I have a Mac 10.2.8 and Firefox 2.0.0.20. What is the highest upgrade I can get for this Mac because I don't want to have to upgrade my Mac or buy a new one?
I can't access certain links from sites, especially with a lot of graphics. I get messages to the effect that I need to upgrade my browser. But then the update says I need a 10.3 Mac or higher. Also any site with a lot of graphics takes forever to download. Is there an intermediate update that I could use instead for my Mac?
For Mac 10.2.8 you need Firefox 2.0.0.20 as Firefox 3 will NOT RUN on your Operating System.
Download Firefox 2.0.0.20 from HERE.... http://www.mozilla.com/en-US/firefox/all-older.html
Follow THESE Instructions to Install... http://kb.mozillazine.org/Installing_Firefox#Mac_OS_X
BUT This is scheduled to be the LAST release of Firefox 2, so you will need to upgrade youur computer to receive further updates.
Similar Messages
-
for you see, i need to replace it. i hope to buy the battery off the internet (ex. ebay, amazon) and i dont want to get the wrong one.
http://www.amazon.com/Apple-Original-A1322-020-6547-A-661-5585/dp/B008N2UI6I
-
I have a 2007 (Imac7,1) running Snow Leopard (10.6.8). What is the latest OX I can upgrade to? I want to get t the Cloud and I can't
Minimum requirements for iCloud is v10.7.5 Lion.
See if your Mac can run Lion > OS X Lion - Technical Specifications
You can purchase Lion here > OS X Lion (10.7) - Apple Store (U.S.)
After the purchase Apple will send you an email notification with a redemption code you can use at the App Store to downlaod Lion.
BEFORE you do that, see if your Mac can Mavericks > OS X Mavericks: System Requirements
If so, you don't need to purchase Lion.
You can download Mavericks from the App Store for free.
Read prior to upgrading from v10.6 >
Upgrading to 10.7 and above, don't forget Rosetta! | Apple Support Communities -
I want to upgrade from CS3. What is the highest contribute I can upgrade to. Also, I want to inst
I want to upgrade from Contribute CS3. What is the highest system I can upgrade to? I need to install on 2 computers; one is Windows and the other is MAC. Can I do this?
Thanks
DannyContribute 6.5 is the current version and Adobe only sells current versions.
Unfortunately Contribute CS3 is too old to qualify for an upgrade. Only CS4 and newer qualify.
http://www.adobe.com/products/contribute/buying-guide.html
You'll either have to pay full price for CS6.5 or find another software solution. -
I have an older iMac G5 OSX 10.4.11 What is the latest version of Safari available for this machine?
I have an older iMac G5 OSX 10.4.11. I currently have Safari 4.1.3 and I am being told by some of the web sites I use that they no longer support that version of Safari. What is the latest update I can get and how?
TenFourFox -- It's a port of the latest FireFox to run on older hardware and software.
"World's most advanced web browser. Finely tuned for the Power PC."
-- works for me on 10.4. Supports 10.5
http://www.floodgap.com/software/tenfourfox/
alternative download site:
http://www.macupdate.com/app/mac/37761/tenfourfox
Turn on pipelining. This will allow Firefox to make simaltaneous requests to the server. Chrome has pipeling turned on. Some sites could fail to load with pipeling set on. The site will be old. See "Increase pipelining" in:
http://www.hongkiat.com/blog/firefox-optimization-tips/
OmniWeb uses the lastest Safari framework. The open source WebKit. Other browsers like Safari and iCab use the OS version of WebKit. The OmniWeb downloaded dmg includes it's own copy of the latest WebKit.
http://www.omnigroup.com/products/omniweb/ -
HT1338 i have a ibook 1.3g. What is the highest OS I can install
i have a ibook 1.3g. What is the highest OS I can install
The iBooks use a PowerPC 7447A (G4), so Mac OS X 10.5.8 is the latest version you can run.
-
When I tried to convert a file from PDF to WORD.DOC it opened as Read Only and I'm unable to alter any of the text. How do I solve this problem? I don't know how to change it from Read Only.
Dear Sara
Thank you very much for sending the converted file. Yes, I am able to edit it - that will be very useful to me and I appreciate your help.
