I have a macbook pro and aphotosmartD110 wireless printer. I was told that if I install the printer software on my computer, it will no longer print wirelessly. Is that true and how do I scan wirelessly without loading in the software?
I have a macbook pro and a photosmart D110 printer. I was told that if I load the software for the printer onto my mac that it will no longer print wierlessly. Is that true and how can I scan wirelessly without loading the software? Also, can I just connect my mac to the printer with a cable and scan or do I need that software loaded onto the mac? Thanks for all help!
If you are running Lion then all drivers are distributed through Software Update. You do not need to install anything, other than to install the printer in System Preferences > Print & Scan. If you already added the printer while it was connected using USB, you might want to delete it and set it up again wirelessly to avoid confusion. Or, give them two distinct names e.g. "Photosmart D110 (USB)" and "Photosmart D110 (wireless)".
All scanning functions are now performed using Preview, but you can also access the scanner through the same Print & Scan preference pane, or with Image Capture.
This HP document may help explain how driver software is distributed now:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03079365&cc=us&dlc=en&lc=en &product=4144493&tmp_track_link=ot_search#N108
Similar Messages
-
I have a MacBook Pro bought in dec 2009. Currently has mountain lion osx installed. Worked like a dream until today. Randomly froze, so I restarted it. To find I got a grey screen. It wouldn't start. Also note my DVD drive doesn't work, but mountain lion was installed via App Store anyway.
So here's what I done so far:
tried resetting PRAM - No success
Done disk utility. Disk verified with no errors. I even re formatted disk. - no success starting.
Tried re installing mountain lion via download . It froze halfway installing -no success.
Tried backing up a time machine backup from my USB hard drive. It froze at 1% - no success
Tried booting from safe mode - no success
Tried the command line boot - no success.
Please someone help!Sounds like the hard dre has left the building, Died, in the Sh*tter, Gone to the hard drive resting place in the sky.
Buy a new drive connect it to the system with a SATA to USB adapter and see if you can install Mt Lion on that drive connected externally. If you can then the drive inside your system has failed.
Oh Wait!!!! You have the 2009 model. They are known for bad drive to logic board cables. So it may not be the drive itself but the cable going from the drive to the logic board. Do the same as above then if the system runs OK with the new drive connected externally install it in the system and see if it boots. If it does you are good to go. If it doesn't then it is more then likely the cable that hs failed.
I would suggest you also SAVE a copy of that download of Mt Lion and create a USB install drive from it using Lion Disk Maker, once you get your system up and running. -
I have old MacBook running OS 10.6.8 I was told in Apple Genius Bar that I need a code from apple support to upgrade to 10.7. Apple support will not help because I am have their support plan. Can some one help?
hi Samberl
thanks a lot for the fast reply.
I was dragging folders from main folders on the laptop-desktop onto the external drive icon - to copy them across....
Your suggestion sounds very promising - I didn't know about 'cloning'.
Yes the idea is to backup the laptop - I thought I would just move it all now, new - and then keep saving/dragging physically across to the new drive myself each day or two...
Would this be the sizeof the internal hard drive = c.500 gb ? = under the HD icon on desktop is written :
" 499.76gb , 311.5 gb free "
I can erase and start agin on the new external drive - so this plan is to make two partititions, rather than the one at present, and make one of them 500 gb ?
I have found CCC [carbon copy cloner] googling - looks good.
When CCC site says it backs up the hard drive - would this mean all my files [over 100 gb] that are mostly in folders on the desktop, plus the others in itunes, iphotos etc found in the HD icon, would all copy across successfully [wherever they are in the computer ] ?
thanks again, hope you can clarify these things and then I will go for it.
It would be great and amazing if this 'lack of permission' message doesn't show up in the process of doing this ccc transfer - hopeful!
Julie -
Hi Guy's,
I have run Mac for the last 10 years! I am sick to the back teeth of them now! I am seriously considering going back to Bill......
I have two Macbook pro's, they are company Macs and I own them. My sales guy has left tthe company and his Mac was a couple of years younger than
mine and a larger memory faster processor etc...
I would like to transfer all of my contents to the younger version, Iphotos, itunes, apps, docs, mail and all? Whilst retaining all of the info still on the newer version. I have backed up onto a 1Tb hard drive (iomega) and thats where the trouble has started.......
