I have a late 2013 MacBook Pro without retina, should i upgrade to Mavericks? Or will it run slower?

Hi, I bought a late 2013 MacBook Pro without retina display and I want to know if I should upgrade to mavericks since I don't want to make it slower, is it worth it?

angie.ob,
if your MacBook Pro is non-Retina, then the newest model that it could be is a Mid 2012.
The worth of upgrading to Mavericks depends entirely upon your priorities. What is it about having Mavericks on your MacBook Pro that appeals to you? If Mavericks in its current incarnation makes your MacBook Pro run more slowly, do you have a plan by which you can easily go back to Mountain Lion?

Similar Messages

Is there a way to digitize audio using the headphone input on the 15-inch (late 2013) Macbook Pro with Retina display?

I'd like to digitize audio from a minidisc player into my 15-inch (late 2013) Macbook Pro with retina display, but can't see a way to change the internal mic input. I understand that previous MacBooks allowed the headphone jack to double as a mic input, but mine doesn't seem capable of switching. I've tried using a mini to mini cable, with no luck, and also tried using a headset splitter adapter (3.5 mm 4-pin to 2x3-pin 3.5 mm headset splitter adapter from Amazon) because I read that that would allow me to plug in headphones and input audio. But in both cases, the only "input" available in my sound preferences is the built-in internal microphone. Am I missing something? Is there a way to digitize audio through the headphone jack?

Not likely. headphone jacks are usually output only devices unless specifically stated to support input, and even then, it may not be audio input that they support, but merely control input for volume and such.
You can get a USB audio input instead. i.e:
http://www.amazon.com/Griffin-Technology-iMic-Audio-Device/dp/B000BVV2IC

I have the late 2013 Macbook Pro 15 inch with apple care, and the display flickers in a certain spot at a certain brightness. Has anyone ever had this issue, and what did you do about it?

I doubt this is a GPU issue i've restarted my Mac, but the shape of the flickering area is in a cone shape comming from the bottom edge from the right side in about 2 inches. I'm thinking this is a failing display?

Apple will cover it if it was an accident or defect. Take it to a nearby Genius bar. I'm guessing its a graphics card or display issue. But the symptoms of a damaged GPU for me were different. I had issues with my last 13" MacBook Pro non-retina mid 2012. If I set it down or moved my machine, my screen would flicker and the pixels would be completely off and the whole system would freeze, even if I wasn't using it. If it fronze when I didn't use it, it would get REALLY hot. Like I said, if it's an accident and less than a year old, Apple will cover repairs. If it's older than a year and it was accidental, AppleCare won't cover it. If it was a defect, it will be covered as long as the AppleCare hasn't expired. If you buy a MacBook through BestBuy, you could buy BestBuy Care which covers accidental and defects. My friend fried his last machine with water and apple was going to charge him the price of a new machine and BestBuy charged about $900 and then he paid extra to upgrade to a new retina display.

Feedback: Late 2013 Macbook Pro with Retina (Wireless)

Hi,
I'm not looking for speciic problem resolution in this thread (though, if I get it that would be fine) -- I'm starting the thread to gain feedback for the MBP in the subject line. Looking for feedback on whether or not the MBP meets your expectations from a Wireless performance standpoint, notably about time to find and connect to an access point. I'm finding that mine takes an unacceptable amount of time to find/connect to an AP and often requires that I turn wireless of and back on to actually connect.
What's your experience? I'm interested in everything from "works perfectly and meets my needs" to "complete piece of junk that I want to return to the nearest apple store" and everything in between. I'm not trying to start a mutiny here just legitatemly trying to get feedback on how widespread of an issue this is.
Thanks,
Dave

Absolutely Perfect for me. No problems at all and instant connect. Is your wifi signal strength from the access point really low. This may be the problem. You should put it directly next to it and see how that works out.
I have a wifi with several Airport Express at home which all create one large network together (using two of them as extenders). As soon as I walk into our apartment, I can see our NAS wake from sleep as my rMBP has already connected to the wifi in PowerNap mode and polling the NAS.
EDIT: This is me carrying my MBP in my backpack in case that wasn't really clear LOL.

Late 2013 MacBook Pro Casing Replacement

I've a late 2013 MacBook Pro with Retina. I damaged the top casing and the display housing (chips). Where can I get them replaced?

