I have a mac os x snow leopard. my problem is that when i go to the ethernet settings it shows 'not connected'. i called the internet person even he couldn't fix it PLEASE HELP!!!!!!!!!!!!!!

i have a mac os x snow leopard. my problem is that when i go to the ethernet settings it shows 'not connected'. i called the internet person even he couldn't fix it PLEASE HELP!!!!!!!!!!!!!!

System Preferences > Network > Ethernet? If that shows "not connected" that is all your Mac knows. As far as it is concerned there is no cable connected to the port on your Mac, or the other end of the cable is either disconnected or connected to something that is broken.
Try another cable. If the cable is broken you will also get that status message. If you have exhausted all of these possibilities, the only remaining cause is an inoperative port on your Mac.

Similar Messages

I HAVE A MAC OS X SNOW LEOPARD OPERATING SYSTEM. MY SAFARI IS VERSION 5.1.10 (6534.59.10). I KEEP GETTING A"BLOCKED PLUG-IN" HOW DO I FIX THIS?

I HAVE A MAC OS X SNOW LEOPARD OPERATING SYSTEM WITH A SAFARI VERSION 5.1.10. I KEEP GETTING "BLOCKED PLUG-IN" HOW DO I FIX THIS?

Please use the offline installer:
http://fpdownload.macromedia.com/pub/flashplayer/latest/help/install_flash_player_osx.dmg

I have a Mac OS X Snow Leopard version and my fan keeps coming on. I have been away for a week so it has not been used and yet when I started it up the fan started straight away. Is there anything I can do? Please help! Thanks

I have a Mac OS X Snow Leopard version and my fan keeps coming on. I have been away for a week so it has not been used and yet when I started it up the fan started straight away. Is there anything I can do? Please help! Thanks

Yes, look in Activity Monitor (Applications /Utilities /Activity Monitor.app) and see what it eating up all the %CPU. If anything is over 40%, post the name here to get advice or just kill it straight away with the red 'Quit' button.
If nothing is using up CPU resources, but the fans are going full blast, do an SMC reset. Read the instructions here:
http://support.apple.com/kb/HT3964

I have a Mac OS X Snow Leopard. For some unknown reason the Library application in Finder disappeared and I was using it only two days ago. Please could someone help? Thanks.

I have a Mac OS X Snow Leopard. For some unknown reason the Library application in Finder disappeared and I was using it only two days ago. Please could someone help? Thanks.

Hi cb-anc! Thank you for replying to my question. The Library application has disappeared,not the library folder. I went into the application a couple of days ago to trash some plist files and now the application has disappeared. I haven't upgraded to Lion but am still on now Leopard.

I have a Mac OS X Snow Leopard 10.66. Can I download Candy Crush Saga onto my Mac?

I have a Mac OS X Snow Leopard 10.66. Can I download Candy Crush onto my Mac?

You can use the Facebook version that runs on Adobe Flash. I would upgrade to the free update of Mac OS X 10.6.8 to get the latest Adobe Flash from http://www.adobe.com/
According to Wikipedia there is no version independent of Facebook or phone operating systems as of yet. If you can find one, that would be something you might want to contribute to:
http://en.wikipedia.org/wiki/Candy_Crush_Saga
10.6.8 is found here:
http://support.apple.com/kb/DL1399
Note, upgrading to 10.7 or later is not recommended, until you have read this tip:
https://discussions.apple.com/docs/DOC-6271

My external speakers have stopped working. A circle with a line through it shows up when I try to adjust the volume. I have been in system prefrences to check all the sound settings and everything is set properly. What do I need to do to fix this. Help!

My external speakers have stopped working. A circle with a line through it shows up when I try to adjust the volume. I have been in system prefrences to check all the sound settings and everything is set properly. What do I need to do to fix this. Help!

Though I have doubts for success, you might try a SMC reset. It can do no harm. Otherwise, barring suggestions from others, the Apple Store or qualified repair facility is the last option.
http://support.apple.com/kb/HT3964
Ciao.

