I have a late 2008 Macbook Pro, I am trying to run MW3 but it will not work without crashing a few minuets into the game. The general specs on my computer are a dual processor 2.53 ghz. 4 gb ram and a NVIDIA geforce 9400 (9600 is the alternate card)

I have a late 2008 Macbook Pro, I am trying to run MW3 but it will not work without crashing a few minuets into the game. The general specs on my computer are a dual processor 2.53 ghz. 4 gb ram and a NVIDIA geforce 9400 (9600 is the alternate card).
Things to note:
I have been unable to update firmware on this computer for about a year now. Im not sure why.
I am running a bootleg copy of Windows XP on this computer, I would not like to spend $149 to get Windows 7 if possible.
any thoughts on the matter would be greatly appreciated, thank you.

Why don't you take your 'old' MBP into your local Apple Store and have them check out everything that's wrong with it - and I mean everything? Then, when you get an estimate about how much it would cost to get the machine completely repaired, ask about the Apple flat-rate repair pricing?
It's worth a shot - and with what you may save, you can put in the bank for a new MBP.
Clinton

Similar Messages

  • I have a late 2008 Macbook Pro last updated to Mavericks OS.  The screen died and it's not worth replacing.  How do I remove the hard drive and use a drive sled to access info I need?

    I have a late 2008 Macbook Pro last updated to the Mavericks OS.  The screen died and I took it into an Apple store and was told replacing the screen and the hardware to repair everything would cost almost as much as buying a new laptop or a cheaper model.  I was told that I can use a drive sled to access data I need on my hard drive. How do I remove my hard drive and use a drive sled to get to the information I need?  What makes matters more complicated is I need to update my iPhone and my iTunes/App store purchases.  How can I accomplish this?
    My wife has a late 2008 Macbook Pro as well, which I am assuming I need to run my hard drive.  Is there a way to just access just my hard drive without interfering with hers?
    I know this is lengthy.  Thanks to whoever looks at this and offers advice/instruction.

    the device you need is an External enclosure for a 2.5" (laptop form factor) SATA drive.
    A USB-interface enclosure will be slow, but is adequate for this task and for re-purposing as a backup drive later.  A firewire-interface drive would be faster, but is harder to find, more expensive, and faster than needed for this purpose.
    The drive will mount as an "extra" drive on your wife's Macbook, and you can drag and drop whatever you wish. You could create a separate Account for yourself on her computer, and use Migration Assistant or just copy your stuff over to the new account. Then it would not interfere with her files.

  • How many hours does a brand new battery last after fully charged. I have a late 2008 Macbook Pro.

    How many hours does a brand new battery last after fully charged. I have a late 2008 Macbook Pro.

    clintonfrombirmingham is right, there is no way to exactly tell. But from personal experience, a new battery on a 2008 will last for about 2 1/2 hours with a higher screen brightness and doing something taxing to the battery (like gaming or running lots of 3D programs). But if you're just listening to music with the brightness all the way down, and no programs running, you could get up to 12 hours. So for average use, it should last you a whole business day (assuming you don't use it more than 30% 0f the time). Hope this kind of gives you more of an idea of what to expect:)

  • I have a late 2008 macbook pro with a 2.4 GHz Intel Core 2 Duo processor and 2 GB 1067 MHz DDR3 memmory. Its starting to lag and is generally getting a little slow. It's running Mac OS X Lion 10.7.5. How can i "update" it or just improve it's efficiency?

    help

    zibiva,
    depending upon what you use your Late 2008 Aluminum MacBook for, you could increase your RAM from 2 GB to 4 GB or 8 GB; you could replace its hard disk drive with a SSD; and/or you could examine what software is currently in regular use, to see if any of those apps is contributing to the slowdown. If you haven’t done so already, you could download and install EtreCheck, and include the output from running EtreCheck in your reply, to see if anything there stands out as being particularly CPU- or RAM-intensive.

  • Late 2008 Macbook Pro: Which power adapter?

