I have a macbook (2006) with 10.6 snow leopard installed. Can i get EA's origin and sims. It has a Intel Core 2 Duo

I have a Macbook 2006 with 10.6 snow leopard installed. I was wondering if i could get EA's origin download and sims 3 the game? The laptop has an Intel Core 2 Duo Processor.

Unfortunately no, I have e exact same problem. Our ancient laptops are to the full extent of upgrading available for its time..., I'm trying to find an older version of origin to download to my Mac at the moment... Take my email if you want and if I come across anything ill send you the link. The only other thing I can think of is to upgrade the entire Mac software to the newest version but that includes wiping out the entire system and hard drive and locating the software disc to do that and I'm not even sure if it will process all of that information since apple conciders our laptops "vintage" there's no way to go back because they don't support the software for these older ones anymore.
Sorry.
<Email Edited by Host>

Similar Messages

  • Hello, i have iMac 8,1 ( bought at the end 2008) with Snow Leopard. Could it bear the new OS X Lion ? iMac8,1  Intel Core 2 Duo 3,06 GHz  Ram 2x 2Gb. Your advice ?

    Hello, i have iMac 8,1 ( bought at the end 2008) with Snow Leopard. Could it bear the new OS X Lion ? iMac8,1  Intel Core 2 Duo 3,06 GHz  Ram 2x 2Gb. Your advice ?

    Thanks. It's hot today. Going up to 22ºC today, 24ºC tomorrow, and 26ºC the day after. Almost like summer.
    Have a good one, too.

  • Hi, I have a macbook pro with a new hard drive installed. My WD external drive backup on time machine now wont let me access the files. I get a prompt saying 'you do not have permission to access the files'

    hi, I have a macbook pro with a new hard drive installed and restored. My WD external drive backup on time machine now wont let me access the files. I get a prompt saying 'you do not have permission to access the files' After my new drive was installed I plugged in time machine and it started backing up. I paused it when I realised that it was running for more than a few minutes. I now realise that it probably started backing up the new hard drive all over again. Which makes me think that the original back up must be on the WD back I cant seem to access it. Any ideas would be helpful.

    See E-10 in the first link.
    Time Machine Troubleshooting
    Time Machine Troubleshooting Problems

  • Have a MacBook Pro running 10.5.8 Leopard.  Can I just download 10.6.8 Snow Leopard as an upgrade so I can wifi sync with iPhone and iPad?

    Have a MacBook Pro running 10.5.8 Leopard.  Can I just download 10.6.8 Snow Leopard so I can wifi sync with iPhone and iPad?

    To expand on Niels post...
    First you need to check that your current Mac meets the System Requirements for Snow Leopard...
    Snow Leopard Specs:
    http://support.apple.com/kb/SP575
    If it does... then you need to Purchase and Install the Snow Leopard Disc,
    Mac OS X 10.6 Snow Leopard
    ( It should be noted that Apple will send paid MobileMe members the Mac OS X 10.6 DVD for free.)

  • I have bought macbook pro with Retina display on 7th January. But its price is reduced and its cpu is upgraded to 2.6Ghz. Can I return it and get my money back?

    I have bought macbook pro with Retina display on 7th January. But its price was reduced and its cpu was upgraded to 2.6Ghz in February. Can I return it and get my money back?

    You have 14 calendar days to return an item from the date you received it.
    http://store.apple.com/us/help/returns_refund#policy

  • I have a Macbook with leopard and an iMac with Snow Leopard. Can I sync my iMac contacts and calendar to my Macbook via bluetooth?

    I have a Macbook with leopard and an iMac with Snow Leopard. Can I sync my iMac contacts and calendar to my Macbook via bluetooth?

    I have a Macbook with leopard and an iMac with Snow Leopard. Can I sync my iMac contacts and calendar to my Macbook via bluetooth?

  • I have a new iMac with osx 10.8.3 i can not get my hp laserjet m1522nf scanner to work. The printer works but when in scanner mode the scanner does not show up

    I have a new iMac with osx 10.8.3 i can not get my hp laserjet m1522nf scanner to work. The printer works but when in scanner mode the scanner does not show up.I tried to install the newest hp driver for the printer but when I install the computer ca not find the printer.

