I have a Mac mini OSX 10.4.11 Intel Core Duo, 512mb, 1.83 GHz with iTunes 9.0.3. What steps do I need to take to get my music library to my iPad. I dont think I meet the requirements to just upgrad to snow leopard and/or lion. I want the music I paid for
I have a Mac mini OS X 10.4.11, intel core duo processor (not core 2 duo), with 512 mb and 1.83 GHz processor. I only have version 9.0.3 of iTunes because it hasn't let me go higher, which I believe is because of the operating system. I want to get my purchased music from the Mac mini to a different computer (that has the latest version of iTunes) and also my iPad. The Mac mini does not meet the requirements listed to simply upgrade to snow leopard or lion. As far as I can tell. Forgive me if I am lacking here...this is new to me. What can I do to get the music transferred. I have invested alot of money over the past few years on all this music that I should be able to transfer. Thank you in advance if you can help me.
If you want to sync it to the iPad from that Mac, you need to upgrade it to at least 10.5.8.
If you want to copy the music to another Mac, you don't. Move the iTunes folder of the item in the Finder's sidebar over as you would any other folder. If you put it somewhere other than the Music folder, launch iTunes with the Option key held down and point it to that location.
(61713)
Similar Messages
-
HELP!! i have a ton of videos of my boys stored in iPhoto..They played fine on my old OSX system (leopard). However, I just upgraded to snow leopard and then to mountain lion and now i can't open my videos at all anymore. HELP!!
Can you tell us about one or more of the video files - what are they? QuickTime? MP4? Something else? How did you create the video files in the first place?
I do a lot of video and when I upgraded to Snow Leopard I discovered that many of the QT videos that I had created previously (via iMovie & Final Cut) would not play correctly in QuickTime X - the bizarre behavior was that QT X acted as if my video files were only audio files! I reported this to Apple at the time but never heard anything back, and there hasn't been any change in later updates to QT X.
The solution was to (re)install QuickTime 7. But first look in your Applications > Utilities folder. When you upgrade from Leopard to Snow Leopard, the installer normally moves the old QT 7 program to your Utilities folder. If it's there, try using QT 7 to play one of your video files. If QT 7 is not there, you can download and install it from here Make sure you are running at least OS X 10.6.3 before you install QT 7. It's even better if you make sure you are running 10.6.8 which was the last release of Snow Leopard. -
I have just upgraded to snow leopard and ical now wont open. says it is not compatible and is ical 3.0.2 which seems strange as i have a osx10.6.3 . have looked for update but cant find one, what do i do?
Greetings,
It sounds like you have moved iCal from it's normal location and are opening a second copy which is the older version.
The current version of OS X 10.6 is 10.6.8. As you are running 10.6.3 you need the updates. Go to the Apple Menu > Software update and keep doing this until it says all updates have been installed.
Click anywhere on your desktop (the background).
Go to the top of the computer screen and click on "Go" > "Applications"
In this list look for "iCal".
Double-click iCal in this location (which is the proper home for iCal) and see what version it says.
If it reports the correct version you can drag the iCal from the Applications folder to the dock on your screen to add an button for it (if you already have one in the dock, remove it before you drag this one there). Be sure to leave iCal in the Applications folder.
Hope that helps. -
HI, SO I BOUGHT MOUNTAIN LION ON MY MACBOOK PRO TRYING TO UPGRADE FROM SNOW LEOPARD, AND WHILE TRYING TO REINSTALL THE OS SETUP AS IT SHOWED IT COULDNT BE VERIFIED, I CROSSED OUT MOUNTAIN LION FROM MY PURCHASES, ITS NOW GONE, DO I HAVE TO BUY IT AGAIN?
Please google search for "Mountain Lion disk crash" before upgrading you mac pro. You might need to replace you Mac hard drive after the upgrade.So many people had the same problems including me.
Be aware of the Mountain Lion upgrade problem. -
I just upgraded to Snow Leopard, and I have Aperture 3.1.3. Now after I import pics from my camera I get a dialogue box so large that I can't see the eject card button. Consequently, I can't get rid of the dialogue box without having to do a force quit on Aperture. How do I fix?
I can drag the dialog box, but I can't move it up far enough to get to the eject card button. The dialogue box contains all the jpeg Numbers I am trying to upload. It has never done that before. It used to be just a smal dialogue box with no jpeg numbers in it.
It is even difficult to get to the Finder with the Dialague box is open. I have to force quit aperture.
Any ideas would be appreciated. -
I have just upgraded to snow leopard and lost my epson printer software. I have checked Epson Aus web site for printer software but they haven't upgraded it for snow leopard. Am i able to download software for a lesser operating system then snow leopard or do i have to purchase a new printer? The model is stylus photo R310.