    Hello all. I have a Late 2008 Macbook Pro 15", MacPro5,1. A few months back my dog ate the power adapter (unplugged, thankfully.) I thought I did the proper amount of research to order the correct adapter from a third party on Amazon, because I'm pretty darn broke and need to save every penny I can. When I got the adapter, the connector was different from the one that came with my Macbook Pro. It was 85W, all the numbers matched up, but the style was different. But, the plug worked enough to let me get the work done that I needed, so it didn't concern me too much.
    That is, until this cord just stopped working. That's what I get for getting a third party cable from China off Amazon.
    So now, I'm trying to research again to make sure I'm getting the right cable, and I want one that's made by Apple, and is exactly like the one that came in the box when I bought my Macbook Pro new. I went to MacSales.com and checked their compatibility pages, and ran into some issues. What is showing as compatible with my Mac is the 85W Magsafe MC556LL/A, but this is shown with the incorrect connector (like the one I got off Amazon.)
    When I looked at the other adapters that were available, I found the MagSafe 2 85W MD506LL/A, which has a connector that looks like the original, but it only shows as compatible with 2012+ Retina Display Macbook Pros.
    So, do I have to buy the MagSafe that is not like the original that came with my Macbook Pro, or can I get the MagSafe 2 that does match what I got out of the box?
    Reference pages from MacSales.com:
    http://eshop.macsales.com/item/Apple/MC556LLA/
    http://eshop.macsales.com/item/Apple/MD506LLA/

    Thanks! I didn't realize there was a revision, but that makes sense. I guess I don't understand they would change it, then use the original design for the later Retina Display models. Oh well, as long as it works!
    On a similar note, is OWC the best option for a cheap Apple-brand adapter? They're selling them for $47, when the cheapest I can find anywhere else is like $75. They seem pretty reputable with all the options and Apple-specific stuff they offer, I just didn't want to make the same mistake again and would like other options if they are available.
    Thanks again!

  • Late 2008 Macbook Pro doesn't boot after installing Mavericks

    I have a late 2008 Macbook Pro, dual core 2.53 GHZ, 4 GB Ram (2x2).
    I've been tearing my hair out trying to get this computer to boot up.  Many things have been tried here.  So here's the history.
    Before starting this, I was running 10.6.8 on this computer.
    First time I tried to install Mavericks, the installation failed, and when the computer went to restart, it just went in a loop, never really booting up, just getting the to gray screen with the apple symbol, spinning the wheel, and then going black again, restarting, and repeat.  So, I took it into the Apple Genius Bar, and they diagnosed a bad battery.  I replaced the battery, and had them do a clean restore back to 10.6.8.
    I got it home, and tried to do an install again.  This time, I downloaded the installer, and put in on an external firewire drive, and attempted to do a clean install of Mavericks.  I ended up with the same boot failure problem.
    I went back to the apple genius bar, and even though the diagnotics said my harddrive was fine, they said in the troubleshooting list, that the harddrive with the first thing they suspected.  So, I replaced the harddrive.  I did the Mavericks install again from an external HD, and for a moment, everything was great.  It booted up into Mavericks.  But, after my first restart, the problem was boot failure was back.
    After reading a few articles, I tried booting in Safe mode.  That worked.  I also ran disk repair on the HD and it looked great.  Still, it won't boot up out of Safe mode.
    After being very frustrated, I tried just installing snow leopard from the dvd, but the install keeps failing. 
    Not sure what to do next. 

    Micajah10,
    rather than a hard drive problem, you might have a faulty internal SATA cable. Do you have an external disk enclosure, or a SATA-to-USB or SATA-to-FireWire adapter? If you can boot from your hard drive without problems when it’s external, but it remains problematic internally, then that could point to the internal SATA cable as the culprit.

  • I have a early 2008 Macbook pro and just bought a new battery, but it is not holding a charge

    I have a late 2008 Macbook pro and just bought a new battery, but it is not holding a charge.  I read it may be the charger,
    that sometimes is blank, but it does charge my computer.
    Anything I can try?
    I have updated to 10.9.2
    Message was edited by: wplewis

    Bring it back to the Apple store with your MBP and charger.  If the battery is found to be defective, they should provide you with a replacement (assuming you are in the warranty period).
    Ciao.

  • New macbook pro battery for late 2008 macbook pro dies fast.

