I have a MacBook Pro 15" and my warranty just ran out! I partitioned my harddrive into two partitions, one with Snow Leopard and the other with microsoft.This morning I turned on my Macbook Pro and it will not boot into Snow Leopard.

Good Morning,
I have a MacBook Pro 15" and my warranty just ran out! I partitioned my harddrive into two partitions, one with Snow Leopard and the other with microsoft.This morning I turned on my Macbook Pro and it will not boot into Snow Leopard. I shut it off took out the battery, reinstalled the battery. Then I put in the Snow Leopard CD and booted up to disk utility and The Snow Leopard partion would not show up?? I do see the microsoft partion.
I also rebooted holding down the shift key and still no Snow Leopard
Could you please tell me what I can do, what keys do I press on restart any advice to get Snow leopard back.
thank you.

Have you restarted holding down the Opt key? That procedure should give you a gray screen with all of the partitions that exist. Then select the SL partition for boot. Also go to System Preferences and Startup Disk, unlock the lock and select the SL partition as the default boot partition, then relock.

Similar Messages

In regard to Time Machine. I have two accounts one is an admin account, the other is a standard user account. When I implement Time Machine when I am logged into the Admin account, is the standard user also backed up?

in regard to Time Machine.
I have two accounts on one Macbook Pro running OS 10.6.8. One account is an admin account, the other is a standard user account.
When I initially implemented Time Machine I was logged into the Admin account. I allowed Time Machine to erase the drive and backup the computer. Is the standard user account contents also backed up?
Also after I completed the Time Machine backup session, I turned off Time Machine and removed the portable hard drive. I plan to return in to Time Machine after being away from the portable hard drive for approximately a month. After a short interruption of approximately one month, when the Macbook Pro is reconnected and Time Machine is turned back on, will Time Machine create a new instance of a backup? WIll the back up contain the standard user account changes?

Time Machine backs up by default all the user accounts.
When you reconnect the backup drive after one month, Time Machine will do an incremental backup and it might take a while minutes to hours depending on how much has been changed. With a gap of a month, Time Machine will have to do a lengthier than normal survey of both drives to see what has changed, so it might take some time preparing for the backup. The backup will include everything that has changed since the previous one.

G5 will not boot into OSX - stays at a command-line prompt

My G5 will not boot into OS X. I would appreciate and and all advice. Thanks.
What happened:
I had the G5 running one morning, with the Isight camera on, plugged into the front-console firewire port. I was running EvoCam software.
At about 2 hours into running, the cam stopped broadcasting – I got home to check it out three hours later, and the screen was black, and the fan was louder than I had ever, ever heard it on this box.
I did a hard shut-down with the powerbutton on the Cinema Display monitor.
At reboot, I see a grey screen for approx 5 seconds, with a dark grey apple logo, and then the screen goes to black, with a command-line prompt.
It’s been like that ever since.
I ran the Apple Hardware test, from the internal CD drive, and it shows no errors.
I cannot boot from an OSX installer DVD. It won’t recognize it. It goes straight to the black screen and Command line prompt.
I have re-seated the RAM, as well as the Airport Card. The only other card – which I have not re-seated, it the video card.
I am able to use the machine in Target Mode, so I can extract data from the drives, which is great. Oddly enough, I’m able to use the front-console firewire port to connect to my other Mac in Target mode – with no problems. Also – in Target mode, the fan never goes above the usual quiet self.
I would appreciate any advice one can provide. Thanks!
The machine:
Mac G5 dual 2.0 – First Generation (purchased December 2003)
It’s on it’s 3rd Motherboard – and now it’s fully out of Applecare warrantee.
OSX 10.4.9
4GB Ram
2 internal drives: 160GB + 300GB
Airport Extreme
20” Cinema Display (first generation)
Mac G5 dual 2.0 – First Generation Mac OS X (10.4.9)

Well, Apple Support does have articles on:
Isolating Issues in Mac OS X
http://docs.info.apple.com/article.html?artnum=25392
won't boot or login
http://docs.info.apple.com/article.html?artnum=106464#symp1
And if those don't work, call.
With G4 there is/was
"Fix for a Mac that won't power up
Mirrored Doors G4. When you pressed the power button, the button would light up, but the computer would not turn on. The fans on the power supply wouldn't turn on.
FIX: unplug the machine, pull the clock battery, hit the power button to discharge. Then plug it in without the clock battery. The machine should boot perfectly. Shut down, reinstall the clock battery, and now the system is fully functional. Macosxhints
http://docs.info.apple.com/article.html?artnum=300552
Reseat video? try another video card?
My Step #1 is to always boot into Open Firmware (and do reset-nvram, reset-all, if you can't do that, you are sunk).
Oh, and What do you see in verbose mode on startup?
Mac Pro 2GHz 4GB 10K Raptor 23" Cinema Mac OS X (10.4.9) WD RE RAID Aaxeon FW800 PCIe MDD-G4 APC RS1500 Vista

