I have a macbook pro 2009 and I want to find out what the refresh rate is, I need it to be 70 hz
I need to find out what the refresh rate is. I went into system preferences and clicked on display, and saw refresh rate, but it said n/a. I need mine to be at least 70 hz, I can't find the answer anywhere.
Where did you search? Read the information from Kappy in - https://discussions.apple.com/thread/3298134?start=0&tstart=0
Similar Messages
-
Good Morning,
I have a MacBook Pro 15" and my warranty just ran out! I partitioned my harddrive into two partitions, one with Snow Leopard and the other with microsoft.This morning I turned on my Macbook Pro and it will not boot into Snow Leopard. I shut it off took out the battery, reinstalled the battery. Then I put in the Snow Leopard CD and booted up to disk utility and The Snow Leopard partion would not show up?? I do see the microsoft partion.
I also rebooted holding down the shift key and still no Snow Leopard
Could you please tell me what I can do, what keys do I press on restart any advice to get Snow leopard back.
thank you.Have you restarted holding down the Opt key? That procedure should give you a gray screen with all of the partitions that exist. Then select the SL partition for boot. Also go to System Preferences and Startup Disk, unlock the lock and select the SL partition as the default boot partition, then relock.
-
What is ilife ?? is it comes with macbook pro 13in ?? how to find out in the system
what is ilife ?? is it comes with macbook pro 13in ?? how to find out in the system?? I am using OSX 10.8.5
These are the iLife applications:
http://www.apple.com/ilife/
They come with every new Mac. If they are not in your applications folder, download them from the App store.
Ciao. -
My 2009 Macbook Pro's Safari doesn't show the tool bar anymore. I can click on a diagonal arrow in the upper right corner that appears when I put my cursor there and the tool bar will show, but then it disappears again. Also, when I get an email and click on an internet link the Safari doesn't open full page like it used to - it opens as a small little box and I have to click the diagonal arrow in upper right corner for it to open full screen. Any ideas how to correct this - it is so annoying. Thanks for any help!
The "restore disk" is built into the Mac. See About Recovery.
Need more specifics about what error messages you got while installing Adobe Flash.
However, you can almost avoid Flash altogether by setting YouTube to play the HTML5 version instead.
Click the Try something new! link at the bottom of the YouTube page.
I don't know about the sound issue. Might be hardware as you think. Try other headphones to check. -
hello.
I got my macpook pro in july 2009 so the warrenty has ran out. Today, after a while just typing away I tried to save the document and went to click on the save icon and found that I had selected selected everything in the document and then the left clicker stopped regsitering. The right click worked just fine but it would like the left click didnt exist and it wouldnt let me do it. I have a mouse, and at first I thought it was the mouse. But it wasnt registering on the trackpad either, so its definitely the laptop itself not getting the signals for a left click.
I then restarted the laptop and it was back to normal. So i thought it was just a glitch. but it happened again after about an hour after restarting the laptop. So I gave up on the laptop and then out for dinner, came home to find that it happened after about 30 mins of being on the internet.
Ive tried looking for similiar threads but it seems like for other people its something to do with the battery on their laptop or just on their track pads thats not registering. For me, it's not registering on my track pad and every mouse I have in my house to test it with.
Please help, it is VERY VERY much appreciatedThat disk from her computer is a machine specific version, you need this disk
http://store.apple.com/us/product/MC573Z/A
and follow these instructions
How to erase and install Snow Leopard 10.6 -
I just dont see a port usable for a second screen. I want to hook it up to my TV to view photos and movies. What can I do?
What do you mean you don't see a port? Does your computer have a HDMI or a ThunderBolt/Mini Display port? You can use these to add a second display. Which one you use depends on what input ports your tv has.