    I have a late 2008 macbook pro 2.4 HGz Intet Core 2 Duo with 2 GB of ram. I've had it since 2009 and just got a new battery, as the old one finally gave up. That being said, the new battery dies quite fast and I'm not sure why. Any suggestions would be greatly appreciated! thank you

    Only problem is that maybe the battery you were sold was manufactured around the same time as the Mac. And LiPo batteries die because of old age as well as use. Take it out and carefully examine all markings, especially anything that can date when it was made, like copyrights or such.
    With that evidence you can go back and demand a refund.

  • How to connect a late 2008 macbook pro to hd tv

    I have a late 2008 Macbook Pro and want to connect it to my HD TV what cables do I need ?

    looks like if you'll use exactly this adapter you'll get audio over HDMI

  • HT201343 how to mirror late 2008 macbook pro to apple tv

    I have a late 2008 macbook pro. Can I mirror this to apple tv?

    Welcome to the Apple Support Communities
    See > http://support.apple.com/kb/HT5404
    AirPlay Mirroring is only compatible with Early 2011 and newer MacBooks Pro, so your MacBook isn't compatible. However, you can use a third-party application to mirror your computer onto your Apple TV, as AirParrot > http://www.airparrot.com

  • I have an early 2008 macbook pro that is running slow after upgrading to lion. Is there anything I can do? this is what I have,Processor  2.4 GHz Intel Core 2 Duo, Memory  2 GB 667 MHz DDR2 SDRAM.

    I have an early 2008 macbook pro that is running slow after upgrading to lion. Is there anything I can do? this is what I have,Processor  2.4 GHz Intel Core 2 Duo, Memory  2 GB 667 MHz DDR2 SDRAM.

    First, back up all data immediately, as your boot drive may be failing.
    Launch the usual set of applications you use when you notice the problem.
    Step 1
    Launch the Activity Monitor application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Activity Monitor in the page that opens.
    Select the CPU tab of the Activity Monitor window.
    Select All Processes from the menu in the toolbar, if not already selected.
    Click the heading of the % CPU column in the process table to sort the entries by CPU usage. You may have to click it twice to get the highest value at the top. What is it, and what is the process? Also post the values for % User, % System, and % Idle at the bottom of the window.
    Select the System Memory tab. What values are shown in the bottom part of the window for Page outs and Swap used?
    Next, select the Disk Activity tab. What approximate values are shown for Reads in/sec and Writes out/sec?
    Step 2
    You must be logged in as an administrator to carry out this step.
    Launch the Console application in the same way as above. Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left.
    Post the 50 or so most recent messages in the log — the text, please, not a screenshot.
    Important: Some personal information, such as your name, may appear in the log. Edit it out before posting.

  • Can i connect thunderbolt duo hard drive to the mini display port of a late 2008 macbook pro which do not have thunderbolt port, but have mini display port.

    hi, i have a late 2008 15 inch macbook pro, which have a mini display port.
    I noticed that thunderbolt and mini display port looks a like. So, my question is :
    can i connect thunderbolt duo hard drive to the mini display port of a late 2008 macbook pro which do not have thunderbolt port, but have mini display port.
    thank you

    ken94538,
    no, you’d need a Thunderbolt-to-FireWire adapter or Thunderbolt-to-USB adapter to be able to access your Thunderbolt hard drive from your 2008 MacBook Pro.

  • Are there genuine replacements available for battery in late 2008 macbook pro?

    are there genuine replacement batteries available for a late 2008 macbook pro?

    Probably your only hope, based on your description, is a SMC reset:
    http://support.apple.com/en-us/HT201295
    Note that you can contact Apple and ship your MBP to them for evaluation and possible repair.  That may be easier than a trip to the Apple store.
    Ciao.