Referring to your previous message when you said you'd converted via Acrobat and not Acrobat.com, I'm converting via Acrobat.com because that's the only option that is shown (how do I convert via Acrobat? - perhaps that would be more successful). I'm using the Export PDF website, and the OCR is enabled to "Recognize text in English UK". However, I've just tried converting a different LPA pdf form, this time for Health & Welfare https://www.gov.uk/government/uploads/system/uploads/attachment_data/file/245571/LPA114_He alth_welfare_LPA.pdf and again I have the same problem as before. I've altered it from "Read only" and thought I'd then be able to enter text, but "Drawing Tools" is shown in the pane and I'm unable to enter anything onto the form - everything appears to be in images. Also, the lettering on the heading of' page 1 has become jumbled, with the word "Public" overlaying the word "Guardian." Any suggestions as to what it is I'm doing wrong would be welcome - I don't like to be beaten!
Regards,
Judith. -
when i m in a call i touch the screen with my cheek and i keep on putting calls on hols or speaker..how do i solve this?if i don t want a headset?
SORRY, the picture is just to illustrate and to better show the area where the time display is located, same place in the iPhone 3gs, to my knowledge, the location is the same, due to the OS on both phones.
Second, run the test to see if it works:
1st test: go to phone mode, select dial key pad, put the tip of your thumb in top of the time display ( the screen will not go black), try to dial.
2nd test: place a call, after starts ringing switch the display to dial pad, put the tip of your thumb on top of the time display, the screen will not go black, try to dial.
THE SCREEN WILL ONLY GO BLACK ( INACTIVE) IF YOU TOUCH A LARGER AREA TO THE TOP OF THE DISPLAY, IF THE THUMB ONLY TOUCHES THE TIME DISPLAY AND A LITTLE PART OF THE AREA WHERE THE NUMBERS APPEAR THE DIAL PAD DID NOT WORK EVEN WITH THE DISPLAY NOT GOING BLACK (INACTIVE).
I am also trying in my wife's iPhone 4 as I right this post and both phones behave the same way.
I found out what I stated above after running tests to see if the case was affecting the phones performance.
Due to the thickness of the case on the sensor area, it really did affect the way the sensor was supposed to work, after I cut that part on the case, the sensor started to work perfectly and the screen turns off during a call like it is supposed to do.
So before someone go nuts thinking that the phone is not working and that they have to take it to repair, try seeing if the case is not interfering with the phones performance. -
When I try to play Netflix on y new Mac Mini and old monitor, I get a message asking me to make sure my monitor is HDCP compliant. Is this because I am using an old monitor? Do I need a new one?
All kinds of bugs are being reported with Safari, from sluggish performance to it refusing to load up at all. Some users are seeing an HDCP compliant error message appear when watching Netflix, and possible solutions include switching to Silverlight rather than HTML5 or unplugging display peripherals. Alternatively, you could switch to another browser until either Apple or Netflix get around to fixing the bug.
from
http://fieldguide.gizmodo.com/the-worst-bugs-in-os-x-yosemite-and-how-to-fix-the m-1652690924 -
I have a newer Sony FS100, What is the best way I can get my footage into a workable format?
It does not appear as an available camera during import mode, and when I try to import my video files any other way they are dimmed out and i can't even click on them. I should hope there will be support in the near future for this camera but until then, is there another application that anyone can suggest that will let me at least work with the video I have?
Nick -
This was my first "big" problem for the last 3 days with iMac and FCProX and my new Sony FS100. To make a long story short: Buy the latest versions of ClpWare amd install it (se end of this note). I got it yesterday after a lot of not-useful inreaction - an then some *very useful interaction* - on this forum.... (and solution came after I began writing to the makers, Divergent.com) - they knew IMMEDIATELY what was to be the solution for me - and told me/lined me to a (new?) version available that, when I got it, fixed all my SONY FS100U import / AVCHD/MTS problems. I was really overjoyed.
To get there took almost all day. But I'm a giant step closer, now. Honestly. That is STEP ONE: get the proper version to import your files...it gets MUCH easier to work with the product once you have the native import issue resolved. Lots...