It will not let me transfer across, you know the story......different user, keychain, system already exists etc etc.
Is there an easy way of having one access (without it keeping the original user hidden away to P*ss you off from time to time) i don't want to see his name appear now or in the future, just my name, on my Macs, that I bought with, my money.........
Sorry, but really annoyed at the minute....
PJWell there is Migration Assistant in the Utilities folder and that's designed to migrate user accounts from a same or older machine to a newer one. But that comes later.
You want to retain the previous owners data but want to delete his name from the machine, so your going to need to have Admin access on that newer machine or access to his account to get the data off the machine first to a external drive by copying the users folders (music, pictures, movies, documents etc.)
To get the old user off the machine unfortunalty requires wiping the entire drive of all data, including programs installed and the operating system and all accounts, then installing OS X fresh again and setting it up like a brand new machine.
Apple squirrels the original user name all over the machine, and the only way to get rid of it all is to wipe the drive completely.
Once OS X is reinstalled, and you go through the setup process, the Setup Assistant will transfer the User account of the older machine to the newer one via Firewire Target Disk Mode, or via a external TimeMachine drive made on the older machine. Then you can transfer the user data from the backup drive you made earlier.
https://support.apple.com/kb/HT1661
Most commonly used backup methods
If this is all too much for you to grasp at this time, just take the machine's to a local Mac software service and they will do it all for you. -
It is taking nearly 10 mts for moutain lion to boot. I have used Mactune up utility to check disk status and there are no problems with the disk. Double checked with SMART utility and it reported no issues with the disk. Out of 320GB disk, 220 gb is free space in the disk
Ran anti virus to check for any virus relalted issues and found none. I have also checked programs which are part of login in User and Groups. I found only iTunes helper and unchecked the same. Post this operation, i had shutdown my pc and then re-started and am still experiencing 10 mts window for start up. I am not seeing errors in the macbook pro. can someone advise what needs to be done. do i need to reinstall mountain lion. if yes, can someone advise me how to reinstall mountain lion without erasing disk.pls refer my previous post, i have indeed checked console message. please let me know if i need to look for specific error message. i have pasted logs below from the latest PC start i did. time mentioned here is indian standard time.
03/01/13 6:43:35.000 PM bootlog[0]: BOOT_TIME 1357218815 0
03/01/13 6:53:54.000 PM kernel[0]: PMAP: PCID enabled
03/01/13 6:53:54.000 PM kernel[0]: Darwin Kernel Version 12.2.0: Sat Aug 25 00:48:52 PDT 2012; root:xnu-2050.18.24~1/RELEASE_X86_64
03/01/13 6:53:54.000 PM kernel[0]: vm_page_bootstrap: 835918 free pages and 204466 wired pages
03/01/13 6:53:54.000 PM kernel[0]: kext submap [0xffffff7f80741000 - 0xffffff8000000000], kernel text [0xffffff8000200000 - 0xffffff8000741000]
03/01/13 6:53:54.000 PM kernel[0]: zone leak detection enabled
03/01/13 6:53:54.000 PM kernel[0]: standard timeslicing quantum is 10000 us
03/01/13 6:53:54.000 PM kernel[0]: standard background quantum is 2500 us
03/01/13 6:53:54.000 PM kernel[0]: mig_table_max_displ = 74
03/01/13 6:53:54.000 PM kernel[0]: TSC Deadline Timer supported and enabled
03/01/13 6:53:54.000 PM kernel[0]: corecrypto kext started!
03/01/13 6:53:54.000 PM kernel[0]: Running kernel space in FIPS MODE
03/01/13 6:53:54.000 PM kernel[0]: Plist hmac value is 735d392b68241ef173d81097b1c8ce9ba283521626d1c973ac376838c466757d
03/01/13 6:53:54.000 PM kernel[0]: Computed hmac value is 735d392b68241ef173d81097b1c8ce9ba283521626d1c973ac376838c466757d
03/01/13 6:53:54.000 PM kernel[0]: corecrypto.kext FIPS integrity POST test passed!
03/01/13 6:53:54.000 PM kernel[0]: corecrypto.kext FIPS AES CBC POST test passed!
03/01/13 6:53:54.000 PM kernel[0]: corecrypto.kext FIPS TDES CBC POST test passed!
