I have a mac pro wich will not open windows in boot camp i get to the two options select windows but iyt will not load can you help please
i have a mack pro which will not open in windows from boot camp get to the two options and select windows drive but it will not open can you help Please
Hi there, Well, i thing i might have had the same problem (if you dont mean the selecting part, then try keyboad with usb and without if u dont have a macbook pro or so), i did the same and after selecting windows it said "No bootable disk" or " no boot disk" or something like that and the installer wont start when i was trying to install via CD/DVD.
The sulution is to use 2 usb-drives, one for the support drivers from apple and one for the windows it self after burning the CD/DVD to the usb on a PC using the windows own tools and creating a ISO file.
(there might be problems whit CD/DVD install sometimes)
The ISO file on a own USB is the most importat thing!! (and even apple and windows didnt know that but me and a technikal support guy from the store i bought it managed to fix it after like 4 days )
Hope it work now mate!
Similar Messages
-
The extension Firefox for Norton Toolbar 2011.7.2.3 was just updated to be compatible with Firefox 7.0.1, and it now warns me not to log on to my Facebook account, that it's a fraudulent website, even though it's the same web-site I've always used to log on to Facebook.
Can you help me with this issue?
Thank YouPlease see Norton support for help with that issue.
http://norton.lithium.com/norton/ -
why doesn t my mac pro boot up, i turned it on today and all i get is the white power light on the front of the computer starts flashing, does any body know about this problem?
Which model of Mac Pro do you own?
Check Crucial.com for their opinion, but there are cheaper ways to go. -
I have an older Mac Pro (2006). I want to install Boot Camp and Windows. I have installed a boxed Snow Leapord on the machine. And it says the download of the Boot camp drivers cannot continue because they are not available. But at that point I have not inserted a windows disk, so how does it know i have XP?
So it appears I am limited to Windows 7? And where are the Windows 7/Boot Camp Drivers? On the OS disk?
Finally, since I have necer considered Windows 7 before, I assume there are no compatability issues with mainstream applications that were running in XP?
Thank you.You're welcome
Just remember to reformat the partition (bootcamp partition) to NTFS with the windows installer, ensure to pick the correct partition. -
installed CS6 and all working except Photoshop. Says application will not run on this mac despite my having the necessary system requirement of OSX 10.6.8. Can anyone help please?
Hi - I have opened a second log with the same date and name and am now tracking down the problem.
This seems to be the problem for me: Error "Exit 6" or "Exit 7" | Install log | Read, write, system file errors | CS5, CS5.5 -
Hi, I have a mac pro 2008 eand I was wondering if it possible to connect to the apple cinema 27'' display.
Yes using an apple 5770 video card and a dual link DVI adapter like the Atlona DP400 adapter.
Look at the hits in this google search for lots of other discussions on this topic. -
i am currently using final cut pro 6 and i have a problem that i can not to do a play out to the dvcam but i can record from the dvcam, can you help please?
I believe there is no "Export to Tape" feature as appeared in legacy FCP.
SORRY! Just noticed you are using FCP 6.
You need to ask this question in the Final Cut Studio forum.
Message was edited by: Ian R. Brown -
I backup to an external hdd with Time Machine, when it ran out of space it did not delete old backups, now my internal hdd says its full when before it had heaps of space. I have searched for extra files but cant find any. Can anyone help, please.
First, empty the Trash if you haven't already done so. Then reboot. That will temporarily free up some space.
To locate large files, you can use Spotlight as described here. That method may not find large folders that contain a lot of small files.
You can also use a tool such as OmniDiskSweeper (ODS) to explore your volume and find out what's taking up the space. You can delete files with it, but don't do that unless you're sure that you know what you're deleting and that all data is safely backed up. That means you have multiple backups, not just one.
Proceed further only if the problem hasn't been solved.
ODS can't see the whole filesystem when you run it just by double-clicking; it only sees files that you have permission to read. To see everything, you have to run it as root.
Back up all data now.
Install ODS in the Applications folder as usual.
Triple-click the line of text below to select it, then copy the selected text to the Clipboard (command-C):sudo /Applications/OmniDiskSweeper.app/Contents/MacOS/OmniDiskSweeper
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window (command-V). You'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning not to screw up. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
I don't recommend that you make a habit of doing this. Don't delete anything while running ODS as root. If something needs to be deleted, make sure you know what it is and how it got there, and then delete it by other, safer, means.
When you're done with ODS, quit it and also quit Terminal. -
hi, have a iphone/macbook itunes prob. i connected my phone to mac to add songs, and it wiped 99% of music from my phone. on the mac it still lists the songs on my phone but they are greyed out. can anyone help? very frustrated and want my music back.
I am having the same problem. I have just tried this. Unplug iphone > open itunes > delete all music from itunes library > close itunes > re-open itunes > add music from original folder > plug in iphone > select songs > press sync > unplug iphone using eject button onscreen > checked phone .... still nothing in music folder on phone. On itunes the "On this iphone" tab the songs remain there but greyed out.