So, I imported everything from the hi-speed SanDisk 32Gb card, finally, and in beautiful quality, just using the defaut "REWRAP" settings. (I have yet to try to import via the Pro Res or ProRes Proxy settings - but mabe today I will try...time and ENERGY permitting). I feel I need a day off from all of this, completely, after 3 days of angst and disappointment...but ultimately all which lead to a GREAT outcome. So for me it's [next] onto STEP 2: experimenting more with the product features, mastering more of them; outputting the size clips w/effects. etc and quality I want.
This IS a different animal. But I still suppport it and its advent.
One thing at a time...it is a huge learning curve since I am actually working with 3 new technologies all at once (actually more - that have nothing to do with FCProX video, directly...just indirectly....which I won't get into) - but again, below is the link to a FAST middleware transcoder (ClipWrap) that will get your AVCHD files into your Mac. Hopefully it's a fast Mac.
I benchmarkd yesterday on both my Intel core5 iMac (very fast) vs. a slower MacBook Pro Core 2 Duo (?) - both have 8 Gb DRMM; anyway - while the import worked just as well on either machine - seemilngly just about as quickly on the MBPro, too...the playback from that laptop wasn't as [quite] perfect after rendering a clip, out with defaut settings (to keep things simple, for now)....but that ALSO may be because I decided to play devil's advocte while I was at it and imported/exported both the same AVCHD files to an Firewire 800 external HD on the MBPro, and secondly, re-imported. re-rendered and re-expoerted same clip to the MBPro *internal drive*...just to see what might happen in quality or playback speeds of a re-render. While both worked, the playback (via the "422 and H.264 codec output" experiments I did with the same, short 1.06 min. clip - but with NO EFFECTS/transitions with that one, (unlike the iMac verison wich I loaded down, every few seconds, with numerous transitions) - the 1.06 min. test clips WERE, not surprisingly, different in playback. The AVCHD imported to and exported from the MBPro internal HD was a bit more "acceptable" in quality...but the import/export from my much faster iMac (internal HD) tops everything. Hands down. If I do get a Thunderbolt machine...which I MIGHT, God willing and back account still permitting...I hope that new TB 15" fully-qoutfittd MacBook Pro I now have my eye on will result in still-better throughput - and NOT introduce a whole new layer of problems. God - I hope not...then there is LION coming...sheesh! What [new] problems might THAT indroduce???
One needs to experiment a lot here, but once you are able to get the files in from the cam (finally, and easily) - things start to get way better. After that...it's the learning curve of what input / output settings/decsions suit your needs. That is the NEXT BIG curve ahead...for me at least.
I really do like FDProX a lot..a REAL lot...but obviously, like allof us, I am still learing it.
There is a lot to learn, obviously..just read along in this forum! FCProX has its own big "internal" curve to master, when it comes to details.
I found and have been able to use the Precision Editor.. got a first-ever finally and easily) import of several AVCHD native clips "edited"...but got jumbled up - somewhere - (?) in the Precision Editor - and over-duped/dubbed some of the part of the clips I cut up to see what would happen. So the end results with that clp were messed up to say the least...but it did output beautifully...I am still confused about the auto/background renderering and o-going "transcoding and analysis" issue....I sotp it and render out to QT format anyway..it seems to work...tho I id end up with the last moments of the PRditor version misssing the last few seconds...which I did OT deliberatelu splice out and delete!!
Just plain old trial and error...now. Obviously I did something wrong (easy to do in a program as new as FCProX)....but again : I have YET to print out the manual or even read a page of it. So for that - considering how far I've gotten (a "surface scratch" only, still, to be honest) - it's a testament to what the program DOES do by iteself for you that helps you SOME with that learning curve...it's refining the editing/final cut output process for me, now - getting past the kinks or not-obvious pitfalls...I get there...we all will and we'll help one another along....and getting an output that looks and works the way I/we planned for in the final analysis.
We're all stil learning here. Esp. me. I am out of energy. I've been asleep for the last 6 hours...and am headed back to bed. In 10 minutes!