03/01/13 6:53:54.000 PM kernel[0]: corecrypto.kext FIPS AES ECB AESNI POST test passed!
03/01/13 6:53:54.000 PM kernel[0]: corecrypto.kext FIPS AES XTS AESNI POST test passed!
03/01/13 6:53:54.000 PM kernel[0]: corecrypto.kext FIPS SHA POST test passed!
03/01/13 6:53:54.000 PM kernel[0]: corecrypto.kext FIPS HMAC POST test passed!
03/01/13 6:53:54.000 PM kernel[0]: corecrypto.kext FIPS ECDSA POST test passed!
03/01/13 6:53:54.000 PM kernel[0]: corecrypto.kext FIPS DRBG POST test passed!
03/01/13 6:53:54.000 PM kernel[0]: corecrypto.kext FIPS POST passed!
03/01/13 6:53:54.000 PM kernel[0]: AppleACPICPU: ProcessorId=1 LocalApicId=0 Enabled
03/01/13 6:53:54.000 PM kernel[0]: AppleACPICPU: ProcessorId=2 LocalApicId=2 Enabled
03/01/13 6:53:54.000 PM kernel[0]: AppleACPICPU: ProcessorId=3 LocalApicId=1 Enabled
03/01/13 6:53:54.000 PM kernel[0]: AppleACPICPU: ProcessorId=4 LocalApicId=3 Enabled
03/01/13 6:53:54.000 PM kernel[0]: AppleACPICPU: ProcessorId=5 LocalApicId=255 Disabled
03/01/13 6:53:54.000 PM kernel[0]: AppleACPICPU: ProcessorId=6 LocalApicId=255 Disabled
03/01/13 6:53:54.000 PM kernel[0]: AppleACPICPU: ProcessorId=7 LocalApicId=255 Disabled
03/01/13 6:53:54.000 PM kernel[0]: AppleACPICPU: ProcessorId=8 LocalApicId=255 Disabled
03/01/13 6:53:54.000 PM kernel[0]: calling mpo_policy_init for TMSafetyNet
03/01/13 6:53:54.000 PM kernel[0]: Security policy loaded: Safety net for Time Machine (TMSafetyNet)
03/01/13 6:53:54.000 PM kernel[0]: calling mpo_policy_init for Sandbox
03/01/13 6:53:54.000 PM kernel[0]: Security policy loaded: Seatbelt sandbox policy (Sandbox)
03/01/13 6:53:54.000 PM kernel[0]: calling mpo_policy_init for Quarantine
03/01/13 6:53:54.000 PM kernel[0]: Security policy loaded: Quarantine policy (Quarantine)
03/01/13 6:53:54.000 PM kernel[0]: Copyright (c) 1982, 1986, 1989, 1991, 1993
03/01/13 6:53:54.000 PM kernel[0]: The Regents of the University of California. All rights reserved.
03/01/13 6:53:54.000 PM kernel[0]: MAC Framework successfully initialized
03/01/13 6:53:54.000 PM kernel[0]: using 16384 buffer headers and 10240 cluster IO buffer headers
03/01/13 6:53:54.000 PM kernel[0]: IOAPIC: Version 0x20 Vectors 64:87
03/01/13 6:53:54.000 PM kernel[0]: ACPI: System State [S0 S3 S4 S5]
03/01/13 6:53:54.000 PM kernel[0]: PFM64 (36 cpu) 0xf80000000, 0x80000000
03/01/13 6:53:54.000 PM kernel[0]: [ PCI configuration begin ]
03/01/13 6:53:54.000 PM kernel[0]: AppleIntelCPUPowerManagement: Turbo Ratios 0046
03/01/13 6:53:54.000 PM kernel[0]: AppleIntelCPUPowerManagement: (built 23:03:24 Jun 24 2012) initialization complete
03/01/13 6:53:54.000 PM kernel[0]: console relocated to 0xf80000000
03/01/13 6:53:54.000 PM kernel[0]: PCI configuration changed (bridge=16 device=4 cardbus=0)
03/01/13 6:53:54.000 PM kernel[0]: [ PCI configuration end, bridges 12 devices 16 ]
03/01/13 6:53:54.000 PM kernel[0]: FireWire (OHCI) Lucent ID 5901 built-in now active, GUID a4b197fffe353428; max speed s800.
