I have a mac mini updated to 10.7.4 and can no longer read .rw2 raw files. Can anyone help?
I have just updated to Lion to to 10.7.4 and can no longer read *.rw2 raw files, before this, at 10.7.3 it works perfectly!
see > 10.7.4 lost RAW format: Apple Support Communities
plus others just to your right in "More Like This"
Similar Messages
-
i have a mac mini (without sd/sdhc card slot) and a sony cx160e camcorder and i want to import 50p video files, but i don't want to convert my video's. How can i import my video's?
Connect the camera to the computer with a USB cable and use the camera as the card reader. Make sure the camera is in playback mode.
-
Hello I have a Mac Mini with OS 10.7.5 And I have a problem that the mouse does not do a right mouse ... I have the mouse model a1197 What should I do? Thank you
Why is there no iDVD on my new Mac? How do I get it and how do I install it?
https://discussions.apple.com/docs/DOC-3673 -
I am using iPhoto '11 version 9.4.2 on Mac OS X. I have a Leica D-LUX 6 and cannot get iPhoto to read my RAW files. Please help.
Answered here:
https://discussions.apple.com/message/20493786#20493786 -
I just downloaded a new version of OS7 to my iphone and when I try to sync with my mac book pro it will not finish and just spins around at the last step. anyone help?
It was telling you that you needed Mac OS 10.6.8 or later, not itunes 10.6.8
Syncing with iTunes on a Mac or PC requires:
Mac: OS X v10.6.8 or later"
http://www.apple.com/iphone/specs.html -
I am trying to include a Mac Mini with a webcam/microphone to call several family iPhones 4S/5 usisng email addresses vice phone numbers so that we can communicate from outside the US via iPhone to the US (Mac Mini) via wi-fi and email addresses. We are using the same email address for the Mac Mini as for Itunes and made new email addresses for each of the iPhones. I cannot receive calls from the iPhones but can call the iPhones from the Mac Mini. what needs to be corrected?
Thanks.
SteveHi Steve,
Thanks for visiting Apple Support Communities.
You may find some useful suggestions in these articles:
FaceTime for Mac: Troubleshooting FaceTime
http://support.apple.com/kb/ts4185
iOS: Troubleshooting FaceTime
http://support.apple.com/kb/ts3367
Have a great day!
Jeremy -
The onjly thing I can think of is dual boot one client machine in to OSX10.6, but is there a anther work around?
dmason wrote:
I had this problem as well. I was under the gun on time and just purchased it anyway. After installation I contacted support and they refunded me the amount.
You should have a backup of your servers regardless of circumstances. You would then be able to restore the server software.
When Apple repair machines they will often just swap it or swap the hard disk and will not make any effort to transfer your files. They assume you are doing a backup. Anybody running servers absolutely has a responsibility to ensure they have aduequate backups even more than 'normal' users. While Time Machine may not be wholely suitable for backing up servers Time Machine is so simple even normal users can use it and therefore no longer have any excuse for not doing backups. -
Cannot download updates, and I can no longer work with RAW files without them. Help!
I used to be able to get Bridge to read RAW files, but I cannot any longer. I think I need an updated plug-in, but when I try to go to help-updates and download them, the message I get for all three (Adobe Bridge CS5 4.0.5 update, Photoshop 12.0.4 update for Photoshop CS5, and Photoshop Camera Raw 6.7 Update) is this: "There was an error downloading this update. Please quit and try again later." I have tried shutting down and restarting the computer a few times over the course of several days, and have even tried updating my mac software. I always get the same message. Please help! Thank you!!
Ok, Adobe. I'm having a huge problem with your customer service here. You list no email or phone to contact you, yet I have spent hundreds of dollars on a product I can't use unless I can get an answer to this question, which appears to be a problem with your system. I've used the forum, which is the only option you list for contacting you, and have heard no response. Can anyone please help me?
-
I have a mac mini with both the 256 SSD and a 750 GB drive.
My SSD is almost full and the 750 not used at all. I would like to put my data files on the 750 and free up the SSD for OS and critical programs. How do I do this? Qualifier: I bought it last week and have not used many Apple products in the past 15 years. I have not a lot of experience to draw on. thank you for your help.
My SSD is almost full and the 750 not used at all. I would like to put my data files on the 750 and free up the SSD for OS and critical programs. How do I do this? Qualifier: I bought it last week and have not used many Apple products in the past 15 years. I have not a lot of experience to draw on. thank you for your help.
