I have a MacBook Air 4,2 can I connect it to apple tv

I want to connect my Macbook air to Apple TV . I have Mac OS X Version 10.7.5
I also have a desktop OS X Version 10.8.5 I want to proect what I have on my screen to my TV using Apple TV. It does my pictures but I cant get other thing to project. Are my models too outdated?

A supported Mac
AirPlay Mirroring in OS X takes advantage of the hardware capabilities of recent Macs to deliver high frame rates while maintaining optimal system performance. The following Mac models support AirPlay Mirroring when using OS X Mountain Lion or later:
iMac (Mid 2011 or newer)
Mac mini (Mid 2011 or newer)
MacBook Air (Mid 2011 or newer)
MacBook Pro (Early 2011 or newer)
Mac Pro (Late 2013 or newer)
The Mac must also be running 10.8 or higher.

Similar Messages

I have a macbook air and I can't cut and paste in itunes. The right clic does not work. How can I work this out?

I have a macbook air and I can't cut and paste in itunes. The right clic does not work. How can I work this out?

Great tip Stephen!!
I was so frustated from this issue that I used to use Windows iTunes for mass editing info, adding Lyrics etc and then transfering songs to Mac. This tip has alleviated my pain!!
Thanks for the tip. This question should be tagged as answered.

I have a Macbook Air 2011. Can i run Bit-locker in Windows 7 Ultimate without any problems?

I have a Macbook Air 2011. Can i run Bit-locker in Windows 7 Ultimate without any problems?

montana girl wrote:
I purchased a MacBook AIr Nov. 2011 11" and current OS X 10.7.5. I read that I needed to update to Snow Leopard before I can update to Maverick, ...
Whatever you read was incorrect. You can upgrade directly to Mavericks. It is in the App Store and is free.
Snow Leopard predates the operating system you already have. That's the reason it will not install on your MacBook Air. You spent $20 needlessly for it, but it's yours to resell if you wish.

HT204291 My airplay icon is no longer appearing on my Macbook Pro. How can I connect to my Apple TV?

My airplay icon is no longer appearing on my Macbook Pro. How can I connect to my Apple TV?

Restarting MacBook Pro, Apple TV and WiFi router could solve the problem.

I have a macbook air 2,1, can i upgrade this to lion

I have a macbookair 2,1 and I'd like to know if i can upgrade this to lion or not?

Lion or Mountain Lion?
You should be able to. This is for Mountain Lion. Lion link below.
iMac (Mid 2007 or newer) model number 7,1 or higher
MacBook (Late 2008 Aluminum, or Early 2009 or newer) model number 5,1 or higher
MacBook Pro (Mid/Late 2007 or newer) model number 3,1 or higher
MacBook Air (Late 2008 or newer) model number 2,1 or higher
Mac mini (Early 2009 or newer) model number 3,1 or higher
Mac Pro (Early 2008 or newer) model number 3,1 or higher
Xserve (Early 2009) model number 3,1 or higher
Your Mac needs:
OS X v10.6.8 or OS X Lion already installed
2 GB or more of memory (More is better)
8 GB or more of available space
Check to make sure your applications are compatible. PowerPC applications are no longer supported.
Application Compatibility
You can also check by going to the  menu, select About this Mac, click on More info…, then click System Report and select Software/Applications.
If you have applications that you want to use that aren’t compatible, you can retain Snow Leopard and create a new partition to install Mountain Lion on or you can run Snow Leopard server in a virtual mode.
If your computer isn't compatible, you might be able to upgrade to Lion.
Computer Compatibility - Lion
If you can/do upgrade, I recommend you make a copy of the installer and move it out of your Applications folder. The installer self-destructs. The copy will keep you from having to download the installer again. You can make a bootable DVD/USB stick to install using this free program.
Bootable Drive DVD or USB Flash Drive – Lion Diskmaker
From Kappy
Install Mountain Lion Successfully from 10.6.8

I have a macbook air.. Can someone hack my keychain access through an email download attachment link?

