I have a mac book pro. It is 3 years old. when I push the button to turn on the computer, it does not start. The little light comes on, but the computer does not start up
I have a macbook pro. It is three years old. It has been working perfectly fine. However, as of yesterday, whenever I push the "on" button, the computer does not turn on. The little light comes on indicating that the computer has started, but there is nothing on the computer screen, and it does not make the usually noise that it makes when it cycles on.
Any suggestions?
Check the battery status to make sure it has a full charge (and that the charger is working). Then make sure the screen backlight is turned up.
If the backlight is up then, try forcing the machine to shutdown (hold the power button for 5 - 10 seconds). Then restart the computer(listen for the start up chime).
If the computer does start up and you still cannot see anything reset the PRAM by forcing the machine to shut down (hold power button as before), then press the power button and start holding the key combo
<Command>+<Option>+p+r
until you hear the start up chime two or three times, then release the keys and allow to boot
Similar Messages
-
My Mac Book Pro will be 4 years old in Sept. I now have Snow Leopard and bought an IPhone 4S this week. I know I need Lion to use ICloud. Can I upgrade to Lion with a computer this old?
As long as it meets the minimum requirements:
Lion System Requirements
Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7, or Xeon processor
At least 2GB of memory
OS X v10.6.6 or later (v10.6.8 recommended)
7GB of available space on hard drive
Some features require an Apple ID; terms apply. -
I have Windows Outlook for Mac on my computer. It froze up tonight, for the first time ever in over a year, and I could not move the mouse, etc. Is there some way to escape from this situation without just turning the notebook off?
Thank you,
MaryPress and hold down the Power button for 5-10 seconds until the computer shuts down. Wait one minute then restart the computer from your Snow Leopard DVD using the "C" key. See the following:
Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer. Restart the computer from the Apple menuitem.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X. -
How do i load windows 8.1 i have a mac book pro
I have a mac book pro OS X maverick 10.9.1
i cant seem to load windows 8.1 any help plsBoot Camp Form: https://discussions.apple.com/community/windows_software/boot_camp
Boot Camp Manuals: http://www.apple.com/support/bootcamp/
Or, use a virtual machine like Parallels, Fusion, or VirtualBox.
Provide more details as to what you want to do and what happens when you try. -
I have a Mac book pro that is giving me the note that it is full.... Trying to back it up...... It's freezing
How full is it? Go to
> About This Mac > More Info… > Storage
Report the free space and the total size of the storage: xxx GB out of xxx GB.
Recovering Disk Space
If you have less than 10 GB you definitely need to delete or offload some files or purchase a lager disk or SSD (see below). You may want to maintain at least 20 GB of free space so when your disk starts filling again it will have some room before it hits that 10 GB mark again. More headroom is better. If you let the space fall much below 9 GB you might not be able to boot your machine.
Initial easy steps to gain disk space:
- Delete all files in the Downloads folder.
Empty the Trash.
- Start iPhoto.
Empty its trash.
Restart.
- Restart in Safe Mode:
Restart the computer.
As soon as you hear the chime press and hold the right shift key.
Be patient. Hold it down until you see the Apple icon.
Empty the trash.
Restart in normal mode.
- Delete "Recovered Messages", if any.
Hold the option key down and click "Go" menu in the Finder menu bar.
Select "Library" from the drop down menu.
Library > Mail > V2 > Mailboxes
Delete "Recovered Messages", if any.
- Empty the Trash.
- Restart.
- Re-index your system disk (Macintosh HD):
http://support.apple.com/kb/ht2409
Additional reference on freeing disk space:
http://pondini.org/OSX/DiskSpace.html
How much disk space is available now?
Normally you should backup before proceeding to delete other files but at this point it may not be possible. Having taken the steps above will the backup compete now? If not, stop, post back, for emergency data protection procedures and/or how to free more disk space. -
i have a mac book pro with os x 10.5.8.......sometimes will not load google or yahoo, or any other search engine, but will load regular sites.....why is this?