Here is the link to purchase the apparently tweaked and PROPER ClipWare version ($50 - worth it!) - and comment from Divergent; as noted: so, in review - I purchased it yesterday, that solved my AVCHD 1080p60 FS100 SONY cam/raw clip import issues and SAVED THE DAY - for now:
(https://store.divergentmedia.com) - "you'll receive a serial number which will unlock it after you buy it. It'll automatically update to the final release of 2.4.2 when we release that (after Lion ships)", from what I was told by Divergent.
Best of luck,
Mike -
Have lines appearing on my screen and coloured barcodes running across top, what is the cause
Thin lines have appeared running down the length of my screen and colloured barcode type short lines running across the top of my screen. Has anyone suffered this before and knows what the cause is and maybe the remedy?
It could be a hardware problem - bad GPU. Best to take it into your local Apple Store and have them run diagnostics on it... what model MBP do you have (year & screen size)?
Clinton -
"It started malfunctioning so I uninstalled it".
That may have been necessary, may not have.
"I tried to reinstall and there is persistent error in installing. What is the problem?"
No clue.. you've not provided us any details.
"How can I solve this?"
Search these forums or google for the error occurring or post the error so that others can help you. -
hi I have forgotten my power on password and now Ipad has locked me out saying contact I tunes , I have tried doing this nbut it says i need pass code so basically going round in circles.
Place your iPad into recovery mode, which will require restoring your iPad with iTunes which is required when forgetting the Passcode Lock.
http://support.apple.com/kb/HT1808 -
Hi, I tried to start my MacBook Pro are 2 weeks and all I get is a grey screen with a grey no entry sign and a spinning timer. I have tried a reboot with shift cmd and v and it seems to be looping and referring to an external device. Only the power is attached. Can anyone provide advice on how to get past the grey screen? Many thanks.
Does the system automatically back up data?
No.
As you can getto the Recovery partition, you can at least verify your disk using Disk Utility. If it reports that repairs are needed, you can try to repair but I've found that nearly 100% of the time repairing the disk inevitably FAILS. You should be prepared to, 1) buy a new drive for your machine and, 2) buy a good (see here) enclosure for your damaged drive to try to recover data.
After you get everything fixed, use at least two backup methods to keep your data secure. See Most commonly used backup methods.
Clinton -
Hi! So I haven't used iTunes in a few months but I just got an iTunes gift card and want to make a purchase. iTunes redeemed it just fine but now that I want to make a purchase I am having problems. I can't remember my security question answers and iTunes is requesting them. I have two other verified emails but the are NOT rescue emails. I can't contact iTunes over the phone because my phone lines are out and are going to be out for a long time. The only way I can contact them is by email. How can I do this? Is there an easy way to just reset all my security questions? Please help a girl out. I just want my music!
Thanks so muchAlternatives to Reset Security Questions and Rescue Mail
1. Apple ID- All about Apple ID security questions.
2. Rescue email address and how to reset Apple ID security questions
3. Start here to find your country, and how you can contact Apple:
Apple ID- Contacting Apple for help with Apple ID account security.
4. Fill out and submit this form. Select the topic, Account Security.
5. Call Apple Support in your country and ask to speak to Account Security.
Customer Service: Contacting Apple for support.
How to Manage your Apple ID: Manage My Apple ID
Maybe you are looking for
-
Comments on the way people express themselves
Hi, of course this is an irrelevant to the forum topic but it sometimes concerns me and i would like to know what you think about it (of course, if you find it inappropriate feel free to remove it or tell me to delete it ).... The need to write this
-
When creating a GRC Request you have the option to Search for a Role, Profile, or Group. What kind of group would I be searching for? Is this a group that is created on the back end of SAP? The only groups I can currently find are User Groups; and
-
Where can i view the pictures that have been uploaded to my cloud?
Where can I view the pictures that have been uploaded to my cloud? when i log onto icloud it doesnt give me the option to view photos
-
Having trouble finding Character viewer
I am having trouble finding the Character Viewer. I've looked in the Launchpad and also in Finder under Applications. If I accidentally sent it to the Trash and emptied it can I reinstall? OS X 10.8.5
-
MovieClipLoader - broken link in documentation
There is broken url in example for MovieClipLoader class documentation. I saw a link http://www.fakedomain.com/images/bad_hair_day.jpg for few times for example http://help.adobe.com/en_US/AS2LCR/Flash_10.0/help.html?content=00001384.html