I own a Macbook air.. I have just recently went into my gmail account and opened an email from a person that was interested in buying an item that I was selling from craigslist. The email sounded legit, not like a scam.. I usually can spot those out. So then I happen to notice an attachment download link at the bottom, like it was a picture or something. So I opened it, and all of a sudden this "set of keys icon" popped up and starting showing all of my passwords, and certficates, and files from my computer... i went and googled what the keys meant, and it is my computer keychain access.. Which stores and backs up all of my login in passwords and informtion, and administrative options for the computer.. What I am wondering is why would this have opened up as soon as I opened a random email? Am I being hacked for all of my login information, and passwords? Can he access all of what this "Keychain access" is showing me? I am kind of scared and nervous now, because I have never since I have owned this laptop, seen this kind of thing before, expecially opening it up in an email. Please someone, can you give me answers to my concerns. Thank You. Julia.

That was an S/MIME cryptographic signature. The Keychain Access application opened so you could add the sender's public key to your keychain. It's not hacking.

HT3503 i have a macbook air and I need to connect my firewire device to it. Where can I find the correct adapter?

I am trying to connect my presonus firebox that uses firewire to my new macbook air, but I need an adapter. If anybody knows of one please help.

@Christoph: Um, no there aren't. The only thing I know of is the Belkin TB hub, which is $300 & way more complicated (& bigger) than just an adaptor.
http://www.hardwarezone.com/tech-news-belkins-new-thunderbolt-express-dock-revea led-ces-unveiled-2012
If anyone knows of something with TB in and simply one or two FW ports out, that would be extremely useful for this audio guy.
~peter in oakland

I cant remember my administrator password. can anyone advise me how to reset the password without having the original? I have a MacBook Air - Mac OS X 10.6

I cant remember my administrator password. can anyone advise me how to reset the password without having the original? I have a MacBook Air - Mac OS X 10.6

Welcome to the Apple Support Communities
As you are using Snow Leopard, read "Resetting your original administrator account password" > http://support.apple.com/kb/HT1274 You have to start from the Mac OS X Snow Leopard disc, so you need an external optical drive or another Mac or PC to use Remote Install Mac OS X

I have a macbook air and it was logged in on my dads apple id. i also have an apple id and i wanted to transfer that one to my computer. How do i do it?

I have a macbook air and it was logged on my dads apple id at first, then i got an apple id and i want to have my computer logged in on my computer. What am i supposed to do.

Change your old Apple ID using this link:
https://appleid.apple.com/
Click the blue Manage your Apple ID button.
Its password is unrelated to the password you use for the email associated with it.
If you don't remember the Apple ID password, click the Reset your password link.
I already have a new apply id that is set on my phone and ipad. I just want to switch it to that one...
You cannot change your Apple ID to another one that is already in use - in this case, the one you created for your iPnone and iPad. Decide which Apple ID you want to keep. If you need to change it, change it - don't create a new one.

My MacBook Air won't start it's grey with apple logo Howe do I fix this?

I have 2008 MacBook Air today I can't start up. When I press the power button it shows gray screen with apple logo and that thing spinning . How do I fix this?