03/01/13 6:53:54.000 PM kernel[0]: mbinit: done [64 MB total pool size, (42/21) split]
03/01/13 6:53:54.000 PM kernel[0]: Pthread support ABORTS when sync kernel primitives misused
03/01/13 6:53:54.000 PM kernel[0]: rooting via boot-uuid from /chosen: BE73913A-31AD-3011-8443-CBF5FED7F18E
03/01/13 6:53:54.000 PM kernel[0]: Waiting on <dict ID="0"><key>IOProviderClass</key><string ID="1">IOResources</string><key>IOResourceMatch</key><string ID="2">boot-uuid-media</string></dict>
03/01/13 6:53:54.000 PM kernel[0]: com.apple.AppleFSCompressionTypeZlib kmod start
03/01/13 6:53:54.000 PM kernel[0]: com.apple.AppleFSCompressionTypeDataless kmod start
03/01/13 6:53:54.000 PM kernel[0]: com.apple.AppleFSCompressionTypeZlib load succeeded
03/01/13 6:53:54.000 PM kernel[0]: com.apple.AppleFSCompressionTypeDataless load succeeded
03/01/13 6:53:54.000 PM kernel[0]: AppleIntelCPUPowerManagementClient: ready
03/01/13 6:43:36.990 PM com.apple.launchd[1]: *** launchd[1] has started up. ***
03/01/13 6:53:54.000 PM kernel[0]: Got boot device = IOService:/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/SATA@1F,2/AppleIntelPchS eriesAHCI/PRT0@0/IOAHCIDevice@0/AppleAHCIDiskDriver/IOAHCIBlockStorageDevice/IOB lockStorageDriver/TOSHIBA MK3265GSXF Media/IOGUIDPartitionScheme/Customer@2
03/01/13 6:53:54.000 PM kernel[0]: BSD root: disk0s2, major 1, minor 2
03/01/13 6:53:54.000 PM kernel[0]: BTCOEXIST off
03/01/13 6:53:54.000 PM kernel[0]: BRCM tunables:
03/01/13 6:53:54.000 PM kernel[0]: pullmode[1] txringsize[ 256] reapmin[ 32] reapcount[ 128]
03/01/13 6:53:54.000 PM kernel[0]: highWaterMark: VO[ 192] VI[ 192] BE[ 192] BK[ 192]
03/01/13 6:53:54.000 PM kernel[0]: Kernel is LP64
03/01/13 6:53:54.000 PM kernel[0]: AppleUSBMultitouchDriver::checkStatus - received Status Packet, Payload 2: device was reinitialized
03/01/13 6:53:54.000 PM kernel[0]: macx_swapon SUCCESS
03/01/13 6:43:36.990 PM com.apple.launchd[1]: *** Shutdown logging is enabled. ***
03/01/13 6:53:47.390 PM com.apple.launchd[1]: (com.apple.automountd) Unknown key for boolean: NSSupportsSuddenTermination
03/01/13 6:53:54.499 PM fseventsd[46]: event logs in /.fseventsd out of sync with volume. destroying old logs. (19 619 646)
03/01/13 6:53:54.500 PM fseventsd[46]: log dir: /.fseventsd getting new uuid: 70E015B3-1743-4179-AE1D-35C49D8FD5AB
03/01/13 6:53:54.761 PM distnoted[58]: Bug: 12C60: liblaunch.dylib + 23849 [2F71CAF8-6524-329E-AC56-C506658B4C0C]: 0x25
03/01/13 6:53:55.353 PM hidd[45]: Posting 'com.apple.iokit.hid.displayStatus' notifyState=1
03/01/13 6:53:55.000 PM kernel[0]: BCM5701Enet: Ethernet address 3c:07:54:1b:f4:64
03/01/13 6:53:55.000 PM kernel[0]: AirPort_Brcm4331: Ethernet address 28:cf:da:ef:f6:c2
03/01/13 6:53:55.000 PM kernel[0]: IO80211Controller::dataLinkLayerAttachComplete(): adding AppleEFINVRAM notification
03/01/13 6:53:55.000 PM kernel[0]: IO80211Interface::efiNVRAMPublished():
03/01/13 6:53:56.000 PM kernel[0]: Waiting for DSMOS...
