I have a mac computer and since it did the updates, my browser isn't working. How do I fix this?
My mac computer did an update with the Lion software, since then, the browser isn't working at all. How do I fix this?
'''Try the Firefox Safe Mode''' to see how it works there. The Safe Mode is a troubleshooting mode, which disables most add-ons.''
''(If you're not using it, switch to the Default theme.)''
* You can open the Firefox 4.0+ Safe Mode by holding the '''Shift''' key when you use the Firefox desktop or Start menu shortcut.
* Or use the Help menu item and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
''Don't select anything right now, just use "'Start in Safe Mode"''
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before using the Firefox shortcut (without the Shift key) to open it again.''
'''''If it is good in the Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one.
Please follow the [[Troubleshooting extensions and themes]] article for that.
''When you figure out what's causing your issues, please let us know. It might help other users who have the same problem.''
Similar Messages
-
Trying to download Lightroom onto a new iMAC and my serial code isn't working - how do I fix this?
What does "isn't working" actually mean? Any error message?
-
I have an IPhone 5S and after IOS 7.1 update, touch ID isn't working!!
I did the update of ios 7.1, and now my touch id isnt working! Even reading new prints!
Go into Calendar and click on Calendar on the bottom center of the page. That should list the calendars on your device. Down at the bottom of the list is "Other". That should display which Holiday calendar is on your device. As far as how it is selected, I cannot be sure of that, but I would tend to believe it has to do with your regional settings.
What troubleshooting have you tried on the device? -
I'm not sure what happened but my iPad wont send pics on iMessage anymore. Yesterday it sent just fine, but today it fails everytime. How can I fix this?
Try a reset: Simultaneously hold down the Home and On buttons until the device shuts down. Ignore the off slider if it appears. Once shut down is complete, if it doesn't restart on it own, turn the device back on using the On button. In some cases it also helps to double click the Home button and close all apps from the tray before doing the reset.
-
I updated quicktime a few days ago and now I keep getting error 2048 whenever i try to play back my Maya file after saving it as a qt movie. I had no issues with this before I did the update, after the update I keep getting the error 2048 message. QT will play my earlier Maya movies and other video, it just won't play back my latest work. Help me please, I need this for school.
The 2048 error message usually suggests the files use MPEG-2 format which is not supported natively on Windows via QuickTime without the additional MPEG-2 Playback Component ($20 from Apple).
-
For some reason when I open iTunes, and try to access the itunes store, help, my account, or anything else I get a message saying that I'm not connected to the internet, even when I know that I am. What's wrong?
Close your iTunes,
Go to command Prompt -
(Win 7/Vista) - START/ALL PROGRAMS/ACCESSORIES, right mouse click "Command Prompt", choose "Run as Administrator".
(Win XP SP2 & above) - START/ALL PROGRAMS/ACCESSORIES/Command Prompt
In the "Command Prompt" screen, type in
netsh winsock reset
Hit "ENTER" key
Restart your computer.
If you do get a prompt after restart windows to remap LSP, just click NO.
Now launch your iTunes and see if it is working now.
If you are still having these type of problems after trying the winsock reset, refer to this article to identify which software in your system is inserting LSP:
iTunes 10.5 for Windows: May see performance issues and blank iTunes Store
http://support.apple.com/kb/TS4123?viewlocale=en_US -
Need assistance, does anyone know if there is a fix for using 10.9.5 and after effects cs6?
There are several threads on this exact problem on this very forum. Keeping my answer is simple as I can, the solution is to run the CS6 update.
-
I have an iphone 4s. I have a mac computer and a pc. Most of my itunes library is on my pc, but when I try to add music to my phone from my library on the pc, it won't let me do it. I CAN add music from my library that is on my mac, same account. My husband has the same problem with his iphone 4, but only uses pc.
My husband and I are using the same iTunes account on all mac & pc computers, but the libraries are different on each machine. We always manually manage our music (no auto sync). iTunes is up to date on the PCs. My husband uses our joint iTunes account on his pc, but once again, has a different collection in his library from those on the other machines. He can't load any music from his PC to his iphone 4. I can load music from my mac library to my iphone 4s, but cannot load from my pc library to my iphone 4s. How can I switch my main library that it syncs with from the mac to the pc?
Thanks -
I have a Mac computer and 2 ipods all using the same apple ID. I just bought an iphone5 and now want to use same apple ID but I can't it says I cannot connect to server.
Personally, I'd keep it simple and keep the same one.
-
I have a Mac computer and am trying to use a Photoshop CS4 program, but after accessing my desktop files through Adobe Bridge and clicking twice on any of the pictures to get into Photoshop, instead of entering photoshop, I get on the lefthand side an enlarged version of the picture with red, yellow and green buttons on top. Any suggestions on what is wrong, or what can be corrected ?
And there is the problem. Your pictures are opening up in Mac's own Preview app.
Do you want all your jpegs to open in Photoshop, or only when you are in Bridge?