    Repair permissions and restart your computer.
    Make sure you have the updated scanner drivers installed. 
    Install the gimp drivers:  http://gimp-print.sourceforge.net/MacOSX.php 
    http://support.apple.com/kb/PH11070 OS X Mountain Lion: Troubleshoot a network printer 
    http://support.apple.com/kb/PH11143 OS X Mountain Lion: Reset the printing system
    http://support.apple.com/kb/HT3669 Printer and scanner software available for download
    What to do when you can't print

  • I have had my Iphone 5s for 2 months and all the fotos and data (fotos and data were not backed up) that I had were erased after I restored it with my old Iphone 4s backup, can I get my unsaved fotos and data back? and if I can, how?

    I have had my Iphone 5s for 2 months and all the fotos and data (fotos and data were not backed up) that I had were erased after I restored it with my old Iphone 4s backup, can I get my unsaved fotos and data back? and if I can, how?

    If you never backed up your phone to iTunes and never backed it up to iCloud all of your content is gone forever.

  • I have an older model iMac with Snow Leopard. Can I download the icloud? and if so where can I do that?

    I have an older model iMac with Snow Leopard. Can I download the icloud? and if so from where can I do that?

    iCloud requires OS X 10.7.2 or later, so you have to upgrade to OS X Mountain Lion or Lion.
    First, see if your Mac is supported > http://www.apple.com/osx/specs If it's supported, open App Store and purchase Mountain Lion. While Mountain Lion is downloading, you can make a backup of your data.
    When the download finishes, the installer will show up, so follow the steps to upgrade Mac OS X. After upgrading, you will be able to log in iCloud in System Preferences > iCloud.
    Also, see if your programmes are supported > http://www.roaringapps.com

  • I am using Xcode 5  on Mac Book with configuration Memory  5 GB 1067 MHz DDR3  and Processor  2.4 GHz Intel Core 2 Duo. It is getting hanged every time  whenever i work on Storyboard.  As my storyboard consists of 25 scenes. Please help I m suffering.

    I am using Xcode 5  on Mac Book with configuration Memory  5 GB 1067 MHz DDR3  and Processor  2.4 GHz Intel Core 2 Duo. It  hangs every time  whenever i work on Storyboard and even on clicking on any of the controller it takes time to open.  As my storyboard consists of 25 scenes. I searched a lot but did not get any results . I have upgraded my xcode to xcode 5.0.2  which is bug free as compare to xcode 5. Please help I m struggling with this problem a lot.

    iTunes for Mac
    http://support.apple.com/en-us/HT201693
    http://www.apple.com/itunes/download/
    Was it installed before? Does it show up in Software Update?
    Do other updates show up there (realizing that Lion is not getting all the updates anymore as it is no longer being supported).
    Apple Downloads
    - Always a place to manual download.
    MacBook Pro
    Mac OS X Lion System Communities

  • How do I erase my hard drive? My initial operating system was Snow Leopard but I have upgraded to Mavericks OS. My Snow Leopard install disk ejects when I try and use it.

    How do I erase my hard drive? My initial operating system was Snow Leopard but I have upgraded to Mavericks OS. My Snow Leopard install disk ejects when I try and use it.

    Do a backup,  preferable 2 separate ones on 2 drives. Boot to the Recovery Volume (command - R on a restart or hold down the option/alt key during a restart and select Recovery Volume). Run Disk Utility Verify/Repair and Repair Permissions until you get no errors.  Reformat the drive using Disk Utility/Erase Mac OS Extended (Journaled), then click the Option button and select GUID. Then re-install the OS.
    OS X Recovery
    OS X Recovery (2)
    When you reboot, use Setup Assistant to restore your data.

  • TS3243 My Desktop Mac won't startup, it turns on to the grey screen flashing question file. I have been able to startup from the snow leopard install cd but once I try to repair within DU the disk never appears in the side panel. The only thing there is "

    My Desktop Mac won't startup, it turns on to the grey screen flashing question file. I have been able to startup from the snow leopard install cd but once I try to repair within DU the disk never appears in the side panel. The only thing there is "Media"... What can I do? Help!

    If Disk Utility cannot see your drive it doesn't look good.
    You could try DiskWarrior. It is expensive but can often fix directory structures where DU cannot.
    Replacing the drive is also a strong likelihood. If you don't have a fairly recent backup, then it might be worth buying DiskWarrior
    additonal notes;
    Gray screen appears during startup

  • I have a MacBook Pro with no DVD drive (Remote Install-ish issue)

    1 MacBook Pro sans DVD, blank HD.
    1 MacBook Pro with DVD, under Lion.
    1 Firewire cable.
    1 Leopard / Snow Leopard install DVD.
    Can I install SL on my old MBP using the DVD on my new MBP via FW ?

