I have a logo from another source and need to change the colors of it, HOW?

I had an outside source build me a logo which I want to use for my product labels etc. but I'm having trouble figuring out how to format a template for the correct size to transfer to the labels and I cant figure out how to change the color/colors of the logo that I was given?

Andy,
The trial works just as the paid one, same version, only time limited.
If you open the AI version, what happens when you Alt/OptionClick (hold Alt if on Windows, Option if on Mac when clcking) one of the areas you wish to colour change?
If we are lucky, that will select the area, and you may change the colour (if you have selected the Fill box rather than the Stroke box at the bottom of the Toolbox); you may set the CMYK or RGB values in Window>Color (choose the relevant one from the flyout), or from the Window>Swatches, or in a few other ways.

Similar Messages

  • I have three different e-mail addresses, and need to receive the incoming e-mails from the three sources.  How do I enable my iPhone to do it? Tks in advance.

    I have three different e-mail addresses, and need to receive the incoming e-mails from the three sources into my iPhone (it's presently receiving msgs from only one of them).  How do I enable my iPhone to do it? Tks in advance.

    Many thanks for your help!

  • HT4009 I'm trying to make and in-app purchase on my ipad  on which there is £14 credit (gift crd redeemed) however it's asking that because I have signed in from another device I need to verify my payment info, which I do but it declines? And I have funds

    I'm trying to make and in-app purchase on my ipad  on which there is £14 credit (gift crd redeemed) however it's asking that because I have signed in from another device I need to verify my payment info, which I do but it declines? And I have funds?
    I've even tried another card and get the same. Confused. Any advice?

    You have a Puerto Rico address on your account ? From a quick search I've found one site from somebody in Puerto Rico that includes a screenshot for an app receipt showing tax of 7 cents added to a 99 cent purchase. Are you able to view the purchase history on the account that you've been using, and see what prices show on them (e.g. if the store's listed price or price plus tax) : Store > View Account menu option on a computer's iTunes, then 'see all' link next to the Purchase History section.

  • I have finalized my iMovie photo slideshow and wanted to burn the imovie onto dvd. how can i do this so i can watch it on my television?

    i have finalized my iMovie photo slideshow and wanted to burn the imovie onto dvd. how can i do this so i can watch it on my television?

    Hi
    If there is no iDVD on Your Mac (and it's not on newer Macs as Apple discarded it) then You need a program that can do this.
    Your Mac can burn CDs and DVDs - BUT DVD as Data-DVDs not as Video-DVDs - they need a program to be encoded and STRUCTURED as such.
    • iDVD is part of the boxed version of iLife'11 and can only be bought outside Apple as on Amazon and e-bay
    • DVD Studio pro - Part of FinalCut Studio Pro bundle - this to has expired and can only be bought second handed. (High price and tough learning Curve - but best ever done.)
    • Roxio Toast™ - Not as elegant as iDVD - but has many other positive additions (I like it as 10-Pro incl BD-component) (now version 11)
    • Burn - only free alternative I know of on internet. Very simple - Just for doing a plain Video-DVD
    Burn http://www.digital-digest.com/software/Burn.html
    only You can buy from Apple is
    • FinalCut Pro-X which also can burn to DVD but without any nice themes.
    AppleMan1958
    You can also buy Compressor from Apple for $50 US. It will also create DVD and BluRay but without the nice themes.
    Yours Bengt W

  • Apple TV only showing trying to change date and time. I have recently changed to a new wifi provider and need to change the settings in tha ATV box.

    Apple TV only showing trying to change date and time. I have recently changed to a new wifi provider and need to change the settings in tha ATV box.

    Welcome to the Apple Community.
    Assuming this is not the first time you have used your Apple TV
    You might try restarting the Apple TV by removing ALL the cables for 30 seconds.
    Also try restarting the router. (Also try removing it’s power cord for at least 30 seconds)
    If the problem persists, try a restore, you may want to try the previous procedures several times before doing this.
    If restoring from the Apple TV doesn't help, try restoring from iTunes using a USB cable.
    If this is a new Apple TV, in addition to trying the above, it may also be that your network router is not allowing access to the timeserver, check that your router allows access over port 123.