My iMac will not boot through Snow Leopard but will boot through Windows OS

My 2010 iMac will not boot in Snow Leopard, only Windows. Have tried reinstalling Snow leopard a few times and works only for a couple of minutes before freezing and doesnt reboot. Windows works perfect. Snow leopard just doesnt want to boot up past the Apple Logo. It was working fine one day and the next day it froze up and was able to reboot back into Snow Leopard but kept freezing. Now it doesnt load at all into Mac OS.
Brian

Possible scenarios:
1: The 10.6.3 SL retail disk is bad, it happens.
2: Your not using the 10.6.3 SL retail disk but one from another machine which doesn't have the drivers for that machine.
3: Your optical drive is funky or some other hardware issues.
4: Your trying to install 10.6 onto a PowerPC based Mac, no can do.
5: Your not using a wired keyboard for boot key commands, have some other hardware conflicts.
Possible solutions.
1: Copy the SL 10.6.3 disk using Disk Utility to another DVD, the error checking may resolve the original disk's issue.
http://www.brokenhomeboy.co.uk/pierow/blog/2011/10/make-a-bootable-backup-snow-l eopard-install-disc/
2: Make a SL bootable USB
http://www.maciverse.com/install-os-x-snow-leopard-from-usb-flash-drive.html
3: Call Apple for a new 10.6.3 disk (and make copies for backup before Apple discontinues selling it)
If your upgrading to 10.6 to get to 10.6.8 to upgrade to 10.7, be warned of this:
1: Your 10.5 software will not work in 10.7, no more Rosetta or PPC based code.
2: Your hardware will not qualify if it's a 32 bit Intel Core Duo, also you may experience slowdowns in performance over 10.6 (10.6 is the fastest OS X version for Intel Macs) in older Intel hardware (I suggest Early 2011 Mac's and later only for Lion)
3: Mountain Lion 10.8 is reportingly coming out this summer and will not run on a lot of older Intel based Mac's because of heftier graphics requirements.
4: 10.6 has the widest range of current avaialble software and drivers for third party hardware.
My advice, stick with 10.6.8 and stay there, buy a new Mountain Lion machine after this summer. Skip Lion completely.

Installed Leopard 10.5.1, Will not boot into Win XP

I installed Leopard recently on my work laptop.
Before it had 10.4.11 and Win XP properly working on it.
Now after Leopard was installed, It will not boot into Win XP,
just gives a Black Screen and never progresses past that,
I hard reboot, and it boots fine back into Leopard.
All software updates up until 10.5.2 have been applied,
will applying 10.5.2 fix this issue?

All my financial records are on the Windows side of the iMac. I've used BootCamp for more than a year, I have MacOS 10.5 (very recently updated from 10.5.1 to 10.5.2), and there has been no problem with starting Windows until today. When I restart and hold down the option key, it always boots up into the MacOS. How do I get Windows?

My iMac will not boot into the Apple Hard Ware test. Why is this?

I have a late 2012 27 inch iMac. It will not boot into the Apple Hard Ware test. I do have File Vault turned on. Will this stop it from booting in to the test?

See Using Apple Hardware Test. For some Apple computers that shipped with OS X Lion, if Apple Hardware Test cannot be found on the hard drive, an Internet-based version starts up instead. An Internet-enabled connection via ethernet or Wi-Fi is required to use this feature. Some computers that shipped with Lion require a software update to use this feature. See Computers that can be upgraded to use OS X Internet Recovery for more information.
Note: your machine cannot be running Mac OS X (10.6.7).
27" i7 iMac (Mid 2011) refurb, OS X Mavericks (10.9.4), ML & SL, G4 450 MP w/Leopard, 9.2.2

I have two computers, one runs Windows 8.1, the other runs Windows 7.

I have two computers, one runs Windows 8.1, the other runs Windows 7. Can I put Premier Pro, or any of the suite, on both computers at the same time?

Cloud License allows 2 activations http://www.adobe.com/legal/licenses-terms.html
-Install on a 2nd computer http://forums.adobe.com/thread/1452292?tstart=0
-Windows or Mac does not matter... 2 on the same operating system, or 1 on each

Hi Guys this morning I turn on my macbook pro 13 retina and light white smoke came off, the laptop have only 2 weeks brand new.

