I have a MacBook Pr, year 2011.

I have a MacBook Pro 13inch, year 2011. All these years it has been running smoothly until this morning when I turn it on a bar under neath the apple log appear and then it shut down. I tried what other people suggested but didn't work. I tried to go on the safe mode. I tries pressing command, option, P and R which didn't work. I even tried erasing the whole drive and reinstalling mavericks again

Hello, ssjgohan25.
Thank you for visiting Apple Support Communities.
Here is a troubleshooting article that I would recommend going through when experiencing this issue.
Mac OS X: Gray screen appears during startup
http://support.apple.com/kb/TS2570
Cheers,
Jason H.

Similar Messages

  • I have a Macbook Pro june 2011... I have 8GB ram but I only have 256mb VRAM... I've read some other questions about this and I realized... Why do I not have 560mb of VRAM since I have 8GB of RAM? Is there any way to get more VRAM to play games on steam?

    I have a Macbook Pro june 2011... I have 8GB ram but I only have 256mb VRAM...
    I've read some other questions about this and I realized... Why do I not have 560mb of VRAM since I have 8GB of RAM?
    Is there any way to get more VRAM to play games on steam?
    I've learned  by reading other topics that I can't upgrade my graphics card on my Macbook Pro because it's soldered into the motherboard or somthing like that, but please tell me if there is any way to get more video ram by chaning some setting or upgrading something else. I'd also like to know why I only have 256MB of VRAM when I have 8GB of RAM, since I have 8GB of RAM I thought I was supposed to have 560mb of VRAM...
    So the two questions are...
    Is there any way to upgrade my VRAM, so that I can play games on steam?
    Why do I only have 256MB VRAM when I have 8GB total RAM?
    Other Info:
    I have a quad core i7 Processor.
    My graphcics card is the AMD Radeon HD 6490M.
    I am also trying to play games on my BOOTCAMPed side of my mac, or my Windows 7 Professional side.
    THANK YOU SO MUCH IF YOU CAN REPLY,
    Dylan

    The only two items that a user can change on a MBP are the RAM and HDD (Retinas not included).  You have what the unit came with and the only way you will be able to change that is to purchase a MBP with superior graphics
    If you are very much into gaming, the I suggest A PC.  They are far superior for that type of application to a MBP.
    Ciao.

  • I have a Macbook Pro Early 2011 from the USA.  After installing Mavericks, Adobe CS6 crashes whenever it is plugged into a 27inch cinema display I purchased from the apple store in China (We moved to China). It works when not plugged into 27inch display.

    I have a Macbook Pro Early 2011 from the USA. It is now running Mavericks.  I connect it to a 27" Cinema Display that I bought in China after we moved to China.  Before I installed Mavericks, I could run all of the Adobe CS6 and Adobe CS5.5 applications on my Macbook Pro while connected to the cinema display. Now that I have Mavericks installed, whenever I am connected to my 27" CInema display my Adobe applications crash upon opening.  I know this is a rare scenario, but does anyone have any ideas how to fix this problem? Is there a new driver that needs installed?  I'd appreciate any help.

    I am also having a similar issue. I used Adobe Lightroom and my whole display goes black. Even my laptop screen and the lights on the keyboard go black. I can still hear the fan running, so I assume it is just the display. This is my first Mac and I have had nothing but issues. I think I am going back to Windows after this.

  • I have a Macbook pro mid 2011 and just bought the Apple TV. While watching program or movie from any of the apps such as Watch ABC, the program keeps stopping and starting constantly.

    I have a Macbook pro mid 2011 and just bought the Apple TV. While watching program or movie from any of the apps such as Watch ABC, the program keeps stopping and starting constantly.

    That would indicate a network issue.
    Reboot ATV and router
    Make sure DNS is set to auto
    Ensure router is up to date, if on wifi try ethernet
    Go to istumbler.net to get a report of the network, look for signal strength and noise

  • Serial number? I have a MacBook Air (mid 2011). When I go into about this Mac, all it says for serial number is systemserial

    Serial number? I have a MacBook Air (mid 2011). When I go into about this Mac or any of the other ways to look up the serial #,all it says for serial number is systemserial#. Is there a way to fix this?

    About This Mac will show something like this:
    Click on More Info... leads to some thing like this:
    Serial Number is the second line from the bottom.

  • I have a MacBook Pro Late 2011 and I'm wondering if I install Windows 7 Ultimate to this MacBook Pro with this Full Retail Version. And if so, which bit to use either 32-bit or 64-bit since I have both disks.

    I have a MacBook Pro Late 2011 and I'm wondering if I install Windows 7 Ultimate to this MacBook Pro with this Full Retail Version. And if so, which bit to use either 32-bit or 64-bit since I have both disks.