-
I know my passcode is correct but when I try to reset my iPad mini it keeps asking for a passcode! have tried restoring, connecting to iTunes and looked for the 'set up as new iPad' notification, but nothing is working? can anyone help please?
If the iPad was running iOS 7, iCloud: Find My iPhone Activation Lock in iOS 7
http://support.apple.com/kb/HT5818
How can I unlock my iPad if I forgot the passcode?
http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
iOS: Device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
How can I unlock my iPad if I forgot the passcode?
http://tinyurl.com/7ndy8tb
How to Reset a Forgotten Password for an iOS Device
http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
~~~~~~~~~~~~~
‘iPad is disabled’ fix without resetting using iTunes
Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
2. Open iTunes with the iPad disconnected.
3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
5. Click ‘Setup as new iPad’ and then click restore.
6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
8. The first stage in the restore process unlocks the iPad, you are basically just cancelling out the restore process as soon as it reactivates the iPad.
If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
~~~~~~~~~~~~~
Try it and good luck. You have nothing more to lose if it doesn't work for you.
Cheers, Tom -
Hi All, I have the latest version of iTunes, however since upgrading I can no longer get iTunes to recognise that any devices (iPhone / iPad) are connected? Can anyone help please. Paul
Try holding down CTRL as you launch iTunes to see if it will repair the drivers.
Or try Cerbu's post here.
Or see TS1538: iOS: Device not recognized in iTunes for Windows, in particular section 5, forcing a driver update.
Please let us know which approach works for you...
tt2 -
I have downloaded iCloud control panel but when I sign in with my iTunes username and password it say they are valid but I don’t have an iCloud account and Iam lost can you help please.
JohnYou are getting this message because you are trying to create an iCloud account on a PC. You can only create iCloud account on an iOS device (iPhone, iPad or iPod Touch) running iOS 5 or higher, or on a Mac running OS X Lion (10.7.5) or higher. After creating your account on one of these devices you will then be able to sign into the account using this ID on your PC.
-
Hi, I have changed my password on my mini ipad after a few drinks and have forgotton the password, can you help please?
iOS: Device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
How can I unlock my iPad if I forgot the passcode?
http://tinyurl.com/7ndy8tb
How to Reset a Forgotten Password for an iOS Device
http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
Saw this solution on another post about an iPad in a school enviroment. Might work on your iPad so you won't lose everything.
~~~~~~~~~~~~~
‘iPad is disabled’ fix without resetting using iTunes
Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
2. Open iTunes with the iPad disconnected.
3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
5. Click ‘Setup as new iPad’ and then click restore.
6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
8. The first stage in the restore process unlocks the iPad, you are basically just cancelling out the restore process as soon as it reactivates the iPad.
If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
~~~~~~~~~~~~~
Try it and good luck. You have nothing more to lose if it doesn't work for you.
Cheers, Tom -
HT1229 i have upgraded to yosmite and los my photos can you help please
lost my photos can you help please.
lost my photos can you help please.
Explain please:
How did you upgrade to Yosemite? Did you make a clean install and wiped the drive? Or did you install on top of the current system? In what way have you lost the photos?
is the iPhoto Library missing? Or do you get an error message, when you try to open iPhoto? What error message exactly?
Have you already updated the iPhoto application? You need to update to iPhoto 9.6 for MacOS X 10.10. The earlier versions will not work. -
I have a licence for CS design stand 4, but I need to reinstall, can you help?
I have a licence for CS design stand 4, but I need to reinstall, can you help?
You can download the trial version of the software thru the page linked below and then use your current serial number to activate it.
Be sure to follow the steps outlined in the Note: Very Important Instructions section on the download pages at this site and have cookies enabled in your browser or else the download will not work properly.
CS3 and CS4:
http://prodesigntools.com/download-adobe-cs4-and-cs3-free-trials-here.html
Maybe you are looking for
-
How to get the focus of particular UI Element
Hi All, How to get the focus of particular UI Element in webdynpro Page, I have a page where i am creating a ALV, I want to get that keyboard focus is on that element is there or not? Can anyone please give some update? Best regards, Rohit
-
Problem with Fetching Million Records from Table COEP into an Internal Tabl
Hi Everyone ! Hope things are going well. Table : COEP has 6 million records. I am trying to get records based on certain criteria, that is, there are atleast 5 conditions in the WHERE clause. I've noticed it takes about 15 minutes to populate
-
I have translated my application. The process that are On load before header doesn't execute. My application is translated from fr-ca to en-us. Any idea ?
-
I can't edit photos in iphoto 11 9.4.1
I just installed an update to iPhoto 11 (version 9.4.1). This required the photo library to be updated, which iPhoto did automatically. Now I can't edit any of my photos. I was able to create a duplicate of a photo, but the Edit Photo function is gra
-
Why does my internet keep cutting out since i downloaded lion
why does my internet keep cutting out since i downloaded lion please can someone help ?