Take each of these steps that you haven't already tried. Stop when the problem is resolved.
Step 1
The first step in dealing with a boot failure is to secure your data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since your last backup, you can skip this step.
There are several ways to back up a Mac that is unable to boot. You need an external hard drive to hold the backup data.
a. Boot into the Recovery partition, or from a local Time Machine backup volume (option key at startup.) When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.”
b. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, boot the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
c. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
Step 2
Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to boot, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can boot now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
If you've booted from an external storage device, make sure that your internal boot volume is selected in the Startup Disk pane of System Preferences.
Step 3
Boot in safe mode. Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Post for further instructions.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
When you boot in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, your boot volume is damaged and the drive is probably malfunctioning. In that case, go to step 5.
If you can boot and log in now, empty the Trash, and then open the Finder Info window on your boot volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then reboot as usual (i.e., not in safe mode.)
If the boot process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
Step 4
Sometimes a boot failure can be resolved by resetting the NVRAM.
Step 5
Launch Disk Utility in Recovery mode (see Step 1.) Select your startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it may produce. Look for the line "Permissions repair complete" at the end of the output. Then reboot as usual.
Step 6
Boot into Recovery again. When the OS X Utilities screen appears, follow the prompts to reinstall the OS. If your Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
Note: You need an always-on Ethernet or Wi-Fi connection to the Internet to use Recovery. It won’t work with USB or PPPoE modems, or with proxy servers, or with networks that require a certificate for authentication.
Step 7
Repeat step 6, but this time erase the boot volume in Disk Utility before installing. The system should automatically reboot into the Setup Assistant. Follow the prompts to transfer your data from a backup.
Step 8
A dead logic-board battery in a Mac Pro can cause a gray screen at boot. Typically the boot failure will be preceded by loss of the startup disk and system clock settings. See the user manual for replacement instructions.
Step 9
If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store to have the machine tested.

I have a macbook air bought in 2010 wit liquid damage that might has affected the SSD card. I need to get my data but apple won't help. Authorized dealers never seem to have the same model to try whether the SSD card works. How can I get my data quickly?

Hi
I have a macbook air bought in 2010. It has liquid damage that might or might not affected the SSD card. I need the data on my SSD card for work and I need it urgently. Apparently Apple won't get the data out, even if I have apple care... Licensed apple dealers need to have the same macbook air model so they can insert the SSD card and check whether the data is there, and they never seem to have one...
I'm really disappointed with apple. It's been two weeks and I haven't been able to find out whether the SSD card is holding my data. It can't take that long to do it in store... How can they sell a product and then wash their hands on the matter?
Anyway, enough with the apple rant. I need to get this data urgently so I need to find out how I can get it out of the card. The SSD card and data might be fine so I don't want to take it to a data recovery centre and get charged loads.
Thanks for your help.
Olatz

See this link for a 4870 card, best instructs for flashing for a noob like me. (last lowest price was $150 for a 1GB vRAM 4870 from TigerDirect).
http://web.me.com/jacobcroft/4870Flash/4870Flash.html
However, not every 4870 card will work with the ROM currently floating around out there. BEWARE!
Link to recovering a bricked card:
http://forums.techpowerup.com/showthread.php?t=64328

I have a Macbook Air that had some coffee spilled on the keyboard and as a result the plus/equals key is no longer functioning. Can I use a program like Ukelele to reprogram a different key to be my plus/equals key? Can I program a function key? key

I have a Macbook Air that had some coffee spilled on the keyboard and as a result the plus/equals key is no longer functioning. Can I use a program like Ukelele to re-program another key to do that function? Can I re-program a function key to do this function?

Water + electronics do not mix. Something was damaged insode, and the logic board may be corroding as is.
Take it to a Genius Bar for an evaluation and repair estimate.
This is accidental damage and not covered by warranty.

HT203421 i buy a macbook air with my friend and i changed the apple id also.at first i can update the application but now its impossible to update the application.when i clock to update it shows the id of my fren andsomebody do you have idea to solve this

i buy a macbook air with my friend and i changed the apple id also.at first i can update the application but now its impossible to update the application.when i clock to update it shows the id of my fren andsomebody do you have idea to solve this problem.

