I have a macbook 2009 later, when I turn on a fan continuously runs?

I have a macbook 2009 later, when I turned on the computer a fan runs continuously? This just started any suggestions? I waited a day & the same thing happened. Also no light on the maglite when attached to computer.

I would try an SMC reset...You can follow the directions here for how to do that: http://support.apple.com/kb/HT3964

Similar Messages

  • I have a MacBook pro and when I turned it on the number 9, o,l and .  Keys do not work.  Any help?

    I have a MacBook pro and when I turned it on I cannot get the 9, o l and . Keys do not work.   Any help?

    Probably mouse keys
    System Preferences > Universal Access > Mouse and trackpad > Mouse Keys: Off
    Chris

  • I have a MacBook pro. When I turn it on all I get is a grey screen with a small grey spinning thing under the apple. What can I do?

    I cannot turn on my MacBook pro. When I turn it on all I get is a grey screen with a grey spinning thing under the apple. Can anyone help?

    Reinstall OS X.
    Reinstall Snow Leopard without erasing the drive
    1. Repair the Hard Drive and Permissions
    Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
    If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
    2. Reinstall Snow Leopard
    If the drive is OK then quit DU and return to the installer.  Proceed with reinstalling OS X.  Note that the Snow Leopard installer will not erase your drive or disturb your files.  After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
    Download and install Mac OS X 10.6.8 Update Combo v1.1.
    ====================================
    Reinstall Lion, Mountain Lion, or Mavericks without erasing drive
    Boot to the Recovery HD:
    Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    Repair
    When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported then click on the Repair Permissions button. When the process is completed, then quit DU and return to the main menu. Select Restart from the Apple menu.
    Reinstall Mountain Lion or Mavericks
    OS X Mavericks- Reinstall OS X
    OS X Mountain Lion- Reinstall OS X
         Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is
                    three times faster than wireless.

  • I have a macbook 13" late 2009 and would like to connect my TV to macbook to view video with sound. What cable do I need to mack work?

    I have a macbook 13" late 2009 operating system OS10.9.2.
    I would like to connect my macbook to my TV . I have connected a mini DVI / HDMI cable to my tv which works for the picture but have no sound.
    How do I get the sound to work?
    Thanks

    When you connect the MacBook using a Mini DisplayPort to HDMI adapter you will probably need to use external speakers or a 3.5mm stereo headphone jack to RCA sound plugs connected to a stereo sound system if your TV doesn't have separate RCA input plugs or a 3.5mm stereo input plug for audio with the HDMI plug. The Mini DisplayPort to HDMI doesn't carry audio unless you have the Mid 2010 model 7,1 and there're no audio plugs on most TVs to work with HDMI since it's expecting audio with the HDMI. But check your TV manual to see if it has audio plugs that work with one of the HDMI ports.
    If you have the Late 2008 model 5,1 Aluminum Unibody or Late 2009 model 6,1 White Unibody with the Mini DisplayPort rather than the Mini-DVI there is an adapter that uses the Mini DisplayPort and a USB port to combine video and audio to HDMI. It's only 2 channel stereo not 5.1 Dolby Surround.
    http://www.monoprice.com/products/product.asp?c_id=104&cp_id=10428&cs_id=1042802 &p_id=5969&seq=1&format=2

  • I have a MacBook pro late 2011 version it's not booting up so I am trying to boot from a USB recovery drive but when I select it nothing happens it jus goes to the restore options

    I have a MacBook pro late 2011 version it's not booting up so I am trying to boot from a USB recovery drive but when I select it nothing happens it jus goes to the restore options