  • Hello. So I have used my iPod touch 4g for 2 years now and need to change the battery. My question is: will I lose everything I have on my iPod like my music,pictures and apps if I change the battery on my iPod touch 4g?

    hello. So I have used my iPod touch 4g for 2 years now and need to change the battery. My question is: will I lose everything I have on my iPod like my music,pictures and apps if I change the battery on my iPod touch 4g?
    Thanks for answer

    If you go to Apple, they will not replace your battery, but exchange your iPod for a refurbished iPod of the same model with a new battery.  Therefore you will lose everything that is not backed up.  If you change it yourself or have a third party change it, you will most likely not lose anything (but still best to make a backup as lllaass suggested).

  • Wpf Text Box , Is set to mandatory and need to change border color .

    Hi,
    In wpf application . We a text box as mandatory and set the border color as red . We need to change the color to black when user enter values .
    How to do that in xaml page .
    Thank YOu

    Hi Jeevan,
    you could use a Style with a trigger for that.
    <Window x:Class="WpfApplication1.MainWindow"
    xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
    xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
    Title="MainWindow" Height="350" Width="525">
    <Window.Resources>
    <Style TargetType="TextBox" x:Key="TextBoxMandatoryStyle">
    <Style.Triggers>
    <Trigger Property="Text" Value="">
    <Setter Property="BorderBrush" Value="Red"/>
    </Trigger>
    </Style.Triggers>
    </Style>
    </Window.Resources>
    <Grid>
    <Grid.RowDefinitions>
    <RowDefinition Height="Auto"/>
    <RowDefinition Height="Auto"/>
    <RowDefinition Height="Auto"/>
    </Grid.RowDefinitions>
    <TextBox Grid.Row="0" Style="{StaticResource TextBoxMandatoryStyle}"/>
    <TextBox Grid.Row="1" Style="{StaticResource TextBoxMandatoryStyle}"/>
    <TextBox Grid.Row="2" />
    </Grid>
    </Window>
    Thomas Claudius Huber
    "If you can't make your app run faster, make it at least look & feel extremly fast"
    My latest Pluralsight-courses:
    XAML Layout in Depth
    Windows Store Apps - Data Binding in Depth
    twitter: @thomasclaudiush
    homepage: www.thomasclaudiushuber.com

  • Babylon search engin keeps taking over my home page.I have deleted it from my computer and it just took over Google again. How can I get rid of it?

    Since I downloaded Mozilla Firefox on my new computer, Babylon search engine keeps taking over my home page. I have deleted it from my computer and have installed Google as my home page - It has just done ANOTHER hostile takeover and completely kicked Google off. Babylon doesn't even find the right things I search for. It is horrible - is it a virus and how do I get rid of it?

    The Reset Firefox feature can fix many issues by restoring Firefox to its factory default state while saving your essential information.
    Note: ''This will cause you to lose any Extensions, Open websites, and some Preferences.''
    To Reset Firefox do the following:
    #Go to Firefox > Help > Troubleshooting Information.
    #Click the "Reset Firefox" button.
    #Firefox will close and reset. After Firefox is done, it will show a window with the information that is imported. Click Finish.
    #Firefox will open with all factory defaults applied.
    Further information can be found in the [[Reset Firefox – easily fix most problems]] article.
    Did this fix your problems? Please report back to us!

  • I have a 4s updated to iOS6 and I cannot change the mail tone. It is stuck.

    No matter how much I try, I cannot change the mail tone and it is really frustrating me. I have restarted the phone, reset the phone, restored the phone. Still no luck. Can anyone help?

    I really appreciate your help! Thank you so much. I can't change any sounds for mail. I have two accounts on my phone, and when I change them both, either through the notification centre, or the sound section they play the sound you click, but then when you actually get an email they revert back to one a quack the other a sci-fi noise

  • I am trying to install FF on a thin client, and need to change the location the installler extracts the temp files to as the disk is not big enough.

    Is there a pre extracted version of the installer or a way of specifiying where the installer extracts itself to?

    If Firefox on Windows is using the current temp folder then you need to change the location of the temp folder via the %TMP% and %TEMP% environment variables.
    *Control Panel > System > Advanced > Environment variables
    *Right-click My Computer > Properties > Advanced > Environment variables

  • TS2755 I living in Israel using Hot Mobile an 3.9G network, transferred my old number from another carrier and for some reason the imessage / face-time not working anymore even restore not helped, it stuck on "waiting for activation" please help

    when i try to active the imessage or facetime it typing "Waiting for activation" and stuck like this.
    when i go to setting > phone > i see the correct number.
    i think i read the whole google already trying resolving this issue tried everything, even restored my phone and actived the new sim using itunes.
    but still not working same error.
    the NEW sim of HOT MOBILE gave me a temporary number which worked fine its was 053-xxxxxx
    after somthing the transfer like 24 later hours they transfered my old number from another carrier witch is 054-xxxxxx
    and now not working.
    called my carrier and they has no idea how to fix that.
    they told me contact apple.
    P L E A S E    H E L P. . .