Have you tried the R300 or R320 software? Typically the software covers a broad spectrum of printers, often providinbg overlap to cover "relatives" of a series.
http://www.epson.com/cgi-bin/Store/support/supDetail.jsp?BV_UseBVCookie=yes&oid= 47541&prodoid=47915738&infoType=Downloads&platform=Macintosh -
I have been making back ups on a Seagate Back up plus drive on a macbook pro running on Mountain lion. Sadly the mac was stolen and all I had was the seagate back up. I tried opening it on my old iMac running on snow leopard and after several visits to this forum managed to open it. The data was safe and sound. Now I have received a hand me down macbook pro which runs on osx 10.9.5. I'm assuming there is a compatability issue as the drive does not come on at all when I hook it up to the usb port. I checked the seagate drive once again on the imac and its light came on on that system. Then I suspected there may be a problem with this macbook pro usb port. But it seemed to work fine when i hooked my camera cord into it. Is it that I must reinstall mavericks. In which case how do I back up before reformatting or reinstalling. BTW I did the command+ R thingy and repaired my internal Hard disc which was showing errors. What do I do next, your help is most appreciated if you have had a similar problem.
Your 2010 MBP would be able to handle Yosemite, but I would strongly suggest that you get the current problem sorted out before trying to upgrade to Yosemite. I'd also recommend another backup that isn't created by Time Machine if you are thinking of upgrading. SuperDuper and CarbonCopyCloner can make bootable clones of hard drives. If you clone your existing system to a fresh external drive, you would be able to boot from that drive and recover quickly in the event that your Yosemite upgrade didn't work out. Time Machine backups are not 100% reliable.
It's possible that, if your internal HD is the one that shipped with your MBP in 2010, it may be failing. If it keeps needing repairs, that is probably a sign that it is approaching the end of its useful life.
Have you run Disk Utility's Repair tool on the external drive as well?
I mentioned the hub because some people have reported here that attaching their USB 3 drives through a USB 2 hub solved some disconnection problems. A good-quality powered USB 2 hub won't cost much.
My most recent brush with random disconnections involved a nice new OWC drive enclosure. I used the cable that came with the drive, but the drive kept disconnecting. Using a different cable solved the problem. You wouldn't expect that what appeared to be a high quality cable would be a problem straight out of the box, but it was. -
I have a macbook about 3 years old running leopard. I amwondering ifitwouldbeworth the trouble to install snowleopardand then lion ($60.00) or just buy a new macbook pro ($$$$$$). How does lion perform on an intel core 2 duo processor?
I have Lion installed on a Mini with a C2D processor. The same Mini has Snow Leopard on another partition and there is no noticeable difference in operational speed between the two OS's. But compared to my new MBPro 17" with a 2.83GHz i7, the Mini running Lion is noticeably slower. So if you can afford anew MBPro, then I would get it because you will probably be unhappy with the performance of Lion on the older MBPro. The other benefit of getting a new MBPro with Lion is that if you have any Power PC applications currently on the old MBPro, which will not operate in Lion, then you still have the ability to use them. Many users got stung by upgrading to Lion, only to find they could no longer use the older PPC applications.
-
I just upgraded to Snow Leopard and a new Imac. Could someone tell me where the preference is to change file to open in original program instead of preview?
Right-click on one of the files and choose 'get info'. in the info box. Change the 'open with' setting to your correct application. Check the 'always open with' option before OK-ing the change, then click the 'change all' button before closing the info window.
Typos edited by: noondaywitch -
Greetings:
I have just acquired an older mini mac (2006 1.66 ghz core 2 duo) Anyway, it had Tiger 10.4 on it and the Bluetooth worked for the wireless Apple keyboard and mouse. I upgraded to Snow Leopard and everything works fine - everything except Bluetooth.
The Bluetooth icon does not exist in the System Preferenc screen.
I tried to download Bluetooth from Apple site but the message I got told me that I didn't need it.
Under Finder, Utilities, I found Bluetooth File Exchange but the message I got was that I had to connect a Bluetooth device to my computer.
I have to admit that I have no idea what's going on here. I am hoping to avert the need to try another complete re-install of Snow Leopard.
Any ideas?
Thanks
javaminitPuzzled is a polite word for it.
Thanks Barry - I found the file and trie to send it to trash. The response: (This item cannot be trashed as it it owned by the system).
After dancing around with PRAM and SMC and turning on while holding the power-cntrl-option-shift and heavens knows what else, I now have the Bluetooth symbol on the top of the menu bar but it is ghoseted and has a squiggly line through it. This, I didn't have before so I read this as some progress. It notes that "Bluetooth is not available">
However, the Bluetooth icon is still missing from the System Preferences window - you know, between "network" and "sharing".
