I have a large number of contacts in my Outlook account.  As long as that account is active on the iPhone (6 ) the contact are available on the phone but disappear when that account is removed from the phone.  How do I transfer the contacts?

I have a large number of contacts in my Outlook account.  As long as that account is active on the iPhone (6 ) the contact are available on the phone but disappear when that account is removed from the phone.  How do I transfer the contacts permanently to the phone?

Archive the contacts you have in Address book, then delete them, they will be removed from iCloud as well. Restore the archive

Similar Messages

  • I recently got the iPhone 4s, but my iPod has a lot of apps with a lot of data on them and don't want to start over. I already synced my iPhone from the computer that had all my apps from my iPod, how do i transfer the data over, the other apps did.

    I recently got the iPhone 4s, but my iPod has a lot of apps with a lot of data on them and don't want to start over. I already synced my iPhone from the computer that had all my apps from my iPod, how do i transfer the data over, the other apps did. But some reason the app Clash Of Clans did not. Thank you.

    If I wiped my phone I wouldn't have the contacts on my phone to send to my self.    I would need to take just the contacts from my back up. I would have to do this through iTunes and I don't see how I can just extract the contacts only from my back up. From what I can figure out it is all or nothing

  • When I zoom in on photo using iPhoto, how can I save the zoomed in photo please?  This always looks better than cropping., When I zoom in on photo using iPhoto, how can I save the zoomed in photo please?  This always looks better than cropping.

    When I zoom in on photo using iPhoto, how can I save the zoomed in photo please?  I would like a screen shot of my zoomed in photo - is this possible?.  Cropping doesn't give the same effect as zooming in and magnifying the photo.  Any help would be appreciated thank you.  I have an iMac

    To take a screenshot of the zoomed photo, press either the key combination
         ⇧⌘3   for a screenshot of the full screen, or
         ⇧⌘4   to bring up a selection rectangle: select the section of the screen, that you want to save.
    The screenshots will be sent to your desktop; drag them from there to the iPhoto icon in the Dock to import them.

  • HT1386 If I have a library of music on my ipod but just got a separate itunes for my new computer, how can i transfer the music from my ipod onto my new account?

    I got a new itunes account on my new computer. My ipod has all the music from my previous account. I would like to transfer the music from my ipod to my new account. Is this possible?

    Hello hevcheer,
    Thanks for using Apple Support Communities.
    For more information on this, take a look at:
    You can sync purchases from a ipod to computer.
    iTunes Store: Transferring purchases from your iOS device or iPod to a computer
    http://support.apple.com/kb/HT1848
    Purchases cannot be transferred from account to account.
    Best of luck,
    Mario

  • The vast majority of my iPod music was not purchased from iTunes. How can I transfer the music from my iPod to my new MacBook?

    Most of my music on my iPod was not from iTunes and I need to transfer it to my new MacBook Pro. Anyone know how, preferably without spending money?

    http://lifehacker.com/5837978/how-can-i-transfer-music-from-my-ipod-or-iphone-to -my-computer
    http://www.geek.com/articles/apple/how-to-transfer-music-from-an-ipod-to-the-com puter-2011081/

  • I have an U.S store account but i recently bought a gift card from switzerland. How do i make the gift card work on the US iTunes store

    Hello,
    I currently have a US iTunes Store account. But recently due to some circumstances i have got a Switzerland gift card. So when i type in the code it says "Your iTunes Store (U.S) does not match the gift certificate (Swiss)" how can i resolve this problem?
    Thanks in advance,
    BrainStorme

    I travel to the UK a lot and have purchased UK ITunes cards.  The only way that you can use a foreign card such as yours is if you have an acct based in Switzerland.  Now here's the problem with that, you have to also have a credit card that has a Swiss address that you can log into.  Without this they will not let you use the cards.  

  • I have the iPhone 4 and now the ipad2.  They are linked thru iCloud but now when I send a message from my phone it shows as coming from my email.  Can I change this so it shows up with my phone number again?

    Please help!

    You cannot update iPhone 4 to IOS 8.1.2, the highest you can update is IOS 7.1.2.
    Unless you've iPhone 4S (looks similar to iPhone 4)

  • HT201210 feeling a little lost. i was updating to new phone software now phone has gone back to new mode. it recognises my phone but wont allow me to ststem backup from itunes as it does not like the passwords i use as it says system restore already done

    having problems with passwords since i upgraded software on itunes as phone gone back to configure mode but wont allow to restore from back up in itunes as it does not like passwords i use. any ideas to solve?

    unhappy@apple wrote:
    but t say's that it will delet all the my stuff i have on their, can i get some other way?
    Not if it is in Recovery mode.
    -> http://support.apple.com/kb/HT1808
    You can restore from backup.
    -> http://support.apple.com/kb/HT1766

  • I need to work on an iMovie I already started on one Mac, but want to finish it on my new Mac. How can I transfer the movie and not lose any formatting?

