I have a MacBook Air. With latest version of Pages and Yosemite my full-screen function no longer operates.
My full screen function no longer works in Pages after latest software updates for Pages and Yosemite.
Has anyone else experienced this phenomena? It flashes to full screen then immediately reverts to the normal display.
Yes it does.
Open your Pages document in Pages v5.5.1.
To enter full-screen:
Pages > View > Enter Full Screen (or control+command+F)
Hover over the green traffic light in your Title bar. It will show diagonal full-screen arrows. Click.
To exit full-screen:
Hover over the Document Title bar, then Pages > View > Enter Full Screen (or control+command+F)
Move your pointer over the Document Title bar, and press the green traffic light again
Similar Messages
-
I am not computer savy and like my macbook air because as a college student, and father that is very busy, I don't have to learn to re-use it every month after it crashes from a virus. Am I able to load the new version of osx that icloud requires onto this computer without changing it substantially or slowing it down?
If you want to sync it to the iPad from that Mac, you need to upgrade it to at least 10.5.8.
If you want to copy the music to another Mac, you don't. Move the iTunes folder of the item in the Finder's sidebar over as you would any other folder. If you put it somewhere other than the Music folder, launch iTunes with the Option key held down and point it to that location.
(61713) -
Issues with new version of Pages and minimizing size of screen
Is there a way to make the pages window smaller? I usually have multiple windows open when making school notes and the new version of pages only lets me decrease the size of the window to a certain limit which is very frustrating!
Checked with Pages 5.2 and that still exists.
You can Open/Close the Format sidebar but unfortunately you need it most of the time and it is attached to every single document.
RDD (Really Dumb Design).
Pages '08/'09 should still be in your Applications/iWork folder.
Peter -
I have a Macbook Air with Mountain Lion..I upgraded to the latest version called mavericks ox now it crashes a lot...when I use the shift and Caps keys especially. I now have version 10.9. how can I get mountain lion back and get rid of this update?
all of my software was current before i upgraded to maverick....i don't know why this is going on...any help?
-
My MacBook Air has OSX Version 10.9 and suddenly I can no longer access iPhoto. THe message says, 'You can't use this version of the applicaitonn iPhot with this version of OS X. You have iphoto 9.3.2." When I try to update iPhoto, I get a message saying I signed in with a different apple ID and password. This all happened about the same time I got a new iphone. The iPhoto icon has a circle with a line through it.
southiechics wrote:
HEY APPLE! We need help with this. I'm having the same problem. What gives?
Start a new discussion and post it in the iPhoto forum.
Ciao. -
Hi, I have a macbook air os x 10.9.5 and I have problems with the app store. It doesn't open anyway. so, how can I install it again or update. I have problems with preview too, the same, doesn't open the application
Reinstalling OS X Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Reinstalling OS X Without Erasing the Drive
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility and press the Continue button. After Disk Utility loads select the Macintosh HD entry from the the left side list. Click on the First Aid tab, then click on the Repair Disk button. If Disk Utility reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit Disk Utility and return to the main menu.
Reinstall OS X: Select Reinstall OS X and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
Alternatively, see:
Reinstall OS X Without Erasing the Drive
Choose the version you have installed now:
OS X Yosemite- Reinstall OS X
OS X Mavericks- Reinstall OS X
OS X Mountain Lion- Reinstall OS X
OS X Lion- Reinstall Mac OS X
Note: You will need an active Internet connection. I suggest using Ethernet
if possible because it is three times faster than wireless. -
one of first versions of macbook air with black horizontal lines on bottom one third of screen and vertical line also one third of left side of screen
Hi
I've recently notice I have a thin black line in my screen.. I went to Apple store and was told it’s a hardware problem (400$+ to fix as no warranty).
This is the second time I’m having hardware screen issues with a Macbook Air (last time it was 3 months after I bought it, and it was replaced with this one)
Looks like the Macbook Air screens are very problematic! Anyone experience something like that?
