I have a MacBook 5.1 and want to play movies from my computer onto my TV. I have a mini display port to DVI adapter but when I connect it to my TV nothing happens. What do I need to do?
Hi,
I have just connected my MacBook to my TV with a mini Display port to DVI Adapter which was connected ta HDMI to DVI Video Cable which I connected to my TV. I turned my TV on and my TV could not find any signal. I used the TV menu to connect to HDMI , but it said there was no signal. What do I do now?
try turning on the mirroring option and see if anything changes the following link will show you how to enable mirroring display setting
http://www.ehow.com/how_5661153_set-display-macbook-mirror.html
Similar Messages
-
LR CC has just been installed but when I click on the desktop icon nothing happens, what can I try?
Probably is
You need a minimum of 10GB of free space for normal operations
You need to address that first - the best soution may be to get an external drive formatted Mac OS extended (journaled) and drag your iPhoto library to it - depress the option key and launch iPhoto and point to that library
Hopefully that will let you get started - there may be additional repairs needed
LN -
I have the mini display port cable to hdmi. When I connect I can get audio but on the video I get the display auro screen and can't get my actual display to show as that is not what shows on my display. How can I fix this?
System Preferences>Displays
There is a little white bar. When you have your TV connected, move the white bar to the other display. Your main desktop is now the TV screen -
I have read all the material and still have not found a answer to my question
Copy the ENTIRE iTunes folder from the old computer to the new computer.
-
I tried to download a firmware update but my MBA said the update was unsupported. I'm not super tech, so I'm kind of at a loss. Ultimately, I want to mirror my iPad to the classroom projector so that I can move around while I teach.
Hi Teachingmyself,
Thanks for visiting Apple Support Communities.
If your MacBook Air and projector are not communicating, I recommend the troubleshooting tips found in this article:
Apple computers: Troubleshooting issues with video on internal or external displays
http://support.apple.com/kb/ht1573
Start with these steps:
Confirm display adapters are fully seated in their respective connections and that they are supported models and for the computer and display. Refer to these articles to assist you with adapter compatibility and further configuration information:
Monitor and Display Adapter Table
About Mini DisplayPort to HDMI adapters
Apple Mini DisplayPort adapters: Frequently asked questions (FAQ)
Thunderbolt ports and displays: Frequently asked questions (FAQ)
Reset the system
You can reset the Mac's parameter RAM and SMC.
Best,
Jeremy -
I have a Macbook, 13" screen, purchased in 2007. I want to hook it up to my HDTV; I purchased a mini display port to hdmi adapter but it does not fit. Any suggestions?
If you connect yourMacBook using a MiniDVI/HDMI adapter you will need to use external speakers for audio since the pre-2010 MacBooks will only send video through the MiniDVI or MiniDisplay Port . The MiniDVI/HDMI doesn't carry audio and there's no audio plugs on the TV to work with HDMI since it's expecting audio with the HDMI.
If your TV has a DVI input plug you can use a MiniDisplayPort/DVI adapter. Then a DVI cable to the DVI input plug on the TV. The TV will have RCA audio plugs for use with the DVI. Plus DVI gives a sharper image than HDMI. -
how do i access the data stored on my time capsule? for example, if i try to view a photo, i get the option to "view with iphoto" but when i click on "view with iphoto" nothing happens. i'm having similar trouble openning up movies, music, etc. it appears as though the files exist / saved on the time capsule (because i can see how much storage they consume), but i can't open them. thanks!
Unfortunately, Apple removed the feature to "browse backups" in Time Machine backups of iPhoto a few years ago.
You have to restore the entire iPhoto library to a separate location to be able to "see" it, and then choose the specific images that you want use.
For complete details, see #15 in Pondini's excellent support document Time Machine -- FAQ. Check the information in the pink box there.
Frequently Asked Questions -
I have a disc of Creative Cloud 6. Acrobat Pro does not work. I have used the other programs and they are fine, but when I try to open Acrobat Pro nothing happens. I am using Microsoft System 7.
what's creative cloud 6? do you mean cs6?
what version of acrobat pro do you have installed and what are you clicking to start it? -
My ipad will not swith on. It was working fine an hour earlier but when I press the power on button nothing happens. I have had it on charge just to be safe but no joy. This is a basic first version ipad. What options do I have?
Try a reset. Press and hold both the home and power buttons 10-15 seconds till the Apple logo appears. Release both buttons. Wait 15-20 seconds till your iPad starts on it's own.
-
I have a Macbook 2,1 and want to wipe it clean so as I can give it away. I do not have any original start up disks and wondered how I can do this?