    Bahamaguy wrote:
    I have a MacBook pro late 2011 version it's not booting up ....
    So what you want is to be able to boot from OS X and retrieve your files
    Create a data recovery/undelete external boot drive
    Of course if it's not booting up, it's easier to fix in place
    ..Step by Step to fix your Mac
    https://discussions.apple.com/community/notebooks/macbook_pro?view=documents#/
    ...so I am trying to boot from a USB recovery drive but when I select it nothing happens it just goes to the restore options
    "Recovery HD" is a partition on your boot drive which you option or commnad r key held at boot time to get into and then repair the Macintish HD partition.
    If you have this on a external USB thumb drive, then that's all it is, no OS X, programs or files.
    If your talking a USB external drive, it has to be a OS X bootable clone made with Carbon Copy Cloner or SuperDuper and the option key held at boot time gives you that boot option.
    Most commonly used backup methods
    So what your saying is you have a external clone and by holding the option key down at boot all you get is it directly going to Recovery HD?
    There is no Startup Manager option to choose what to boot from?
    This could mean Apple changed something, or your external bootable clone isn't one, or the wrong software used so it's not being recognized by Startup Manager as a bootable option.
    What did you use to make the external OS X USB bootable drive?

  • Hi guys i have an macbook 13 late 2007 and does not work when i start it up all u can see is blank white screen and after that its keep bepping high peech tone 3 times i was thinking the hard drive but im not too sure please guys help.

    Hi guys i have an macbook 13 late 2007 and does not work when i start it up all u can see is blank white screen and after that its keep bepping high peech tone 3 times i was thinking the hard drive but im not too sure please guys help.

    Try to reset the PRAM first then go from there.
    http://support.apple.com/kb/HT1379

  • HT4279 I have a Macbook Pro (late 2012) and I would like to connect it to 2 screens simultaneously (1 screen is a TV and can only take HDMI, the other is a larger computer screen and has both VGA and HDMI connections). How can I do this?

    I have a Macbook Pro (late 2012) and I would like to connect it to 2 screens simultaneously (1 screen is a TV and can only take HDMI, the other is a larger computer screen and has both VGA and HDMI connections). How can I do this?

    The article you cited refers to The Mac Pro, a 50lb silver tower -- not a notebook computer.
    Everymac.com says:
    2nd Display Support:
    Dual/Mirroring*
    2nd Max. Resolution:
    2560x1600 (x2*)
    Details:
    *This model supports a simultaneous maximum resolution up to 2560x1600 on two external displays via Thunderbolt. Alternately, it can support a single display up to 2560x1600 via Thunderbolt and a single display up to 1920x1200 via HDMI. Although it can theoretically power all three external displays, as confirmed by a helpful reader, it runs too hot with three displays connected.
    Also see: How many external displays can the Retina Display MacBook Pro models support? What is the maximum supported resolution of each? Are adapters required?
    When using other than ThunderBolt displays, the ThunderBolt port is directly compatible with Mini DisplayPort, and can be forced into compatibility (with Single-Link DVI or HDMI up to 1920 wide) with a simple adapter.
    To adapt to wider displays, an ACTIVE Dual-Link adapter is needed, about US$100.

  • I have a MacBook Pro Late 2011 and having issues with utilities screen.

    I have a MacBook Pro Late 2011. I want to reformat my hdd to start from scratch. My issue is when I am on the utilities screen I am unable to click on anything. I want to delete my current partition but I am unable to click on Disk Utilities. Please help me!

    According to your profile your Mac is running v10.7.3 Lion.
    If that is the case, to reformat the hard drive you need to use Lion Recovery not Disk Utility.

  • Hi i have a macbook pro and when i changed the hard drive the screen wasn't as it was supposed to be which is it had a green colour on it's side.what can i do to fix it and what is the reason for it?

    hi i have a macbook pro and when i changed the hard drive the screen wasn't as it was supposed to be it was green on it's side and blurred.what can i do to fix it and what is the reason?

    either something got damaged when you installed the hard drive or you need to perform a pram reset (other possibilites could have occured, these are the ones I think)
    PRAM http://support.apple.com/kb/ht1379

  • I have an iPhone and when I got it, I had a Toshiba laptop.  Now I have a MacBook Pro, but when I try to wi-fi sync my iphone and new computer, it doesn't work because on my iphone it is still trying to sync with my old computer.  How I can fix this?

    I have an iPhone and when I got it, I had a Toshiba laptop.  Now I have a MacBook Pro, but when I try to wi-fi sync my iphone and new computer, it doesn't work because on my iphone it is still trying to sync with my old computer.  How I can fix this?