Hi World just this morning I turn on my brand new macbook pro 13 just 2 weeks old and slight white smoke came off the laptop.
Any help!!!!
Thanks.

Make srue you have got a backup of your files and take it to an Apple Retail Store or reseller.
The MacBook has failed. As your MacBook is in warranty, you will probably receive a new one instead of getting it repaired

Machine will not boot into Windows!!

I formatted a 32 GB partition in NTFS, then successfully installed Windows XP Pro along with Leopard Bootcamp drivers. All was well. And then I tried to restart.
I held the "Option" key until the Mac OS and Windows drives showed. Selected the Windows drive and clicked on the arrow. Nothing happened except for the cursor freezing in position and the drive eventually spinning down. A light touch on the power button shut the machine down.
I have tried selecting the Windows drive as the default startup disc in System Preferences, no dice.
What have I done wrong? What can be done to repair the issue? I need help, wife about to start throwing stuff
All the best,
Chumpy

Odd thing I noticed. When installing the Windows XP Pro, new full installation disc, not repair disc, I had to shut down before installing the Leopard disc and loading Bootcamp and Leopard drivers because I ran out of time. The machine booted right into Windows the next time I tried. Then, after loading Bootcamp and drivers off Leopard disc the machine will not restart into Windows.
I have tried to do it by selecting it as the default drive and by pressing "Option" and selecting the Windows drive. Neither approach does anything. Literally. The optical drive and the harddrive eventually spin down and the machines white screen is frozen.
So, I have redone the partition in Bootcamp Assistant. When I try to boot to the installation disc now, it won't go. For some reason this is just not working at all.
Frustrated,
Chumpy

IMac will not boot into OSX after startup disk switch in control panel.!

I am having trouble with my son's iMac DV SE (graphite) running Classic and OSX (10.3.9). Typically, the computer runs in OS9 as the startup system because most of the kids' software we run is old and uses Classic. Over the weekend, I changed the startup disk to OSX in the control panels and restarted the computer so I could install some new software. The computer will not boot past the gray apple and progress indicator. I have tried resetting the PRAM, booting from the CD and restarting with the options key depressed to no avail. (Can't do a Safeboot either.) I was able to put the iMac into target mode and access the control panels via my laptop and restart in OS9. I thought I had resolved the issue causing the startup problem, but I was wrong. Now I can't get past the gray apple or access the hard disk through target mode (the iMac hard disk does not appear on the laptop's desktop). Is there a way to force the computer back into OS9 other than holding down the option key at startup? When I try this, I get the hard disk icon, but I can't move it off of OSX. Thanks in advance for any help.

Is there a way to force the computer back into OS9 other than holding down the option key at startup?
Holding down the OPTION key will only work if OS 9 is on a different partition than the OS X installation. If they are on the same partition, it won't work.
One way to get it back to OS 9 is to boot from the OS 9 or OS X installation disc. Then set the control panel, or preference pane, to boot from the OS 9 installed on the hard drive.
Another way is to boot from the OS 9 install disc and perform a clean install of OS 9. This will create a new OS 9 System folder and it will NOT touch any other files on the drive. KB 58176, Mac OS 8.5, Mac OS 9: Performing a Clean Installation

Macbook pro will not boot after snow leopard upgrade

My GF has had a macbook pro since mid 2008. It's been running like a champ since I've known her for the past 3 years with no issues. It has/had OSX 10.5.8 installed. We tried to consolidate all our pictures from all our apple devices and realized she didn't have an icloud on the old 10.5.8 OSX. So I called apple and they told me to order and install the snow leopard OSX 10.6 first and then upgrade to lion etc after that, Well we got the disk yesterday popped it in to install and it's been a disaster.... the computer shutdown for what looked like a normal restart during the installation process and never booted back up. Attempts to manually reboot leave us locked on a grey apple logo screen with spinning gear indefinately whith the Snow Leopard disk installed during boot up. With the disk removed I get the flashing file folder with a question mark. I called apple support we tried all the PRAM and SMC resets and then decided that we should go to the Genius Bar once all those failed. After an hour and a half drive to the nearest genius bar we were told that the we suddenly had a hardware issue which just happened to coincide with the new OS installation.... I'm not buying it and am looking for some help. The macbook was running like a champ until we inserted a disk recommended by apple... Any takers?