If your Mac is running 10.6 like your signature says, then the 10.6.3 upgrade disks will work as they contain the full 10.6, you need to hold the option key down to select the disk to boot from.
Once booted from the disk, Disk Utility is there to wipe the drive (use the Security Option > Zero) and then reinstall O S X 10.6.3 and then reboot, press the power button down to hard shutdown and the machine will stay like that to boot into the Welcome to Mac video for the next owner to setup.
How to erase and install Snow Leopard 10.6
How do I securely delete data from the machine? -
I have a Samsung HD TV and I purchased a Mini Display port to HDMI Adapter today. For some strange reason I get no display on my HD tv. I even tried switching a few HDMI cables and nothing popped up. I made sure my computer performed all software updates, and I even tried calling Apple Support. They just told me to keep trying different hdmi cables and see if anything pops up. Does anybody know what the problem is? My HDMI cable is from "rocketfish" also my display port is too.
You may have the screen refresh rate set higher than the TV is generally able to track reliably. It may be able to get there most times, but occasionally loses sync because it is out of its nominal range.
I suggest you sit down with the manual for the TV and find out what resolutions at what refresh rates it intends to support through VGA, and make sure your screen settings are near (or below) those limits. -
My ipad 4 is in recovery mode and says connect to itunes, but when i connect to itunes it says nothing. but in the device driver properties on my computer it says my ipad is in recovery mode. what should i do?
please help!See: http://support.apple.com/kb/HT1808 to restore the phone using Recovery Mode. You will lose all content on the phone. This is the only way to bypass the lock screen if you don't have the last computer the phone was synced to.
-
I downloaded adobe cc and am trying to download ps, but when I click on the download tab nothing happens??
Open up the Adobe CC desktop application. There should be an Install or Try button, not a Download button, next to PS in the CC desktop app list.
It sounds like you’re using a browser with https://creative.adobe.com/products That page should work, too, but clicking the blue Download button is going to try to start up a program locally on your computer and you may have answered Disallow at some point in the past or you may have some internet security program that blocks such things so nothing is starting up. -
im having trouble connecting my macbookpro to the tv. im using a mini display port to hdmi adapter, when i switch tv/video to hdmi on the tv nothing pops up, and i dont have the arrangement tap on the display settings, please help!
I've found that the order of operations, so-to-speak, can be important when hooking up mini display port to HDMI. I have the most success with the following operations in this order:
1) Plug HDMI cable into mini displayport adapter (the cable should not be plugged into either the TV or the computer at this point)
2) Plug the mini displayport end of your new super-cable to the computer.
3) Plug the HDMI end into your TV.
4) Switch inputs on your TV to the proper input.
5) If still nothing on the TV, try a different HDMI port on your TV.
Hopefully this helps! Good luck. -
my iphone 4s unexpectedly stopped working, it wont turn on and my sleep key has not worked in months so i am unable to reboot the phone by holding the sleep key and home button . all i see is a black screen that is lit. when i connect it to the charger nothing happens. please help me!
There's no software fix for a hardware issue. Make an appointment at any Apple store, an out of warranty replacement is US $199 for an iPhone 4S. It that's too much money, find a third-party repair service. But, be aware, if a third-party touches your phone, you void all support from Apple & forfeit the right to an out of warranty replacement. Also, since Apple does not sell parts, there is no way to determine if any parts used to fix your phone are genuine or knock offs.
Maybe you are looking for
-
Conecting Mini DVI to HDMI Video Cable with my mac book pro
Hi. I just bought Mini DVI to HDMI Video Cable to connect my mac book pro to my HD TV. I connected the cables and put my TV on HDMI input. On the TV it appears the Snow Leopard Background but I can't see my desktop or the icons. What should I do to v
-
Data acquisition from a 250N Load cell
Hi , I am very new at using the Labview.I am using Labview 6i(PCI 6052E).The load cell(250N) is connected to a pump.The pump has 2 bags.One of them is filled with water and the other is empty.I want to load the bag which is empty from the bag filled
-
I bought my g/f an Ipod for christmas. She uses Windows XP and when trying to sign up for her account on Itunes it always says credit card processing is not avaliable at that time. We have been trying since Dec 22 and as of this morning it still isn'
-
Import packages without Maintenance license
I have installed my test SAP Solution Manager 7.1 to my laptop to Virtulabox. I would try to import the support packages, but I miss maintenance license. Is there any possibility to import packages when I have only a temporary license? I want to just
-
Hi I have a requirement that employee can display,edit,view and confirm his personel data i.e first name,last name.dob etc. Requirement is: need 4 tabs :1 for display data,1 for edit, 1 for review and 1 for confirm. here using bapis for getting data