I have a mac pro and on line classes that i need to add adobe help
How do you down load and use adobe on a Mac Pro to View class
Assuming you're using a Mac and not an iOS device, click here for it.
(65429)
Similar Messages
-
I have a Mac Pro and it seems to have a malware. How can I remove it
I have a Mac Pro and seems like it has a malware, adware . How can i remove it. MACkeeper keeps on popping
You installed the "DownLite" trojan, perhaps under a different name. Remove it as follows.
Malware is constantly changing to get around the defenses against it. The instructions in this comment are valid as of now, as far as I know. They won't necessarily be valid in the future. Anyone finding this comment a few days or more after it was posted should look for more recent discussions or start a new one.
Back up all data.
Triple-click anywhere in the line below on this page to select it:
/Library/LaunchAgents/com.vsearch.agent.plist
Right-click or control-click the line and select
Services ▹ Reveal in Finder (or just Reveal)
from the contextual menu.* A folder should open with an item named "VSearch" selected. Drag the selected item to the Trash. You may be prompted for your administrator login password.
Repeat with each of these lines:
/Library/LaunchDaemons/com.vsearch.daemon.plist
/Library/LaunchDaemons/com.vsearch.helper.plist
/Library/LaunchDaemons/Jack.plist
Restart the computer and empty the Trash. Then delete the following items in the same way:
/Library/Application Support/VSearch
/Library/PrivilegedHelperTools/Jack
/System/Library/Frameworks/VSearch.framework
Some of these items may be absent, in which case you'll get a message that the file can't be found. Skip that item and go on to the next one.
From the Safari menu bar, select
Safari ▹ Preferences... ▹ Extensions
Uninstall any extensions you don't know you need, including any that have the word "Spigot" in the description. If in doubt, uninstall all extensions. Do the equivalent for the Firefox and Chrome browsers, if you use either of those.
This trojan is distributed on illegal websites that traffic in pirated movies. If you, or anyone else who uses the computer, visit such sites and follow prompts to install software, you can expect much worse to happen in the future.
You may be wondering why you didn't get a warning from Gatekeeper about installing software from an unknown developer, as you should have. The reason is that the DownLite developer has a codesigning certificate issued by Apple, which causes Gatekeeper to give the installer a pass. Apple could revoke the certificate, but as of this writing, has not done so, even though it's aware of the problem. This failure of oversight is inexcusable and has compromised both Gatekeeper and the Developer ID program. You can't rely on Gatekeeper alone to protect you from harmful software.
*If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
Go ▹ Go to Folder...
from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return. -
We have 2 Mac Pros and 4 Xserve Raids-
I have 2 Mac Pros and 4 Xserve Raids and want to do a quick fix. I want to hook them all to gather so we can share assets for Final Cut Pro. We have a Fiber Switch and tons of cable. I know that I can’t work on the same project file as the other machine. but can we use the same assets? And will the drives just mount to both of our machines if I just connect them all to the Fiber Switch?
We are planning on an Xsan later this year just not any time to do it.
Oh and a little off subject but can an Xserve Raid mount through the Gigabit connection? I want to connect a couple of laptops to edit some XDCAM video at 35Mbs a sec. Or will I have to wait till we put the Xsan in? Or do all the machines hooked though the Xsan have to be Fiber Channel?
thanx for any help,
Dan.+I have 2 Mac Pros and 4 Xserve Raids and want to do a quick fix. I want to hook them all to gather so we can share assets for Final Cut Pro.+
You can do this but you're begging for trouble. Really. It could be possible to mount shares as read-only on one machine and writable on the other and at least make resources available but if you really want to do this then a SAN is what you want/need. If you're in too much of a rush to implement a proper SAN system you're also in too much of a rush to reproduce a project file or replace a source file that has been corrupted and lost because someone clicked on the wrong thing. Think about it.
+Oh and a little off subject but can an Xserve Raid mount through the Gigabit connection?+
If you're running server you can share out over ether as remote mount via afp or smb but I don't think this is what you're asking. Fibre is the only way to directly mount a drive directly to the desktop and edit video from it if that's what you mean.
+Or do all the machines hooked though the Xsan have to be Fiber Channel?+
XSAN is also *fibre only*. Ether is packeted and out of order and has latency and a bunch of other problems as a streamed data delivery system. You need fibre.
HTH,
=Tod -
I have a MAC PRO and a MAC AIR all dedicated to the same I cloud/Itunes account. i purchased i photo on the air but can i install it on the PRO free as i have already paid for it on my account?
Yes if your system minimum reguirements for hardware and software
LN -
I have a Mac Pro Dual Core, 3 Ghz, that I purchased in the Spring of 2007. What is the latest OS that i can upgrade to? And is that OS compatible with Logic 10?
Logic Pro 10 requires OSX 10.8.4, which is not officially supported on your Mac Pro (must be Early 2008).
There are, however, unofficial workarounds to install 10.8 on those older models that you can search for on Google. -
i plugged in my ipod and now i get the error message: Because a USB device was drawing too much power from your computer, one or more of your USB devices have been disabled" - i have a MAcBook pro and now my USB ports do not work - can anyone help me ???
Sometimes you have to reset the SMC two or three times for it to work, don't know why. I've seen that error message before and 100% of the time it was fixed with an SMC reset. I suppose it's possible that your keyboard or mouse IS drawing too much power, do you have access to another you could try?
-
The light on my power cord is orange. What is wrong with it and how can I fix my computer?
You have a Macbook Pro. A Mac Pro is a desktop. The light on your power cord is orange when it's charging. It turns green once it's fully charged.