    Move the content from the old computer to the new computer.
    Sync the iPhone via cable to the new computer and enable Wi-Fi syncing.
    It should now be possible to sync via Wi-Fi to the new computer.

  • I have a MacBook Air, Late 2010 and would like to make complete copy of, what is best method?

    I have a MacBook Air, Late 2010, and would like to make a complete copy of everything on it. Unsure sure of best external device to purchase or if possible? Can you assist? Thanks

    You will need at least one hard drive. It can be external in its own enclosure with USB 3.0 or 2.0 cable, or an internal HD with a docking station and USB connection. If you live in the U.S., Other World Computing (OWC) is a good place to buy one. You can also get them at Amazon or eBay or any number of places. You will also need cloning software, such as Superduper or Carbon Copy Cloner. You also have Time Machine on your MBA. It is better to have more than one spare disk for backup as HDs can fail at any time.
    Regards.

  • I have a macbook pro and when i go to watch youtube it says i need the newest flash player, so i download it but then i go back to youtube and it still says i need to download it again. How do I make it work?

    I have a macbook pro, and when i go to watch youtube it says i need the newest flash player, so i download it but then i go back to youtube and it still says i need to download it again. How do I make it work?

    Mdjohnson99,
    have you followed the steps on this Adobe page?

  • I have a MacBook Pro Late 2011 and I'm wondering if I install Windows 7 Ultimate to this MacBook Pro with this Full Retail Version. And if so, which bit to use either 32-bit or 64-bit since I have both disks.

    I have a MacBook Pro Late 2011 and I'm wondering if I install Windows 7 Ultimate to this MacBook Pro with this Full Retail Version. And if so, which bit to use either 32-bit or 64-bit since I have both disks.

    64 bit.
    32 bit won't use all your computer's ram.
    64 bit allows you to run 32 bit programs
    Your computer is 64 bit
    New programs use 64 bit.
    There is no reason to use the 32 bit version of Windows.

  • Hi, I have a macbook pro and when using FaceTime outgoing calls it says connecting but it never connects, however, I can receive incoming calls. Does anyone have any suggestions please?

    Hi,
    I have a macbook pro and when making outgoing calls on facetime I get to connecting but it never does connect, however I can receive incoming calls. Any suggestions please?

    Hey there kakitiga,
    It sounds like you are trying to make a call with FaceTime, it never finishes connecting to the person you are trying to reach. I want to recommend the troubleshooting steps from this article named:
    FaceTime for Mac: Troubleshooting FaceTime
    http://support.apple.com/kb/ts4185
    If you encounter issues making or receiving FaceTime calls, try the following:
    Verify that FaceTime is enabled in FaceTime > Preferences.If the issue persists, or if you see the message "Waiting for Activation", try toggling FaceTime off and then on.
    Verify that the Date, Time, and Time Zone are set correctly:
    From the Apple () menu, choose System Preferences > Date & Time > Date & Time.
    Enable "Set Automatically".
    Click the Time Zone tab and confirm the closest city is correct.
    Verify that both parties are connected to an active broadband Internet connection.
    See Mac OS X: Troubleshooting a cable modem, DSL, or LAN Internet connection.
    Consult Using FaceTime behind a firewall for necessary ports to open in firewalls, security software and routers.
    If you encounter issues using a Wi-Fi network, use standard Wi-Fi network troubleshooting to resolve interference and other issues.
    Verify the phone number or email address being used is the correct one activated for FaceTime.You can verify that you are using a valid Apple ID at appleid.apple.com. You can also create an Apple ID or reset your password from this website.
    Verify that both parties have installed the latest software updates for their Mac and/or device. See:
    Mac OS X: Updating your software
    iOS: How to update your iPhone, iPad, or iPod touch
    Thank you for using Apple Support Communities.
    All the best,
    Sterling

  • TS4185 i have a macbook pro and when using FaceTime people are unable to hear me, even though i can hear them

    I have a macbook pro and when using facetime people are unable to hear me, even though i can hear them.

    I have a macbook pro and when using facetime people are unable to hear me, even though i can hear them.

Maybe you are looking for