I have a Mac OS X Snow Leopard 10.66. Can I download Candy Crush Saga onto my Mac?
I have a Mac OS X Snow Leopard 10.66. Can I download Candy Crush onto my Mac?
You can use the Facebook version that runs on Adobe Flash. I would upgrade to the free update of Mac OS X 10.6.8 to get the latest Adobe Flash from http://www.adobe.com/
According to Wikipedia there is no version independent of Facebook or phone operating systems as of yet. If you can find one, that would be something you might want to contribute to:
http://en.wikipedia.org/wiki/Candy_Crush_Saga
10.6.8 is found here:
http://support.apple.com/kb/DL1399
Note, upgrading to 10.7 or later is not recommended, until you have read this tip:
https://discussions.apple.com/docs/DOC-6271
Similar Messages
-
I have a MacBook Pro with Snow leopard (10.6.8). Downloaded Lion from Aplle store and got a bill but no upgrade. Bad hearing can't use telephone to support. Apple store can't help. CASE NUMBER: 19*****63.
I am hard or hearing and can't use the telepohne support and live on an island and can't get to a shot to buy the Lion.
<Case Number Edited by Host>Try d/ling again. In the App Store, option-click the tab
-
How do i updgrade from 10.5 to Snow Leopard so I can they download Lion from the Mac App store?
I have an i mac operating on 10.5.8. I want to iupgrade to Lion but I need to have snow leopard. How do i do this?
You cannot download it. You must buy the disk.
http://store.apple.com/us/product/MC573Z/A?fnode=MTY1NDAzOA&mco=MTc1ODgwMjE -
I have a MacBook Air. I also have a 250GB NTFS external drive which the Mac sees. i can copy and paste from the external drive to the Mac but not from the Mac to the external drive. However, I can go in both directions with a Fat32 16 GB flashdrive. Can anyone explain this to me?
I've always recommented ext3 filesystem if you wanna use an external drive for both Windows and Mac OS as both can read and write to that filesystem.
But obviously you'd have to format the drive (you can use Mac disk utility) -
I have a Mac Pro with four hard drives. I currently have Lion installed on one hard drive. I want to have the option to boot from either Lion or Snow Leopard. How can I do this?
It's best to install Snow Leopard on one of the three remain drives without an Operating System.
You can then install the applications you need from the original media. Create a User Account using Setup Assistant.
Do you want to migrate User Accounts from the OSX LIon boot drive, or are you keeping the User Accounts separate?
Dual-booting just requires holding the option key during startup and selecting either Lion or Snow Leopard. -
I have 3 macs. 2 are Lion, but 1 I left Snow leopard so I can access data from my old Quicken Application that doesn't work with Lion. If I move to iCloud, will I no longer be able to access my MobileMe email on the Snow Leopard mac?
What version of word do you have? The TS3938 sounds like it's a PowerPC app- written for an old architecture that is no longer supported in Lion. If this is the case, your files are fine- you just need a newer version of word that will run in Lion in order to open them. The newest version (2011) should be readily available anywhere, and has worked fine for me ever since I switched to Lion on release day....
-
I had Leopard on may Mac. I upgraded to Mountain Lion using Snow Leopard. I can't use my video with Mountain Lion. Can I load Snow Leopard on an external hard drive so I can use it with my camera?
First, you cannot do this if you have a Boot Camp partition.
Second: Create a new partition.
1. Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
After the main menu appears select Disk Utility and click on the Continue button. Select the hard drive's main entry then click on the Partition tab in the DU main window.
2. You should see the graphical sizing window showing the existing partitions. A portion may appear as a blue rectangle representing the used space on a partition.
3. In the lower right corner of the sizing rectangle for each partition is a resizing gadget. Select it with the mouse and move the bottom of the rectangle upwards until you have reduced the existing partition enough to create the desired new volume's size. The space below the resized partition will appear gray. Click on the Apply button and wait until the process has completed. (Note: You can only make a partition smaller in order to create new free space.)
4. Click on the [+] button below the sizing window to add a new partition in the gray space you freed up. Give the new volume a name, if you wish, then click on the Apply button. Wait until the process has completed.
You should now have a new volume on the drive.