    My apologies for writing gibberish.
    I thought this was a more common issue, as I have read a lot about DVD drive sharing and Remote Install but I am not able to find a straight answer to my very simple situation.
    I have one old MacBook Pro that I bought the year 2006. It's the one sporting the Silver keyboard. The DVD drive is Broken (yes, there's a third option smarty pants. ). The Hard Drive in here is Erased.
    I have a new (not retina drive not yet) 2011 MacBook Pro with the Black Keyboard. It came with Snow Leopard preinstalled. Afterwards I installed Lion from the app store, and much afterwards I fabricated a Bootable-Lion-Installer-USB thingy and installed it again.
    Remote Install is Gone on Lion. They say the only option was firewire so I go and buy the firewire and it's still not straightforward. They say just click on the installer and choose the firewire Hard Drive (MacBook Pro) as destination. If I click on the installer it just tells me Leopard cannot overwrite Lion, which I already know.
    So my original question was, trying (and failing miserably) to avoid all danger: If it is possible to install Leopard (The OS that comes in the black and purple hollographic box with a big X) using the Install DVD inserted into the DVD drive of my new 2011 Black keyboard MacBook Pro with a Bootable-USB installed Lion OS connected with a 6 pin to 9 pin FireWire cable to an old MacBook Pro bought the year 2006 with a Silver keyboard and a broken DVD drive and which by the way has the hard drive already erased.
    And if it is, How can it be achieved.

  • MacBook Pro will not read Snow Leopard install disc.

    Trying to install Snow Leopard on daughter's MacBook Pro, which is still on 10.5.8 so that she can install Lion. Her computer refuses to read the Snow Leopard install disc and keeps kicking out the disc.

    Are you using a retail 10.6 disk that looks like this?
    and not the gray install disks that look like this? The Gray Disks are machine specific and only have the drivers for the Mac that they shipped with.

  • My laptop hard drive crashed, used to have lion now it is back to snow leopard. how do i get it back to lion again?

    my laptop hard drive crashed, used to have lion now it is back to snow leopard. i lost all of my info, music, pictures, etc. how do i get it back to lion again? this is very frustrating because i paid $30 to download it and now i am unable to have it again.

    If your Mac is off then start up. As soon as you hear the boot chime, hold down the Option key until the Mac and Windows Disks show up. Then click on the Mac disk and the arrow below it. After it boots up in Mac then go to System Preferences>Startup Disk and select your Mac partition as the Startup disk.
    If you are in Windows then look for the Boot Camp icon on the taskbar. It will look like a gray box sitting on one corner. One of the options when you click it is to restart in Mac OS. After it boots up in Mac then go to System Preferences>Startup Disk and select your Mac partition as the Startup disk.

Maybe you are looking for

  • Installation problem on x86

    I�m installing solaris 9.0 on the compaq presario series and I�m getting some errors while doing the install such as ERROR : Could not create fdisk partition table ERROR : Could not label disks ERROR : could not update disks with new configuration Al

  • OBIEE 11.1.1.5 installation Error on windows 7 64 bit

    Hi, I am unable to install OBIEE 11.1.1.5 in my windows 7 home premimum 64 bit laptop. I got the following error while installation(simple installation) at 'CONFIGURE COMPONENTS' stage, can somebody help me please... INST-08010: Error in validing the

  • Emails getting deleted automatically from inbox?

    Been noticing lately that emails that I've looked at are disappearing from my inbox.  The most recent example being I received an email last Friday and read it.  I went in today to respond to it and its gone.  It doesn't show up under deleted items i

  • Why is my Illustrator file so large, the EPS file is only linked?

    I have an Illustrator CS4 file. I have a 20MB EPS file that I have placed as a link in it. When I go to save it, the Illustrator file becomes 100MB!! Why is this happening? Am I not checking the correct settings when saving the Illustrator file? Plea

  • Initialize a string to null or ""

    String s; When we declare a variable with type String, we need to initialize it. Or we will get compile error "variable s might not have been initialized" My question is which way we should do? 1) String s = null; 2) String s = ""; Or it really depen