I have a mac- I downloaded photoshop and it's been downloading or two days now.. It is on 28% now. I just cancelled it and tried to download again but it doesnt seem to be going any faster.. anybody know what the deal is?
I have a mac- I downloaded photoshop and it's been downloading for two days now.. I cancelled it and tried downloading again but it is't going any faster.. anybody have insight on this?
Could you please confirm the version of Mac computer and Photoshop application which you are trying to download ?
Similar Messages
-
have produced DVD using iMovie, now want to download this back to iMovie, will not read DVD, have been told a piece of software available - any chance anybody knows what?
Handbrake is not ideal for this.
You need to convert the VOB files in the TS-Folder of the DVD back to DV which iMovie is designed to handle. For that you need mpegStreamclip:
http://www.squared5.com/svideo/mpeg-streamclip-mac.html
which is free, but you must also have the Apple mpeg2 plugin :
http://www.apple.com/quicktime/mpeg2/
(unless you are running Lion in which case see below))
which is a mere $20.
Another possibility is to use DVDxDV:
http://www.dvdxdv.com/NewFolderLookSite/Products/DVDxDV.overview.htm
which costs $25.
For the benefit of others who may read this thread:
Obviously the foregoing only applies to DVDs you have made yourself, or other home-made DVDs that have been given to you. It will NOT work on copy-protected commercial DVDs, which in any case would be illegal.
If you are running Lion:
From the MPEG Streamclip homepage
The installer of the MPEG-2 Playback Component may refuse to install the component in Lion. Apple states the component is unnecessary in Lion, however MPEG Streamclip still needs it.
To install the component in Lion, please download MPEG Streamclip 1.9.3b7 beta above; inside the disk image you will find the Utility MPEG2 Component Lion: use it to install the MPEG-2 Playback Component in Lion. The original installer's disk image (QuickTimeMPEG2.dmg) is required.
The current versions of MPEG Streamclip cannot take advantage of the built-in MPEG-2 functionality of Lion. For MPEG-2 files you still need to install the QuickTime MPEG-2 Playback Component, which is not preinstalled in Lion. You don't have to install QuickTime 7. -
we have mac running with OS X 10.6.8, it isn't able to connect to our ipad air. does anybody know what the problem is?
Macs on OS 10.6.8 cannot link with a device running iOS7. You will need Os 10.9 Mavaricks on your Mac.
-
Hi,
when I try to download any APP I receive Error Code: 1009
I try it with itunes
Does anybody know, what the code 1009 means?
Thank you for helpingWhat country are you from?
1009 usually means your IP address originates in a country that does not have access to an App store. -
Keep having isues trying to download music...Message states we could not complete Itunes Store request. The Itunes store is temporarily unavailable Please try again later. It has now been 3 days. Anybody know what the fix is..Cheers
Hi, bradley158.
Thank you for visiting Apple Support Communities.
Here are a the best troubleshooting articles when experiencing issues download content from the iTunes Store.
Apple software on Windows: May see performance issues and blank iTunes Store
http://support.apple.com/kb/TS4123
Can't connect to the iTunes Store
http://support.apple.com/kb/TS1368
iTunes: Advanced iTunes Store troubleshooting
http://support.apple.com/kb/TS3297
Cheers,
Jason H. -
helo, anybody knows what the chipset controller of the firewire port's mac book pro 13 i5 i7, please, thanks!
Try the notebook forums, not the workstation community.
http://www.apple.com/support/macbookpro
or Google -
Anybody know whats the system requirement for installing SAP in my home pc.
anybody know whats the system requirement for installing SAP in my home pc. I have p4 processor with 1 GB Ram. I can increase the ram to 2 GB. Please help
Hi friend,
Check your RAM , even for 4.7 version you need 1gb ram for better speed, 80gb sap only will occupy, for other storage you need to maintain another hard disk, or add new hard disk with your existing hard disk to make it 120 or 160, if its 6.0 then sap only occupies 6.0, then you need some more space for additional data, you cant browse internet on sap-server (which you installed), for internet and general purposed you need to seperate the hard disk, in case of 6.0 and you want to use both internet and sap you need to have 240-300GB HDD & 2GB ram, inter core2duo processor, 3.15ghz processor etc...and if its 4.7sap and other Operating system you need to have minum 160GB hard disk and 1gb RAM for better speed and access...
clarify if any doubts are there, system performance improves with good RAM memory...
reward if helps
krishna -
I updated to a newer itunes version and now itunes will not let me play a bunch of my music. ***? anyone know what the deal is with that?
How could anyone possibly know as you've provided no details.
What happens when trying to play the media in question?
Any errors?
Is there an ! to the left of the media? If so, this means iTunes is unable to locate the media file. -
well after updation to ios6.0.1 My wifi button has turned to grey mode ,i cant turn it on at all and when i tried to restore it my battery life turned in short life period .,,,i dnt know what the heck is this..pls help
The reapair shop is probably responsible. And now that you took it to a third party and not to apple store, Apple will not touch your phone at all. So you will probaly have to buy a new one or go back to the reapir shop and hope they can fix it.
-
Does anybody know what the phrase can't find driver mean?
I have a PowerMac 4,2 and it won't start up for me It goes to a black and white screen and has the words panic,and unable to find driver
for this platform. Does anybody know what that means,and what do I have to do to fix it. Thank you and have a great day DaleIt means you have likely installed something for Intel Macs that runs at startup that won't work with that Mac. If you moved a hard drive with Mac OS X 10.6 or later on it to the Powermac, that would cause such a problem. If you connected a hard drive with 10.6 or later on it on it that was running Target Disk Mode (booting the Intel machine holding the T key) to it, that would cause such a problem. If you attempted to install 10.4.4 or later system specific disc on a hard drive that was designed for an Intel Mac, and moved it to that machine, that would cause such a problem. If you attempted to install a GUID formatted partition hard drive as opposed to Apple partition map on the machine, that could cause such a problem.