Selecting a program to open a certain file is called: File Type Association.
You can choose this at the MacOS level or the Bridge level.
Here's how to do both:
Either MacOS or Bridge has the wrong app associated with the jpeg. Let's start with MacOS
Close Bridge and Preview. Select one of your jpegs, and press Cmd i, That will bring up the file info window.
Go down to the "Open with" section of File Info.
Choose Photoshop CS4 and click on the Change All... button to apply this choice to every jpeg on your Mac.
Then open Bridge and see if double-clicking opens it in Photoshop.
Now that means all jpegs on your Mac will open in Photoshop. Maybe you don't want that.
You can set your jpegs to open in Preview when Bridge is closed.
When you open Bridge, there is Preferences > File Type Associations where you can direct Bridge to open the jpegs in Photoshop when you are viewing in Bridge. -
I have a Mac computer and I edited my images in the Finder Pictures. Now. I want to transfer the edited images to Bridge.
Bridge is just a file browser. It does not contain any photos inside the application itself. Bridge will see and display your photos wherever you put them.
You cannot "transfer the edited images to Bridge". That is wholly nonsensical. Just use Bridge to navigate to your image files, wherever you put them. -
I have a mac computer and recently the printer says initialising and I cannot print or copy
I have a mac computer and recently the printer says initialising and I cannot print or copy.
The problem has become worse recently and now willonly print a couple of sheets before going to 'initialising'. I.ve moved the printer, changed sockets completed endlessly the directions from HP.
Any ideas.Sorry that you are having a problem with the printer initializing.
What type of printer do you have?
You may need to clean your print head. Sometimes when the print head is clogged or dirty, it will go into initializing because it is not reading the cartridges correctly.
Do you have a detachable print head? If so, you can take the print head out and manually clean with lint free cloth and water.
**Click the KUDOS star on the left to say 'Thanks'**
Please mark a reply "ACCEPTED AS SOLUTION" if it solved your problem, so others can find it. -
I have a Photopshop Elements 10.0 on my Mac, I purchased it in English, did an upgrade of my Mac to OS Yosemite and suddenly the language of Photoshop is German. How can I fix this ?
I have found another solution. I upgraded to Yosemite and found the the App Store version of PSE 10 (which didn't change) was suddenly in German. Close PSE if it is open. Use the Finder and go to the PSE 10 application in the Applications folder. Right click (or ctl-click) on it and select "Show Package Contents". Then go to Contents>Locales and delete the de_DE folder. (I imagine you could also rename it to something starting with a letter after "e". I think PSE is probably using the first language it comes to in this Locale folder.) Start PSE. It worked for me. Hope this helped.
-
i have a Mac i5 and need to download the application 'Numbers' but everytime I try to do so, it says can't do as the ver 2.2 for the app needs new software 'Snow Leopard'. I don't want to upgrade but dont know what to do??
If your profile is correct you're already on the final version of Snow Leopard (10.6.8). Sure it wasn't Lion it was asking for?
If that's the only version available on the app store, you'll need to source a copy of the iWork '09 DVD - not cheap now - only available via Amazon or eBay etc. -
I have an iPhone 3gs and since I made the 6.01 update everytime I want to join a wireless network I get the same error "incorrect password" when I now it's correct, any one have a solution for this? Tks
I would say that you would want to look into the "Exchange Mode" for GMail. That would allow your iPhone to sync calendars, contacts and email with GMail just fine. Doing the same with your outlook should also then sync those same with your PC using Outlook. I've done teh iPhone side of this, but I since I don't run Lookout for my email client, I'm not sure how that will work on the PC side.
Maybe you are looking for
-
Lightroom 3: How-to books? (not videos or online tutorials)
When learning a new software, I prefer to have a hard copy book on my desk that I can flick through, read and apply suggestions as I work with the software. In this way, many little extra tips and processes stick in my mind to help me learn it quickl
-
Ejb directory structure plz...
hello , i am new to ejb and i written my first ejb program ... a stateless session bean program(just a small application) as a part of my acedamic lab exercise. i have 1 java bean program,1 client program which is jsp, and a home and object interface
-
No webpage's on Safari or firefox.
Imac with snow leopard, and a time capsule for connection to the internet. Always worked well, but for 4 days a can't open any website. Checked all settings with a apple laptop, and they are the same. The strange thing is I have skype and it works ok
-
Error while Running BRS Batch input session
Dear Gurus, When i am running Batch input session after BRS statement posted, system giving Error message: <b>No batch input data for screen SAPDF05X 3100</b> Entered, saved and posted the statement. after that while processing session getting error
-
10g XE (univ) install on OEL - no web application
Hi Guys, I seem to have a common install problem, but I can never seem to find a resolution to the problem. I have a clean Oracle Enterprise Linux 5 install on a VM. I have installed the 10gXEuniv rpm on this, which seems to have gone in fine. When I