Thanks,
Eyal. -
I have a MacBook Air with Mac OS Os10.5.8. I tried to buy from Appel store an upgrade to 10.6... It is impossible outside the U.S. because of zjp cod request. Please What I do to upgrade My operating system
Mac OS Os10.5.8?Welcome to Apple Support Communities
Buy Mac OS X Snow Leopard at your country's Apple Online Store > http://store.apple.com/us/browse/open/country_selector Or buy Snow Leopard from Amazon > http://www.amazon.com -
I have a macbook air with OS 10.7.5 How do I delete Preview history ? Thanks.
I have a macbook air with OS 10.7.5 How do I delete Preview history ? Thanks.
Images can be cleared from history from the menu with File -> Close selected image.
-
I have a MacBook Air with OS X Yosemite 10.10.2. The "cut" function is available in "Edit" but not active upon any file selection. What to do to have it active?
You cannot; it's intentionally disabled to guard against accidental file loss. If you press Option when pasting the files, they'll be moved instead of copied.
(123543) -
I have a MacBook Air with iPhoto 9.2
I have a MacBook Air with iPhoto 9.2 and am unable to open my iPhoto library. It opens and closes immediately. The software is updated. I recently attempted to migrate my software off my old macbook pro, could this have caused the problem?
My macbook pro has iphoto 7.1.5 and the MacAir has iphoto 9.2. and since I did the migration from the mbp to the air, I keep getting this message ... The application “iPhoto” unexpectedly quit while trying to restore its windows. Do you want to try to restore its windows again?
-
I have a MacBook Air with OS X and am having trouble accessing the ADT Pulse Home Security System cameras. The mobile (iPhone and iPad) apps allow access no problem, but I can't get a picture on the MacBook. Have tried Safari and Firefox browsers. Anyone have any ideas? Thanks.
From a Catherine to Katherine -- Had the exact same problem!! I had to enable Java twice - both in Safari and then on the MacBookAir itself.
-
I have a MacBook Air with the Intel Core 2 Duo processor. Will it run Lion?
I have a MacBook Air with the Intel Core 2 Duo processor. Will it run Lion?
Yes, if it has at least 2 GBs of installed RAM.
-
I have a Macbook Air with Lion and have downloaded for the Pico Pix 2055 which I am unable to run. How do I override the security. I have followed the Mac procedure but to no avail :-(.
See the heading "How to open an app from a unidentified developer" on this support page. The instructions apply to installer packages as well as applications.
-
I have a macbook pro with OSX 10.9.3 and Safari 7.0.4. How do I remove BING FROM SEARCHING when i type something into the search bar
See below if the search engine setting was changed without your knowledge and you can't change it back.
You installed the "Genieo/InstallMac" rootkit. The product is a fraud, and the developer knowingly distributes an uninstaller that doesn't work. I suggest the tedious procedure below to disable Genieo. This procedure may leave a few small files behind, but it will permanently deactivate the rootkit (as long as you never reinstall it.)
Malware is constantly changing to get around the defenses against it. The instructions in this comment are valid as of now, as far as I know. They won't necessarily be valid in the future. Anyone finding this comment a few days or more after it was posted should look for more recent discussions or start a new one.
Back up all data. You must know how to restore from a backup even if the system becomes unbootable. If you don't know how to do that, or if you don't have any backups, stop here and ask for guidance.
Step 1
In the Applications folder, there may (or may not) be an application named "Genieo". Genieo may be partially installed even if this item is absent. If it's present, select it and open the Finder Info window. If it shows that theVersion is less than 2.0, download and install the current version from the genieo.com website. This may seem paradoxical, since the goal is to remove it, but you'll be saving yourself some trouble as well as the risk of putting the system in an unusable state.
There should be another application in the same folder named "Uninstall Genieo". After updating Genieo, if necessary, launch "Uninstall Genieo" and follow the prompts to remove the "newspaper-style home page." Restart the computer.
This step does not completely inactivate Genieo.
Step 2
Don't take this step unless you completed Step 1, including the restart, without any error messages. If you didn't find the Genieo application, or if you couldn't complete Step 1 for any reason, stop here and ask for instructions.
Triple-click anywhere in the line below on this page to select it:
/Library/Frameworks/GenieoExtra.framework
Right-click or control-click the line and select
Services ▹ Reveal in Finder (or just Reveal)
from the contextual menu.
