I have a Mac Os x version 10.5.8, and my current quick time will not play some video footage; which version of quick time should I have or what else would help?
When I try to run certain video, the video stops while the sound continues. What is wrong. What version of Quick time should I be using?
Or is a file that is not supported by QT.
You can use Perian http://perian.org/
Similar Messages
-
I have 4 Apple TV's. All set up to Home share. One will not see the computer. It is also the only 720 I have. The other three are 1080's. How do I get the 4th one (the720) to recognize my Mac?
Need more information to help you, but I am providing some suggestions. Sorry if you are past these type of basic things. But didnt really have much to start with and understand your technical level to start with.
Have you got into Settings > Computers > Turned on Home Sharing (Note: You must use the some Apple ID used by the iTunes library on your MAC for them to see one another)
How is your MAC connected to the network vs the 720 ATV2? Is one WiFi and the other Ethernet? Have you tried switching the ATV2 to WiFi if Ethernet?
Has the MAC been restarted since this started happening? Same with your Router and any other networking device being used? Sometimes an IP conflict can arise in your networking and most consumer networking equipment does not know how to "self heal" without a reboot.
Make sure you have given those things a whirl and share back your results. Any other information you can provide, such as how you connect to your network from each ATV and MAC. -
I have had my mac book pro for about a year and a half and suddenly my dvd player will not play DVDs and i can not play alot of things on full screen. Does anybody know how i can fix this?
This could be several things, but let's get the obvious ones out of the way, first:
1. Judging from your text, there's no problem with anything stuck in the mechanism; it's more an issue of no being to put in a disk. In other words, you're sure that there isn't a disk stuck in your MBP. (That happens a lot for all computers.)
2. Go to Applications/Utilities/Disk Utility, and repair the disk. This should take under 10 minutes.
3. Perform the procedure outlined here:
http://forums.macrumors.com/showthread.php?
4. After you're done, leave a message here as to the status of the repair. -
I recently updated iTunes to version 11.5.5, and now my iPhone 5 will not sync up completely with iTunes. ITunes will recognize and sync up, but I now cannot manage my music on my phone. Also, all of my playlists on my iPhone were wiped out. It would be great to retrieve my phone playlists, but more important, be able to manage my music again. I'm running on Windows 7 and I own iPhone 5. Suggestions?
I have windows 8, I'm not sure if that has anything to do with anything, but i figured maybe 11.1.4 just doesn't like 8. soooo.. i went onto my computer settings and uninstalled anything and everything made my apple and then reinstalled itunes 11.1.3 and it now reads my ipod nano happy day thanks apple for making something that you can't help me with at all
-
My computer is updated but my quick time will not play a mov. file that i exported from final cut on a different Mac , what is the problem?
Final Cut adds some codecs that are not part of normal OS X. If your movie uses one of these codecs it won't play on a system that does not have Final Cut.
Adding these codecs may help:
<http://support.apple.com/kb/dl1396>
If not, ask in one of the Final Cut forums:
<https://discussions.apple.com/community/professional_applications> -
I have an Apple Air Book and I am very satisfied with it except there are video that I cannot see. The reason is that Quick Time will not support the video. What can I do to be able to get these videos? I have all ready download Adobe Flash Player and installed it but it has not effect.
Get Flip4Mac (for Windows Media videos):
http://dynamic.telestream.net/downloads/download-flip4macwmv.asp?prodid=flip4mac wmv
And Perian for everything else:
http://perian.org/
You should be able to play most videos with QuickTime player once both are installed. -
my macbook pro will not play a video without pausing every 11 seconds. PLEASE help me figure out what is wrong. very frustrating. I have already tried restarting
buckmacie,
has the video been completely downloaded onto your MacBook Pro when you start to play it? Or are you playing it while it downloads, AKA streaming it? -
I have thousands of songs dowloaded from my cds and purchased from itunes that will not play. It says file cannot be found. What happened and where are they?
When songs cannot be found, it's either because they have been moved from the original location that you told iTunes, renamed or deleted.
So have you:
renamed songs?
moved them to a different loaction on your computer since you imported them into itunes?
deleted them since you imported them?
stored you iTunes library on an external drive? If so, that drive needs to be on and ready every time before you start iTunes.
... or is another programme renaming or even moving them, such as Windows Media Player? (It has been known to if you let it.) Did you previously use Windows Media Player? -
I have rented a movie 8hours ago, and it will NOT play. The system also charged me twice, for the same movie! How can you help me please?
