I have a MAC that runs Snow Leopard 10.6.8. The new OSX Mavericks is free for download and I was thinking about upgrading. Will my Creative Suite 4 (Photoshop, Illustrator, Acrobat, InDesign) work with OSX Mavericks?
Was hoping to keep my Creative Suite 4 just a little longer. Will it be possible with Mavericks?
Uh uh, I see!
Also it seems I can use my time machine backup:
http://en.wikipedia.org/wiki/Migration_Assistant_(Apple)
together with Migration Assistant. This would work. Thanks
Now I need to figure out the Windows part. I need a full backup of Windows as well, with all the programs. In particular I need to be sure I can maintain the graphic card drivers.
You don't want to know how long took for me to find out how the **** I could update my graphic card drivers in Windows on my Macbook pro. Unfortunately there was a lot of misleading propaganda from Apple about bootcamp, saying that the new intel processor would have worked fine with Windows. Sad that everything was a lie. When installing Windows with bootcamp the graphic card program was unable to find and install the graphic card drivers update . Took me 2 weeks reading through thousands of angry posts of disappointed costumers to find out how to do that. I do not want to reapeat this dreadful experience.
After one year and a half with my Macbook pro I have a system I am TERRIFIED to touch. It is very very fragile, and any little change can destroy everything. It barely works. that's why I am so scared to re-install the OS
Similar Messages
-
HT1352 After Accepting Update On 32-bit Mac Mini Running Snow Leopard 10.6.8, The Mac Won't Boot
About a month ago, I was using my older Mac-Mini which was running 10.6.8, a screen came up from the Mac App Store, telling me that an update to OS X was available so I took the update.
I regret it now. When the Mac restarted itself, it went down, but it hasn't been back up since.
I've been around Macs a long time now, and I should know by now to restart, quitting all of my apps and everything as much as possible. The Apple updater really should restart before and after a system update, in my humble opinion.
But, I want to get my old Mac running again now.
I've researched this some and I've tried the following
* Disconnected all peripherals, except the monitor, and cycled power.
* Cycled the power and tried to zap the P-RAM (NV-RAM)
* Cycled the power and then hold down the "D" key (for diagnostic).
* Cycled the power again and hold down the Option key (to boot from the original optical disk).
* Cycled the power again and hold down the "C" key (ditto)
* Cycled the power again and hold down Command-V (for verbose mode)
* Cycled the power again and hold down Option-Command-O-F (to get into open-firmare) I don't know if I have an open-firmare password, but nothing else worked.
http://support.apple.com/kb/HT1352
Maybe open-firmare isn't the issue as to why the other key-combinations didn't work.
I've tried a different keyboard and mouse.
I doubt that the problem is a hardware problem. The problem seems so highly correlated with my taking anothing OS update from Apple.@Carolyn, thank you very much for your reply. I appreciate you taking the time to try and help me.
> Hold down the C key to boot from an install disc, not the Option key.
I inserted my Snow Leopard install disk and cycled the power, holding downt he C key and I got to the grey screen with the Apple logo in the center of the screen with a little spinning progress indicator. This is what I always get.
> Try booting in Safe Mode and verify the startup disk for errors.
> Startup your Mac in Safe Mode
> A Safe Mode boot takes much longer than a normal boot so be patient.
I carefully read and followed the link on Safe Mode that you provided and I got the same result as always.
> Once you are in Safe Mode, launch Disk Utility located in HD > Applications > Utilities
> Select the startup disk on the left then select the First tab.
> Click Verify Disk (not Verify Disk Permissions)
Maybe it is something of a hardware problem. Maybe the disk does need to be repaired, but I can't get in to repair it now.
I will keep this in mind when taking updates from Apple in the future.
1. Quit all applications.
2. Verify the disk and repair any errors.
3. Restart.
4. Then, let Apple update my software.
> Boot from your install disc while holding down the C key if Disk Utility reports problems.
> Mac OS X 10.6: Reinstalling Mac OS X
I've done this before, with the same Mac-Mini and the same optiical disk, and it worked.
I also tried starting in target-disk mode, but I always get the same result, the grey screen with an Apple logo and a spinning progress indicator.
I don't know what else to try.