You have a five year old computer, so a failing hard drive at this point is not so strange. You have a couple of options you can try. Start with this one, but if it does not work you will have to erase the hard drive. I hope you have a backup of all your files.
Reinstall OS X without erasing the drive
1. Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Reinstall Snow Leopard
If the drive is OK then quit DU and return to the installer. Proceed with reinstalling OS X. Note that the Snow Leopard installer will not erase your drive or disturb your files. After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
Download and install Mac OS X 10.6.8 Update Combo v1.1.

I have 2 Macbook Pros. One is a mid 2010, the other is mid-2012. I'm upgrading my 2012's memory which will free up the two 4GB ram chips in the machine. Can I use those chips to replace the two 2 GB chips in the 2010 Macbook Pro?

By upgrading my MacBook Pro mid 2012 computer to 16 GB I will have 2 - 4GB Ram chips unused. Can I put those 2 - 4GB chips into my MacBook Pro 2010 computer to replace the 2 2GB chips that are installed in that, which would upgrade its memory also.

You can install them but they will not work. The RAM specifications for those two models are different.
The 2010 MBP RAM specifications are: 204-pin PC3-8500 (1066 MHz) DDR3 SO-DIMM
The 2012 MBP RAM specifications are: 204-pin PC3-12800 (1600 MHz) DDR3 SO-DIMM
Ciao.

Macbook pro will not boot into Mac OSX

When i got my MacBook Pro it would boot into Mac OSX fine. Now it wont even give me the option and will only let me boot into Windows which i have running through bootcamp. I have tried reinstalling MacOSX but my OSX installion DVD will not get recognised and i cannot boot off it either. I have tried using 2 other discs still with the same issue. The confusing thing is that the CD/DVD drive works fine and the MacOSx discs work fine in other macs as i have tried it in my brothers machine.
Any help appreciated.
Thanks

I don't think that the laptop even has Mac installed anymore becuase in an attempt to reinstall Mac the partition was formatted. And I can't boot of the disc becuase it just ejects by itself after a few seconds in the drive.

Macbook Will Not Boot After Updating Leopard

I just reinstalled Leopard after having some trouble with my partition tables, and everything ran smoothly and worked fine. After the install I let software update update everything including the 10.5.5 update. It prompted me to reboot, and when I did it got to the grey Apple screen and the thing spun for about 30 seconds before it restarted and did it again. This happened a few times and then I booted from a Leopard disk to look at disk permissions and they seem to be fine. Anyone have any idea why this is happening or how I would fix it?
Thanks in advance, hope to get this sorted out quickly, I thought I had finally gotten my computer working fine again when I reinstalled Leopard. :P

At start up, press 'C' to boot directly from a CD/DVD. Or, you can press 'Option' and you should get a list of bootable selections (CD/DVD, external hardrives) that you can boot from - assuming you have something that IS bootable.
I recently had a problem and ended up reinstalling my OS (via TimeMachine). I also confirmed that you can boot from your original OSX install disk. As part of this process I also discovered I could NOT boot directly FROM the AppleCare provided TechTools Deluxe disk. Supposedly you can boot INTO that disk via a restart but that seems kind of silly to me.
However, if you have signed up for AppleCare and go to the Apple Support web site, you can download TechTools Deluxe and it can be made bootable by burning the .dmg file via Apple Disk Utilities. I don't understand Apple logic of not making the provided AppleCare TechTools Deluxe disk bootable.

MBA Black Screen - and ALWAYS is black (will not boot into OS)

I've read and done everything. Many are saying they are able to get a restart and change settings - but I can not get pas the black screen at all. I continue to do a hard restart, it goes to black screen. I use the control-option-shift-power, and it powers back to the gray screen, then black again. I do the command-option-p-r and it goes to gray screen then black. I can't get it into the OS to even change the settings.
I even tried the connection to a TV and it also is black. This is a constant cycle to the black screen.
I don't know what version the OS today, but I know I have updated once in the last 30 days, but not in the last 2 weeks (manually, I have not).
Any advice to get to the home OS screen, so I can adjust settings?
2012 MBA

OS is 10.9.2.
I booted into command-r to get to the Time Machine backup from Jan 25th of 2014. I have a screen that I can see, but when I restart (I have not restored from backup), it goes back to black screen. I AM WONDERING now if I should just restore, then work on the settings for the black screen ??

I have a MacBook Pro 15" and my warranty just ran out! I partitioned my harddrive into two partitions, one with Snow Leopard and the other with microsoft.This morning I turned on my Macbook Pro and it will not boot into Snow Leopard.

Similar Messages

Maybe you are looking for