03/01/13 6:53:57.178 PM appleeventsd[51]: main: Starting up
03/01/13 6:53:57.186 PM mDNSResponder[38]: mDNSResponder mDNSResponder-379.32.1 (Aug 31 2012 19:05:06) starting OSXVers 12
03/01/13 6:53:57.199 PM airportd[65]: _processDLILEvent: en1 attached (down)
03/01/13 6:53:57.253 PM hidd[45]: void __IOHIDLoadBundles(): Loaded 0 HID plugins
03/01/13 6:53:57.251 PM com.apple.usbmuxd[21]: usbmuxd-296.3 on Jul 25 2012 at 00:28:37, running 64 bit
03/01/13 6:53:57.307 PM coreservicesd[59]: FindBestLSSession(), no match for inSessionID 0xfffffffffffffffc auditTokenInfo( uid=0 euid=0 auSessionID=100000 create=false
03/01/13 6:53:57.000 PM kernel[0]: createVirtIf(): ifRole = 1 -
I was following directions on a mac board on how to share my iTunes library with my kids accounts on my computer. I must have not followed the directions correctly, as now I can not listen to any music on any account including the admin. I don't remember where I got the instructions or what I did to reverse the things that I moved. How do I restore my ability to listen to all the music that I have without re-aquiring it?
And then how do I get it so that I can share with the other accounts on my computer?
thanksWithout knowing what changes you made it's impossible to say what you can do to fix it, but I would suggest checking two things in the Preferences menu: first, under the Parental Controls, make sure you haven't disabled any of the areas that won't play; second, go into the Sharing area and uncheck the "Share library on my local network" box, then go back to the main library and see if the songs will play.
-
I have a macbook pro where is my imovie thingy
i have a macbook pro where is my imovie thingy
Bad memory.
Replace it with an 8 GB upgrade ($100). Lokup your RAM options at OWC: http://eshop.macsales.com/ and Crucial: http://www.crucial.com/ . -
Hi. I have a MacBook Pro with OS10.6.8 and cannot get internet pages to load on my WiFi network at home. My iMac, iPhone and iPad all work on this network. It is connected to the net as dropbox registers a connection and so does skype. I can connect to the WiFi in work and on other networks when travelling. However, some other networks are now starting to fail. Can anyone suggets how I can fix it, as the MBP appears to be fine, its updated with all the latest versions of software and the WiFi network is also fine....just not with my MBP??
Hi. I have a MacBook Pro with OS10.6.8 and cannot get internet pages to load on my WiFi network at home. My iMac, iPhone and iPad all work on this network. It is connected to the net as dropbox registers a connection and so does skype. I can connect to the WiFi in work and on other networks when travelling. However, some other networks are now starting to fail. Can anyone suggets how I can fix it, as the MBP appears to be fine, its updated with all the latest versions of software and the WiFi network is also fine....just not with my MBP??
-
How to print wireless? I have a MacBook Pro with Mountain Lion and printer is a Canon MP620
How to print wireless? I have a MacBook Pro with Mountain Lion and printer is a Canon MP620
http://www.usa.canon.com/cusa/support/consumer/printers_multifunction/pixma_mp_s eries/pixma_mp620#Wireless_Help
-
i have a macbook pro. i think i might have pushed some buttons that made my macbook look for a wireless keyboard.. i dont have any wireless keyboard. and now i cant use the keyboard on my macbook. how can i get the normal keyboard staring?
korgba wrote:
it pops up a script were it says that the macbook cannot find a bluetooth keyboard, and it isnt a keyboard connected
For some reason, your Mac doesn't recognise that a keyboard is present, so it looks for a wireless keyboard. The question is, why doesn't your Mac recognise that a keyboard is attached?
First, you need to make sure you remove all peripherals, especially USB peripherals (the keyboard is on the USB bus). Then restart holding down the Shift key. This should boot in Safe mode. If the computer boots normally (not in safe mode) and the keyboard is still not working, try resetting the SMC
Intel-based Macs: Resetting the System Management Controller (SMC)
<http://support.apple.com/kb/HT3964>
If that still doesn't fix the problem, then the keyboard (or its controller) is probably damaged and needs to be replaced. -
I do not wish Firefox Start Page to automatically load when I turn on my computer. the help I sought gave suggestion(s) for a desktop computer to go to start menu and run a system configuration to deselect Firefox as startup - I have a Macbook Pro laptop and haven't been able to figure out where I can do the same - need assistance please
Look in System Preferences > Accounts > Login Items and remove Firefox from that list.