-- Kaydell
http://kaydell.us -
I have a macbook pro running snow leopard. Just recently I cannot view youtube videos and other online videos. I recently updated my flashplayer plugin and I believe that is the problem. Is the latest flashplayer plugin compatible with 10.6.8? If this is so, I need to find an older flash player plugin to reinstall. I do not want to upgrade from 10.6.8 at this time because I have 18 yrs. worth of financial records on Quicken that I have read will not work with Lion and I've read bad things about running music programs on Maverick.
rayvonr wrote:
...I have 18 yrs. worth of financial records on Quicken that I have read will not work with Lion and I've read bad things about running music programs on Maverick.
1) Quicken 2007 for Intel (Snow Leopard, Lion, Mt. Lion and Mavericks) is a full featured app that can be downloaded from Intuit for $15 and will work with your data file if you are using Quicken 2005, 2006 or 2007 (if you version is earlier, let me know for more instructions on easy conversion):
http://quicken.intuit.com/personal-finance-software/quicken-2007-osx-lion.jsp
2) Partition your hard drive, or add an external hard drive and install Mavericks there and "dual-boot" to operate your music programs in Snow Leopard and experiment with them in Mavericks.
DO NOT install Mavericks over Snow Leopard! -
Ok, tried message boards everywhere to try and figure this out before having to post a question. Have a 21.5" iMac running Snow Leopard 10.6.8. After updates no wireless capability for ipad or laptop, imac connects fine but nothing else. No dashboard widgets work, Skype won't work. What goes?
Your post is pretty lengthy and I have to admit I didn't read it all. Please try restarting in Safe Mode, if that doesn't work please do both a SMC and PRAM reset. These may take 2-3 attempts.
SMC RESET
Shut down the computer.
Unplug the computer's power cord and all peripherals.
Press and hold the power button for 5 seconds.
Release the power button.
Attach the computers power cable.
Press the power button to turn on the computer.
PRAM RESET
Shut down the computer.
Locate the following keys on the keyboard: Command, Option, P, and R. You will need to hold these keys down simultaneously in step 4.
Turn on the computer.
Press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
Hold the keys down until the computer restarts and you hear the startup sound for the second time.
Release the keys. -
i have a mac os x snow leopard. my problem is that when i go to the ethernet settings it shows 'not connected'. i called the internet person even he couldn't fix it PLEASE HELP!!!!!!!!!!!!!!
System Preferences > Network > Ethernet? If that shows "not connected" that is all your Mac knows. As far as it is concerned there is no cable connected to the port on your Mac, or the other end of the cable is either disconnected or connected to something that is broken.
Try another cable. If the cable is broken you will also get that status message. If you have exhausted all of these possibilities, the only remaining cause is an inoperative port on your Mac. -
How do I upgrade my Mac Mini running Snow Leopard to Mountain Lion? Thanks
I have a Mac Mini running Snow leapard. I believe i can update it to Mountain Lion but have read I have to first update it to Lion. This is where Im struggling. How do I get a copy of Lion as I cant download it as there is not an App Store on Snow Leapard.
Any help would be great!Upgrading to Snow Leopard, Lion, or Mountain Lion
You can upgrade to Mountain Lion from Lion or directly from Snow Leopard. Mountain Lion can be downloaded from the Mac App Store for $19.99. To access the App Store you must have Snow Leopard 10.6.6 or later installed.
You can purchase Snow Leopard by contacting Customer Service: Contacting Apple for support and service. The price is $19.99 plus tax. You will receive physical media - DVD - by mail.
Third-party sources for Snow Leopard are:
Snow Leopard from Amazon.com
Snow Leopard from eBay
After you install Snow Leopard you will have to download and install the Mac OS X 10.6.8 Update Combo v1.1 to update Snow Leopard to 10.6.8 and give you access to the App Store.
You can purchase Lion by contacting Customer Service: Contacting Apple for support and service. The cost is $19.99 (as it was before) plus tax. It's a download.
Be sure your computer meets the minimum requirements:
Apple - OS X Mountain Lion - Read the technical specifications.