    What do I do?

    Hi
    You need an external hard disk to do this.
    (No I don't think USB-memory will do)
    • Should be a FireWire one (as USB/USB2 performs badly to me)
    • MUST BE - Mac OS Extended formatted - UNIX/DOS/FAT32/Mac OS Exchange will not work for VIDEO
    All moving of Projects and Events - MUST be done Within iMovie application - NOT on DeskTop/Finder (else a great risk that iMovie loses track of them and You get a project that do not work OK)
    • In iMovie Project window - Move over Project over to the New External Hard Disk - And it will ask if You want a Copy (I would)
    • If Event's is not moved - Then in Events window - move the needed ones over too
    Now - If You used Photos and Audio from iPhoto or iTunes or from folder on Mac - then copy this over too. So that You've got all needed material copied to tne new ext. HD.
    Then connect it to Your other Mac and move things wher You want them to be.
    Yours Bengt W

  • I have 2 imac computers and here are my questions: first, how to I transfer the information from my contact directory from my old imac into my new imac and once the information is transfered how can I print it? Second: I have a large music collection in m

    have 2 imac computers and here are my questions: first, how to I transfer the information from my contact directory from my old imac into my new imac?  Once the information is transfered how can I print it? Second: I have a large music collection in my old Imac computer how do I transfer this information to my new computer? Also how can I share this information with other computers at home?