    64 bit.
    32 bit won't use all your computer's ram.
    64 bit allows you to run 32 bit programs
    Your computer is 64 bit
    New programs use 64 bit.
    There is no reason to use the 32 bit version of Windows.

  • Cannot install lion from mac appstore. i have a macbook pro early 2011 model with 10.6.8 and i keep getting a wierd error NSInternalInconsistencyException i have no idea what to do.

    I cannot install lion from mac appstore. i have a macbook pro early 2011 model with 10.6.8 and i keep getting a wierd error NSInternalInconsistencyException i have no idea what to do.

    I changed my wireless broadband to a landline-base DSL wifi and it works like a charm. Sun was the culprit even you fiddle with its router and disable firewall, it won't work.
    try changing yours too and let me know how it goes.

  • I have a MacBook Pro Late 2011 and having issues with utilities screen.

    I have a MacBook Pro Late 2011. I want to reformat my hdd to start from scratch. My issue is when I am on the utilities screen I am unable to click on anything. I want to delete my current partition but I am unable to click on Disk Utilities. Please help me!

    According to your profile your Mac is running v10.7.3 Lion.
    If that is the case, to reformat the hard drive you need to use Lion Recovery not Disk Utility.

  • Can't find the Airplay icon! I have a Macbook Pro Late 2011

    I have a MacBook Pro Late 2011. Yes I am sure that it is Late 2011 because I looked up the serial number and the website says it is indeed MacBook Pro Late 2011. I just bought an Apple TV and I want to use Airplay but I CANNOT find the Airplay icon on the upper right menu bar. I updated my software and everything but I still dont see it! What do I need to do inorder for me to use Airplay? PLEASE HELP!!!!!!!!

    What Mac do you have? It needs to be at least 2011
    OSX needs to be at least 10.8
    Has nothing to do with Internet, you need to check your local network and also make sure both ATV and Mac are on the same network. Airplay should also be enabled on ATV

  • I have a Macbook Pro early 2011. i don't have AirPlay on my computer. How can I get it. I have read that early 2011 should have the AirPlay option. Any ideas please.

    I have a Macbook Pro early 2011. i don't have AirPlay on my computer. How can I get it. I have read that early 2011 should have the AirPlay option. Any ideas please.

    Hi All,
    I need your expert advice to proceed. I bought apple TV and it works fine with my iPad and iPhones also fine with itune of my Mac Book Pro BUT I am not seeing setting which says "Airplay Mirroring" in system preference -> Display at all.
    I checked my mac serial number and it shows the model as below. As far as I understood this feature should be there from 2011 onwards.
    MacBook Pro (13-inch, Late 2011)
    Software  Mac OS X Lion 10.7.5 (11G63b)
    Please suggest!!
    Thanks and Regards

  • I have a macbook pro early 2011, and I can't use AirPlay like it says I can. I do not have the "show mirror displays" or whatever. What the heck

    I have a macbook pro early 2011, and I can't use AirPlay like it says I can. I do not have the "show mirror displays" or whatever. What the heck

    About AirPlay and Airplay Mirroring
    AirPlay Mirroring requires a second-generation Apple TV or later, and is supported on the following Mac models: iMac (Mid 2011 or newer), Mac mini (Mid 2011 or newer), MacBook Air (Mid 2011 or newer), and MacBook Pro (Early 2011 or newer). For non-qualifying Macs you can try using Air Parrot.
    Several Apple Articles Regarding AirPlay
    Apple TV (2nd and 3rd gen)- How to use AirPlay Mirroring
    How to set up and configure AirPort Express for AirPlay and iTunes
    iTunes- Troubleshooting AirPlay and AirPlay Mirroring
    iTunes- Using AirPlay
    Apple TV (2nd and 3rd gen)- Understanding AirPlay settings
    About AirPlay Mirroring in OS X Mountain Lion
    iTunes 10- About playing music with AirPlay
    Troubleshooting AirPlay and AirPlay Mirroring
    Using AirPlay
    Thanks to the $15 Beamer, AirPlay streaming is still possible on Macs  that do not support Airplay and mirroring.
    Other solutions are the Air Parrot, StreamToMe, and AirServer.

