''If Firefox is not running,''' you can start Firefox in Safe Mode as follows:
* On Windows: Hold the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
* On Mac: Hold the '''option''' key while starting Firefox.
* On Linux: Quit Firefox, go to your Terminal and run ''firefox -safe-mode'' (you may need to specify the Firefox installation path e.g. /usr/lib/firefox)
When the Firefox Safe Mode window appears, select "Start in Safe Mode".
;[[Image:SafeMode-Fx35]]
'''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, theme, or hardware acceleration. Please follow the steps in the [[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]] article to find the cause.
''To exit Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
When you figure out what's causing your issues, please let us know. It might help others with the same problem.

I have installed adobe flash player. I can not open the file. In plugins under tools it is not showing. It shows acrobat reader being there but not flash player. Any ideas?

Flasher Player should be listed as a plugin in tools for it to work?

'''Other items that need your attention'''
The information submitted with your question indicates that you have out of date plugins with known security and stability issues that should be updated. To see the plugins submitted with your question, click "More system details..." to the right of your original question post. You can also see your plugins from the Firefox menu, Tools > Add-ons > Plugins.
*Adobe Shockwave for Director Netscape plug-in, version 11.0
**Several security issues have been fixed since the version you are using
*Adobe PDF Plug-In For Firefox and Netscape 8.2.2
**'''Very old version'''; you seem to have missed the entire version 9 series
**New Adobe Reader X (version 10) with Protected Mode just released 2010-11-19
**See: http://www.securityweek.com/adobe-releases-acrobat-reader-x-protected-mode
*Next Generation Java Plug-in 1.6.0_19 for Mozilla browsers
**4 versions behind; several security issues have been fixed
#'''Check your plugin versions''': http://www.mozilla.com/en-US/plugincheck/
#*'''Note: plugin check page does not have information on all plugin versions'''
#'''Update Shockwave for Director'''
#*NOTE: this is not the same as Shockwave Flash; this installs the Shockwave Player.
#*Use Firefox to download and SAVE the installer to your hard drive from the link in the article below (Desktop is a good place so you can find it).
#*When the download is complete, exit Firefox (File > Exit)
#*locate and double-click in the installer you just downloaded, let the install complete.
#*Restart Firefox and check your plugins again.
#*'''Download link and more information''': http://support.mozilla.com/en-US/kb/Using+the+Shockwave+plugin+with+Firefox
#'''Update Adobe Reader (PDF plugin):'''
#*From within your existing Adobe Reader ('''if you have it already installed'''):
#**Open the Adobe Reader program from your Programs list
#**Click Help > Check for Updates
#**Follow the prompts for updating
#**If this method works for you, skip the "Download complete installer" section below and proceed to "After the installation" below
#*Download complete installer ('''if you do NOT have Adobe Reader installed'''):
#**Use the links below to avoid getting the troublesome "getplus" Adobe Download Manager and other "extras" you may not want
#**Use Firefox to download and SAVE the installer to your hard drive from the appropriate link below
#**Click "Save to File"; save to your Desktop (so you can find it)
#**After download completes, close Firefox
#**Click the installer you just downloaded and allow the install to continue
#***Note: Vista and Win7 users may need to right-click the installer and choose "Run as Administrator"
#**'''Download link''': ftp://ftp.adobe.com/pub/adobe/reader/
#***Choose your OS
#***Choose the latest #.x version (example 9.x, for version 9)
#***Choose the highest number version listed
#****NOTE: 10.x is the new Adobe Reader X (Windows and Mac only as of this posting)
#***Choose your language
#***Download the file, SAVE it to your hard drive, when complete, close Firefox, click on the installer you just downloaded and let it install.
#***Windows: choose the .exe file; Mac: choose the .dmg file
#*Using either of the links below will force you to install the "getPlus" Adobe Download Manager. Also be sure to uncheck the McAfee Scanner if you do not want the link forcibly installed on your desktop
#**''Also see Download link''': http://get.adobe.com/reader/otherversions/
#**Also see: https://support.mozilla.com/en-US/kb/Using+the+Adobe+Reader+plugin+with+Firefox (do not use the link on this page for downloading; you may get the troublesome "getplus" Adobe Download Manager (Adobe DLM) and other "extras")
#*After the installation, start Firefox and check your version again.
#'''Update the [[Java]] plugin''' to the latest version.
#*Download site: http://www.oracle.com/technetwork/java/javase/downloads/index.html (Java Platform: Download JRE)
#*Also see "Manual Update" in this article: http://support.mozilla.com/en-US/kb/Using+the+Java+plugin+with+Firefox#Updates
#* Removing old versions (if needed): http://www.java.com/en/download/faq/remove_olderversions.xml
#* Remove multiple Java Console extensions (if needed): http://kb.mozillazine.org
#*Java Test: http://www.java.com/en/download/help/testvm.xml

I have a LAbview 8.6, and i can´t open a file from a Labview 5.1.1

Similar Messages

Maybe you are looking for