I have a Mac G4 double mirrored model and everytime I shut it off it will not go on when I hit the power off button. However, if I unplug and plug in the power cord it boots fine and everything is OK. The PMU and logic board have been reset. Any ideas?

I have a Power Mac G4 double mirrored model and everytime I shut it off it will not go on when I hit the power on/off button again. However, if I unplug and plug in the power cord it boots fine and everything is OK. The PMU and logic board have been reset. Sometimes my Mac goes on just by pressing the power on button but most times I have to pull the power cord and put it back in. Any ideas or help out there for this? Could it be a failing power supply? Apple Care says that this model is obsolete so there is no help from there. John
<E-mail Edited by Host>

Hi John,
That's often a sign of a bsad Capacitor in the Power Supply, but...
Might be time to replace the PRAM Battery, 4 years is close to their lifespan, far less if ever without AC power, & can cause strange startup problems...
http://eshop.macsales.com/item/Newer%20Technology/BAA36VPRAM/ 

Similar Messages

  • My I Tunes account will not open. When I hit the icon , nothing happpens, any ideas?

    my I Tunes account will not open when I hit the icon at the bottom of the screen. All other icons are fine.Any Ideas/

    I resrted and that did allow I tunes to open, by "force quit". However, it took away a lot of my downloaded items, like recently added or recently played. Is there a way to retrieve these?
    Ken

  • Macbook pro freezes every few seconds. replaced the HDD, ram, logic board. to no avail. any ideas?

    i have a late 2008 macbook pro. it freezes-up (more like slows down) for just a moment every 5 seconds or so. the problem has been there since i originally purchased it, but due to school, i never got around to fixing it til now. i've taken it in to apple several times (6 or 7). this last time i was there, they replaced the logic board, harddrive, and ram, and even the screen (for hot spots, unrelated). but no success. it hasn't gotten any better at all, and now, in addition to all that, the screen blacks out occasionally too.
    does anyone have any idea what's happening here? where else could the problem be?

    i have a late 2008 macbook pro. it freezes-up (more like slows down) for just a moment every 5 seconds or so. the problem has been there since i originally purchased it, but due to school, i never got around to fixing it til now. i've taken it in to apple several times (6 or 7). this last time i was there, they replaced the logic board, harddrive, and ram, and even the screen (for hot spots, unrelated). but no success. it hasn't gotten any better at all, and now, in addition to all that, the screen blacks out occasionally too.
    does anyone have any idea what's happening here? where else could the problem be?

  • I have made an imovie on my ipad and for some reason the final edit will not keep. When I open the actual projct to edit, it is the way I want it, but when I look at the actual movie

    I have made an imovie on my ipad and for some reason the final edit will not keep. When I open the actual projct to edit, it is the way I want it, but when I look at the actual movie and what loads up to youtube is the version prior to this final fix. I have tried fixing it at least twenty times. The open to edit version has the video the way I want but when I upload it to youtube, its not the version I want to show.

    Well, assuming all of the above, Notifications, etc., it just might be time for a visit to the Apple tore genius center for a session with the techs.  See if it is a fault in the hardware or just an iOS reinstall is the answer.
    One more thing you could try, backup so you have a record of content, then restore to factory conditions be an Erase All Contents and Settings.  Then restore from the backup you just made.  That has helped some with WiFi problems, may be it would work with your problems.
    But with that behavior of another app with problems, the geniuses looks like a less stressful thing to do.

  • My iMessage screen is locked horizontally and will not rotate. When I access the camera through iMessage it will not rotate either. Any help with this will be very much appreciated.

    My iMessage screen is locked horizontally and will not rotate. When I access the camera through iMessage it will not rotate either. Any help with this will be very much appreciated.

    Hi MikeyGway,
    If you are having rotation issues on your iPad, you may find the following articles helpful:
    iOS: Screen does not rotate
    http://support.apple.com/kb/ts3805
    iPad: Understanding the side switch
    http://support.apple.com/kb/HT4085
    Regards,
    - Brenden

  • HT1338 I have hand this Mac for 4 years. Today for the first time mail will not do anything when I hit send. It is receiving but it will not send. Can anyone help?

