I have a macbook mid 2007 should i up trade it in for a newer macbook pro

I have a macbook refurbished mid 2007 should i update it for a newer version or a macbook pro?

I have the late 2007 model also, and I am pulling my hair bcause I cannot run anything newer than the Snow Leopard OS, which leaves me with no cloud connectivity, and I cannot run the new iLife... which leaves my iPhone and iPad out of sync (calendars, etc!), and I cannot use my Pages, Numbers, etc on my laptop.
If you just need a machine that is not quite so old and sluggish, you should absolutely invest in more RAM, perhaps a bigger or an additional external hard drive, depending on use.
If you have any other iDevice that uses the newest iOS, do yourself a favor, and if possible, get that new laptop.

Similar Messages

  • Hi, I have MacBook (Mid 2007), It runs on Winodws Xp :( can I instal Mac os?? How can I??

    Hi, I have MacBook (Mid 2007), It runs on Winodws Xp can I instal Mac os?? How can I??

    Start your Mac while holding the X key down. That should force your Mac to start using the OS X partition.

  • My computer (MacBook mid-2007) does not recognise the battery suddenly. A cross appears on the image. I have tried uninstalling and re-installing it but it didn't help. Is the battery dead?

    My computer (MacBook mid-2007) does not recognise the battery suddenly. A cross appears on the image. I have tried uninstalling and re-installing it but it didn't help. Is the battery dead?

    Welcome to the Apple Support Communities
    Try resetting the SMC > http://support.apple.com/kb/HT3964
    If it doesn't work, take the Mac to an Apple Store to get it diagnosed

  • Best RAM configuration for Macbook (mid 2007)

    Hi, I have a Macbook (mid 2007) with 1 GB ram and I would like to upgrade. Currently I have 2x512MB, so both of my memory slots are taken. Is it a good idea to have one 512MB card and a 2GB card in the other slot? Otherwise, what is the best RAM configuration for a mid 2007 macbook?
    I am also looking into purchasing this memory card for my macbook, is this a good choice?
    http://www.amazon.com/Crucial-2x1GB-200-Pin-667Mhz-SODIMM/dp/B000FQ2JLW/ref=sr_1 _3?ie=UTF8&qid=1307335802&sr=8-3
    Any advice would be very much appreciated!

    Kappy wrote:
    In  these early models, Ronda, the benefit is very marginal.
    Yes, I read the figure 128 in regards to the benefit. Something about interleaving, maybe?
    In doing a Google search for that article I saw, I found this:
    http://www.mac-forums.com/forums/apple-notebooks/99215-4gb-ram-my-macbook.html
    the maximum amount of RAM your laptop can take is 3.3GB. So while you can physically insert 4GB of RAM, OS X will only be able to see 3.3GB of it.
    But I don't know how knowledgeable that poster is who says it can utilize 3.3 GB. I do know that the full 4 GB shows up in the System Profiler on my MacBook Core 2 Duo 2.16 GHz.

  • Macbook mid  2007 just booght leopard ?

    The other day i saw an offer on "las units"on some notebooks on a store (compumundo, argentina), between them there was a macbook mid 2007 unit (2.16ghz white one), the normal price for a similar (but newer) model here is 6999 argentine pesos (1 u$s = 3.17 Arg. pesos), and they were oferring it for 4000 (since it had a scratch, that ended up being glue :P). Since here a c2d 13.3' notebook costs 5000 or more pesos, and comes with a 1.6 ghz one for that price, i had to buy it (i was looking for a nb).
    Now my question: my mac came with tiger, do i have to buy Leopard ? or can i get it "for free" since i just bought my macbook ? (for some reason the online warranty check says the warranty last till june 2008, so i had to fax the receipt with the correct info for them to change it).
    pd: compumundo is an authorized resealer

    You have to buy it yourself. New Macbooks come with Leopard installed.

  • MacBook (Mid 2007)

    Is a MacBook (Mid 2007) compatiable with snow leopard?