-
I have a macbook pro and use BT homehub 3. can't work out how to connect my time capsule. can anyone help? thanks
Just need to plug the TC in to the hub in bridge mode.. do not try and bridge the homehub.. it is not possible with the setup BT uses.
To bridge the TC.. plug it directly into a computer by ethernet.. no other connection to the TC or the computer.
Press and hold in reset until the front LED flashes rapidly.. about 10sec.
Release the reset.
Open the airport utility and setup the TC to bridge mode.
The actual method depends on version of the OS and airport utility you use.
This is version 5.
Sorry I cannot post the v6 as I am on a snow leopard computer now. But you go to the network tab, and choose off bridge mode for method of connection. It will be NAT and dhcp by default.
Then setup wireless.. you have a number of choices here.
Either setup with the same SSID Security and password, as the homehub uses.. or a different name, and password..
Each method works fine.. but you sometimes have issues with wireless channels.. for now leave it on auto and see what happens.. if you have issues lock down the radio channels on both devices.. use one out of the following on each, 1, 6, 11 or 13 in UK.. so say 6 on the homehub then 13 onthe TC.
Update the TC.. unplug fromt the computer and plug it into the homehub.
If you have other issues with the setup tell us what OS you run so we can post suitable screenshots. -
I have a macbook pro and I connected a new iphone to my computer. Somehow all my pictures in the iphoto app deleted. How can I get them back, and no I do not have my TimeMachine On. Please help!
If you are running Lion then all drivers are distributed through Software Update. You do not need to install anything, other than to install the printer in System Preferences > Print & Scan. If you already added the printer while it was connected using USB, you might want to delete it and set it up again wirelessly to avoid confusion. Or, give them two distinct names e.g. "Photosmart D110 (USB)" and "Photosmart D110 (wireless)".
All scanning functions are now performed using Preview, but you can also access the scanner through the same Print & Scan preference pane, or with Image Capture.
This HP document may help explain how driver software is distributed now:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03079365&cc=us&dlc=en&lc=en &product=4144493&tmp_track_link=ot_search#N108 -
I have a macbook pro 13’ (late 2011) 2.8Ghz Intel i7 memory 4GB 1333 MHz DDR3 and have upgraded my OS X Lion to Mavericks 10.9.5. Everything has slowed down and the battery lasts a bit earlier. How do I go back to the older OS X Lion? Or should I improve speed differently? Would improving memory to 8GB help?
i have run the EntreCheck and here is the report:
EtreCheck version: 1.9.15 (52)
Report generated 28 September 2014 16:16:39 GMT+3
Hardware Information: ?
MacBook Pro (13-inch, Late 2011) (Verified)
MacBook Pro - model: MacBookPro8,1
1 2.8 GHz Intel Core i7 CPU: 2 cores
4 GB RAM
Video Information: ?
Intel HD Graphics 3000 - VRAM: 384 MB
Color LCD 1280 x 800
System Software: ?
OS X 10.9.5 (13F34) - Uptime: 0 days 4:59:22
Disk Information: ?
TOSHIBA MK7559GSXF disk0 : (750.16 GB)
S.M.A.R.T. Status: Verified
EFI (disk0s1) <not mounted>: 209.7 MB
Macintosh HD (disk0s2) / [Startup]: 749.3 GB (203.96 GB free)
Recovery HD (disk0s3) <not mounted>: 650 MB
MATSHITADVD-R UJ-8A8
USB Information: ?
Apple Inc. FaceTime HD Camera (Built-in)
Vodafone (ZTE) Vodafone Mobile Broadband K3565-Z
Apple Inc. BRCM2070 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Computer, Inc. IR Receiver
Thunderbolt Information: ?
Apple Inc. thunderbolt_bus
Gatekeeper: ?
Mac App Store and identified developers
Kernel Extensions: ?