TS3221 my iphone 4s is not connecting with itunes and giving me a message of unknow error 0xE8000012 Please help me out

my iphone 4s is not connecting with itunes and giving me a message of unknow error 0xE8000012 Please help me out

You've managed to permanently damage the phone. As gdgmacguy suggests, buy a new one. Preferably from a legitimate source.
You may also want to keep in mind that it is illegal to use the Gevey SIM in pretty much every country on the planet. It may still be legal on the continent of antarctica, but that's only because penguins don't use cell phones as a rule.

I have a pop up saying new software for Iphone available;however when I try to downlaol it says"you are not connected to the internet"

I have a pop up saying new software for Iphone available;however when I try to downlaod it says"you are not connected to the internet"
I am connected so I ran diagnostics which verifies my Network Interface but Internet Connection Failed as did secure link to Itunes store.
In addition whenever I go into Itunes after a few seconds my AOL home page keeps popping up.
As you see my ISP is AOL and my connection is through a Netgear wifi router.
Please advise appropriate action
Mike Hillyard

This forum is for questions from those managing sites on iTunes U, Apple's service for colleges and universities to post educational material in the iTunes Store. You'll be most likely to get help with this issue if you ask in the general iTunes for Windows forums.
Regards.

Mac mini and Snow leopard wireless problems

Hi,
I got mac mini running snow leopard to our office from another branch, this is recently brought mac mini with snow leopard installed,
But the problem is I cannot connect to internet using wireless connections. Reading other posts i found out that there is a snow leopard issues with connecting to wireless network, but this problem seems to unique. When i connect to wireless network it shows me that, mac mini is connected to wireless network but doesn't take ip address from dhcp , its show some self assigned ip which is 169.254.226.163, but my network address are 192.168.1.*, ethernet works fines,but in wireless even when i gave manual ip , it connect but i cannot connect to internet neither i can ping to router.
I tried various methods suggests in forms, like deleting network preference files in /Library/Preferences and ~/Library/Preferences and also deleting network connection and adding new one, even updating to 10.6.3 but nothing works for me,
My macbook nicely connected to wireless and get ip, even PC connect nicely this issue is only with Mac mini
Could have suggest me how can i fixed this, Thank you very much,
Best Regards,
Waruna.
Message was edited by: warunacds

Thanks DaddyPaycheck for your initial response. Before I jump onto the phone with Comcast couple of questions that I have for clarification purposes:
1) Are you implying that I must link my blabla.com address to that static IP address through my Domain Provider? See following example:
Record Type Record Host Record Answer TTL
A *.blablat.com >>Static IP<< 300
2) The current IP I have been given 60.172.151.254, why is that not static or how do you know it is not static?
3) When executing the command host in terminal for this IP address it returns the following: c-60-172-151-254.hsdl.co.comcast.net which coincidentally is the same as primary DNS it recommended during the initial configuration of the Mini Server. What does this mean? When I enter this in Safari it results in 'Safari can't connect to server'.
4) Executing the same command for my domain name 'blabla.com' it results in my 'internal' IP address '1.0.10.9'.
Thanks in advance for any clarification you can provide,
Tiest.

I have a Mac Pro with Snow Leopard and FCP7 installed I would like to run FCP7 and FCPX on the same computer, is this OK

I have a Mac Pro (early 2009) with Mac OS X version 10.6.8, I use this for video editing with FCP7. I would also like to install FCPX, my operating system is Snow Leopard. Is this OK or do I need to up-grade my operating system. I want to be able to use FCP7 and FCPX on the same Computer. Your advise will be appreciated.

You will see from the hardware spec that the latest version of FCP X requires Mavericks.
The Mavericks spec shows you can upgrade to Mavericks on your Mac Pro.
Ensure you have a bucket full of RAM installed.
Final Cut Pro X spec
Mavericks hardware spec

I have a mac book with snow leopard. Can I upgrade to the lion os

I have a mac book ( couple years old) and would like to know if I am able to install the lion OS from the app store?

We would need more details regarding your MacBook. But it has to be minimum Core2Duo processor and 2GB of RAM. If you go to the Apple Menu select About this Mac for the info.

Internet is not working on cellular data after updating 8.0.2 in iphone 5s , wifi connectivity is fine , but no internet connection error message is start blinking even after cellular data is on , please help .

I am using iPhone 5s , internet is not working on cellular data even after it is on , wifi is working properly . Please help apple team.