-
Here is my activity monitor
1594
Activity Monitor
hajtum
4.5
2
18.2 MB
Intel (64 bit)
382
Adobe Reader
hajtum
0.4
13
14.3 MB
Intel
275
AppleSpell.service
hajtum
0.0
2
9.5 MB
Intel (64 bit)
173
Belkin Router Helper
hajtum
0.0
2
1,004 KB
Intel
183
Belkin Router Monitor
hajtum
0.0
5
9.0 MB
Intel
200
com.apple.dock.extra
hajtum
0.0
2
8.1 MB
Intel (64 bit)
1599
CVMCompiler
hajtum
0.0
1
19.7 MB
Intel (64 bit)
731
DashboardClient
hajtum
0.0
9
15.6 MB
Intel (64 bit)
239
dbfseventsd
hajtum
0.0
1
136 KB
Intel
134
distnoted
hajtum
0.9
9
4.0 MB
Intel (64 bit)
150
Dock
hajtum
0.0
3
9.8 MB
Intel (64 bit)
182
Dropbox
hajtum
0.1
30
35.1 MB
Intel
153
Finder
hajtum
0.0
5
70.1 MB
Intel (64 bit)
159
fontd
hajtum
0.0
2
5.4 MB
Intel (64 bit)
248
Google Chrome
hajtum
0.9
37
183.7 MB
Intel
279
Google Chrome Helper
hajtum
0.0
5
106.3 MB
Intel
1286
Google Chrome Renderer
hajtum
0.0
10
50.1 MB
Intel
1533
Google Chrome Renderer
hajtum
0.1
10
53.5 MB
Intel
1186
Google Chrome Renderer
hajtum
0.0
10
58.5 MB
Intel
443
Google Chrome Renderer
hajtum
0.0
10
29.0 MB
Intel
259
Google Chrome Renderer
hajtum
0.3
10
857.5 MB
Intel
1566
Google Chrome Renderer
hajtum
0.1
11
74.9 MB
Intel
267
Google Chrome Renderer
hajtum
0.9
17
265.4 MB
Intel
1588
Google Chrome Renderer
hajtum
0.0
10
74.3 MB
Intel
254
Google Chrome Worker
hajtum
0.0
11
26.9 MB
Intel
1149
Google Chrome Worker
hajtum
0.0
10
69.9 MB
Intel
257
Google Chrome Worker
hajtum
0.0
10
16.4 MB
Intel
253
Google Chrome Worker
hajtum
0.0
10
19.6 MB
Intel
256
Google Chrome Worker
hajtum
0.0
10
22.1 MB
Intel
268
Google Talk Plugin (Chrome Plug-In Host)
hajtum
0.0
5
7.5 MB
Intel
269
GoogleTalkPlugin
hajtum
0.1
11
23.5 MB
Intel
181
GrowlHelperApp
hajtum
0.0
5
12.5 MB
Intel (64 bit)
176
HSMMonitor
hajtum
0.0
3
5.8 MB
Intel (64 bit)
245
Image Capture Extension
hajtum
0.0
2
5.8 MB
Intel (64 bit)
167
imagent
hajtum
0.0
4
3.0 MB
Intel (64 bit)
126
launchd
hajtum
0.0
2
1.1 MB
Intel (64 bit)
39
loginwindow
hajtum
0.0
3
27.9 MB
Intel (64 bit)
918
lsboxd
hajtum
0.0
2
1.6 MB
Intel (64 bit)
165
mdmclient
hajtum
0.0
2
4.1 MB
Intel (64 bit)
130
mdworker
hajtum
0.0
4
14.7 MB
Intel (64 bit)
149
pboard
hajtum
0.0
1
288 KB
Intel (64 bit)
191
Router Manager
hajtum
0.0
5
3.6 MB
Intel
261
Shockwave Flash (Chrome Plug-In Host)
hajtum
11.9
18
217.3 MB
Intel
175
SpotifyWebHelper
hajtum
0.0
3
1.3 MB
Intel
152
SystemUIServer
hajtum
0.0
2
14.9 MB
Intel (64 bit)
151
talagent
hajtum
0.0
2
4.9 MB
Intel (64 bit)
144
UserEventAgent
hajtum
0.0
3
6.6 MB
Intel (64 bit)
161
warmd_agent
hajtum
0.0
2
396 KB
Intel (64 bit)There is excessive swapping of data between physical memory and virtual memory.
That can happen for two reasons:
You have a long-running process with a memory leak (i.e., a bug), or
You don't have enough memory installed for your usage pattern.
Tracking down a memory leak can be difficult, and it may come down to a process of elimination.
In the Activity Monitor application, select All Processes from the menu in the toolbar, if not already selected. Click the heading of the Real Mem column in the process table twice to sort the table with the highest value at the top. If you don't see that column, select
View ▹ Columns ▹ Real Memory
from the menu bar.
If one process (excluding "kernel_task") is using much more memory than all the others, that could be an indication of a leak. A better indication would be a process that continually grabs more and more real memory over time without ever releasing it. Here is an example of how it's done.
The process named "Safari Web Content" renders web pages for Safari and other applications. It uses a lot of memory and may leak if certain Safari extensions or third-party web plugins are installed. Consider it a prime suspect.
If you don't have an obvious memory leak, your options are to install more memory (if possible) or to run fewer programs simultaneously.
The next suggestion is only for users familiar with the shell. For a more precise, but potentially misleading, test, run the following command:
sudo leaks -nocontext -nostacks process | grep total
where process is the name of a process you suspect of leaking memory. Almost every process will leak some memory; the question is how much, and especially how much the leak increases with time. I can’t be more specific. See the leaks(1) man page and the Apple developer documentation for details. -
Macbook pro laptop stolen - any way to find out what the serial number of it was ? I didn't keep a note of it and don't have the original receipt / box.... thanks
The only other way would be through Apple, assuming you bought it at an Apple store or at least registered it. Stop by the store or call their support number.