    Sorry. Unfortunately, I only speak English with a translator
    Google. I will try to explain my problem is easier ..
    I have an old MacBook release mid-2007. Memory it has 2 GB. So I would like you to know whether you can buy and install .. 4GB of memory?
      Thank you!
    Hard drive - 250 GB. Divided into 2 sections and installed 2 operating system Snow Leopard 10.6 and 10.7 Lion
    Hardware:  Here are details of my MacBook
       Model Name: MacBook
       Identifier: MacBook2, 1
       Processor Name: Intel Core 2 Duo
       Processor speed: 2.16 GHz
       Number of Processors: 1
       Total number of cores: 2
       Cache Level 2: 4 MB
       Memory: 2 GB
       Bus Speed: 667 MHz
       Version of the Boot ROM: MB21.00A5.B07
       Version of the SMC (system): 1.17f0
       Serial Number (system): W87207PYYA3
       Hardware UUID: 00000000-0000-1000-8000-001B631CF9C4
       Sudden Motion Sensor:
       Status: Enabled

  • Boots only in Safe Mode - Macbook mid 2007

    My Macbook mid 2007 with Snow Leopard will not boot correctly. The only successful means is Safe Mode (key S during boot).
    All measures published in various postings have been conducted without any peripheral devices. These are:
    verify harddisc
    verify RAM
    resetting PRAM and NVRAM
    A detailled overview can be found under here.
    The existing original RAM and harddisc were successfully tested using a second identical Macbook. A new installation of Snow Leopard on the harddisc using the second Macbook was successful and started in this second Macbook as expected. This harddisc was then inserted into my Macbook, but it would not boot. Hence it is safe to exclude problems with RAM and the harddisc.
    Attempts to boot with the Snow Leopard DVD (either via C plus boot or Option during boot and select Install DVD) are not successful. Attempts to boot from an external drive are also not successful. The boot process (regular, DVD, external) progresses to different states including grey screen with Apple and frozen wheel. There is no consistency.
    From the various postings I have found and studied along with my numerous tests, I have deduced the following possibilities:
    There is a problem with the GPU.
    There is a problem with the keyboard (maybe someone spilled something).
    I have found numerous solutions for "boots only in Safe Mode". All include booting via Install DVD, but this does not work in my case.
    I have exhausted all my possibilities. Hopefully someone can provide more insight.

    lruetimann wrote:
    What I am not able to test is booting with an external CD/DVD drive. However, there is no indication that the built-in drive is malfunctioning.
    If you have a second MacBook (#2 working OK), you could use its CD/DVD drive loaded with the 10.6 DVD as the target disk to boot into, as the first Macbook (#1 the troubled one) reportedly cannot see a 10.6 DVD normally.
    How to use and troubleshoot FireWire target disk mode
    In your case this would be:
    With the MacBook(1) on (Host), the MacBook(2) off (Target) connect the firewire cable.
    Start the MacBook(2), hold T key to make it the boot drive. It will appear on the MacBook's(1) Desktop.
    Insert the 10.6 Install DVD into the MacBook(2).
    It too will appear on the MacBook's(1) Desktop.
    From the MacBook(1), select Restart and hold down the Option key to select Start-up Manager.
    From Start-up Manager, select the 10.6 Install DVD which will take you into the installation.
    If this occurs, then you have booted into the install 10.6 DVD, From there you could try and install it, see what happens.
    However, if it does not see the DVD disk, then this would indicate a defect in the logicboard (motherboard), though which component I would not guess.
    If it does see the DVD, in Macbook (2) and can boot into it,… I'd be surprised!

  • Nominal/Original battery charge capacity of genuine batteries for 13'' macbook (mid 2007)

    Hello everyone,
    I just wanted to ask which is the nominal battery charge of a genuine (from Apple) battery for a 13'' macbook (mid 2007). I have just bought a new one, and it has a nominal capacity of about 5500 mAh. I just would like to check if it is in good condition.
    When my old battery stopped functioning I checked some information in the web and arrived to the followings conclusions:
    Webpages:
    http://batteryuniversity.com/learn/article/how_to_prolong_lithium_based_batterie s
    http://www.apple.com/batteries/notebooks.html
    Conclusions:
    - Lithium-based batteries have no memory charge effect. This means, that you don't need to be careful about charging-discharging the battery to 100% and 0% sometimes every 3 months. It also means that you can keep the battery in good health conditions not charging-discharging it at all.
    - When you are not going to use your notebook for some months it is best to keep the battery at 40-50%charge (it radically increases your battery lifetime).
    - It is also good to keep your battery at "low temperature" when not using it. It seems that 0-20ºC is ok. For example 40ºC is really bad for your battery.
    If anyone has any comment about my "conclusions", it will be useful form me .
    Thanks for the information in advance,
    Jesus