Hello Mario:
I'm actually surprised that Apple continues to push out 8.02 without addressing these issues. The problem will only anger more users and certainly finger-poking at Airplane Mode isn't the answer. This is an iOS8 code problem and no amount of 'resetting' is providing a reliable fix/solution that sticks.
These issues with loss of cell connectivity, apps that have lost functionality, etc., which are all directly associated to the arrival of iOS8, are so widespread in the user community and pervasive within individual iPads that it's clear there are significant fundamental problems with this release. Given the problems are so blatant, it's fair to ask the question of how they got by the Apple validation team.
What is the status at Apple on rolling out a fully V&V'd version to resolve this? Respectfully, when it comes to some of my more useful apps, my personal iPad has become a paperweight. The user forums are full of these iOS8 complaints for several weeks and there doesn't seem to be a competent answer from Apple. Even a "We're aware and we're working on it" would be well received.
Any hope that you can provide will be appreciated. (I'll be monitoring the thread on my Dell laptop because, well, my iPad is i-Inop!).
Thanks!

Hi, I try to change my password, but I forgot the security questions, and the recovery email address is not my current email (I did setup other two email). Could you please help?

Hi,
Since I lost my phone yesterday, and I try to change my AppleID password, however I forgot my security questions and the recovery email address is very old, not my current one, please help me.

You need to ask Apple to reset your security questions. To do this, click here and pick a method; if that page doesn't list one for your country or you're unable to call, fill out and submit this form.
(125110)

I am using a mac book with snow leopard v. 10.6.8 and want to update to lion - it does not work, how can i do it?

Hi, i have got a macbook, 13" running with snowleopard 10.6.8 . I want to update to mountain lion - this does not work. How can i do it?
Thanks for answering,

What happens when you try?
Error messages?
Is the computer compatible with Mountain Lion?
OS X Mountain Lion system requirements
To install Mountain Lion, you need one of these Macs:
iMac (Mid 2007 or newer)
MacBook (Late 2008 Aluminum, or Early 2009 or newer)
MacBook Pro (Mid/Late 2007 or newer)
MacBook Air (Late 2008 or newer)
Mac mini (Early 2009 or newer)
Mac Pro (Early 2008 or newer)
Xserve (Early 2009)
Your Mac needs:
OS X v10.6.8 or OS X Lion already installed
2 GB or more of memory
8 GB or more of available space

CS6 Bridge (PC) does not show adjustments made in earlier Camera Raw, or even its own Camera Raw! PLEASE HELP.

PLEASE PLEASE PLEASE WILL SOMEONE WHO KNOWS ABOUT THIS CONTACT ME???
CS6 Bridge does not show ANY of the adjustments I've made in previous versions of Camera Raw, and sometimes (intermittently) doesn't show adjustments made in CS6 Camera Raw.
I'm on a PC, I've uninstalled and reinstalled about 6 times. I feel so upset, I've spent literally HOURS going in circles on the Adobe website, trying to get help on the phone (I'll pay!!!) but there seems to be no way to contact anyone. I've posted this problem several times and no one answers.
If you don't know the answer, can you please tell me how to get tech help even if I have to pay for it??

Thanks, Omke. I tried updating, then applying all the same fixes to the updated version. No change.
I can attach a screenshot, but I must block out names and faces. All you'll see is my Bridge interface, not the faces in the portraits. Hope that helps.
My specs:
Bridge CS6 5.0.2.4
Mac OS X 10.6.8
16 GB RAM
65 GB free disk space
2 monitors, 2 graphics cards:
ATI Radeon HD 4870
Type:    GPU
Bus:    PCIe
Slot:    Slot-1
PCIe Lane Width:    x16
VRAM (Total):    512 MB
Chipset Model:    NVIDIA GeForce GT 120
Type:    GPU
Bus:    PCIe
Slot:    Slot-4
PCIe Lane Width:    x4
VRAM (Total):    512 MB

I have a mac os x snow leopard. my problem is that when i go to the ethernet settings it shows 'not connected'. i called the internet person even he couldn't fix it PLEASE HELP!!!!!!!!!!!!!!

Similar Messages

Maybe you are looking for