  • I have a MacBook pro late 2011 version it's not booting up so I am trying to boot from a USB recovery drive but when I select it nothing happens it jus goes to the restore options

    I have a MacBook pro late 2011 version it's not booting up so I am trying to boot from a USB recovery drive but when I select it nothing happens it jus goes to the restore options

    Bahamaguy wrote:
    I have a MacBook pro late 2011 version it's not booting up ....
    So what you want is to be able to boot from OS X and retrieve your files
    Create a data recovery/undelete external boot drive
    Of course if it's not booting up, it's easier to fix in place
    ..Step by Step to fix your Mac
    https://discussions.apple.com/community/notebooks/macbook_pro?view=documents#/
    ...so I am trying to boot from a USB recovery drive but when I select it nothing happens it just goes to the restore options
    "Recovery HD" is a partition on your boot drive which you option or commnad r key held at boot time to get into and then repair the Macintish HD partition.
    If you have this on a external USB thumb drive, then that's all it is, no OS X, programs or files.
    If your talking a USB external drive, it has to be a OS X bootable clone made with Carbon Copy Cloner or SuperDuper and the option key held at boot time gives you that boot option.
    Most commonly used backup methods
    So what your saying is you have a external clone and by holding the option key down at boot all you get is it directly going to Recovery HD?
    There is no Startup Manager option to choose what to boot from?
    This could mean Apple changed something, or your external bootable clone isn't one, or the wrong software used so it's not being recognized by Startup Manager as a bootable option.
    What did you use to make the external OS X USB bootable drive?

  • The thunderbolt firmware 1.2 update keeps reappearing. I have a MacBook Pro and 2011 Thunderbolt display. Did not discionnect when upgrading to Yosemite (only read the instructions later). Thanks.

    Hi There,
    I have a MacBook Pro (late 2011) and a Thundertbolt Display. I have recently upgraded to Yosemite. Since then Thunderbolt Firmware update 1.2 keeps reappearing and I cannot complete the update (with and without display connected etc.). Any advice? Thanks.

    Hello HTG65,
    If the Thunderbolt Firmware Update 1.2: Keeps reappearing try reinstalling it following the steps in this article.
    Thunderbolt Firmware Update 1.2: Keeps reappearing and Thunderbolt ports and Target Display Mode may not work - Apple Support
    To resolve this issue:
    Shutdown your computer.
    Disconnect all Thunderbolt devices.
    Wait 10 seconds.
    If you are using a Mac mini with a Thunderbolt display, reconnect the Thunderbolt display directly to your computer via the Thunderbolt port. Do not connect other Thunderbolt devices at this time.
    Restart your computer.
    If the Thunderbolt Firmware Update 1.2 is offered, download and install it and restart your computer when asked. If the Thunderbolt Update is not offered, the update has installed correctly.
    Reconnect all Thunderbolt devices.
    Take care,
    Nubz

  • Restoring dual boot os - windows 7 on MacBook Pro year 2011

    Hi, I have a question to ask, I bought MacBook Pro in 2011, and extended the warranty till year 2015. I wish to send my MacBook back to apple service center to restore my windows os. Forgot to mention, dual boot os is window 7 and default Mac OS. So is it possible to do so? Thanks. Any charges? The MacBook still under warranty.

    Where did you extend the warranty on a 2011 MBP to 2015?
    It is my understanding that Apple will only extend the warranty for a total of three years which would make it 2014 rather then 2015.
    As far as the Apple Service Center fixing BootCamp goes, you will need to discuss that with them. We have no connection to them what so ever and can't speak for them.
    Allan

  • I have a macbook pro 13" 2011, When my computer boots I get code on my boot up screen and then my computer shuts off and then restarts. Its an endless loop, as my computer tries to boot up.

    I have a Macbook Pro 13", that was purchased in 2010-2011. So randomly yesterday, when I boot up my computer I got to the boot screen, then code popped up on my screen. ** I have attached an image of the code below.** But after the code pops up, my computer shuts down, and tries to boot up again. This is an endless loop and doesn't get passed the boot screen. The code shows up everytime.
    I personally believe this might be a software issue and not a hardware. Please feel free to shoot out any ideas or a translation of what the code is referring to.
    THINGS I HAVE ALREADY DONE:
    - Reset the PRAM by holding CMD+Option+P+R
    - Gone into Safemode and tired to verify the Harddrive.
    - Please don't comment saying, "take out the battery." , "hold the power button for.." , None of that sh#* works.
    Below is three different links for the same image. (just in case, **** breaks).
    [IMG]http://i57.tinypic.com/2z82stl.jpg[/IMG]
    <a href="http://tinypic.com?ref=2z82stl" target="_blank"><img src="http://i57.tinypic.com/2z82stl.jpg" border="0" alt="Image and video hosting by TinyPic"></a>
    http://tinypic.com/view.php?pic=2z82stl&s=8#.U0LJidy4nFI

    What happens if you boot holding the command S keys down?
    If it stays running in single user mode
    try the command
    fsck -fy
    You could try holding the option key on bootup, to see if presents you with a startup disk however
    It looks as if you need to reistall the OS.

Maybe you are looking for