It would be wise to have a backup of your current system as resizing is not necessarily free of risk for data loss. Your drive must have sufficient contiguous free space for this process to work.
Third: Install Snow Leopard.
Boot from your Snow Leopard DVD. Follow instructions for installation being sure that before you actually install Snow Leopard you have selected the new partition as your target destination.
Booting From An OS X Installer Disc
1. Insert OS X Installer Disc into the optical drive.
2. Restart the computer.
3. Immediately after the chime press and hold down the "C" key.
4. Release the key when the spinning gear below the dark gray Apple logo
appears.
5. Wait for installer to finish loading. -
I have a 27inch iMac with snow leopard and 1 user, and a 24 inch (older) upgraded to yosemite and 5 users. I want to wipe the 27 inch and transfer everything on the 24 to it. I do have time capsule 3tb but not sure how to do it
Move your content to a new Mac - Apple Support
-
I have a MacBook pro on snow leopard - do I need to get lion prior to changing to iCloud ?
I have a MacBook pro on snow leopard - do I need to get lion prior to changing to iCloud ?
You can migrate to iCloud whilst still using snow leopard, but you will not be able to sync your calendars and contacts on your Mac.
If you are asking whether you should get Lion before or after migrating to iCloud, it really doesn't matter, but I think I would prefer to get it before migrating to iCloud . -
I have a macbook os x snow leopard, but by accident I managed to Loaded os x lion. Is it possible to undo?
I got the Mac in August 2010 and is 10.7software original.
Thank you in advance!Check out this previous message thread.
-
I seem to have lost fax capability with Snow Leopard.
Does not appear in Print as before. Cant find fax in System Preferences. No drivers for fax found.
Initially said it was downloading software but no longer does this. Fax test works on HP site.
Using HPC410aHP Photosmart Premium
Any help would be appreciated.
Bob Wines.Thanks for your detailled description of the faxmodem installation!
I've tried this with Mac OS X v10.8 Mountain Lion and it works fine.
I've to type "cupsctl WebInterface=yes" in terminal to see the interface.
Does anybody know, if send faxes are saved somewhere? -
i have a 2008 imac with snow leopard. i installed update 10.9.3 not realizing it's best for Maverick's users. Now my Itunes 11.2.2 won't burn playlists to CD. Anyone else with this problem? CAn I uninstall the 10.9.3 update? Also my HP scannerwill not save the displayed scanned document since this update! it just saves gray.
If you have your old system backed up then erase the drive and restore your backup. If you don't have a backup then backup your entire Home folder. Erase the drive and install Snow Leopard after which you can restore your Home folder from the backup.
Clean Install of Snow Leopard
Be sure to make a backup first because the following procedure will erase
the drive and everything on it.
1. Boot the computer using the Snow Leopard Installer Disc or the Disc 1 that came
with your computer. Insert the disc into the optical drive and restart the computer.
After the chime press and hold down the "C" key. Release the key when you see
a small spinning gear appear below the dark gray Apple logo.
2. After the installer loads select your language and click on the Continue
button. When the menu bar appears select Disk Utility from the Utilities menu.
After DU loads select the hard drive entry from the left side list (mfgr.'s ID and drive
size.) Click on the Partition tab in the DU main window. Set the number of
partitions to one (1) from the Partitions drop down menu, click on Options button
and select GUID, click on OK, then set the format type to MacOS Extended
(Journaled, if supported), then click on the Apply button.
3. When the formatting has completed quit DU and return to the installer. Proceed
with the OS X installation and follow the directions included with the installer.
4. When the installation has completed your computer will Restart into the Setup
Assistant. Be sure you configure your initial admin account with the exact same
username and password that you used on your old drive. After you finish Setup
Assistant will complete the installation after which you will be running a fresh
install of OS X. You can now begin the update process by opening Software
Update and installing all recommended updates to bring your installation current.
Download and install Mac OS X 10.6.8 Update Combo v1.1.
Or you can:
Try these in order testing your system after each to see if it's back to normal:
1. a. Resetting your Mac's PRAM and NVRAM
b. Intel-based Macs: Resetting the System Management Controller (SMC)
2. Restart the computer in Safe Mode, then restart again, normally. If this doesn't help, then:
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the
COMMAND and R keys until the Utilities menu screen appears. Alternatively, restart the
computer and after the chime press and hold down the OPTION key until the boot manager
screen appears. Select the Recovery HD and click on the downward pointing arrow button.
3. Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the Utilities menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu. Select Restart from the Apple menu.
Reinstall the 10.9.3 update: OS X Mavericks 10.9.3 Update (Combo).
4. Reinstall Lion/Mountain Lion, Mavericks: Reboot from the Recovery HD. Select Reinstall Lion/Mountain Lion, Mavericks from the Utilities menu, and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
Reinstall the 10.9.3 update: OS X Mavericks 10.9.3 Update (Combo). -
I need to upgrade my desktop which is running version 10.5.8. Do I have to install snow leopard first or can I go directly to mountain lion?
robertnb1985 wrote:
you can just go to apple.com/store and get it from there but the apple stores no longer have it, you might be able to buy it at bestbuy
Not necessary. The Apple web store has Snow Leopard disks at a very attractive price:
http://store.apple.com/us/product/MC573/mac-os-x-106-snow-leopard -
I have an iMac running OS X Leopard 10.5.8, I want to upgrade to OS X Lion, do I have to first update to Snow Leopard? And is it worth upgrading to Lion or should I wait some time?
Thanks for your time!
-JXYes you must first update to Snow Leopard if you plan on installing Lion. Apple is very clear about that in the Lion's Tech Spec's that say:
General requirements
Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7, or Xeon processor
2GB of memory
OS X v10.6.6 or later (v10.6.8 recommended)
7GB of available space
Some features require an Apple ID; terms apply.
I like Lion quite a bit and have been using it for several months now. I've found it pretty stable, of course I don't use all of it's features however I really like the additional swipe features however you need a Magic TrackPad to take full advantage of those. However other features like Launchpad I don't have any really appreciation for because I've used OS X for several years now. However if someone is considering their first Mac after using an iPhone, iPad or other IOS device they would appreciate Launchpad. -
I am using a Mac Leopard and want to know if I upgrade to Snow Leopard (so I can use the new Lightroom 4) will any of my programs be affected. I will not be able to restore some software and want to know if I'll lose those programs with the upgrade?
Hello,
Snow Leopard/10.6.x Requirements...
General requirements
* Mac computer with an Intel processor
* 1GB of memory (I say 4GB at least)
* 5GB of available disk space (I say 30GB at least)
* DVD drive for installation
* Some features require a compatible Internet service provider; fees may apply.
* Some features require Apple’s MobileMe service; fees and terms apply.
Which apps work with Mac OS X 10.6?...
http://snowleopard.wikidot.com/
It looks like they do still have it:
http://store.apple.com/us/product/MC573Z/A?fnode=MTY1NDAzOA
And it's been reported that if you have a MobileMe account Apple will send one free.
If it's a core Duo & not a Core2Duo, then it'll only run in 32 bit mode.
Maybe you are looking for
-
Sender Mail Adapter Attachment
Hi All The mail I get from the 3rd party has a body and attachment. I have done the TRANSORM module as described in some of the forums, and then the Plain2XML. On sxmb_moni I see the MailMessage and MailAttachment-1, where the MailMessage is in XML f
-
How can I automatically open Mail.app message attachments after downloading
The subject says it all, I think. My wish #1 Automatically Opening Mail.app message attachments after downloading My Wish #2 At least having the Finder automatically default to the folder I just downloaded to after completing the download. Is this an
-
Hi all!! well, my problem is that i can't connect or syncronize my nokia n73 with isync and neither with bluetooth settings. My mac recognize my n73 but can't create a connection.... My version of isync is 3.0.2 (574.0), if someone has any idea... th
-
I have always been able to remote access to my office email through VPN access. Now when I try to, a Java preference box pops up and there seems to be no way to get past it. Before, java would just load. Now it won't. I had my operating system upgrad
-
Flash Lite 3 on Linux Embedded Device
Hi All, I can't seem to get a definitive answer on Linux support. I am building a small hand held device for home controls automation, it will have a 3.5" touch screen display and be using embedded Linux as the OS. I want to use Flash Lite 3 as the U