    Call Apple Customer Support 1-800-767-2775 (telephone numbers for other countries - http://support.apple.com/kb/HE57). Provide the serial number and specifications of the Mac.  They may be able to provide a replacement set of discs for a fee.  These discs will be for whatever OS was installed on the computer originally, so if you have an upgraded version you will need to obtain the discs some other way.
    You may want to just upgrade to a newer system version. Snow Leopard 10.6 would be a good one for that computer but you would need to make sure it has enough RAM to run it.  It would only cost $29 to get Snow Leopard from Apple and for the next 30-45 days until the next OS release in July it is still relatively up-to-date.
    Get more information about your computer. Go to the Apple in the upper left corner of any window, then "About This Mac", then "More Info..."  Copy and paste the information here, but omit the serial number and Hardware UUID (if present).
    Snow Leopard 10.6 Technical Requirements - http://support.apple.com/kb/SP575 - note by K Shaffer - http://discussions.apple.com/message/12921514 : "Some early Intel-based Macs can't use Snow Leopard 10.6 installers; of those, the Core Duo (not 2 duo) were suspect and had issues." - and a qualifier by "a brody" http://discussions.apple.com/message/13028822 : "I think that refers to the ones without at least 1 GB of RAM."

  • Lost garageband with reinstall macbook mid 2007 with os x 10.7.5

    i lost garageband with reinstall macbook mid 2007 with os x 10.7.5 how do i get it back i can't download from app store cause its not supported

    return it and get the one from Apple.  Most 3rd party batteries are junk.

  • IPhoto for macbook mid 2007

    I deleted iPhoto from my macbook (mid 2007, msc os 10.5.8) more than a year ago. Now I extremely need it , but could not recover it. Is here a way for some how to download the appropriate iPhoto version for my macbook?

    Welcome to the Apple Support Communities
    Insert the iLife DVD or the second disc that came with your computer to install it. Then, go to  > Software Update and install the latest version. You can also buy iLife '09 in Amazon

  • Hi. When i place in the battery in my macbook mid 2007, The mouse wont work correctly , its hard to click  ? why?

    Hey, when i place the battery in to my macbook mid 2007 , the mouse gets hard to click. If i hang it little bit loose and place it on the table i cant click at all nearly. why ? please help me

    Before you buy a new battery, try resetting the SMC.

  • HT201257 I have an iMac (Mid 2007) upgraded to Lion OS. My fan runs all the time at high speed. I tried the SMT reset without results. I could not try the AHT test because it is not on my computer or install disk. Any suggestions what I can do to correct

    I have an iMac (Mid 2007) upgraded to Lion OS. My fan runs at high speed all the time. I reset the SMT without results. I had no way to do the hardware test.
    Can I fix this high fan speed?

    Open Activity Monitor in the Utilities folder.  Select All Processes from the Processes dropdown menu.  Click twice on the CPU% column header to display in descending order.  If you find a process using a large amount of CPU time, then select the process and click on the Quit icon in the toolbar.  Click on the Force Quit button to kill the process.  See if that helps.  Be sure to note the name of the runaway process so you can track down the cause of the problem.
    If the above doesn't help then create a new user account. Log into the new account. Does this fix the problem?

  • Hi i bought a macbook pro 8 and half mounths ago. Today i had the hard drive replaced as it was faulty and on Monday i have to take it back to the Apple shop to have the Motherboard replaced. I feel that i should be asking for a new macbook, where do i st

    Hi i bought a Macbook Pro 8 & a half mounths ago.Today i had the hard drive replaced as it was faulty and on Monday i have to take it back to the Apple shop to have the Motherboard replaced. I feel that i should be asking for a new macbook, where do i stand.