Check System Preferences - Accounts
Choose you account - login items: If iTunesHelper
shows up - remove it it will prevent re-installation.
It did not have iTunes in the list, just mail and iCal alarm. Deadlines and emails are vital in my home office.
Now that I think about it, adding Mail to the list was the only thing that I had changed to the computer when this happened, but I can't imagine how that would alter permission to install on the OS.
Eric
Note: I saw a G5 1.2 for $1,500 CAN. I was tempted. -
I have been trying import VHS video into iMovie via a Hollywood Dazzle bridge. I have been successful doing this in the past, but now it is not working. I have a mac book pro, 10.9.1, (mavericks), iMovie 10.0.2. Everything in iMovie looks like it is working. It reads "recording" in the upper left hand corner of the pane while the video is playing. When I stop the process to check on my clip it says that the file is empty. The only thing that has changed since I did it successfully is that I upgraded to mavericks from whatever I had previously. My system is about one year old. Any suggestions?
Hey, Clinton,
Thanks for your help! I was able to go to iMovie 9.0.9 and import video. I was still curious as to why it didn't work in version 10.0.2, so I contacted Apple tech support. They were't sure at first as to why it wouldn't work, so they had me delete iMovie 10.0.2 and then re-install it just to see if something had gone wrong when it upgraded. That didn't change anything. In the end, they determined that 10.0.2 doesn't support the Hollywood Dazzle DV bridge. But I have a workaround path from them that I will share so that it's possible to import to 9.0.9, then move it to 10.0.2.
1. Open iMovie 9 (finder/applications/iMovie 9.0.9
2. Import from Dazzle Bridge to iMovie 9, note which event you are importing the clips into
3. Close iMovie 9
4. Open iMovie 10 (probably in the dock)
5. File/Import Media...navigate to home(this was my name, on the left side of iMovie, under Favorites)/Movies/iMovie events. Find the event folder that contains your Dazzle clips (tip-try sorting by date modified to look at recent events.)
6. Select the clips and import. Click the blue "Import Selected" button on the bottom right.
You may get a message that some files cannot be imported. Click continue import. It's a little glitchy. It imports your clip, and also makes a copy of it, too. On the copy, the audio is normal, but the video is choppy. In any case, you would delete the copy, anyway.
Hope this additional information helps somebody else. Thanks again, Clinton for helping me! -
Hello,
I am trying to connect my laptop to my TV. The computer flashes blue after I plug the cable in but the TV says there is no signal.
I have a Mac Book Pro 2009 and a Samsung 32" Class (31.5" Diag.) 450 Series 720p LCD HDTV (2010 model).
I am using a mini display port to VGA adapter. I have sucessfully hooked up boh devices but it stopped working after a handful of times. I was wondering if there is anything I can do to fix the problem or is my cable broken?Some things you can try.
Startup Issues - Resolve
Startup Issues - Resolve (2) -
I have a Mac Book Pro with 10.6.8 and want to back up my files using a flash drive. It says I did it but when I tried to check on my other Mac - an I Mac with 10.5.8, thedata does not seem to be there. I cant see photos, etc.. It shows the backup as a file and shows various system info. but there are no photos or other files shown.
Thanks for any advise.
MikeA PowerPC Mac, if that's what it is, won't be able to see an Intel Mac's formatted data. Also ExFat formatting is not supported by 10.6.3 or earlier. I would try viewing the backup on another Intel Mac with at least 10.6.4. If it isn't there, then the backup never really took place. I much profer a hard drive with Carbon Copy Cloner.
-
have a mac book pro that crashed. ran disk utility to repair. comp booted and ran for short time. then crashed. ran repair again. disk utility said it could not repair disk and needed to format and start again.
comp said it could not unmount disk and now when comp trys to boot all i get is a question mark on the screen. helpErase and Install
1. Boot from your Snow Leopard Installer Disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed.
4. Quit DU after formatting completes and return to the installer. Install Snow Leopard.
5. After restart into Snow Leopard download and install Mac OS X 10.6.8 Update Combo v1.1. -
Hi, I have a mac book pro running mavericks and recently tried to connect to a 3rd gen apple tv but the airplay icon is not showing up in the top bar. I then tried my girlfriends laptop running mountain lion and it showed up straight away. Any suggestions?