Sorry to hear that. Apple can do it but it is going to be expensive (estimated to be around $300-$400). Another way, though not recommended, is to buy the part off eBay and have someone install it. The latter option is risky so I wouldn't do it but it is an option.
FYI, I really like their cases. Think about getting one of these once you replace the part.

I have a late 2008 Macbook Pro, I am trying to run MW3 but it will not work without crashing a few minuets into the game. The general specs on my computer are a dual processor 2.53 ghz. 4 gb ram and a NVIDIA geforce 9400 (9600 is the alternate card)

I have a late 2008 Macbook Pro, I am trying to run MW3 but it will not work without crashing a few minuets into the game. The general specs on my computer are a dual processor 2.53 ghz. 4 gb ram and a NVIDIA geforce 9400 (9600 is the alternate card).
Things to note:
I have been unable to update firmware on this computer for about a year now. Im not sure why.
I am running a bootleg copy of Windows XP on this computer, I would not like to spend $149 to get Windows 7 if possible.
any thoughts on the matter would be greatly appreciated, thank you.

Why don't you take your 'old' MBP into your local Apple Store and have them check out everything that's wrong with it - and I mean everything? Then, when you get an estimate about how much it would cost to get the machine completely repaired, ask about the Apple flat-rate repair pricing?
It's worth a shot - and with what you may save, you can put in the bank for a new MBP.
Clinton

I just brought Macbook pro(without retina display) on 15 june 2013 and since then put it on 6-7 hours of charging but still my macbook pro is not 100% charged. but why? (green light is displayed on the adapter pin)

i just brought Macbook pro(without retina display) on 15 june 2013 and when i switched it on the battery was 72 % charged and now the battery is charged to 62%, i used the charger that came with it and kept it for 6-7 hours on charging but it is not charged to 100% but why? also the green light is always on when i plug the charger with my mac book pro.Please tell me the meaning of Green light on power cord lid (mac book pro not charging or charging?) and also the other light if there like amber or any other colour.

Hello Shailendras33,
Congratulations on your new MacBook Pro! Thank you for providing all the information about what is going on with the charging issue.
Firstly, I found some information on page 11 of the MacBook Pro User Guide about what each color of the LED means on the Power Adapter:
When you first connect your power adapter to your MacBook Pro, an indicator light on the
MagSafe connector starts to glow. An amber light indicates the battery is charging. A green light indicates that the battery is fully charged.
You can find the MacBook Pro User Guide here (this is not for the latest MacBook Pro, but the information about the MagSafe adapter is true for the newest model):
MacBook Pro User Guide
http://manuals.info.apple.com/en_US/macbook_pro_15inch_late_2011.pdf
It sounds like you are not getting the amber light indicating your computer is charging, and you are noticing that the battery level is depleting. I recommend resetting your System Management Controller when something like this is occurring:
Resetting the SMC on portables with a battery you should not remove on your own
Note: Portable computers that have a battery you should not remove on your own include MacBook Pro (Early 2009) and later, all models of MacBook Air, and MacBook (Late 2009).
Shut down the computer.
Plug in the MagSafe power adapter to a power source, connecting it to the Mac if its not already connected.
On the built-in keyboard, press the (left side) Shift-Control-Option keys and the power button at the same time.
Release all the keys and the power button at the same time.
Press the power button to turn on the computer.
Note: The LED on the MagSafe power adapter may change states or temporarily turn off when you reset the SMC.
You can find the full article here:
Intel-based Macs: Resetting the System Management Controller (SMC)
http://support.apple.com/kb/ht3964
Thank you for posting in the Apple Support Communities.
Best,
Sheila M.

I have a late 2008 Macbook Pro last updated to Mavericks OS. The screen died and it's not worth replacing. How do I remove the hard drive and use a drive sled to access info I need?