    Yes thats what i thought but i only have 77 days left on my garentee so its a worry, and have to drive 1 hour to get to closest Apple shop, spent the whole day there today when i should have been at work and have to make the drive again on Monday Then back again next Friday to pick it up. I paid over £1000 ponds for this computer so wouldnt expect it to have its insides replaced befor a year. Feel very let down, and no longer love my macbook pro.

  • Can i install OS X Mountain Lion on my MacBook (Mid 2007)?

    Hi all,
    Can i install OS X Mountain Lion on my MacBook (Mid 2007)?
    thanks

    No, your MacBook must be one of the following models:
    MacBook (Late 2008 Aluminum, or Early 2009 or newer)
    Read these articles
    http://reviews.cnet.com/8301-13727_7-57470261-263/older-64-bit-macs-out-of-the-p icture-for-mountain-lion/?tag=mncol;txt
    http://reviews.cnet.com/8301-13727_7-57387846-263/will-your-mac-run-mountain-lio n/   

  • How do I download Windows 7 64 bit drivers for my new MacBook Air (Mid 2011) from a Windows 7 PC?

    How do I download Windows 7 64 bit drivers for my new MacBook Air (Mid 2011)? I have already formated the HD and preformed a clean install of Windows 7. Perhaps I did this too early. I have read I need to install the drivers from my OS X DVD, however, OS X Lion does not come on a DVD! I've also read that I can download OS X Lion from the App Store and burn it to a DVD, however, all I have are Windows PCs which don't support the Mac App Store.
    Is there no way for me to download these drivers from a Windows PC?  I know they exist.  However, you are supposed to download them through Boot Camp in OS X when you are creating a new Windows 7 installation.  I'm I stuck?

    I am pretty disappointed in the lack of documentation.
    This is the Apple Support page for Boot Camp:
    http://www.apple.com/support/bootcamp/
    No mention anywhere of Lion, of 4.0/4.01
    In the past, 10.6.6+ was suppose to - and sometimes did - provide for a download drivers from within Boot Camp Assistant program, in order to save them to flash or such (that should be about 1GB, too large for CD). Some macs req'd a USB-DVD or other driver that was needed pre-install of Winidows
    You don't install Apple drivers until after Windows is installed otherwise,
    It is possible for me, with a tower, to run w/o needing any drivers from Apple. But with laptops, mini, you do need some drivers from Apple for graphics, internet, wireless, SMC support.
    And right now, loading any Apple support Tech Note articles is very very slow.
    People keep asking why Apple can't post 3.0 or 4.0 like they do the updates. Only logic is to force t he download from inside OS X or from an OS X DVD. Otherwise would be here, and avoid all the trouble. they aren't of use on a PC, and any PC motherboard vendor does post their support software for download.
    Apple Support Downloads #bootcamp

Maybe you are looking for

  • BI Content 7.57 SP4 Activating Process Chain

    Hi, I am trying to activate a process chain from BI content . My source system is ERP 6.0. While collecting objects for activating this Process Chain BW gives an errors. It says some of DTP and Transformations are missing. I have put two of the error

  • Skype To Go Error

    Hi, I wonder if you can help me out, I have bought 2 Skype subscriptions in order to call my friends via Skype to go, however whenever I click on the Skype to Go menu (as I want to add lical numbers) the following error comes up. 1) Application skype

  • Does Premiere Pro support a "self-record" mode?

    Does Premiere Pro support a "self-record" mode? It would record a new video with the source being what you are previewing, in terms of "animation" rather than in terms of the quality seen on screen. I often like to make humorous effects by dragging t

  • Slapd errors in log

    I had a bit of a melt down on my server and had to blow away OD and restore it from a backup. All is working fine, except I have repeaded slapd messages in the log. slapd[410]: SASL [conn=2341] Failure: realm changed: authentication aborted Any ideas

  • How to provision bootstrapped users to use portal

    We are running OID 10.1.4 and have successfully configured the AD/OID bootstrap and our sync process is running. However, I can not login to portal using any of the users. I can use the oiddas to create a user and login to portal with it, the new use