-
After latest Photoshop CC update, I can no longer edit a raw file in Lightroom 4 as a smart object
I updated PS this morning, since then I am no longer able to edit a file in LIghtroom 4 as a smart object in Photoshop CC. Photoshop will open, but after some time passes, Lightroom 4 gives an error that Photoshop cannot be launched. If I choose "edit in photoshop" from lightroom, instead of "edit as smart object", the file opens fine.
Thanks for your time!
Windows 7 Pro
Photoshop CC
Lightroom 4.4I updated PS this morning, since then I am no longer able to edit a file in LIghtroom 4 as a smart object in Photoshop CC. Photoshop will open, but after some time passes, Lightroom 4 gives an error that Photoshop cannot be launched. If I choose "edit in photoshop" from lightroom, instead of "edit as smart object", the file opens fine.
Thanks for your time!
Windows 7 Pro
Photoshop CC
Lightroom 4.4 -
recently updated firefox, per suggestion. now, on computer with update, can no longer read word/pdf attachments. can still do so with adobe 5 on old computer. what happened? what do i have to do?
== This happened ==
Every time Firefox openedExtensions that may '''interfere with Back Button''', and these are already listed in [http://kb.mozillazine.org/Problematic_extensions Problematic extensions] for other reasons
*McAfee Site Advisor see [https://support.mozilla.com/questions/805964 805964] (update perhaps 3rd week July 2011)
*Yahoo Toolbar (https://support.mozilla.com/questions/845691)
Back/Forward Home don't work in 7.0.1 due to '''network.http.max-connection'''s being upped to 256, reduce back down to 32.
*https://support.mozilla.com/questions/889087
Back/Forward: navigation/buttons are disabled (repair with an extension)
*http://kb.mozillazine.org/Locked_or_damaged_places.sqlite -
Here's the deal. Currently running SL 10.6.8 on a MAC Mini. Planning for eventual upgrade to ML. Have a 1TB external hard drive partitioned into two volumes, one volume for Time Machine and one volume for SL which I periodically update using Superduper. Thus I always have a point-in-time bootable backup on the external hard drive.
The MAC Mini supports Firewire 800. However, booting from my current external hard disk is pretty slow, since it only supports Firewire 400. I am considering buying an Iomega MiniMax which supports Firewire 800. Then, I would use the MiniMax as my bootable backup volume, and relegate the older hard drive to Time Machine.
So, question #1 is, can I daisychain the new MiniMax between the MAC Mini and my existing external hard drive? My expectation is that the new Mini Max would run using Firewire 800 and that the existing hard drive would run at Firewire 400 speed as it does today. If it doesn't (e.g., daisychaining in the Firewire 400 external disk with the MiniMax Firewire 800 external disk ends up running the whole leg at 400), my resolution will be to run the existing hard disk off an available USB port and have just the MiniMax running at Firewire 800.
Why am I going to all this trouble? That's question #2. I don't trust upgrades; they always break something. When I upgraded from 10.5.x to 10.6.x, the web directories got renamed, and all of my web apps 403'd until I figured out what happened. Plus, I have accounts for other family members, and in order to ensure their ability to use the computer during my upgrade process, I need to have the ability to fall-back quickly to a known-stable version of OSX. So what I'm trying to do is insulate myself from problems by partitioning the MiniMax into two volumes, taking a Superduper image of my current installation on the Mac Mini to MiniMax external drive volume 1, then upgrading to ML on the MAC Mini, and take a SuperDuper image of that to MiniMax external drive volume 2. Then, if the upgrade results in problems I can't resolve immediately, I can simply reimage the MAC Mini from MiniMax volume 1. BUT ...
... I've read that the ML installation creates a "service and support" partition that is different than the startup disk. I'm concerned that I won't be able to reimage the hard disk in the MAC Mini once I upgrade it to ML because of the partitioning changes it introduces on the startup disk. Theoretically, I +should+ be able to use the disk utility on my SL system to repartition the disk in the MAC Mini prior to reimaging it from my backup, but I'm considering the possibility that the new partition may be of a type that the SL disk utility cannot identify, and might therefore be unable to delete or even detect. So I'm hoping someone else has been down this road and can advise me. Even at Firewire 800 speeds, booting from an external disk is still going to be slow, so I want to be able to restore my SL image to the MAC Mini hard disk.
A little background on me. I work for a major disaster recovery provider. I used to have a Mac PRO G5, which I got used, and the first thing I did with it was install a second hard disk, SuperDupe an image from the first disk to the second, and made sure I could boot from the second. THEN I started using and customizing the MAC. I really feel vulnerable with the MAC Mini, since it only has the single internal hard drive - sort of like going out in public dressed only in a long T-shirt. So my whole thing is, I ABSOLUTELY MUST BE ABLE TO PUT THINGS BACK THE WAY THEY WERE before I do the migration to ML.