    I think you may find helpful information here:
    A Basic Guide for Migrating to Intel-Macs
    The Knowledgebase article Intel-based Mac: Some migrated applications may need to be updated refers to methods of dealing with migrating from PowerPC chips to Intel with the Migration Assistant safely. The authors of this tip have not had a chance to verify this works in all instances, or that it avoids the 10.6.1 and earlier Guest Account bug that caused account information to get deleted upon use of the Migration/Setup Assistant. However, a well backed up source that includes at least two backups of all the data that are not connected to your machine will help you avoid potential issues, should they arise. In event it does not work, follow the steps below.
    If you are migrating a PowerPC system (G3, G4, or G5) to an Intel-Mac be careful what you migrate.  Keep in mind that some items that may get transferred will not work on Intel machines and may end up causing your computer's operating system to malfunction.
    Rosetta supports "software that runs on the PowerPC G3, G4, or G5 processor that are built for Mac OS X". This excludes the items that are not universal binaries or simply will not work in Rosetta:
    Classic Environment, and subsequently any Mac OS 9 or earlier applications
    Screensavers written for the PowerPC System Preference add-ons
    All Unsanity Haxies Browser and other plug-ins
    Contextual Menu Items
    Applications which specifically require the PowerPC G5 Kernel extensions
    Java applications with JNI (PowerPC) libraries
    See also What Can Be Translated by Rosetta.
    In addition to the above you could also have problems with migrated cache files and/or cache files containing code that is incompatible.
    If you migrate a user folder that contains any of these items, you may find that your Intel-Mac is malfunctioning. It would be wise to take care when migrating your systems from a PowerPC platform to an Intel-Mac platform to assure that you do not migrate these incompatible items.
    If you have problems with applications not working, then completely uninstall said application and reinstall it from scratch. Take great care with Java applications and Java-based Peer-to-Peer applications. Many Java apps will not work on Intel-Macs as they are currently compiled. As of this time Limewire, Cabos, and Acquisition are available as universal binaries. Do not install browser plug-ins such as Flash or Shockwave from downloaded installers unless they are universal binaries. The version of OS X installed on your Intel-Mac comes with special compatible versions of Flash and Shockwave plug-ins for use with your browser.
    The same problem will exist for any hardware drivers such as mouse software unless the drivers have been compiled as universal binaries. For third-party mice the current choices are USB Overdrive or SteerMouse. Contact the developer or manufacturer of your third-party mouse software to find out when a universal binary version will be available.
    Also be careful with some backup utilities and third-party disk repair utilities. Disk Warrior, TechTool Pro , SuperDuper , and Drive Genius  work properly on Intel-Macs with Leopard.  The same caution may apply to the many "maintenance" utilities that have not yet been converted to universal binaries.  Leopard Cache Cleaner, Onyx, TinkerTool System, and Cocktail are now compatible with Leopard.
    Before migrating or installing software on your Intel-Mac check MacFixit's Rosetta Compatibility Index.
    Additional links that will be helpful to new Intel-Mac users:
    Intel In Macs
    Apple Guide to Universal Applications
    MacInTouch List of Compatible Universal Binaries
    MacInTouch List of Rosetta Compatible Applications
    MacUpdate List of Intel-Compatible Software
    Transferring data with Setup Assistant - Migration Assistant FAQ
    Because Migration Assistant isn't the ideal way to migrate from PowerPC to Intel Macs, using Target Disk Mode, copying the critical contents to CD and DVD, an external hard drive, or networking will work better when moving from PowerPC to Intel Macs.  The initial section below discusses Target Disk Mode.  It is then followed by a section which discusses networking with Macs that lack Firewire.
    If both computers support the use of Firewire then you can use the following instructions:
    1. Repair the hard drive and permissions using Disk Utility.
    2. Backup your data.  This is vitally important in case you make a mistake or there's some other problem.
    3. Connect a Firewire cable between your old Mac and your new Intel Mac.
    4. Startup your old Mac in Transferring files between two computers using FireWire.
    5. Startup your new Mac for the first time, go through the setup and registration screens, but do NOT migrate data over. Get to your desktop on the new Mac without migrating any new data over.
    If you are not able to use a Firewire connection (for example you have a Late 2008 MacBook that only supports USB:)
    1. Set up a local home network: Creating a small Ethernet Network.
    2. If you have a MacBook Air or Late 2008 MacBook see the following:
    MacBook (13-inch, Aluminum, Late 2008) and MacBook Pro (15-inch, Late 2008)- What to do if migration is unsuccessful;
    MacBook Air- Migration Tips and Tricks;
    MacBook Air- Remote Disc, Migration, or Remote Install Mac OS X and wireless 802.11n networks.
    Copy the following items from your old Mac to the new Mac:
    In your /Home/ folder: Documents, Movies, Music, Pictures, and Sites folders.
    In your /Home/Library/ folder:
    /Home/Library/Application Support/AddressBook (copy the whole folder) /Home/Library/Application Support/iCal (copy the whole folder)
    Also in /Home/Library/Application Support (copy whatever else you need including folders for any third-party applications)
    /Home/Library/Keychains (copy the whole folder) /Home/Library/Mail (copy the whole folder) /Home/Library/Preferences/ (copy the whole folder) /Home /Library/Calendars (copy the whole folder) /Home /Library/iTunes (copy the whole folder) /Home /Library/Safari (copy the whole folder)
    If you want cookies:
    /Home/Library/Cookies/Cookies.plist /Home/Library/Application Support/WebFoundation/HTTPCookies.plist
    For Entourage users:
    Entourage is in /Home/Documents/Microsoft User Data Also in /Home/Library/Preferences/Microsoft.
    Credit goes to Macjack for this information.
    If you need to transfer data for other applications please ask the vendor or ask in the  Discussions where specific applications store their data.
    5. Once you have transferred what you need restart the new Mac and test to make sure the contents are there for each of the applications.
    Written by Kappy with additional contributions from a brody.Revised 5/21/2011

  • I have an app in my App Store under updates under purchased that I'd like to get removed from my phone. How do I do that?

    I have an app in my App Store under updates under purchased that I'd like to get removed from my phone. How do I do that?

    In the Home screen, tap and hold the app until it wiggles. Then tap the minus red icon placed in the top of the icon. Deleted

  • TS1702 it says that i have to pay again to download a game from itunes.. how can i get the game in my itunes and phone? do I accept the charges and it will be re-embersed? what should I do? I have the order confirmation number etc. if you need.

    it says that i have to pay again to download it from itunes.. how can i get the game in my itunes and phone? do I accept the charges and it will be re-embersed? what should I do? I have the order confirmation number etc.

    Contact iTunes Customer Service and request assistance
    Use this Link  >  Apple  Support  iTunes Store  Contact

  • I have a large number of photos imported into iPhoto with the dates wrong.  How can I adjust multiple photos (with varying dates) to the same, correct, date?

    I have a large number of photos imported into iPhoto with the dates wrong.  How can I adjust multiple photos (with varying dates) to the same, correct, date?