Matt -
I have connected to my wireless canon printer but it wont let me print from my mac pro. printer comes up with the message that the paper size doesnt match the printer settings. I have tried to change the settings on the printer but that didnt work. can anyone help
Well... no help was found here.. so I abandoned the wireless- ness of my printer. I bought a
small 10 port hub because only 2 USB ports really isn't enough with wireless mouse, wireless internet
and any kind of printer. I also bought a long USB cable. I now print--wired since this can be done
as an alternative to wireless with this printer. Because I don't want a cable "hanging around"
when the printer is not in use, I simple disconnect it and reconnect when I want to print.
It's a temporary solution others may find helpful as well. Apparently there's been a lot of
confusion and problems getting this printer set up wirelessly with our MacBooks.
Shame on HP for not helping us out! -
http://airparrot.com/download/Mac/AirParrot.dmg
Now like my iOS and MacBook Air I can use apple tv on my Mac Pro tower! Try before you buy!Yes count your self lucky. AirPlay is extremely failure prone and very aggravating to most users. Espeically if you do not have EXTREMELY high end networking hard ware if you are using WiFi. If you insist on going down this road you can look into an app called AirPariot. It might let you use AirPlay..... but again I wouldn't
-
why doesn t my mac pro boot up, i turned it on today and all i get is the white power light on the front of the computer starts flashing, does any body know about this problem?
Which model of Mac Pro do you own?
Check Crucial.com for their opinion, but there are cheaper ways to go. -
I've rented Argo movie and my mac pro keeps saying that it is corrupted. Now I cannot watch or download it in any other device and I'm stucked with this file in my mac pro. How can i start it over or just get my money back and dowload it again using my Apple TV or any other device?
If the download is corrupt then you will need to contact iTunes support - rentals are currently a one-time only download, so you will need to contact support to refund/credit or grant you a re-download.
Try the 'report a problem' link from your purchase history : log into your account on your computer's iTunes via Store > View My Account (Store > View My Apple ID on iTunes 11) and you should then see a Purchase History section with a 'see all' link to the right of it ; click on that and you should see a list of your purchases ; find that rental and use the 'Report a Problem' link and fill in details about the problem (iTunes support should reply within, I think, about 24 hours).
If that process doesn't work (it's been taking people to this site on a browser instead of showing a form in iTunes), then you can try contacting iTunes support via this page instead : http://www.apple.com/support/itunes/contact/- click on Contact iTunes Store Support on the right-hand side of the page. -
cannot send emails on the second account on iPad and iPhone, yet I can on the Mac Pro
Hello Maria,
Most issues with Mail on your iOS devices can be resolved by following the steps in the article below. For your specific issue, you may need to remove the account and add them back in.
Get help with Mail on iPhone, iPad, and iPod touch
http://support.apple.com/en-us/TS3899
Regards,
-Norm G. -
I have Windows XP Pro and it won't launch Firefox 4. Will anything help?
I installed Firefox 4 but it won't run with Windows XP Pro. It just never launches. Eventually I have to shut it down with the Windows task manager. My computer thinks it is running even though the browser window never appear. I have tried uninstalling the program and reinstalling - same thing.
Your problem is really with "Time Machine", backup software included with OS X since version 10.5, not with your Time Capsule router. For more information on Time Machine, check these Web pages:
Time Machine FAQs
Time Machine Troubleshooting -
I was deleting pictures and realized after they were empty in the trash, i deleted some of the icon pictures. Can i get them back?
Time Machine
-
Is there any way I can download 10.5 ?? from the apple site or somewhere online ?
*Mac OS X 10.5 Leopard installation system requirements*
http://support.apple.com/kb/TA24950
Mac OS X 10.5 Leopard installation system requirements
http://support.apple.com/kb/TA24950
Leopard is no longer available at the Apple Store but may be available by calling Apple Phone Sales @ 1-800-MY-APPLE (1-800-692-7753).
If you can't obtain a retail install DVD from Apple, look on eBay or Google the installer part numbers to possibly find at an on-line store. Here's what to look for:
MB427Z/A Leopard 10.5.1 install DVD
MB576Z/A Leopard 10.5.4 install DVD
MB021Z/A Leopard 10.5.6 install DVD (single user)
MB022Z/A Leopard 10.5.6 install DVD (5-user family pack)
Installing Mac OS X 10.5 Leopard
http://support.apple.com/kb/HT1544
Mac OS X 10.5 Leopard Installation and Setup Guide
http://manuals.info.apple.com/en/leopard_install-setup.pdf
After you install the base 10.5, download & install the 10.5.8 combo update at http://support.apple.com/downloads/Mac_OS_X_10_5_8_Combo_Update
Cheers, Tom
Maybe you are looking for
-
I lost my credit card and restored it in my bank, but numbers on new card are different.(the bank account is the same). I'm trying to update credit card info on itunes but it's declined. sometimes it saies that my billing address or countrey is not a
-
How to modify the text in login page?
In login page , there are some lines text: This network is to be used only for legitimate business purposes. If you are not authorized to have access, do not enter this network. By entering the network, you agree to maintain its confidentiality and n
-
Home sharing - can see movie on iPhone, but it won't play.
I've got home sharing set up on iTunes and in my iPhone 3GS. I'm in the process of testing the digitizing of my home DVD library into iTunes, and have made my first attempt. The film works fine in iTunes on my Mac, and I can see it on my iPhone, but
-
Restored hard drive sync issue
I recently had to have a new hard drive installed on our Mac and we used Time Machine to restore it. Now our devices will not recognize the new hard drive so we cannot get them to sync to our computer even though the data was restored. Any suggesti
-
Forcing a vector to become an array.
I have a method I want to call that returns a vector of generic object instances. I want it to return an arraylist of instances of my specific class. neighbors = netGrid.getVonNeumannNeighbors(x, y, false);//vector my VN neighbors. Where neighbors is