    I have an IMac running on 10.6.8 and today for the first time mail will not do anything when I hit send. Can anyone help out there?

    Check your Window menu -> Activity menu to see if anything is really not happening.  If it isn't happening, check your settings.

  • I am using Aperture V3 and have a caption included at the foot of each photo. I want this caption included when I export the photo to another device (eg iPad). Any ideas on how to do this would be appreciated.

    I am using Aperture V3 and have a caption included at the foot of each photo. I want this caption included when I export the photo to another device (eg iPad). Any ideas on how to do this would be appreciated.

    The "caption" is metadata.  Metadata is included in most image-format files.  How it is displayed is determined by the program you use to show the picture on the computer screen.  You currently have Aperture set to "over-lay" the caption at the bottom of the Image.
    What program are you using on your other devices to show the files?

  • When I choose external editor in iPhoto on my iMac it does not recognize Aperture. When I do the same on my laptop it works? Any ideas?

    When I choose external editor in iPhoto on my iMac it does not recognize Aperture. When I do the same on my laptop it works? Any ideas?

    No idea, but Aperture is not an external editor. Like iPhoto, Aperture is a Photo Manager. It's a database. There is no way to round trip a shot from iPhoto to Aperture and back again like you can with Photshop or an image editor.
    Given that Aperture does pretty much everything that iPhoto does - and a whole lot more -  it begs the question: why not just use it to manage your photos?

  • My iphone will not switch screens when I push the button

    my iphone will not switch screens when I push the button

    -try restarting the device
    -reset the device
    -restore the device as new
    -replace the device

  • My iMessage will not come on. I hit the switch to on and it automatically goes back to off. Help!

    Every time I try to turn on my iMessage it will not come on. I toggle the switch from off to on and it automatically goes back to off. I've made sure that there are no restrictions on and every other thing I could think of, but still to no avail. Anyone have any ideas as to what the problem could be?

        Thanks for your efforts, jcma323. I'm going to send you a Direct Message. We'll get to the bottom of this.
    ChaunceyM_VZW
    Follow us on twitter @VZWSupport

  • HT4946 My iphone won't open, message on screen states iphone is not backed up. when I hit the ok button it remains locked. what can I do?

    My iphone won"t open. There is a message on the screen that states that iphone is not backed up. when I click the ok button nothing happens. It was workin until today.

    By "open", I think you mean you cannot unlock your iPhone.
    If that's true, here's the remedy:
    http://support.apple.com/kb/HT1212

  • Firefox will not load up when i click the icon on my desktop, but still the same problem, i have checked and its loaded in the task manager and just wont load up, any help on this matter is strongly welcomed thank you mark

    as said nothing happens, i click the icon and nothing loads up. i have used 3 anti virus and spyware malware etc etc for 3 days i have been trying this, please note this install of windows 7 is fresh 5-6 days old. firefox was working fine then one day i tryed it and nothing.

    Hi,
    a) I don't have DMG either in applications but I have '''Document''' instead.
    So '''set "Document" to Always Ask '''going to Firefox>Preferences>Applications
    Now it will always ask if you want to Open or Save the file.
    b) If already downloaded, check what's under Get Info > Open with
    It should say Open With DiskImageMounter (see pic)
    https://support.cdn.mozilla.net/media/uploads/images/2014-07-24-03-56-33-60e1a9.png
    If not, select it. It's in Home>System>Library>CoreServices.
    See if it helps.

  • Can someone help me understand why the search engine will not do anything when I click the search icon or press enter, and why new windows won't open when I click on a link that should open one?