I have a late 2008 Macbook Pro last updated to the Mavericks OS. The screen died and I took it into an Apple store and was told replacing the screen and the hardware to repair everything would cost almost as much as buying a new laptop or a cheaper model. I was told that I can use a drive sled to access data I need on my hard drive. How do I remove my hard drive and use a drive sled to get to the information I need? What makes matters more complicated is I need to update my iPhone and my iTunes/App store purchases. How can I accomplish this?
My wife has a late 2008 Macbook Pro as well, which I am assuming I need to run my hard drive. Is there a way to just access just my hard drive without interfering with hers?
I know this is lengthy. Thanks to whoever looks at this and offers advice/instruction.

the device you need is an External enclosure for a 2.5" (laptop form factor) SATA drive.
A USB-interface enclosure will be slow, but is adequate for this task and for re-purposing as a backup drive later. A firewire-interface drive would be faster, but is harder to find, more expensive, and faster than needed for this purpose.
The drive will mount as an "extra" drive on your wife's Macbook, and you can drag and drop whatever you wish. You could create a separate Account for yourself on her computer, and use Migration Assistant or just copy your stuff over to the new account. Then it would not interfere with her files.

How to install system on late 2013 macbook pro retina ?

Hmmm .... I need help.
I deployed a 10.9.1 from a new MBA image to the new 15" MBPr .... not a good idea. It won't boot because of the special build that the late 2013 requires.
So the original recovery HD is gone, so can't go that route. Now I need help badly. How to get the darn thing to bootup .... or how to start over ?
BR Martin

Welcome to Apple Support Communities
Your Late 2013 MacBook Pro comes with Internet Recovery, which can be used without needing a Recovery partition. To start up in Internet Recovery, hold Command, Option (Alt) and R keys while your Mac is starting, and reinstall OS X. You will get OS X 10.9.1, and the Mavericks installer will create the OS X Recovery partition.
Your MacBook Pro requires a special OS X 10.9.1 build that is not available for any other Mac, and you cannot install the "normal" OS X 10.9.1 version on your MacBook Pro. Apple will fix this in a future update, when your MacBook Pro and all other Macs use the same OS X build.

Late 2013 Macbook Pro Retina 15' will not boot an external disk from a Mid-2012 MAcbook Pro. What should I do?

In order to simplify moving all my files from the previous mid-2012 macbook pro 15' when moving to my new late-2013 macbook pro, i superdup-ed the full hard-disk to an external ssd. Unfortunatelly the new mac resuses to boot from this external disk (i get the grey disk with a line over it). The external disk works just fine so if I boot the new mac from its internal SSD I can read/write the external disk without problems.
Old OS X is 10.9 as is the OS on the new mac.
What I need to do is to boot the new mac from the external ssd, use the same superduper to copy the external content onto the internal ssd.
How can I solve this issue?

Welcome to Apple Support Communities
If you made a backup of your files with SuperDuper, use Migration Assistant (in /Applications/Utilities) to transfer your files from the external drive > http://pondini.org/OSX/MigrateLion.html It will create a new user account with the transferred files, so you may want to merge both user accounts > https://discussions.apple.com/docs/DOC-5472
The Late 2013 MacBook Pro uses a special OS X Mavericks version which makes OS X compatible with it, and older OS X versions do not work with it. That's the reason why you cannot start up from the external drive created from the Mid 2012 MacBook Pro

Help! My Canon MG5520 printer is apparently not connected to my late 2013 MacBook Pro!

Help! My Canon MG5520 printer is apparently not connected to my late 2013 MacBook Pro! I have had this printer a few months and everything has been working fine until today. I did I have to turn my wifi router on and off this morning, so I think that might be it. I'm not extremely tech savy, so if anyone could lend a hand, I would appreciate it!! I've tried unplugging it, turning it on and off again, quitting it my from laptop, nothing works. Do I need to reconnect it to the wifi? How do I do this? I turns on fine and doesn't give my any error messages, it'st just my laptop that says it isn't connected. Sorry if this is a stupid question.

Thanks for providing complete information. It seems like you've ruled out faulty docking cable, bad USB port, and software issue on the new Mac. And since the shuffle still works fine on the older Mac, it's not a problem on the shuffle.
Some things to try...
Connect the MacBook to its power adapter, so that it's not running the battery power. If any other USB devices are connected, try connecting the shuffle as the only device, to a direct USB port on the MacBook.
If you can keep it connected for long enough, go to the shuffle's Settings screen in iTunes and set it to Enable disk use (and Apply). This will keep the shuffle's disk mounted continuously, instead of iTunes unmounting the shuffle's disk when not syncing.
If you happen to have an old USB 2.0 hub that has its own power supply, connect the shuffle through the hub to see if that make any difference. The new Macs have USB 3.0, so if that's the cause, maybe a USB 2.0 hub in between can act as a "buffer" and make it work.