-
I have a Macbook Pro 2009, i upgraded from 10.5 to 10.8.2 and now when I put it to sleep it shuts down. Does anyone know how to fix this?
That disk from her computer is a machine specific version, you need this disk
http://store.apple.com/us/product/MC573Z/A
and follow these instructions
How to erase and install Snow Leopard 10.6 -
I have a Macbook pro 2009 with Snow Leopard. Which system can I install without running into complicated problems which I will not be able to solve by myself- a person with limited problem solving abilities. (Mountain Lion, Mavericks, Yosemite?)
It will make it easier to help you w/ your problem to know the size and RAM installed.
"Yesterday I couldn't update the maps on my Garmin because it said the OS I had wouldn't work"
What OS will your Garmin work with? Funny there was someone else that did that and upgraded to Yosemite and regretted it.
I'd say Lion if your Garmin is compatible.
Both Lion and Mountain Lion are downloadable from the Apple Store:
http://store.apple.com/us/product/D6106Z/A/os-x-lion
http://store.apple.com/us/product/D6377Z/A/os-x-mountain-lion
The OSs will get more resource hungry the higher you go. -
before i buy the complete creative cloud, how many computers can i install it on with the one subscription? i have a macbook pro laptop and a iMac desktop, which i both need it on.
Creative Cloud Help | Creative Cloud / Common Questions
"Can I use the software I download from Creative Cloud on more than one machine?
Yes. Creative Cloud desktop applications can be downloaded and installed on multiple computers, regardless of operating system. However, activation is limited to two machines per individual associated with the membership. See the terms of use for more information. Learn how to deactivate a Creative Cloud license on a machine." -
I do not wish Firefox Start Page to automatically load when I turn on my computer. the help I sought gave suggestion(s) for a desktop computer to go to start menu and run a system configuration to deselect Firefox as startup - I have a Macbook Pro laptop and haven't been able to figure out where I can do the same - need assistance please
Look in System Preferences > Accounts > Login Items and remove Firefox from that list.
-
I have made a calendar in iCal on my MacBook Pro, but I cannot seem to find out how I can 'download' that same calendar on my iPhone and iPad. Does anyone know how to do this? Thanks in advance.
I have made a calendar in iCal on my MacBook Pro, but I cannot seem to find out how I can 'download' that same calendar on my iPhone and iPad. Does anyone know how to do this? Thanks in advance.
-
Hello, I have a Macbook Pro 2011, and put an SSD on it. Yesterday i upgrade to Yosemite and sadly mi trim is not supported .... I really need (and demand) a solution to this, because like i see in the manual of the mac, Iam allowed to install a disk.
Try a Safe Boot to clear the dyld_shared_cache (dynamic loader cache)
SafeBoot http://support.apple.com/kb/HT1564
Safe Boot, which automatically rebuilds this cache (among other things). -
I have a MacBook Pro (Retina) and a Sony HandyCam DCR-HC48 video Camera. The Sony only exports video via Firewire, which is not available on the Mac. Is there a firewire to USB or to HDMI adapter?
tyler57,
it would be better to direct that question to Gary Loftis, since my MacBook Pro doesn’t have a Thunderbolt port.
Maybe you are looking for
-
When I first got my phone it worked perfectly fine with the wifi. Although later on I began to have problems connecting it. It will randomly disconnect from the wifi and when I try to retype the password it tells me it is wrong, although it is right.
-
[solved] vm (virtualbox) crashes with ipod nano/touch mounted
Hi BIG EDIT: I've got virtualbox 4.0.0-3 installed. I'm running Windows xp (sp3) as a guest. USB works fine. But when I plug in my ipon nano 6g windows crashes, respectively the vm aborts. the log file ends with: 00:00:36.025 VUSB: attached '0a13ef00
-
Why my iphone send me error 1009 , i know i live in iran and ... But appstore doesn't send me error until today that i face with this error
-
Airplay - Apple TV not visible after upgrade to iOS 8.2
I upgraded my iPhone 6 Plus to iOS 8.2 and Apple TV 2G to the latest update. Now I cannot see Apple TV under Airplay. I made sure that I am on the same Wifi. Please help. Niket
-
Group 2 monitors together in a 3 monitor display
I am running 3 monitors (2x 1600x900 and 1x 1280x1024). I am using Windows 7 Enterprise. The PC I RDP into is a windows XP virtual PC with only 1 display. What I want is to setup the RDP to span the 2x 1600x900s - I can do so only by entering in a cu