[not loaded] com.ZTE.driver.ModemDriverMac (1.0.2d1) Support
[loaded] com.ZTE.driver.ZTEUSBCDCACMData (1.3.1) Support
[not loaded] com.ZTE.driver.ZTEUSBMassStorageFilter (1.3.1) Support
[not loaded] com.roxio.BluRaySupport (1.1.6) Support
[not loaded] com.roxio.TDIXController (2.0) Support
Startup Items: ?
HWNetMgr: Path: /Library/StartupItems/HWNetMgr
HWPortDetect: Path: /Library/StartupItems/HWPortDetect
StartOuc: Path: /Library/StartupItems/StartOuc
Launch Daemons: ?
[running] cn.com.zte.PPPMonitor.plist Support
[loaded] com.adobe.fpsaud.plist Support
[loaded] com.microsoft.office.licensing.helper.plist Support
[running] PPPMonitord.plist Support
Launch Agents: ?
[running] cn.com.zte.usbswapper.plist Support
[running] com.hp.devicemonitor.plist Support
[loaded] com.hp.messagecenter.launcher.plist Support
[running] Swapper.plist Support
User Login Items: ?
iTunesHelper
Dropbox
Internet Plug-ins: ?
SharePointBrowserPlugin: Version: 14.0.0 Support
FlashPlayer-10.6: Version: 15.0.0.152 - SDK 10.6 Support
Flash Player: Version: 15.0.0.152 - SDK 10.6 Support
QuickTime Plugin: Version: 7.7.3
Default Browser: Version: 537 - SDK 10.9
Safari Extensions: ?
AdBlock-2
Audio Plug-ins: ?
BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
AirPlay: Version: 2.0 - SDK 10.9
AppleAVBAudio: Version: 203.2 - SDK 10.9
iSightAudio: Version: 7.7.3 - SDK 10.9
iTunes Plug-ins: ?
Quartz Composer Visualizer: Version: 1.4 - SDK 10.9
3rd Party Preference Panes: ?
Flash Player Support
MacFUSE Support
Tuxera NTFS Support
Time Machine: ?
Time Machine not configured!
Top Processes by CPU: ?
5% Safari
3% WindowServer
2% BitTorrent
2% hidd
0% softwareupdated
Top Processes by Memory: ?
229 MB Safari
160 MB softwareupdated
156 MB com.apple.WebKit.WebContent
135 MB com.apple.IconServicesAgent
102 MB VLC
Virtual Memory Information: ?
45 MB Free RAM
1.55 GB Active RAM
1.52 GB Inactive RAM
895 MB Wired RAM
628 MB Page-ins
0 B Page-outs -
I want to share my internet connection with my iPhone via the usb cable. I have a Macbook pro. What do you think? Is this possible? And if yes, then how?
If not why option available
Thanks!What Carolyn says is correct. You can, however, share an Internet connection with your iPhone wirelessly by turning in Internet sharing (found in System Preferences > Sharing.) If your MacBook Pro is already using a wireless connection, you can just connect to the same wireless network it is using.
Best of luck.
Maybe you are looking for
-
How do you get money credited back when your child mistakenly buys an app while playing a free kids game? We need to refund the charges and apps that were mistakenly purchased by a child while playing a free kids game on Ipad.
-
Cannot find intf mapping in interface determination
Hi all, I have these bpm steps 1. Trasnformation followed by send sync. i am trying to do a receiver JDBC sync call to oracle db. 1. in my transformation i have my: 1. Request message : messageA mapped to 2.Response message JDBC request and in my syn
-
Missing some entries in trasaction OKB9 after upgrade to ECC 6.0
We're missing some entries in transaction OKB9 after the upgrade to ECC 6.0. Pariculary, a significant number of records in table TKA3C were not copied over to ECC 6.0. Have anyone experience this same problem as well. We're at the early stage of uni
-
Starting about 1 week ago all of the passwords in my "Manage Password" list under client security are gone. I know I didn't back them up, so I started to enter some of the passwords back fully intent when I had at least 10 or 15 passwords to back it
-
Problems with starting jstart.EXE (help for/from anyone needed!)
Dear all, the last days I have spent some time trying to install CE7.1 and also CE711 EHP1. The installation itself worked great: no errors were reported during intallation. But somehow the instance CE1 never starts up completely. As I have found out