For the film not playing, you can use the 'report a problem' link from your purchase history : log into your account on your computer's iTunes via Store > View My Account and you should then see a Purchase History section with a 'see all' link to the right of it ; click on that and you should see a list of your purchases ; find that film and use the 'Report a Problem' link.
Not sure whether you can request a refund for the double charge via the same link, if not then you can contact iTunes support here : http://www.apple.com/support/itunes/contact/ - click on Express Lane, then iTunes > iTunes Store -
I just downloaded an album from itunes and 2 of the tracks will not play at all, they cut off. I need help with this??
Does the track play correctly in Quicktime Player? If it does then it is an iTunes issue. If it doesn't then it is possible the file was not completely downloaded, or is corrupt.
Downloading (using iOS or computer) past purchases from the App Store, iBookstore, and iTunes Store - http://support.apple.com/kb/ht2519 - enabled with iTunes 10.3 and newer; not available in all countries; apps, books (not audiobooks), music, t.v. shows, and movies (some - not all studios have permitted this). Movies currently available in the USA only. Downloading previously purchased movies and TV shows requires iTunes 10.6 or later. Discontinued items not available. For items not included in the iCloud list (e.g., ringtones), or locations or computer systems where iCloud is not (yet?) available, you only get one download per fee paid.
If it can be downloaded again, delete the track from iTunes.
Select the store on the left side of iTunes.
Click on Purchased on the right side under Quick Links.
You can re-download your available previous purchases.
If it is corrupt and you cannot download it a second time, contact Apple. Contact iTunes Store support staff through the report a problem links in your account history or,
iTunes Customer Service Contact - http://www.apple.com/support/itunes/contact.html > Get iTunes support via Express Lane > iTunes > iTunes Store -
Premiere Pro CS5.0.4 -Will not play any video- reinstall didn't help
here's my system info -
Model: MacPro5,1, BootROM MP51.007F.B03, 4 processors, Quad-Core Intel Xeon, 3.2 GHz, 16 GB, SMC 1.39f11
Graphics: ATI Radeon HD 5870, ATI Radeon HD 5870, PCIe, 1024 MB
----------------I only use one monitor, 1920x1200, 32bit color depth
------------------No Capture Card, No Sound Card or I/O box
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x8E), Broadcom BCM43xx 1.0
Bluetooth: Version 2.4.5f3, 2 service, 19 devices, 1 incoming serial ports
Serial ATA Device: HL-DT-ST DVD-RW GH61N
Serial ATA Device: TSSTcorp CDDVDW SH-222AL
Serial ATA Device: Hitachi HDS722020ALA330, 1.82 TB
---------- This 2tb Hitachi is my data drive - there are 600GB free (33%)
Serial ATA Device: OWC Mercury Extreme Pro SSD, 223.57 GB
---------This 250gb SSD drive is my system/application drive - 120GB free (50%)
Serial ATA Device: OWC Mercury Extreme Pro SSD, 111.79 GB
------------this 125GB SSD I use as a project-specific drive to serve up video very quickly when i'm generating Video material using the software VDMX
USB Device: Keyboard Hub, 0x05ac (Apple Inc.), 0x1006, 0xfd300000 / 2
USB Device: Apple Keyboard, 0x05ac (Apple Inc.), 0x0220, 0xfd320000 / 3
USB Device: BRCM2046 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0x5a100000 / 2
USB Device: Bluetooth USB Host Controller, 0x05ac (Apple Inc.), 0x8215, 0x5a110000 / 3
FireWire Device: built-in_hub, Up to 800 Mb/sec
i've been using Premiere Pro for about a year and a half with no trouble, no crashes that i can remember. I updated to 5.0.4 when it came out and experienced no problems.
I have not made any changes to my system (drivers, programs, etc.) since the last time i worked with Premiere Pro with no trouble. The only difference is that i generated approx. 52GB of new video files (mov. uncompressed 32bit 640x480 resolution) that i was beginning to edit in to a music video.
My current problem is:: there is absolutely no playback of video in 5.0.4. not in the tiny project window preview, not in the source preview, and not in the timeline/canvas window. when i push PLAY, the button turns into a square STOP button, but nothing happens. this is independent of project or file type. The project i was working on when playback stopped is using uncompressed 640x480 32bit Quicktime files and one 44khz/16bit .AIFF file. as a quick doublecheck, I just added a 640x480 Apple Intermediate Codec file and it also will not play back. I opened older projects and none of them will playback.