I need a recommendation for a 24" monitor for my late 2013 MacBook Pro

I need a recommendation for a 24" professional photography monitor for my late 2013 MacBook Pro. I am looking for a monitor that plays well with my 13" late 2013 Macbook pro. I tryed the Dell U2413 and found after the fact that it did not work well with my Macbook pro. Read up on the Asus PA 249Q, It also seems to have problems with my Macbook Pro. Apple display is larger than i want. Looking for recommendations for compatable IPS monitor for use with Aperture. buget is $300 to $800.
Anybody happy with thiers?
MacBook Pro with Retina display, OS X Mavericks (10.9), Aperture 3.5.1

Any monitor will work. Decide what specs work best for your needs and get that monitor.

Late 2013 Macbook Pro Retina 13" Thunderbolt to DVI Connection to Samsung 24" - Static screen upon wakeup

Hi,
My Late 2013 Macbook Pro Retain 13" is connected to the Samsung 24" Samsung via Thunderbolt/DVI connector.
Upon wake up from sleep mode, the Samsung monitor displays a static screen.
Any idea what the cause maybe and how to fix it? - Right now I have to unplug and plug back the thunderbolt to fix the issue which I find annoying to do. Any better solution out there?
Thanks alot!
Mznrc

In a word, yes.
The video out capabilities for the 13" and 15" retina MBPs are the same.
Tech specs

Anyone else having extra long delivery time for the late 2013 macbook pro 15" 2.6ghz 1tb model?

Anyone else having extra long delivery time for the late 2013 macbook pro 15" 2.6ghz 1tb model?
As of today feb 15 i have been waiting for 78 days. Finland doesn't have an official apple store (only authorized resellers) It was my mistake because i should have bought from apple.com. But i think 2.5 months is too long and i have no information about when i can get it..

The low-end 15” rMBP with a 8 GB or RAM and a 256 GB SSD costs $2,000.
The low-end 15” rMBP with a 8 GB or RAM and a 512 GB SSD costs $2,300.
With 16 GB of RAM and a 512 GB SSD it costs $2,500.
The high-end 15” rMBP with a 16 GB of RAM and a 512 GB SSD costs $2,600.
All cost $500 dollars more with a 1 TB SSD.
So the SSD size is not a differentiating factor unless you prefer 256 GB.
If you think you need 16 GB of RAM and a 512 GB SSD then you might as well spend the extra $100 for the high-end model.
The high-end model will make a difference on gaming and graphics-oriented applications.
They tend to run other applications at about the same speed.
Both models are rated with 8 hours of battery life.
Benchmarks on PhotoShop comparing memory sizes: https://discussions.apple.com/thread/5659174?tstart=30
The speed was about 10% different between 8 GB and 16 GB models.
On other applications your mileage may vary.
Application benchmarks:
http://www.macworld.com/article/2059215/15-inch-retina-macbook-pro-review-a-tale -of-two-laptops.html
The low-end and high-end performed the about the same on non-graphics oriented applications.
Graphics oriented benchmarks:
On the Cinebench OpenGL benchmark the high-end was about twice as fast.
On the Unigine Heaven Benchmark benchmark they ran at about the same speed.
On the Unigine Valley Benchmark benchmark the high-end was about 1.5x as fast.
Message was edited by: hands4

Duel microphone holes on the late 2013 MacBook Pro 15"

Are you meant to be able to see the duel microphone holes on the late 2013 MacBook Pro 15"
It shows them on the tech specs on the apple site and most other places I've seen, but mine doesn't have the holes.
Is it also common that pages, numbers and keynote were not automatically installed when I bought it new?
When setting up the new macbook I got an email saying;
Your Apple ID was used to sign in to iCloud on a MacBook Pro 13"
However it is a 15"... Should I be worried? I bought this off the online store.

If you do what I said - "Go to the bottom of the page and click on the Mics button." you will see the description - "under the speaker grille"

I have a late 2013 MacBook Pro without retina, should i upgrade to Mavericks? Or will it run slower?

Similar Messages

Maybe you are looking for