    If I understand you correctly, when you enter a date in the Adjust Date and Time window, the picture does not update with the date you enter.  If that is the case then something is wrong with iPhoto or your perhaps your library.
    How large a date change are you putting in?  iPhoto currently has an issue with date changes beyond about 60 years at a time.  If the difference between the current date on the image and the date you are entering is beyond that range that may explain why this is not working.
    If that is not the case:
    Remove the following to the trash and restart the computer and try again:
    Home > Library > Caches > com.apple.iphoto
    Home > Library > Preferences > com.apple.iPhoto (There may be more than one. Remove them all.)
    ---NOTE: to get to the "home > library" hold down option on the keyboard and click on "Go" > "Library" while in the Finder.
    Let me know the results.

  • I want to make all my caller id pics full screen how do i do that? When i download a picture from my phone it makes it full screen then it goes back to the small photo in the upper right hand corner how do i make them stay full screen help please:-)

    I want to make all my caller id pics full screen how do i do that? When i download a picture from my phone it makes it full screen then it goes back to the small photo in the upper right hand corner how do i make them stay full screen help please:-)

    @Naiks, having suffered through unsuccessful synching attempts for Calendar and Contacts myself, l would suggest you try the following:
    UNINSTALL iCloud control panel from your PC. Seems silly, but do it.
    Go into Outlook, and look at the very top menu. Click FILE, then ACCOUNT SETTINGS, then click the popup box.
    You will see a list of all your email accounts. Make sure that ONE of them has a checkmark against it. If not, select the account your want as your default, and click "set as default.
    Exit out of Outlook and reboot your machine.
    Now reinstall iCloud, check CALENDAR and CONTACTS, and do as instructed when prompted.
    Reboot for good luck and now launch OUTLOOK. All that remains is to locate your iCloud Contacts and Calendar files, and make them your default.
    IMPORTANT: Don't panic if you can't find your contacts -- they're there. Click CONTACTS and you'll see you have several available contact files. Locate the one label "iCloud" in grey type. Right-click on it, select PROPERTIES, then click the Outlook Address Book tab. Check the box that says something like "Make this my default Outlook Address Book." Keep clicking "apply" and "okay" until you've exited out of the dialog box maze.
    You may have to do something similar with your Calendar files. I dd not, but if you need to, do it.
    Everything should now sync pretty seamlessly.
    I didn't have the exact same problem as you, but my dilemma was close enough. Good luck!
    Arthur P. Johnson

  • I have a power pc (g5) computer that I will soon be replacing with a current i5 or i7 mini. How do I transfer the Time Machine files from the internal hard drive on the G5 to an external drive that I will later use with the Mini?

    I have a Power PC G5 computer that I will soon be replacing with a current i5 or i7 Mini. How do I transfer the Time Machine files from the internal hard drive on the G5 to an external drive that I will later use with the Mini?

    Hi, likely the easiest is to just poll the drive & get something like this...
    Get MacScan...
    http://www.apple.com/downloads/macosx/networking_security/macscan.html
    http://eshop.macsales.com/item/NewerTech/U3NVSPATA/
    But if you have a good external drive already, just clone it.
    Get carbon copy cloner to make an exact copy of your old HD to the New one...
    http://www.bombich.com/software/ccc.html
    Or SuperDuper...
    http://www.shirt-pocket.com/SuperDuper/

Maybe you are looking for

  • What to do if Windows displays an "iTunes.exe - Corrupt File" message

    Greetings fellow Podders, Resident Furball here... It is about time that I produced a single post for all the chkdsk issues that we've been discussing since November 2004. The Apple KB article seems to cover the major points succinctly, but we need t

  • Could not get IOR from Domino Server while provisioning Lotus Notes

    Hi all, There are two servers that have OIM installed, development server and test server. From development server, we can provision to Lotus Notes just fine. But for test server everytime when provision to Lotus Notes. There will be an exception Not

  • IPad as second monitor for mac.

    Hi, All. As I work on Aperture designing a large book in landscape format it occurred to me that it would be helpful to have a second monitor. My idea was to free the primary monitor for the display of the book layout and have the different palettes

  • Problems copying files to iCloud

    I have two Macs. Both running Yosemite (10.10). One of my Macs is a MacBook Air – for when I am on the road – the other is a 27inch iMac, for when I am in the studio. On the MacBook AirWhen I save files to my iCloud drive they are uploaded to my remo

  • Disable VA02 condition when PGI

    Hi All, Could anyone of you please tell me how to make the condition view to be in display-only mode even in VA02 after PGI has occurred? In our SAP, when user create delivery order, user cannot modify previous conditions in VA02 but can add new cond