Macs that can be upgraded to OS X Mountain Lion
1. iMac (Mid 2007 or newer)
2. MacBook (Late 2008 Aluminum, or Early 2009 or newer)
3. MacBook Pro (Mid/Late 2007 or newer)
4. MacBook Air (Late 2008 or newer)
5. Mac mini (Early 2009 or newer)
6. Mac Pro (Early 2008 or newer)
7. Xserve (Early 2009)
Are my applications compatible?
See App Compatibility Table - RoaringApps - App compatibility and feature support for OS X & iOS.
Am I eligible for the free upgrade?
See Apple - Free OS X Mountain Lion upgrade Program.
For a complete How-To introduction from Apple see Apple - Upgrade your Mac to OS X Mountain Lion.
Model Eligibility for Snow Leopard and Lion.
Snow Leopard General requirements
1. Mac computer with an Intel processor
2. 1GB of memory
3. 5GB of available disk space
4. DVD drive for installation
5. Some features require a compatible Internet service provider; fees may apply.
6. Some features require Apple’s MobileMe service; fees and terms apply.
Lion System Requirements
1. Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7, or Xeon processor
2. 2GB of memory
3. OS X v10.6.6 or later (v10.6.8 recommended)
4. 7GB of available space
5. Some features require an Apple ID; terms apply. -
I have a Mac OS X Snow Leopard 10.66. Can I download Candy Crush Saga onto my Mac?
I have a Mac OS X Snow Leopard 10.66. Can I download Candy Crush onto my Mac?
You can use the Facebook version that runs on Adobe Flash. I would upgrade to the free update of Mac OS X 10.6.8 to get the latest Adobe Flash from http://www.adobe.com/
According to Wikipedia there is no version independent of Facebook or phone operating systems as of yet. If you can find one, that would be something you might want to contribute to:
http://en.wikipedia.org/wiki/Candy_Crush_Saga
10.6.8 is found here:
http://support.apple.com/kb/DL1399
Note, upgrading to 10.7 or later is not recommended, until you have read this tip:
https://discussions.apple.com/docs/DOC-6271 -
Will firefox 5 run on a mac pro running snow leopard
I like FF but am concerned whether it will run on my mac pro running snow leopard, since the download information says it is a windows program.
Snow Leopard being Mac OSX 10.6
You need to download the version for Mac, not the .exe which is for Windows.
www.mozilla.com or if you prefer a certain language no given then look at http://www.mozilla.org/en-US/firefox/all.html and look down the middle which is Mac OSX. -
I have a Mac OS X Snow Leopard version and my fan keeps coming on. I have been away for a week so it has not been used and yet when I started it up the fan started straight away. Is there anything I can do? Please help! Thanks
Yes, look in Activity Monitor (Applications /Utilities /Activity Monitor.app) and see what it eating up all the %CPU. If anything is over 40%, post the name here to get advice or just kill it straight away with the red 'Quit' button.
If nothing is using up CPU resources, but the fans are going full blast, do an SMC reset. Read the instructions here:
http://support.apple.com/kb/HT3964 -
I HAVE A MAC OS X SNOW LEOPARD OPERATING SYSTEM WITH A SAFARI VERSION 5.1.10. I KEEP GETTING "BLOCKED PLUG-IN" HOW DO I FIX THIS?
Please use the offline installer:
http://fpdownload.macromedia.com/pub/flashplayer/latest/help/install_flash_player_osx.dmg -
I have a Mac OS X Snow Leopard. For some unknown reason the Library application in Finder disappeared and I was using it only two days ago. Please could someone help? Thanks.
Hi cb-anc! Thank you for replying to my question. The Library application has disappeared,not the library folder. I went into the application a couple of days ago to trash some plist files and now the application has disappeared. I haven't upgraded to Lion but am still on now Leopard.
-
How do I find what taking up all my hardrive space on my mac mini running snow leopard ?
How do I find what taking up all my hardrive space on my mac mini running snow leopard ?
Hi Gibby,
How much free space is on the HD, where has all the space gone?