    When I type something in the search engine at the right hand corner of the screen it will not allow the search to take place. What I mean is I either click the icon or press enter and nothing happens. I would understand it better if it at the very least gave me a error message. I have also noticed that things like the opening of a new window via a link will not work. An example is I was just on www.walmart.com and when I clicked on an image in order to see a larger one no window opened. I also recently noticed that when I had a lot of tabs open the shortcut menus and menus in general did not load completely or really at all keeping me from saving the pages as bookmarks. I know this could be from low internet speed, a lot of tabs etc..., but I've had many more tabs open than I had then and it worked. Plus all I did was delete or close one tab and suddenly it worked. I then recovered the tab and it still worked even though I was back at the original amount of tabs. I have the latest version of firefox, not counting the beta, and I don't know of any way to solve the two main problems.

    Start Firefox in [[Safe Mode]] to check if one of the add-ons is causing the problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
    * Don't make any changes on the Safe mode start window.
    See:
    * [[Troubleshooting extensions and themes]]
    * [[Troubleshooting plugins]]
    If it does work in Safe-mode then disable all extensions and then try to find which is causing it by enabling one at a time until the problem reappears.
    * Use "Disable all add-ons" on the [[Safe mode]] start window to disable all extensions.
    * Close and restart Firefox after each change via "File > Exit" (Mac: "Firefox > Quit"; Linux: "File > Quit")

  • My replacement iPod will not sync. I've purchase new songs and albums and can see them on my PC. but they will not sync. When I select the devises from the menu the Sync is greyed out..

    I just had to replace my classic iPod, lost all my music (except previously purchased). New (refurbished) iPod will not sync the new music I've just purchased or the CD's I've uploaded. When selecting the Devises in the menu, Sync is greyed out. I need help. When I plug my iPod into the PC and is shows it is syncing it only picks up my previous music,

    See this article how to transfer your data? How to back up your data and set up as a new device
    Make sure your new computer is authorized in iTunes. Disable autosync in itunes, connect your ipod, right click on it in the device list and choose backup.
    This will save data, pictures and settings to itunes. See what's included in this backup here: http://support.apple.com/kb/HT1766
    Transfer your purchases the same way to copy all apps and bought media from the Store to your computer.
    Set up at least one contact and event on your computer to be able the merge your calendars and contacts after your ipod got wiped during the first sync.
    The rest of the data can be restored from the backup you made.
    Restoring: http://support.apple.com/kb/HT1414
    As mentioned by vazandrew, music is one way only, from the computer to your device, unless you bought the songs in itunes and transferred your purchases.
    There is 3rd party software out there, but not supported by Apple, see this thread: http://discussions.apple.com/thread.jspa?threadID=2013615&tstart=0

  • HT201272 I pre-ordered a book.  Will not download.  When I follow the instructions and click download is states you have already purchased. Any ideas??

    P re-ordered a book from the app store.  notified to download.  When I follow the steps to download it states you have already purchased.  Any ideas??

    Does it show in the Purchased tab in the iTunes store app on your phone, and/or the Purchased link under Quicklinks on the right-hand side of the iTunes store homepage on your computer's iTunes ?

Maybe you are looking for

  • DATA BASE TABLE AND INTERNAL TABLE

    Dear Friends, please help me out in getting complete information about database table and internal table. you can email me at < Removed by moderator - please maintain e-mail iDs in Business Card> Message was edited by:         Arun Varadarajan

  • How to determine current state of resource group?

    Good morning! I'm in the process of creating a monitoring policy which would alert if a specific resource group is in a state other than "online". Is there a command line executable available that I could utilize which would return the current status

  • Is there any api to update quantity in sub inventory

    Hi All, I want to transfer quantity from one sub inv to another sub inv and also i need to update the sub inv quantity.Please help me. Regards Kumar.

  • Submit data to an ABAP program from an offline form

    Hello Forms experts, the requirement goes like this: I have an internal table that will be passed to the form (via interface context) in the form the data will be changed by the user and the changes must be reflected in the internal table.- I have to

  • Simple master data loads

    We just completed upgrade to NW 2004s.  I am trying to do simple Loads of data to InfoObjects that have Master Data Text-only. When I try to connect the Datasource to the InfoObject, the system requires that I change the InfoObject to be an InfoProvi