    Hi guys,
    I keep getting "waiting for activation" on my iMessage. I can only send/receive iMessage from my email address, NOT my phone number.
    I have done all kind of fixing suggestions that I can find online, but nothing works so far.
    - Date & time set as automatic (I don't know why this matter, but mine was already set as automatic from the begining)
    - Reset network setting
    - Changing the DNS to 8.8.8.8.
    - Restore to factory setting (from back up & as new iPhone)
    - Turning on/off iMessage & facetime
    - Sign out/in of apple ID
    - Change location from apple ID
    - Hard reset/reboot
    And many others.
    ...me too. I'm in Portugal having the same issue!! Hopefuly Apple will give us a solution, shortly...

  • Went in to update schedule on a page in my site. Looks fine on my end in editing. Go to move to server, once posted from the browser side there is now a Gray box going across the page. Tried a test page from another page and made a change and posted and s

    Here is link to what the page looks like after being uploaded to server. Gray box appears, and its not in code. Even when I create a new page, this Gray box appears. Where is this coming from? How do I get rid of this from this page and any new pages I create, why is it doing this? Schedule

    Morning Ken...
    I went home and replaced the Music page image with the one you said worked (previous background image), but I am still getting the same issue, now this file is showing up as having errors? [If I use your previous background image
    http://lynnsorensen.com/images/Music_bckgrnd.jpg]
    Could it be Dreamweaver itself? I noticed there has been an update lately with Dreamweaver to my computer...some new Live option has been added. I use the online subscription to Dreamweaver. This is happening on all my pages with the images on all my sites, only shows up with the gray box if I make a change to a page. If I don't make a change to a page the page appear fine and in working order. I'm confused and frustrated. Any other options you may know of or suggest? Thank you so much for your time. I've provided screen shots from Goggle and Firefox below.
    Here is screen shot in Google:
    Here is screen shot in Firefox:

  • I have a sony HDR-SR5 camcorder and need to empty the iternal hard-drive. I have downloaded onto Picture Motion Browser and woud like to know if this will have stored all of the data on the hard-drive so can go back and edit later.

    I have a Sony HDR-SR5 camcorder with a 40GB internal hard-drive. I need to clear the hard-drive as it's almost full. I have managed to download the footage onto Picture Motion Browser, but am wondering whether PMB will have stored all the info from the camcorder hard-drive so that I can edit later.
    Also, I would like to back-up on another hard-drive, but when I have tried this I can't view the footage stored on the hard-drive so am not sure whether I have backed up sufficiently and in what format? If anyone can point me in the right direction, I'd be very grateful...

    >I have managed to download the footage onto Picture Motion Browser
    Isn't Picture Motion Browser available for Windows only?  If so, why are you posting in an Final Cut Express forum?  My apologies if I'm incorrect.
    -DH

  • I have $0.23 in my account and need to change country, but I cannot spend such a small amount, which I am required to do before changing the settings. How do I get rid of the money?

    I have $0.23 left in my itunes account and have moved to another country but I am told I cannot change the country setting before the money is spent. How do I get rid of the $0.23?

    Click here and request assistance.
    (78139)

  • Calling the DTExec from Perl Script and need to get the Return Value (Sucess or Failure)

    I am able to execute the SSIS Package from Perl Script using DTExec. But i need to get the return code of the SSIS Execution. Is their any option available to get the Success or Failure information from Perl ?

    Exit codes returned from dtexec utility             
    When a package runs, dtexec can return an exit code. The exit code is used to populate the ERRORLEVEL variable, the value of which can then be tested in conditional statements or branching logic within a batch file. The following table lists
    the values that the dtexec utility can set when exiting.
    http://technet.microsoft.com/en-us/library/hh231187.aspx
    There's a wrinkle if the package is running in the SSIS Catalog:
    http://www.mattmasson.com/2012/02/exit-codes-dtexec-and-ssis-catalog/
    David
    David http://blogs.msdn.com/b/dbrowne/

Maybe you are looking for