If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
Go ▹ Go to Folder...
from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.
A folder should open with an item named "GenieoExtra.framework" selected. Move that item to the Trash. You'll be prompted for your administrator password.
Move each of these items to the Trash in the same way:
/Library/LaunchAgents/com.genieo.completer.update.plist
/Library/LaunchAgents/com.genieo.engine.plist
/Library/LaunchAgents/com.genieoinnovation.macextension.plist
/Library/LaunchDaemons/com.genieoinnovation.macextension.client.plist
/Library/PrivilegedHelperTools/com.genieoinnovation.macextension.client
/usr/lib/libgenkit.dylib/usr/lib/libgenkitsa.dylib
/usr/lib/libimckit.dylib
/usr/lib/libimckitsa.dylib~/Library/Application Support/com.genieoinnovation.Installer~/Library/LaunchAgents/com.genieo.completer.download.plist
~/Library/LaunchAgents/com.genieo.completer.update.plist
If there are other items with a name that includes "Genieo" or "genieo" alongside any of those listed above, move them as well. There's no need to restart after each one. Some of these items will be absent, in which case you'll get a message that the file can't be found. Skip that item and go on to the next one.
Restart and empty the Trash. Don't try to empty the Trash until you have restarted.
Step 3
From the Safari menu bar, select
Safari ▹ Preferences... ▹ Extensions
Uninstall any extensions you don't know you need, including ones called "Genieo" or "Omnibar," and any that have the word "Spigot" or "InstallMac" in the description. If in doubt, uninstall all extensions. Do the equivalent for the Firefox and Chrome browsers, if you use either of those.
Your web browser(s) should now be working, and you should be able to reset the home page and search engine. If not, stop here and post your results.
Make sure you don't repeat the mistake that led you to install this software. Chances are you got it from an Internet cesspit such as "Softonic" or "CNET Download." Never visit either of those sites again. You might also have downloaded it from an ad in a page on some other site. The ad has a large green button labeled "Download" or "Download Now" in white letters. The button is designed to confuse people who intend to download something else on the same page. If youever download a file that isn't obviously what you expected, delete it immediately.
You may be wondering why you didn't get a warning from Gatekeeper about installing software from an unknown developer, as you should have. The reason is that the Genieo developer has a codesigning certificate issued by Apple, which causes Gatekeeper to give the installer a pass. Apple could revoke the certificate, but as of this writing, has not done so, even though it's aware of the problem. This failure of oversight is inexcusable and has compromised both Gatekeeper and the Developer ID program. You can't rely on Gatekeeper alone to protect you from harmful software.
Finally, be forewarned that when Genieo is mentioned on this site, the perpetrator of the scam sometimes shows up under the name "Genieo support." He will tell you to run the provided uninstaller. As he knows and intends, the uninstaller does not completely remove the malware.
Maybe you are looking for
-
I have an external hardrive for MAC, I needed to save something from my work computer so I can pass it on to my MAC, it requiered me to re-format my external HD and now when I connected to my MAC I only have "read only rights". How do I fix it? I run
-
How to "select all" trimming photo length in iMovie
I'm creating a motion capture animation with legos and the default duration for the photo clip is 4.0 seconds. I need to trim them ALL to .5 seconds to achieve the animation I'm looking for but can only see how to do them individually. Is there a "se
-
VM doesnt boot after expanding VHD
Hi, I am running Win2008 R2 HyperV and i was running a VM with a VHD. I expanded 50 GB disk to 80 GB after expanding the VM boots into repair mode and when i click command prompt it goes to x: drive but i can't see C: drive. what are the options to r
-
Can the order of Account segmentation types be changed?
Hi Forum, I believe it can not be, but would like to confirm from the experts. When we create a company with segmentation, the system generates four default segments - Natural Account, Division, Region and Department. Most other ERP systems have it a
-
Server's network drive crashes Finder.
Hi all, Im having a problem where intermittently, trying to open a folder on a home server's networked (AFP) drive is crashing Finder and forcing me to do a hard reboot. force quitting finder DOES NOT fix it. I click on the server on the lefthand s