-
Anybody know what the iPad Air's touch resolution is?
Not display rez, touch rez. I've searched and searched and I can't find any info on this.
I just bought my Air less than a week ago and one of the things I hope to do with it is to use it for some fairly detailed sketchwork. I have been told not to expect much, but I'm thinking that, dang it, it's an Apple! And isn't Apple supposed to be the preferred computer brand for the art crowd? So it just seems to me that, since it's a pad and all, it should be a halfway decent instrument for artwork. After I received it, the very first thing I did was order a pressure-sensitive stylus for it. Should be here in a day or two.
I've played around some with the free Autodesk app, Sketchbook. It seems decent, but trying to draw with my finger is just not what I want. I've done some tests with my finger and thin lines, though, and at a 1x screen zoom factor, I'm able to get some precise placements with my finger if I'm careful and paying attention. What I did was I drew a cross, then placed the tip of my index finger, dead center at the crux of the cross and then drew away from the center at a straight angle. First try, the line I drew began exactly at the center of the cross. I sort of have to bend to the side and look at my finger at an angle so the finger itself isn't in the way. But when I do that, I'm able to place it accurately. So just using this simple sort of test, it appears that the touch resolution is quite a bit better than at least one estimate I heard -- like 5 or 10 lines per inch. Heh. More like 100 lines per inch, I'm thinking. I've also done a few other quick sketches and near as I can tell, I can place my lines accurately. Seems like if the rez was only 5 or 10 lpi, I wouldn't be able to do that. I can live with that 100 lpi figure even though it's incredibly coarse compared to a decent Wacom Cintiq, like the 12hx, I think it is.
Still, knowing the Air's actual touch resolution would be a big help in either confirming or disproving such comments as I mentioned above. So if you happen to know what the touch rez is for the Air, care to let me in on it?YYosemite is a Mac OS and it doesn't run on an iPad. You cannot delete or install Safari on the iPad. It is on your device somewhere.
Swipe from screen to screen to look for it.
Check Settings>General>Restrictions and make sure that you didn't disable it.
You can also reset the home screen layout and the icon will reappear - but the home screen will return to the way that it looked when you first activated your iPad. Settings>General>Reset>Reset Home Screen Layout. -
Anybody know what the logs meant on the router?
Hi all,
Logs:
Warn: MRT_DEL_MFC; Errno(2): No such file or directory
Warn: The origin for route 239.255.255.250 changed from 192.168.2.1 to 192.168.169.1
Anybody know what these logs mean on the router?
Help will be greatly appreciated.
Thanks,
SFHi,The link below may help
http://developer.apple.com/students/sthardware.html
kindest,becca -
My ipad mini says that my stirage is full but i have dleted everything and its still the same, i cant download apps, or take photos and camera and photos seems to be taking up the most GB even though i have delted everything from my photos. Does anyone know what this is? thank you!
When you delete photo in 8.x it puts them in a deleted folder, it lets them in there for 30 days. You need to delete the photos / videos in the delete folder ( may have different name. )
Robert -
this morning i turned my music on and the volume wouldn't go down, and every time i tried to turn it down it just kept going back up. If i were to hold the volume slide down while playing the music it would make a sort of chopping sound in the music. I finally restarted it and it fixed it but i was wondering what the problem was.
Did you already try to reset the ipod by holding the sleep and home button until the Apple logo comes back again?
If this does not work, restore "as new device" without using the latest backup, in case it contains corrupt files.
How to back up your data and set up as a new device -
As mentioned above I have just downloaded OSX Maverick to my iMac. I am now having a lot of problems with iCloud. I get the message that "This iMac can't connect to iCloud because of a problem with, and then it goes on to quote my e-mail address. It then says to open iCloud preferences to fix this problem.
I do this and no matter what I seem to do this message continues to return.
Can anybody explain how to resolve this problem (please bear in mind that I am noy very computer literate).
Many thanks
MikeHello John
Sorry I haven't got back to you sooner.
Thanks very much for your help, your solution solved my problem.
Thanks again and kind regards
Mike
Maybe you are looking for
-
Hi, would you please shade some light on the FI-CA integration with MM? Is it necessary to use FM if such integration is required? Is it necessary at all to have such an integration if payments can be executed from FI-AP? Thank you in advance!
-
Controlling the preview order of objects.
hi all. im creating a dynamic menu which has submenus. when an item (jbutton) on the menu is clicked all of the items which are below are moved down and the submenu appears in that gap.. my problem is that the submenu buttons are previewed above the
-
I'm running 10.3 and I need to automate several tasks in off-peak hours. I'd like to run these tasks around 4am once/week. I've created a shell script that runs fsck, repairs permissions, updates prebindings, cleans some temp directories, and some ot
-
Sum of the column with the same name in diffrent tables.
Hi, Please let me know the query to find the sum of a particular column of various tables like A,B,C,D & E as an output if i enter a particular date. Eg. Tables A: Date aaa 1/1/2000 10 Tables B: Date aaa 1/1/2000 15 Tables C: Date aaa 1/1/2000 20 Tab
-
For preview feature in bcc, i have specified a HomePagePath.properties files which contains the following content $class=atg.service.preview.PreviewPath defaultPath=/crs/index.jsp But instead of this hard-coded url, i would like to add site url to th