OmniDiskSweeper is likely the easiest/best, and is now free...
http://www.omnigroup.com/applications/omnidisksweeper/download/
And if needed, you can use Terminal to run it in admin mode to see files/folders your user can't see...
http://www.macobserver.com/tmo/article/how_to_recover_missing_hard_drive_space/ -
Hi, I've seen a lot of discussion on this topic but nothing specific to my situation. I have two macs, a personal mac (macbook running Snow Leopard vers. 10.6) and a newer work macbook pro (late 2011 running Lion vers. 10.7.5). I want to use some of the applications at work (that is on the Macbook Pro) that are on my home macbook with Snow Leopard. I cloned the entire HD of my Macbook onto an external drive. The clone seems to have worked as I can use it as a boot disk for the macbook (from which it was cloned). However, if I try to boot the MacBook Pro running Lion, with this same clone on the external drive it won't work. I get a bit of text in the background and an overlay in dark grey saying (in several languages) restart the Mac by holding down the start key etc. I don't know if this has to do with the kernel panic problem or the Lion restore disk business. I don't see the point in trying to do an internal partition of the MacBook Pro hard drive and then add the cloned Snow Leopard, if I can't get the thing to boot externally as it is.
Does anyone have any fixes for what really should be a simple proceedure but is not?Make sure the mac you are cloning from has the combo 10.6.8 update applied to it. The late 2011 models need at least 10.6.7 and better with 10.6.8. So if your older mac is running anything lower than 10.6.7 it will not boot on the 2011 model.
-
Can i run snow leopard on macbook pro puchased new in 2009?
Can I run snow leopard on macbook pro purchased new in 2009?
The Snow Leopard 10.6 DVD should still be available at this time from Apple for $20. You will have to call Apple Customer Care 1-800-692-7753 or 1-800-676-2775 to purchase it. It may still be in the Legacy Products list. The App Store which is required to download 10.7 Lion or 10.8 Mountain Lion is part of the 10.6.6 update.
If you wait to long and they no longer have any in stock you will have to buy it from eBay or Apple resellers that still have stock. But you will have to pay a premium since the DVDs are no longer being made. Snow Leopard DVDs are already over $100 on Amazon.
http://www.ebay.com/sch/i.html?_nkw=10.6+snow+leopard&_sacat=0&_odkw=mac+os+10.6 &_osacat=0 -
I'm using a macbook pro, running snow leopard. Yesterday I got around to emptying my trash for the first time in quite awhile and was surprised by how much there seemed to be in there. Immediately after a question mark symbol appeared on all my hard disk folders. If I click on these question marks I get a message saying ' the item can't be found'.
mpagan47 wrote: a question mark symbol appeared on all my hard disk folders.
Not sure where these hard disk folders are located that you are referring to? Finder, Finder tool bar, Finder side bar, Desktop, Dock?
More then likely they are an alias that not longer point to the orginals, thus the question mark.
I would reboot. Delete icons if an alias and just recreate by dragging from the source. Try right click (control) click to remove.
Maybe you are looking for
-
Firefox showing up to date and out of date at the same time.
Trying to use www.workflowy.com and the sites says my firefox is out of date. Help > About Menu shows I'm at 5.0.1 and up to date, but when I went to http://whatsmyuseragent.com/ it gave me this info: Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US; r
-
Truncate output text in hierarchyViewer component
Hi, I want to display the text with truncated to 30 characters only. I identified the outputText and added the truncateAt attribute and set it to 30. but it doesn't seem to work. Moreover the line - truncateAt="30" is underlined with orange squiggly
-
Hi, I began to learn VHDL, because in the nearer future, I will program a FPGA. At first, I started with ISE. From a tutorial, I got this program: library IEEE; use IEEE.STD_LOGIC_1164.ALL; use IEEE.NUMERIC_STD.ALL; entity TestLED is Port ( clk
-
Define a Multi Language Roadmpa in Solution Manager
Hi gurus. How can I define a multi language roadmap in Solution Manager? I'm defining a roadmap using the RMAUTH transaction, but I've just defined the roadmap in English. I need to have the roadmap in two more languages... What is the procedure t
-
Trouble opening iMovie HD6 projects on iMovie 08.
Hi there, I have just bought a new iMac, with iMovie 08. I have all my prior projects, created in iMovie HD6 stored on a LaCie external drive. The projects read and open on my laptop (running iMovie 06), but show blank files when plugged into the new