My problem started while i was working on a project. I was working on the project for probably an hour and a half with no trouble. Then it seemed to get a bit sluggish and i could hear the HD churning a little more. After rendering out a short section (just under 10 seconds), PPro did not play back the just rendered (now greenline) section. Immediate playback of rendered material was the default behavior, and this was the first time ever that the just rendered section did not play back. I then discovered that no video would play back at all--in any of the windows. I can scrub through all the video without any trouble--all the frames are there.
I shut down PPro, & restarted. No change. I restarted my computer. No change.
Realizing that the problem was likely related to a lack of space on my data drive, i deleted approx. 500GB of files off my 2 TB drive, leaving just under a 1/3 of it free. i checked the drive for errors, and defragmented it. Premiere Pro still wouldn't play any file from any project.
The files are fine, they will playback anywhere else (several different file types involved in different projects). The files are compatible with Premiere Pro (uncompressed VGA resolution Quicktime .mov), i was editing on the timeline with them for hours before all video playback stopped. All other Adobe programs (After Effects, Photoshop work fine).
I tried to find an answer/solution on these forums, unsuccessfully. After uninstalling PPro and reinstall (did not help), and entire Suite uninstall, Adobe Clean, and reinstall, neither version 5.0.0 or 5.0.4 will play video --the no playback problem has persisted.
I was running out of HD space --i had less room than i thought -- down to about 7% of free space, a bone-headed move on my part. I'm not surprised that playback performance got compromised due to lack of space. But i'm shocked that the problem is persisting. Fortunately, i had just backed up my entire system the day before. (i've backed up many times before and this never affected PPro performance)
i tried to "CLEAN" the media cache for the sequence but it had no effect (in searching the forums, i saw somebody else have their 'crashing Premiere Pro' problem solved by hitting this button). I just took a look in the user/application support/adobe/common/5.0 to look at the "Media Cache" folder and the "Media Cache Files" folder. Neither of them are empty, even after hitting the CLEAN cache button in the main preferences 'Media' settings window. I don't know if this is the correct behavior or not. (i'd expect a "clean" command to empty the folder, but i'm not the programmer)
This does not appear to be the ATI/5.0 problem that so many Mac users suffered (i was lucky to never have that problem). Again, i've never had any problems with Premiere Pro over the last year and a half, until working on this latest project with the Hard Drive very low on space. I'm 99.9% positive that's at the heart of the issue.
I don't understand why a clean reinstall did not help in this regard. The problem is clearly PPro specific. I found one topic in the forum where someone else experienced this same "no video playback" problem, but there was never follow-up from the user saying whether or not his problem was solved (or what was done to correct the problem).
I'd love to get some help--- seems to be a very rare issue, but right now, i can do no video editing. btw, i started a new project as well and imported a .mov file -- same problem, no video playback.
the weird thing is that i can actually still edit video. i just rearranged my timeline assets and rendered out a minute-long quicktime (Apple Intermediate Codec) .mov and it looks and plays as it should. This is really weird. I'm baffled -- there must be some way to fix this. I don't want to have to go back to Final Cut, certainly not when i've already paid for Create Suite 5 Production Premium and EVERYTHING works except for video playback in PrPro.
thanks in advance for your help
Message was edited by: magneticjak
Message was edited by: magneticjakhello. hey, thanks very much for writing back. i got some good info with a search or two. (info about what regedit is and what corresponds to it in OS X -- regedit allows you to edit "preference" keys for individual programs, OSX's equivalent for these keys are the .plists in User & System: Preferences and Application Support)
what i ended up doing was uninstalling Premiere Pro (not the suite, just PPro). Then i deleted a few preference files:
from User /Preferences/Adobe:
com.adobe.AdobePremierePro.plist
com.Adobe.Premiere Pro.5.0.plist
and from System Preferences:
the file: Adobe Premiere Pro Prefs
and..
/.../Premiere Pro/5.0/...
AMEPrefs.xml (i noticed that there's also a preference file in Media Encoder's own folder so i didn't sweat this one)
Debug Database.txt
Placeholder Preset.epr
PostEncodeCmds.pref
PresetCache.xml
Trace Database.txt
NOTE:
of course i don't know if deleting any files beyond the 2 .plist files in User Prefs was necessary, but... it seems to have worked.