Obsessive-cumpulsive? Yep. Anal? You got it. That's why I'm in the DR business.You may have overloaded the port, following the instructions below it should reset:
+1. Shut down the computer.+
+2. Disconnect all devices and all other cables, except the keyboard and mouse cable(s).+
+3. Disconnect the computer from the power outlet and wait for 3 to 5 minutes.+
+4. Plug the computer back in and turn it on.+
+5. Reconnect the device(s) (one at a time if there is more than one) and test. Test with each port if you have more than one.+
http://support.apple.com/kb/HT1317?viewlocale=en_US -
The programs open tab ( list of programs open on comp) is always popping up on middle of screen whenever I go near the mouse. HELP!!! Have turned it off recently and moved it, a mac mini, now on new plug in and set up it now does it.
Yes I have turned it off and restarted it, ubnplugged mouse and plugged it back in.
Have not updated it in a little bit
running mavericks, which I dislike.10.9.1
This is a new problem,
Why where and what do I need to do to fix it? Please.
Thanks for your help community, You guys are awesome, better than the guys n girls at Apple!!
I have also noticed the drop down menu arrow on Numbers Tabs has dissappeared since move.
you know the invisible arrow that appears in the additional tabs pages in "Numbers program"
Especially an inconvenient for previous Numbers users as you all know.
any word on New Numbers Tutes at all??
You'd think with a Billion dollars they could make a 10 min clip saying here are changes guys, go enjoy new layout..... Just saying... not.
anyway Hi and any help out there tonight is GREATLY APPRECIATED.
Cheers Jason.If the reset doesn't work:
FORCE IPAD INTO RECOVERY MODE
1. Turn off iPad
2. Turn on computer and launch iTune (make sure you have the latest version of iTune)
3. Plug USB cable into computer's USB port
4. Hold Home button down and plug the other end of cable into docking port. Do not release button until you see picture of iTune and plug (very important)
5. Release Home button.
ON COMPUTER
6. iTune has detected iPad in recovery mode. You must restore this iPad before it can be used with iTune.
7. Select "Restore iPad"...
Note: Data will be lost -
Hi All
I have put mac os update from 10.9 to 10.9.5 from mac app store. Update wants restart and I do that. First it shows installing updates on monitor and then after waiting for more than 30 minutes, it did not restart. On monitor it shows no signal now. I have checked all the connections. Mac mini LED light is showing blue color and i think its signalled the ON mode. Also mouse lights are on. Please provide help, as I need to solve it asap.
ThanksBoot to recovery and first try repairing the startup disk via dis utility.
Next reinstall the OS via Recovery
OS X: About OS X Recovery -
Mac Mini update AppleID is incorrect, can i change it to mine, not my wife's?
I have a Mac Mini and every time I update apps and install etc. it asks for my wife's AppleID to install the updates. I set myself up as the first and master account, how can I rectify, this is seriously frustrating.
Try Settings>Store>Apple ID:>Sign Out> then sign back in with your correct ID
Maybe you are looking for
-
Hi I am using t-code F-44 to clear open item in a vendor. When I see open items in the vendor using t-code FBL1N, there are 156 open items. But when i go to t-code F-44 to clear the open items only 64 items are visible. I am able to figure out why th
-
Multi tier debugging VS2008 - ODAC 1110620
Hi, I'm trying to get the multi-tier debugging working in the above environment and am hitting the 'ORA-30683: failure establishing connection to debugger' exception. I can debug by right click on the server explorer and doing step-into. I have Tools
-
[solved] No DJ controller found on Mixx, still 100% compatible
Hello! I've bought this Reloop Digital Jockey IE 2 for usinig it as an audio and controller device in conjunction with Mixxx. Tried on my parent's Ubuntu desktop everything works out of the box, but on my arch notebook setup only the sound card is wo
-
HI THERE PLEASE SOMEONE KNOWS HOW A BLOCKED CD IN MINIMAC CD DRIVER CAN BE EJECTED? BECAUSE FINDER COUDN'T EJECT THE CD, HOW SHOLD I OPERATE TO EJECT THE CD WITHOUT DAMAGING THE MINIMAC? THANKS
-
Hi All, I am working with one application that have two Jtree Visivle. There tree are visible in left and right side of a frame. Using panels I have put SplitPanes in these . Now my problem is to draw a line from left tree node to a right tree node.