  • Renewing a Late 2008 MacBook Pro: hard drive and battery substitution

    Hi all,
    I am an happy user of a late 2008 MacBook pro.
    However, with the passing of time, it became slow and the battery also deteriorate (it still quite OK, but it is not like at the beginning).
    But let's start from the beginning: the hard drive
    By googling for a while, I noticed that several people experienced very slow performance of their late 2008 MacBook Pro. That is also my case. Apparently, this is due to the hard disk which is dying, and then I considering to change it. However, I haven't found answers to these questions:
    - Is it possible to mirror all the containt of the current disk to the new one?
    - I only have the original installation disks of the first Leopard. I made all the updates through the network. Moreover, since it passed lot of time, I am afraid that some sector of the installation disks may be damaged. This means that I may fail in the installation of Mac Os X on the new hard drive. If I have to reinstall everything from scratch with the new hard drive and without installation disks, how should I do?
    - If I go a Mac Reseller shop, will do they perform this operation? And how much does it costs to make it? Or I may also go to some generic computer reparation guy?
    - Is it convenient to save all the data (movies, documents, pictures, emails, etc) somewhere (e.g. external HD) and then perform a completely new installation?
    Next, let's consider the battery.
    Here is a screenshot taken with iStat Pro:
    Do you think it is worth changing it? From System Profile I have those other info:
      Full charge capacity (mAh):          3386
           Current (mA):          846
           Voltage (mV):          12029
      Condition:          Replace soon
    What do you suggest to do then? How much does it cost a new battery? Actually, I think that also the processor performance deteriorate (it often becomes very hot, especially when watching Flash or Silverlight stuff), but, unfortunately I cannot change it.

    Hi!
    Thanks for all the answer. Please let me to resume this old and interesting discussion.
    After having evaluated several solutions (including NAS, different ways of backup, etc) I bought an external firewire HDD, since I believe it nicely fits my necessities. Next, after these holidays, I will finally replace my old HDD with a SSD one. I think 120 GB are ok. I just need the apps and small-sized documents (rather LaTeX, Matlab, word, pages or excel documents, etc. - no movies or mp3 (I have Spotify, for that) ). Large files (e.g. movies, pictures, etc) may end up in external firewire HDD.
    Now, let's consider the OS. I currently have 10.6.8 and I am very satisfied of that. I find it very stable, and all the apps I need are still well supported. On the other hand, given that there are like 5 years that I have the same installation, I may have a lot of obsolete files and setting that I can safely remove. This means that once I will have performed a backup of my documents, my email, my pictures etc. I can safely throw away all the rest. Hence, I may perform a brand-new installation of the OS. Although I am happy with 10.6.8, I was wondering if it is worth to upgrade it (I have a 2.53 Ghz Intel Core 2 Duo - 4 GB 1067 Mhz DDR3 RAM) to Lion, Mountain Lion or Mavricks. In that case, which would be the real benefits? And what about the cons?
    Finally consider that I only have the Leopard installation disks from 2008 (not even Snow Leopard) and I will bring my laptop to a techician to change the HDD (I know, it is simple but I don't have all the screws etc. and I will not buy them only for this purpose). Once he will have replaced the HDD, will he re-install the OS also? Or I have to reinstall the OS through my original DVD (5 years old, I don't even know if they still work) and upgrade to Snow Leopard again by myself? I would exclude the carbon copy solution since I may want to throw away a lot of garbage and perform a brand new instalation of the OS. How to proceed? Thanks again!

  • How to update graphics card drivers for late 2008 macbook pro with Nvidia 9600m GT?

    Can anybody help me update the drivers for my 9600m GT graphics card for my Late 2008 Macbook pro? I am running OS X Lion 10.7.5 with a Windows 7 partition. I have tried finding support on Nvidia's website, but at least for the 9600m GT, it isn't supported for my operating system. Would I have to update it from my Windows side? And if so, would the update apply to my OS X side as well? I have a little computer knowledge, but nothing indepth.

    Welcome to Apple Support Communities
    In OS X, Apple provides the GPU drivers and you cannot update them from NVIDIA. They are updated with each OS X update, so you are running the most recent drivers for your OS X version. OS X Mountain Lion and Mavericks have got more recent GPU drivers, but it's not worth upgrading unless you need newer drivers for an app (I highly doubt this).
    However, you can update the GPU drivers in Windows, and you should do it to get the best performance. You can download them from the NVIDIA site > http://www.nvidia.com/Download/index.aspx?lang=en-us Note that drivers are only applied in the operating system you are installing them, so they will not be installed in OS X

Maybe you are looking for