I then reinstalled Premiere Pro CS5, and fired up an old project and i've got playback of HD and DV files, and snappy editing and rendering, so hopefully i'm good to go. I'm just going to stick with v5.0.0 because i actually don't remember ever having any trouble with it, and i don't remember v5.0.4 adding anything i was 'missing' or 'needed'
hopefully, this thread will be useful for any future folks that run into trouble - and it's got a solution for both Windows and OS X
happy editing,
peace -
Iam new to iTunes. I have donwloaded the player onto my PC. Ihave bought a documentary from the iTunes store, but it will not play. The timer runs, but the screen is black and there is no sound. Any suggestions as to how I can get it to work?
Hi there Graham!
I have a couple of articles that can help you troubleshoot this issue. First, if you are downloading HD content, you will need to know the system requirements for HD playback, which can be found here:
iTunes: Purchasing and viewing HD videos
http://support.apple.com/kb/ht3209
Next, you will want to check your video playback settings on your Windows machine. The steps for that can be found right here:
Troubleshooting iTunes for Windows Vista or Windows 7 video playback performance issues
http://support.apple.com/kb/TS1718
Hope that helps. Thanks for using the Apple Support Communities!
Cheers,
Braden -
I've read the suggestions for fixing this, and none of them work. I've updated my .htaccess to match MIME types for .ogv, I've uploaded the files as both Binary and ASCII, neither method works. The .ogv file plays fine when you load it from a local file, but it will not play when viewed from a remote server. I've confirmed with my hosting company that the .htaccess and all other issues for HTML5 are up-to-date. Safari and Chrome play the HTML5 videos just fine, but Firefox will not. Does anyone have any concrete answers as to what the problem is. I'm also serving up the video files as .webm and .mp4, but neither of these formats works in Firefox either.
That can happen if the server isn't configured properly to send the files with a by Firefox supported MIME type.
*https://developer.mozilla.org/en/docs/Properly_Configuring_Server_MIME_Types
Did you check via the Web Console which headers Firefox receives when requesting the .ogv file?
If that is OK then it is possible that the file is using an unsupported coding method.
* https://developer.mozilla.org/En/Media_formats_supported_by_the_audio_and_video_elements -
Firefox will not play Yahoo videos.I can play them on Safe version of Firefox. What is wrong?
I cannot play Yahoo videos on Firefox.
I can play Yahoo videos on Safe version of Firefox.
I can play videos on other sites (CNN,Fox,....etc.).
I recently updated to the latest version of Adobe Flash.You were on the right track. However, It was the No-Script Extension that was causing the problem. I went to the No-Script Options then General tab and checked the box "Allow top-level sites by default".
I had noticed that as I kept trying to play the videos, a No-Script message popped up about something (don't remember exactly what it said).
The Yahoo videos now play. -
Have just installed latest iTunes version 11.1.4 and now my girls ipod touch gen 4 won't sync with computer. Do I need to reinstall iTunes? We do not have WiiFii. Please help - thanks
I have windows 8, I'm not sure if that has anything to do with anything, but i figured maybe 11.1.4 just doesn't like 8. soooo.. i went onto my computer settings and uninstalled anything and everything made my apple and then reinstalled itunes 11.1.3 and it now reads my ipod nano happy day thanks apple for making something that you can't help me with at all
Maybe you are looking for
-
How to connect my HP Officejet 4500 G510n-z to work wireless.
I recently purchased the HP Officejet 4500 G510n-z, i have it connected to my netgear router which i can see that it is through netgear genie, but my computer will not connect. i have tried turning off my firewall, i have uninstalled and reinstalled
-
Install SAP Solution Manager with DEV instance in the same server (MCOD)
Hello, i would like to install SAP Solutions Manager together with DEV ECC 6.0 in the same host, DEV is currently installed and working fine. I followed note 551915 to convert MS-SQL 2005 to MCOD (change of schema from dbo to dev) and worked fine. Bu
-
Hi there, I have a very simple BPEL process which just use Database Adapter to response result from one table, every thing works ok but a column with 'ROWID' datatype get a wrong data. Which means when the data in table is 'AAAOOMAAPAAAgGVAAl', the B
-
I have panelTabbedPane created thru JSF, which has 2 tabs, i want to reduce the size of the tabs not the whole area. plz find the attached code. <%@ page language="java" contentType="text/html; charset=UTF-8" pageEncoding="UTF-8"%> <%@ taglib uri="ht
-
When using Adobe Acrobat 9 to create a PDF from a word 2007 document - the resulting document has a black box where the footer of the document should be. The black box stretches the width of the document and covers the entire footer.