The first thing to do with a second-hand computer is to erase the internal drive and install a clean copy of OS X. You — not the previous owner — must do that. How you do it depends on the model, and on whether you already own another Mac. If you're not sure of the model, enter the serial number on this page. Then find the model on this page to see what OS version was originally installed.
1. You don't own another Mac.
If the machine shipped with OS X 10.4 or 10.5, you need a boxed and shrink-wrapped retail Snow Leopard (OS X 10.6) installation disc from the Apple Store or a reputable reseller — not from eBay or anything of the kind. If the machine has less than 1 GB of memory, you'll need to add more in order to install 10.6. Preferably, install as much memory as it can take, according to the technical specifications.
If the machine shipped with OS X 10.6, you need the installation media that came with it: gray installation discs, or a USB flash drive for some MacBook Air models. For early MBA models, you may need a USB optical drive or Remote Disc. You should have received the media from the previous owner, but if you didn't, order replacements from Apple. A retail disc, or the gray discs from another model, will not work.
To boot from an optical disc or a flash drive, insert it, then reboot and hold down the C key at the startup chime. Release the key when you see the gray Apple logo on the screen.
If the machine shipped with OS X 10.7 or later, you don't need media. It should boot into Internet Recovery mode when you hold down the key combination option-command-R at the startup chime. Release the keys when you see a spinning globe.
2. You do own another Mac.
If you already own another Mac that was upgraded in the App Store to the version of OS X that you want to install, and if the new Mac is compatible with it, then you can install it. Use Recovery Disk Assistant to create a bootable USB device and boot the new Mac from it by holding down the C key at the startup chime. Alternatively, if you have a Time Machine backup of OS X 10.7.3 or later on an external hard drive (not a Time Capsule or other network device), you can boot from that by holding down the option key and selecting it from the row of icons that appears. Note that if your other Mac was never upgraded in the App Store, you can't use this method.
Once booted in Recovery, launch Disk Utility and select the icon of the internal drive — not any of the volume icons nested beneath it. In the Partition tab, select the default options: a GUID partition table with one data volume in Mac OS Extended (Journaled) format. This operation will permanently remove all existing data on the drive.
After partitioning, quit Disk Utility and run the OS X Installer. You will need the Apple ID and password that you used to upgrade. When the installation is done, the system will automatically reboot into the Setup Assistant, which will prompt you to transfer the data from another Mac, its backups, or from a Windows computer. If you have any data to transfer, this is usually the best time to do it.
Then run Software Update and install all available system updates from Apple. To upgrade to a major version of OS X newer than 10.6, get it from the Mac App Store. Note that you can't keep an upgraded version that was installed by the previous owner. He or she can't legally transfer it to you, and without the Apple ID you won't be able to update it in Software Update or reinstall, if that becomes necessary. The same goes for any App Store products that the previous owner installed — you have to repurchase them.
If the previous owner "accepted" the bundled iLife applications (iPhoto, iMovie, and Garage Band) in the App Store so that he or she could update them, then they're linked to that Apple ID and you won't be able to download them without buying them. Reportedly, Apple customer service has sometimes issued redemption codes for these apps to second owners who asked.
If the previous owner didn't deauthorize the computer in the iTunes Store under his Apple ID, you wont be able to authorize it immediately under your ID. In that case, you'll either have to wait up to 90 days or contact iTunes Support.

I have a macbook and now I have a Macbook Air, So my question is how can I transfer all my stuff from my old mac to my new mac air?

I have a macbook and now I have a Macbook Air, So my question is how can I transfer all my stuff from my old mac to my new mac air?
Thanks

How to use Migration Assistant to transfer files from another Mac
MacBook Air- Use Internet Sharing to optimize data migration
Migration Assistant tips and tricks
OS X Lion- How to use Migration Assistant to transfer files from another Mac

Hello! I have a macbook air and my apple ID is using my old email that I don't remember the password to. I want to switch it to my most recent email. How can I do this?

Hello! I have a macbook air and my apple ID is using my old email that I don't remember the password to. I want to switch it to my most recent email. How can I do this?

Change your old Apple ID using this link:
https://appleid.apple.com/
Click the blue Manage your Apple ID button.
Its password is unrelated to the password you use for the email associated with it.
If you don't remember the Apple ID password, click the Reset your password link.
I already have a new apply id that is set on my phone and ipad. I just want to switch it to that one...
You cannot change your Apple ID to another one that is already in use - in this case, the one you created for your iPnone and iPad. Decide which Apple ID you want to keep. If you need to change it, change it - don't create a new one.

I have a MacBook Air 4,2 can I connect it to apple tv

Similar Messages

Maybe you are looking for