You note that you reckon the issue is not software based and you may be correct. The reason that I wonder about that though, is that before I installed Snow Leopard, the keyboard and mouse both paired with the box under the Tiger 10.4. That leads me to conclude that hardware is functional and that there is some screwy little bit of software that is not cooperating.
If I could delete Bluetooth from the system and re-install a fresh version, that might help. Or, is there a way I can use the Snow Leopard install disc and only load in Bluetooth?
I'm stumped.
Thanks for your time
/Bill C. -
I had an older version of Mac OS, I upgraded to Snow leopard and then OSx Lion, most of my software has been upgraded except for Imovie. Now I can't get my projects to upload or share to iDVD or iTunes. Also to compound the situation everytime I attempt to share to iDVD or iTunes, iMovie quits unexpectedly. What do I do?
If you want to sync it to the iPad from that Mac, you need to upgrade it to at least 10.5.8.
If you want to copy the music to another Mac, you don't. Move the iTunes folder of the item in the Finder's sidebar over as you would any other folder. If you put it somewhere other than the Music folder, launch iTunes with the Option key held down and point it to that location.
(61713) -
I have an i Mac with airport wireless.What steps do I need to take to change name on wireless??
I have an i Mac with airport wireless.What steps do I need to take to change name of wireless(airport)???
You should use Airport Utility, in your Utilities folder (or you can search for it in Spotlight, the magnifying glass in the top right of your screen) to administer the Airport. There, you can change the wireless network settings, including the network name.
Matt -
I have mac os 10.5.8 and want to install icloud. do i need to buy snow leopard and then lion?
can i install icloud from 10.5.8 or do i need to upgrade first to snow leopard and then lion?
hi stacy
i have also 10.5.8. but no problem with installing icloud on powerbook g4
works fine on my iphone G4 s
regards Arno -
Hello, I just bought a Snow Leopard and I have tried to install this on my macbook pro 2008 (10.5.8) and I can not do it. I have to erase the hard drive before in order to succeed. Please tell me step by step what to do. I appreciate very much your help.
ThanksHere are the directions:
http://support.apple.com/kb/HT3910?viewlocale=en_US
Ciao. -
After a long time, I have just upgraded to Snow Leopard. My computer is seemingly running so much faster, could this be because of the upgrade? The reason it took me so long in the first place is I could not find the location to delete all the used memory. I happened to luck upon a place just the other day that said "all media". From there I was able to go through and get rid of approximately 15GB worth of memory. My computer has been saving multiple copies of all my images. I do not know how to make this stop happening. Has anyone had this experience?
10.6 is faster than 10.5 because of updated video drivers, however the machine will slow down if you upgrade OS X past 10.6.8 as 10.7 and 10.8 are more hardware demanding operating system verisons.
Also 10.7 and 10.8 will not run your PPC based software or older Intel software, requiring all new purchases.
From there I was able to go through and get rid of approximately 15GB worth of memory
What you did was free up 15GB of storage space on your boot drive which if a boot hard drive is getting near full will slow down the comptuers performance. Ideally it's best to stay under 50% filled, but never more than about 80%.
Your "memory" actually refers to the RAM which the processor uses as temporary storage space while it works on things.
Why is my computer slow?
My computer has been saving multiple copies of all my images. I do not know how to make this stop happening. Has anyone had this experience?
Sometimes the duplicates are actually thumbnails, or tiny versions for rapid display in programs like iPhoto with the smaller images to preview before you click the larger version, so they will always be recreated.
Hopefully you didn't delete the original larger files by accident.
The "All Images" is particularly dangerous if not used wisely.
Also it might have been you forget and duplicated the images at one time or another.
https://discussions.apple.com/community/notebooks/macbook_pro?view=documents
Maybe you are looking for
-
Hello. In Dreamweaver CS 4 "Design" View have some errors. In screenshots orange squere - Firefox; green squere - Dreamweaver First screenshoot: Backround color: none Backround image repeat-x Problem: Below backround image there is light braun. In F
-
How can I be able to upload my imovie to facebook?
I update my iPhone to IOS 6.0.1 but still can't upload to facebook I even try to export to camera roll then upload to facebook also can't upload,can anyone help me on this?
-
I am beginner to 3d programming..... i have done few example on 3d programming...... In those examples we have used applet and to execute it as frame we have used createFrame() method... now i want to do my 3d programe on my custom class which extend
-
Can we use this type of email? please help... dave....
-
i have an symbian cellphone with the eprint app but it seems that it can't find the documents, this message shows up "no files" where should i put them? Please, please help me, thks