How old is the MacBook Pro? AirPlay is only supported on 2011 and newer models, due to the requirements it has in hardware for graphics acceleration.
-
hi i want to buy me a mac and do not know if I have a mac book pro or mac book are extrer with CD drive
Try posting in your native language, someone can probably translate.
-
I have a mac book pro running Lion 10.7.4 and every time I use Google Earth The computer crashes by lowering a black curtain and then asking me to hold the power button down until it closes and press the power button again to restart it. Can I fix this? It bugs me when I'm looking at real estate.
I really don't have an answer for that one. I guess that while trying to get things working correctly, I would use the most basic monitor I had which in your case would be the Eizon using the Thunderbolt port and adaptor.
When you boot into Safe Mode the startup is quite slow, but you should get the Apple logo and then the spinning gear below it (release the SHIFT key when it appears.) Then after a little more time you should see a gray progress bar appear below the spinning gear. When that disappears the computer will startup to a login screen. -
I have accidently shut down my Mac Book Pro during windows 7 installation . When I re started it it began to say " Press any key to boot from CD or DVD " but the keyboard is not working . So I cannot boot It and the CD is also in the drive . Please help me to boot back to Mac book Pro and give me a way to start the key bord .
Hey rudreshchoubey,
Thanks for the question. The following resource may help to resolve your issue:
Boot Camp Installation & Setup Guide
http://manuals.info.apple.com/MANUALS/1000/MA1636/en_US/boot_camp_install-setup_ 10.8.pdf
If Windows doesn’t install properly
Verify that you’re using an original, full version of the 64-bit version of Windows 7 Home Premium, Windows 7 Professional, Windows 7 Ultimate, Windows 8, or Windows 8 Pro.
Restart your Mac and hold down the Option key until one or more disk icons appear on your screen. Insert the Windows installation disc into the optical drive or insert the USB flash drive with Windows into a USB port on your Mac. Select the Windows installation disk icon, then click the arrow beneath it. Quickly press any key on your keyboard to start the installer. Follow the onscreen instructions to repair or reinstall Windows.
Thanks,
Matt M. -
Hello
I have a mac book pro (lap top) and it’s version is 10.6.8.i want to up grade it to 10.9.2. version .i downloaded version from apple store twice and it is un able to installing; give me error massage of installing.the error has not any number and it says :installation can not be complete with a red sign. please say the solution.also how i can get the 7.0.0. version up date from apple store . i searched very much but i did not find the version .What MacBook Pro model do you have? Check the apple, left side of the menu bar, About This Mac, More Info, System Report, Hardware and then the Model Identifier...has to be at least MacBook Pro3,1 to install Mavericks.
Maybe you are looking for
-
What do I need to play my guitar into garageband?
Just got my macbook pro and I play guitar and I found out that this neat app garage band is on here, but I don't know what exactly do I need to connect it to the mac book. Is it best to use and audio interface and if so which one? and will any audio
-
Can we read a file which is serialized in MFC using Java
I have a file in which Serialized data is stored using an MFC application (object of CArchive). 1. Is it possible to read this file using Java and to retrived the data. 2. Is yes, which all Java-classes will be needed to explored. Thanks -Vini
-
Setting print margin for a pdf document
How to set margin in a pdf document for printing?
-
Problem starting OEM 9.2.0.1
Hi there, I frequently experience Problems when I try to start the OEM Console 9.2.0.1 on a Server running MS Windows Server 2003 R2 SP1. The first dialog opens, prompting me to choose Standalone Mode or Management Server Login. After making my choic
-
the new itunes will not sync new music to my ipod? help!!!